Merlo Hidravlične Žlice nakup rabljenega (2.088)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45cc–65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without base plate) / 820 mm (with base plate) Table dimensions: 3000 mm x 2000 mm Clearance width: 2200 mm Bridge traverse: 2300 mm Return speed: 50 mm/s Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table size: 3000 x 2000 mm; clearance width: 2200 mm Cjdpfsr D U I Dex Aiqjhc - Bridge traverse: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Installation height: max. 1200 mm (distance from table or base plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45 cc – 65 L/min - Forward speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without base plate), 820 mm (with base plate) Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on bridge sidewall - Pressure adjustable via rotary valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase - Rotary lock for cylinder - Cylinder laterally adjustable by drive motor - Bridge traversable by drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm, long - 3 extension mandrels included (Sample photo)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Csdpfsr Etulsx Aiqohc Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Sheet length: 4065 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 18,000 kg Dimensions (LxWxH): 4850 x 3160 x 2360 mm Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 4013 offers everything needed for perfect cutting. CNC swing beam guillotine shear KKI Thanks to durable and long-lasting mechanics and hydraulics, a precise backgauge with ball screw spindle and user-friendly CNC control, Dener guillotine shears are highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, greater sheet thicknesses and cutting lengths are available on request. Dener guillotine shears owe their long service life to their particularly robust construction with fully welded frames. The entire machine body, cutting beam, and backgauge are highly resistant to twisting and deformation, thus ensuring the highest cutting quality. By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade clearance. Our strong brand KKI CNC GUILLOTINE SHEAR swing beam design Model AS 4013 offers everything needed for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low cost per piece Our strong brand KKI CNC GUILLOTINE SHEAR swing beam design Model AS 4010 offers everything needed for perfect cutting. With our patented blade support system, we can finely adjust and stabilize the upper blade, guaranteeing precise and high-quality cuts. Cjdpfx Asd Egqueiqshc A so-called banana cut is prevented. --- Technical Data: Sheet thickness: 13 mm Cutting length: 4,065 mm Cutting angle: 0.5 - 3° Number of hold-downs: 21 Backgauge: 1,000 mm via CNC Motor power: 30 kW Cutting speed (0.5 - 3°): 13–6 cuts/min Throat depth: 350 mm Oil tank: 400 liters Length: 4,850 mm Width: 2,350 / 3,160 mm Height: 2,360 mm Weight: 18,000 kg • Swing beam design • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw spindles for the backgauge • Ball transfers in table • Side gauge 1,500 mm • 2 pcs support arms 1,000 mm each • Cutting line illumination • Pivoting finger guard up to 1,000 mm Optional pneumatic sheet support, EURO 8,420,-- We have many references!

Stanje: novo, Sheet length: 3040 mm Sheet thickness: 16.0 mm Total power requirement: 30 kW Weight approx.: 15,500 kg Dimensions (LxWxH): 3870x3315x2280 mm Our strong brand KKI CNC GUILLOTINE SHEAR scissor type Model AS 3016 offers everything you need for perfect cutting. CNC scissor-guided guillotine shear KKI Thanks to robust, durable mechanics and hydraulics, a precise back gauge with ball screw, as well as a user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet metal thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, higher sheet thicknesses and cutting lengths can also be provided upon customer request. Dener guillotine shears owe their long service life to their particularly robust design with a fully welded frame. The entire machine body, cutting beam, and back gauge are resistant to torsion and deformation, ensuring the highest cutting quality. Codpod Egqyjfx Aiqjhc By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap. Our strong brand KKI CNC GUILLOTINE SHEAR scissor type Model AS 3016 offers everything you need for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, long-lasting frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs With our patented blade support system, we can finely adjust and stabilize the upper blade, ensuring precise, high-quality cuts. This effectively prevents what is known as the 'banana cut.' Technical data: Sheet thickness: 16 mm Cutting length: 3,060 mm Cutting angle: 0.5 - 3° Number of hold-downs: 16 Back gauge: 1,000 mm via CNC Motor power: 30 kW Cutting speed (0.5 - 3°): 13-6 (cuts/min) throat depth: 350 mm Oil tank: 600 liters Length: 3,870 mm Width: 2,340 / 3,315 mm Height: 2,280 mm Weight: 15,500 kg • Scissor-type design • CNC control: - Back gauge - Cutting angle - Blade gap - Cutting length • Ball screw for back gauge • Balls in the table • Side gauge 1,500 mm • 2 support arms of 1,000 mm • Cutting line illumination • 1,000 mm retractable finger guard Optional pneumatic sheet support, EURO 6,320,-- We have many references!

Stanje: novo, Sheet length: 4065 mm Sheet thickness: 16.0 mm Total power requirement: 30 kW Weight approx.: 21,000 kg Dimensions (LxWxH): 4930 x 3300 x 2220 mm Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4016, provides everything you need for perfect cutting. CNC swing beam guillotine shear KKI Thanks to robust and durable mechanical and hydraulic systems, a precise CNC-controlled backgauge with ball screw spindle, and user-friendly CNC controls, Dener shears are highly efficient production machines. Our standard portfolio includes shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 m to 6 m. Upon request, higher sheet thicknesses and longer cutting lengths are also available. The exceptionally long service life of Dener shears is due to their particularly robust, fully welded frame construction. The entire machine body, cutting beam, and backgauge are resistant to deflection and deformation, ensuring the highest cutting quality. By entering the sheet thickness and material type, the required cutting angle and blade gap are automatically calculated by the CNC control system. Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4016, offers everything needed for precise cutting. Technological Advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from reputable manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4016, includes everything necessary for perfect shearing. With our patented blade support system, the upper blade can be finely adjusted and stabilized, ensuring precise, high-quality cuts. Undesirable banana-shaped cutting is prevented. Technical Data: Sheet thickness: 16 mm Cutting length: 4,065 mm Cutting angle: 0.5 - 3° Number of hold-downs: 26 Backgauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5 - 3°): 13-6 cuts/min Throat depth: 350 mm Oil tank: 400 liters Length: 4,930 mm Width: 2,300 / 3,300 mm Height: 2,220 mm Chedpfx Asd Ehh Nsiqsc Weight: 21,000 kg Equipment: • Swing beam design • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw spindle for backgauge • Balls on work table • Side fence 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm flip-up finger guard Optional pneumatic sheet support, EURO 8,420 Numerous references available!

Stanje: novo, Sheet length: 3120 mm Sheet thickness: 6 mm Total power requirement: 11 kW Weight approx.: 6,500 kg Dimensions (LxWxH): 3840 x 2050 x 1700 mm Our powerful brand KK Kletzer NC GUILLOTINE SHEAR, swing beam version Model BS has everything you need for cutting. Technological Advantages: - Fast and precise cuts - Robust, durable frame construction - Easy operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 10 mm Cutting length: 3,120 mm Cutting angle: 2° Number of hold-downs: 15 Backgauge: 1,000 mm, CNC-controlled Motor power: 22 kW Cutting speed: 12 cuts/min Throat depth: 150 mm Oil tank: 200 liters Length: 3,850 mm Width: 2,175 / 3,060 mm Height: 1,850 mm Weight: 12,250 kg • Stable swing beam design • Blade gap adjustment via control system - Backgauge Codpofrz H Dofx Aiqohc - Blade gap - Cutting length • Ball screw spindles for backgauge • Balls integrated in the table • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Safety guard, foldable up to 1,000 mm Optional pneumatic sheet support, EUR 6,320 We have many references!

Stanje: novo, Stroke length (max.): max. 400 mm Table height: Floor to top of table 900 mm Installation height: 600 mm Speeds: Advance 120 mm/sec, Pressing 13 - 4 mm/sec, Return 170 mm/sec Pump capacity: 103 L/min (REXROTH axial piston pump) Motor: 22 kW - 1500 rpm Dimensions (LxWxH): 2000 x 3200 x 4300 mm Weight approx.: 10,000 kg Oil filling: 700 L Hydraulic double-column press 250 t KK Kletzer Capacity: 250 Tonnes (at 245 BAR) Operation: Via key switch - Manual/setup mode with two-hand operation, without light curtain - Automatic mode with two-hand operation, full speed with light curtain Chjdpsgta Rcsfx Aiqjc Main cylinder: Ø 350 mm Auxiliary cylinders: 2 pcs. Ø 80 x 60 mm Motor: 22 kW – 45 hp Pump: 103 L/min REXROTH – axial piston pump Speed: Advance 120 mm/sec, Pressing 13 – 4 mm/sec, Return 170 mm/sec Clear opening: 1100 mm Table plate: 1000 x 1000 mm, T-slotted Ram plate: 1000 x 1000 mm, T-slotted & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 900 mm (floor to top of table) Hydraulics: - Block & valves (REXROTH) (hydraulic accessories mounted on top of press) - Pre-fill valve - Hydraulic & mechanical ram safety - Pressure adjustment via PLC (min. pressure 35 t) - Speed adjustment via PLC - Pressure holding valve for 600 sec. - Air cooler (temperature adjusted via screen) - Automatic lubrication for guides (adjustable via screen) - Sides of working area enclosed with sheet metal - Guide rails for parallelism - Auxiliary motors: 5.5 kW + 2.2 kW - Auxiliary pumps: 22 cc + 5.5 cc - Safety railing around hydraulics and side ladder - Oil tank: 800 liters - Oil quantity: approx. 700 liters Control system: - SIEMENS S7-1200 - Main switch cabinet - Movable control panel - Soft starter for motor - Safety PLC: SICK - PLC display 9’’ Siemens - Two-hand operation (movable) - Linear scale for stroke adjustment 450 mm – NOVOTECHNIK - Light sensor front & rear of working area – SICK 900 + 150 mm - SECOME & Ethernet connection for remote maintenance – Siemens - Dual workspace lighting - 8 free I/Os on PLC - Automatic pressure compensation for oil loss Documentation: - Operating manual in German - Hydraulic circuit diagrams - Control schematics The price stated is approximate, as steel prices are subject to change.

Stanje: rabljeno, Maks. dolžina reza: 3050 mm Maks. debelina pločevine: 6 mm jeklo Nadzorovan zadnji prislon do 1000 mm Stranski prislon in podaljški mize Osvetlitev rezalnega roba Hidravlično nastavljanje kota rezanja Noži nabrušeni Chsdpfx Aijxta Uxoqsc Teža cca 6500 kg

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: 00034269-ERH, vrsta upravljanja: NC krmiljenje, vrsta aktuacije: ročni, delovna širina: 2.100 mm, frekvenca hodov (min.): 28 obr/min, višina mize: 800 mm, zadnji prislon: 1.000 mm, kapaciteta rezervoarja za olje: 150 l, skupna masa: 4.250 kg, skupna dolžina: 3.010 mm, skupna širina: 2.410 mm, skupna višina: 1.650 mm, število podpornih ročic: 2, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, Standard equipment: - Upper and lower blades suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, specially hardened steel - Lower blade with four cutting edges, specially hardened steel - Blade gap adjustment device - NC-controlled backgauge with ball screw - Cutting line illumination - Automatic hold-down system Chodpfx Asxwvptsiqoc - CE safety devices - Support arm with ruler and side stops - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile control pedestal with foot switch and emergency stop button - Operating manual / CE TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity at 42 kg/mm²: 6 mm Cutting capacity at 70 kg/mm²: 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 1/min Number of hold-downs: 11 pcs Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 pcs Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank volume: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg

Stanje: rabljeno, Leto izdelave: 1995, Širina lima 6000 mm Debelina lima 6 mm Razmak stuba 610 mm Upravljanje Elgo 87 P2 Ukupna potrebna snaga 15 kW Težina mašine cca. 22 t Tehnički podaci su dati od strane proizvođača ili operatera te su bez garancije. Zadržavamo pravo na međuprodaju; važe isključivo naši opći uslovi poslovanja i prodaje. Chedpfx Aieyutt Eoqoc O nama preko 400 vlastitih mašina na lageru preko 15.000 m² skladišnog prostora, dizalična kapacitet 70 t više od 10.000 artikala dodatne opreme za vašu radionicu Ako želite prodati mašine, proizvodne linije ili Vašu firmu, slobodno nam se obratite. Više ponuda možete pronaći na našoj web stranici. Pregledi su mogući uz prethodni dogovor. Radujemo se Vašoj poseti. Vaš Markus Hirsch Team

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, AMADA MODEL HFT 103, hidravlična upogibna stiskalnica z zmogljivostjo 100 ton in dolžino upogibanja 3000 mm, opremljena s CNC krmiljem CD 2000 z grafičnim zaslonom v barvah in 4 osmi. Stroj ima integrirane elektronske laserske varnostne zaščite FEISSLER, ter bočno in zadnjo varnostno ograjo z medsebojnim zaklepanjem. Model: Amada HFT 100/3 hidravlična CNC upogibna stiskalnica (downstroke) Leto: 2007 Tonska moč: 100 kN Tip krmilja: CD 2000 CNC Krmiljene osi: Y1, Y2, X, R Največja dolžina upogiba: 3000 mm Odprtina (višina): 470 mm Dolžina hoda: 350 mm Hitrost približevanja: 100 mm/s Hitrost upogibanja: 1 - 10 mm/s Povratna hitrost: 1 - 100 mm/s Moč motorja: 7,5 kW Teža: 7300 kg Codpszbql Sofx Aiqshc Dolžina mize: 3000 mm Širina mize: 180 mm Globina grla: 420 mm CNC upravljanje. Delovnih ur: 12.000. BROŠURA IN DODATNE INFORMACIJE NA ZAHTEVO.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Rezervni noži za mizne škarje Razdalja med luknjami: 190 mm Csdpfx Aioyym Rvsqjhc Skupna dolžina: 3120 mm Globina: 12 mm Širina: 57 mm Spodnji kot skupaj: 8° Zgornji kot skupaj: 6° Kontaktirajte nas za ponudbo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1969, številka stroja/vozila: 506/10/2,5, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, delovna širina: 1.030 mm, najv. debelina pločevine: 2 mm, najv. debelina jeklene pločevine: 2 mm, vhodna napetost: 380 V, vhodni tok: 13 A, vhodna frekvenca: 50 Hz, krmilna napetost: 220 V, Rabljene ročne škarje za pločevino blagovne znamke Fasti, tip 506/10/2,5, letnik 1969. Cjdpfxey Hhiaj Aiqjhc

Stanje: rabljeno, 4-jaw chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic power chuck - Chuck size: Ø 330 mm - Clamping force: max. 1500 daN - Mounting: short taper 8 Codpef Atqbefx Aiqshc - Weight: 79 kg

Leto izdelave: 2002, stanje: rabljeno, Rodos 60-tonski hidravlični stiskalnik, rabljen Štiristebrični hidravlični stiskalnik naprodaj. Leto/proizvodnja: 2002 Nazivna sila: 63 ton Nazivni tlak: 200 bar Največji hod: 250 mm Hitrost približevanja: 150 mm/s Hitrost stiskanja: 15 mm/s Povratna hitrost: 150 mm/s Največja velikost orodja: 800 mm x 800 mm Največja masa zgornjega orodja: 750 kg Masa stroja: 7000 kg Cjdpfjf A R Adex Aiqehc Število dvižnih točk: 4 Električna napetost: 400 V / 3 faze / 50 Hz Priklop na zrak: 5,5 bar Worson hidravlična podvezna blazina, tip DDC 104 Stroj je na zalogi in na voljo za takojšnjo dostavo. Po želji lahko pripravimo ponudbo za nove hidravlične c, d in h okvirne stiskalnice. Prosto stoječi hidravlični stiskalnik, kompleten s hidravlično podvezno blazino.

Leto izdelave: 2012, stanje: rabljeno, Hounsell hidravlična preša za oblikovanje z direktnim gibom navzdol H-okvir Leto izdelave: 2012 Kapaciteta: 200 ton Svetla višina (daylight): nominalno 750 mm Velikost mize (Š x D): 2100 mm x 1200 mm Največja teža zgornjega orodja: 800 kg Maksimalni sistemski pritisk: 340 bar Premer bata: 110 mm Število batov: 6 Dimenzije tesnila: 110 x 130 x 16 Chsdpfxef A R Uhs Aiqoc Konstrukcija stroja: varjen okvir Teža stroja: približno 95.000 kg Pristopna hitrost: 150 mm/s Hitrost stiskanja: 8 mm/s Povratna hitrost: 80–90 mm/s Po povpraševanju lahko pripravimo ponudbo za nove hidravlične preše s C- ali H-okvirom.

Leto izdelave: 1985, stanje: rabljeno, Rabljen HUGH SMITH 1000-tonski hidravlični stiskalnik s 4 stebri, s premikom navzdol, naprodaj. Obratovalne hitrosti: 50 mm/sek. Gravitacijski približek: 6 mm/sek. Stiskanje: 50 mm/sek. Povratek. Delovna višina: 1060 mm. Teža stiskalnika: skupno 102 t. Towler Hydraulics. Stroj je bil izvorno zasnovan za premik navzgor (glej priložene originalne načrte), leta 1985 je bil predelan na premik navzdol in obnovljen (glej posodobljene načrte) z novo elektro opremo. Na voljo povsem novi hidravlični stiskalniki tipa C, H in D – lahko vam pripravimo konkurenčno ponudbo, izdelano po vaših specifikacijah. Novi 1000-tonski hidravlični stiskalniki so na voljo po naročilu. Csdpsf A R Uzjfx Aiqjhc

Stanje: rabljeno, Leto izdelave: 1983, Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized backgauge with fine adjustment via handwheel up to 1,000 mm Cutting length limitation Blades sharpened Chjdpfsr D Tnwsx Aiqjc Weight: 6,800 kg

Stanje: novo, Schneidwerkzeuge für Blech Schneidwerkzeuge für Blech Umformwerkzeuge für Blech Heißmessing-Schmieden Heißstahlschmieden Kaltstahlschmieden Kalt geschmiedetes Aluminium & Stahl Tiefziehformen Automobil- und Ersatzteile Weiße Ware Produktinformationen: Keine Fundamentgrube erforderlich Stahlkonstruktion T-Nuten-Aufspannplatte & Stößel 8-fach geführter Stößel Verstellbarer Präzisionshub Zentrale automatische Schmierung Elektronischer Zähler, automatisiert SPS-Steuerung & Bedienbildschirm Finger-Schutzlichtschranke CE-konforme Ausführung Sondertisch & Hublänge möglich Zweihandbedienung Csdpfx Aofuancsiqehc Elektrisches Fußpedal Hydraulischer Auswerfer im Stößel Zylinderabnahme über Aufspannplatte

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, AMADA MODEL ITS2 50-20 HIDRAVLIČNA CNC UP-STROKING 5-OSNA UPOGIBNA STISKALNICA 50 TON x 2000, KOMPLETNA S CNC KRMILNIKOM OPERATEUR 1 ZA 4 OSI Chsdpfspygydjx Aiqec Elektronska zaščita Erwin Sick na stroju, bočna in zadnja preklopna ograja leto: 1993 Opis: TIP HIDRAVLIČNA ZGORAJ NAVZGOR DELUJOČA UPOGIBNA SILA: 50 TON DOLŽINA UPORABE: 2000 mm ODPRTA VIŠINA: 370 mm DOLŽINA HODA: 100 mm GLOBINA VRATU: 400 mm ŠIRINA MIZE: 60 mm ŠTEVILO OSI: 4 KONFIGURACIJE OSI: X1-X, Y1-Y2, R1-R2, HRBTNI PRISLON Možnost demonstracije pri napajanju BROŠURA IN DODATNE INFORMACIJE NA VOLJO NA ZAHTEVO

Stanje: rabljeno, Wedge bar chuck, three-jaw chuck, three-jaw power chuck -Jaws: hard -Chuck size: Ø 250 mm -Short taper mounting for: bayonet plate -Short taper mounting: Ø 139.719 mm -Taper size: 8 Chodsd E Tfpspfx Aiqec -Bolt circle: Ø 171.4 mm -Weight: 44 kg

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck, power chuck Csded A Hpwopfx Aiqohc - Chuck size: Ø 160 mm - 6 sets of clamping jaws - Weight: 17.5 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 4.000 mm, najv. debelina pločevine: 5 mm, število podpornih ročic: 3, Oprema: CE označba, Prodam; rabljena giljotina Gade, dolžine 4 metre, z ne-magnetnim opornikom za pločevino na zadnji strani. G.A.D.E. CO 40/4 je italijanska hidravlična giljotinska strojna škarja za obdelavo pločevine, del serije »Business« proizvajalca. Odlikuje jo robustna, monolitna, varjena konstrukcija, zasnovana za natančne, ravne reze v delavnicah za obdelavo kovin. Tehnične specifikacije stroja: Dolžina reza: 4050 mm / 4 metre Maksimalna debelina reza: 4 mm (običajno do 4/5 mm, odvisno od trdnosti materiala) Konstrukcija: Masivna, elektrozvarjena, monolitna konstrukcija, natančno obdelana za zagotavljanje strukturne trdnosti. Cedjztczhopfx Aiqjhc Način delovanja: Hidravlični sistem za rezanje z integriranim zadnjim omejevalnikom in podporo za upravljanje (kot so konfiguracije TRIA CNC pri izbranih različicah) / sprednji upravljalni mehanizem za zadnji omejevalnik. Ne-magnetni opornik za pločevino na zadnji strani, idealen za rezanje tankih/lahkih jeklenih pločevin.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 100 h, Oprema: Na voljo je tipska ploščica, Amada GS II 630 EVO škarje za pločevino, letnik 2018, delovna širina 3050 mm, maksimalna debelina pločevine jeklo 40-45 kg/mm2/6,35 mm, maksimalna debelina pločevine nerjaveče jeklo 60 kg/mm2/4 mm, aluminij maksimalna debelina 30 kg/mm2/8 mm. Pribor: stransko vodilo, čelni oporni drog 1 m, čelni oporni drog 1 m 2 kosa, standardna ročica za ustavljanje 2 kosa, kroglična podpora 1,5 m 3 kosi. Število rezov 15.000. Delovne ure črpalke 100 h. Zelo malo uporabljena. Chedpfeziviwex Aiqjc

Leto izdelave: 1979, stanje: dober (rabljeno), Hidravlična stiskalnica za cevi, stiskalna klešča, stiskalni stroj, stiskalna čeljust, stiskalno orodje, stiskalnica za cevi - Proizvajalec: Aeroquip, hidravlična stiskalnica za cevi tip SQM 40 - Stiskalna klešča: velikost Ø 14 do 35 mm - Dodatki: glejte slike Cjdpfxozbirkj Aiqehc - Transportne dimenzije: 635/420/V220 mm - Teža: 32,8 kg