Meba 405 Dg nakup rabljenega (1.254)

Stanje: rabljeno, Pogon . kW Pretok . kg/h Material . 6 kosov Nodpfszdu Twsx Afmjcu Tehnični podatki so podatki proizvajalca oz. upravljavca in so zato za nas nezavezujoči. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši splošni pogoji poslovanja in prodaje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, dvigalna zmogljivost 70 t več kot 10.000 artiklov dodatne opreme za vašo delavnico Želite prodati stroje, proizvodne linije ali vaše podjetje? Kontaktirajte nas. Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: rabljeno, prevoženi kilometri: 98.263 km, moč: 63 kW (85,66 KM), prva registracija: 12/1982, skupna masa: 5.000 kg, vrsta goriva: dizel, barva: modra, vrsta prenosa: mehanski, širina tovornega prostora: 2.000 mm, dolžina tovornega prostora: 4.050 mm, višina nakladalnega prostora: 1.900 mm, Leto izdelave: 1982, skupna dolžina: 6.075 mm, skupna širina: 2.120 mm, skupna višina: 2.730 mm, število sedežev: 2, Very clean Düdo as a 508 D flatbed with tarpaulin, 100% original – freshly restored and newly painted in RAL5329. From two owners: 1st owner was an authority/state police, then private, and returned to us for health reasons. Equipment: 2-seater, radio, fog lights, 3.5t ring eye towing hitch. Ncjdexp Tklopfx Afmju The 3.8l diesel engine runs perfectly, Vmax = 96 km/h, and offers plenty of torque on inclines. No pending repairs – ready to drive, fully equipped with side impact and underride protection. All 6 tires are new, exhaust system including silencer and tailpipe are new. We have thoroughly and professionally reconditioned the vehicle: - Cab dismantled, partially welded, and professionally repainted in RAL 5329 - The 508 was originally green, RAL 6029 - We then brushed and multi-layer repainted the chassis/frame and all rims; a final conservation with protective wax will be applied Fresh inspection carried out in our workshop: - Engine oil and brake fluid changed, full lubrication - Engine sealed: crankshaft seal replaced, radiator removed/reinstalled, coolant renewed - Wheel brake cylinders on both axles replaced, both starter batteries replaced Some of the tarpaulin fastening straps have been renewed. Total labor time was around 120 hours. German MOT (HU/AU) with historic vehicle certificate (H-Gutachten) new upon delivery. Also included: 2 used wheels (for the rims) and a tow bar. Flatbed dimensions: 4050x2000x1900 mm (LxWxH) +++ Subject to modifications, prior sale, and errors +++ + BP 581 H+

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 380 mm, Značilnost Vrednost Tip stroja Dvoglava kotna žaga Premer žaginega lista 380 mm Hitrost žaginega lista 2.800 min⁻¹ Moč motorja 2 × 0,74 kW (na žagarsko enoto) Obratovalna napetost 400 V / 3~ / 50 Hz Delovni tlak 7 barov Obseg zasuka 0° do 45° levo in desno Pozicije zaskočkov 15°, 30°, 45° Maks. dolžina reza pribl. 7.000 mm (odvisno od modela) Material Aluminijasti in plastični profili Nsdpfezdvniex Afmecu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, DG Line 6500 Automatic perforating/creasing machine with low pile feeder. The PIT STOP DG Line 6500 is ideal for companies offering “print on demand” and requiring high-quality products from digitally printed stock with fast and easy operation. The format is adapted for digital prints as well as book covers (books on demand) with extension 50×85 cm, without extension (standard) 50×70 cm. A standard perforating kit (optional extra) can also be attached to the PIT STOP DG Line 6500 and programmed directly via the display. Sheet size min./max.: 8×10 cm / 50×70 cm (with optional extension feeder: 50×85 cm). Sheet weight: 80 to 400 gsm Programs: 20 programs with 20 operations each Min. creasing distance: 0.1 mm Output: A4 with 1 crease – 6,500 sheets/hour Ncedey Spaqspfx Afmou Power supply: 230 Volts, 50 Hz, single phase Power consumption: 2 kW Net weight: 180 kg Dimensions: 150 × 75 × 120 cm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Edge and Disc Sander 2-in-1 SAMCO DG-60 Specification: • Manufacturer: SAMCO • Model: DG-60 • Working height: 150 mm • Sanding belt dimensions: 150 x 1870 mm • Worktable dimensions: 35 x 64 cm • Motor power: 2.2 kW • Mechanical belt tensioning and oscillation • The machine does not require a compressed air supply • Disc diameter: 600 mm • Worktable tiltable ±45° • Extraction ports: 120 mm diameter • Safety switches and CE markings • Weight: approx. 400 kg • Overall dimensions: 110 x 120 x 130 cm (L x W x H) Additional information: • Excellent, original technical and visual condition Nsdpfjvgnagex Afmjcu • The attached photos show the actual item for sale • Possibility to power up and inspect the machine on site • The listed price does not include VAT or transport costs

Stanje: dober (rabljeno), The scope of delivery includes: 01x Bracket for rear wall mesh, used Nsdpoww Alqsfx Afmecu Material color: sendzimir galvanized Diagonal length: approx. 405 mm Total width: approx. 90 mm Total depth: approx. 30 mm Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm Material thickness: approx. 3.0 mm Weight per unit: 0.660 kg Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply. These costs can be provided separately depending on the delivery location and scope of delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 124.009 h, število osi: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, two tool turrets with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant purification system and a hinged belt conveyor for efficient chip removal. If you are looking for a high-quality lathe, consider the TRAUB TNC65 DG horizontal lathe we have for sale. Contact us for further details. Njdpfoy R Uvusx Afmjcu • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis on main spindle: Yes • C-axis on counter spindle: Yes • V-axis: Yes (programmable position) • Tool turrets: 2 (turret I and II) • Driven tools on turret I: Yes • Driven tools on turret II: Yes • Number of tool stations: 10 per turret • Thread cutting: Without compensation chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant equipment: Purification system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply integrated for both turrets • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Compatible with water-based coolant Additional Equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (including preparation) • Workpiece ejector: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max. clamping diameter 60 mm Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: rabljeno, Leto izdelave: 2022, številka stroja/vozila: 0102-260011, Kaltenbach KBS750 DG Bandsaw Line with T14 Transport System Kaltenbach KBS 750 Double-Mitre Horizontal Bandsaw with LS270 NC Length Stop and T14 Transport System, configured for steel trading – operation and programming are performed via the control panel. This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsaw machine, ideally suited for cutting structural steel such as horizontal H-beams, angle steel, channel steel, flat stock, and rectangular tubes. Semi-automatic twin-column bandsaw for cutting profiles up to 16 m in length, featuring double mitre/pivot mechanism. Technical Data Cutting capacity at 90°: 750 mm × 500 mm +70°: 730 × 500 mm –70°: 710 × 500 mm +60°: 670 × 500 mm –60°: 650 × 500 mm +45°: 550 × 500 mm –45°: 520 × 500 mm +40°: 500 × 500 mm +30°: 390 × 500 mm Minimum profile cross-section: 10 × 10 mm Saw blade dimensions: 6990 × 41 × 1.3 mm, Type Bimetal M42, Z3/4 Drive power: Saw with frequency control: 5.5 kW Hydraulic unit (4.9 l/min): 1.5 kW Cutting speed: 15–100 m/min, infinitely variable from control panel Feed rate: Working feed: 0–300 mm/min Rapid advance/return: 2500 mm/min Working height: 640 mm Compressed air connection: 6–8 bar Air consumption: 500 NL/min (according to DIN 1342) Saw weight: approx. 3200 kg Saw dimensions: 3230 × 1160 × 2420 mm Electrical equipment: as per EN 60204-1 Power supply: 3 phases + N + PE / 50 Hz Power requirement: 17 kVA Fuse protection: 35 A Kaltenbach KBS 750 DG Machine Equipment Very robust twin-column guide for maximum precision Angled saw bow for higher performance and accuracy Nedpfx Aey Rimusfmocu Automatic table lowering during material transport Infinitely variable speed control via frequency inverter Hydraulic blade feed, manually adjustable NC-controlled mitre angle adjustment with absolute encoder Automatic cycle: clamping – sawing – unclamping Horizontal clamping device: Fixed front stop, opposite clamping jaw via cylinder Manually adjustable pressure reduction Vertical clamping device: Directly adjacent to the saw blade; pressure manually adjustable Play-free linear guides Automatic adjustment of blade guides Automatic cutting pressure control Remote diagnosis possible (customer-supplied phone line required) Hydraulic blade tensioning with electronic monitoring Automatic blade release when idle Automatic stop in the event of blade breakage Micro-spray system for clean operation and extended tool life Integrated chip tray Separately driven chip brush Electronic slip monitoring Hydraulic heating

Stanje: rabljeno, prevoženi kilometri: 601.730 km, moč: 157 kW (213,46 KM), prva registracija: 10/1989, vrsta goriva: dizel, lastna masa: 12.320 kg, največja dovoljena obremenitev: 5.280 kg, skupna masa: 17.600 kg, konfiguracija osi: 4x2, medosna razdalja: 6.000 mm, zavore: drugo, barva: modra, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: noben, število sedežev: 2, Oprema: ABS, greljenje sedeža, kabina, kopalnica, parkirni grelec, servovolan, * German vehicle * Ideal base for conversion as a sales or exhibition bus Nodpfxovhpw Nj Afmscu * Suitable for all sales purposes such as food, tools, clothing, etc. * Shelving systems on both right and left sides * Various shelves, counters, and drawers * Continuous interior lighting * The vehicle is fully insulated and fitted with six insulated roof hatches * Also equipped with a diesel auxiliary heater and a 60-liter additional tank * Toilet compartment with WC and washbasin * Large fresh water tank and waste water tank * Electric water pump * 220–280 volt electric inverter * Power sockets * Flat floor * 2 x bench seats * ISRI air-suspended driver comfort seat * Seat heating * Sun roller blind for windshield * 6 x roof hatches with sun blinds * Loudspeaker system with microphone * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6-cylinder inline engine OM 447h * GVW: 17,600 kg * Unladen weight: 12,320 kg * For sales to commercial customers or for export (non-EU and EU), German commercial law applies. If a new roadworthiness (TÜV) inspection is desired, we can provide a quote from our partner workshops. Our offer is in general WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our website under We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods to ensure there are no misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is supplied without liability. We accept no responsibility for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: rabljeno, prevoženi kilometri: 601.730 km, moč: 157 kW (213,46 KM), prva registracija: 10/1989, vrsta goriva: dizel, število sedežev: 2, vrsta prenosa: samodejen, konfiguracija osi: 4x2, lastna masa: 12.320 kg, največja dovoljena obremenitev: 5.280 kg, skupna masa: 17.600 kg, barva: modra, medosna razdalja: 6.000 mm, voznikova kabina: drugo, Oprema: ABS, greljenje sedeža, kabina, kopalnica, parkirni grelec, servovolan, * German vehicle * Ideal base for motorhome conversion * The vehicle is fully insulated and equipped with 6 insulated roof pop-up windows * Additionally fitted with a diesel auxiliary heater and a 60-liter auxiliary tank * Separate toilet room with WC and washbasin * Large fresh water and waste water tanks * Electric water pump * 220–280 Volt power inverter * Power sockets * Continuous interior lighting * Level floor * Various shelves, counters, and drawers * 2 x bench seats * ISRI air-suspended driver comfort seat * Heated seat * Sun blind for windscreen * 6 x roof pop-up windows with sun blinds * Speaker system with microphone * Low beam headlights * Heated mirrors * ABS, ASR * Mercedes-Benz 6-cylinder inline engine OM 447h * Gross vehicle weight rating (GVWR): 17,600 kg * Unladen weight: 12,320 kg * For sales to commercial traders and for export (non-EU and EU), German Commercial Code regulations apply. If a new general inspection (TÜV) is required, we are happy to provide a quote from our partner workshops. Our offer is generally made WITHOUT a new general inspection (TÜV), WITHOUT new DGUV, WITHOUT new SP, and WITHOUT new UVV certifications. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: Njdpfx Afsvhpwvomscu We offer and strongly recommend inspection and testing of the goods to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are welcome and may be arranged at any time by appointment. All information is provided without guarantee. We accept no liability for errors or incorrect details in this offer. The buyer is obliged to inspect the condition and equipment of the goods/vehicles personally. Subject to change, prior sale, and errors.

Stanje: dober (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Dvojna kotna žaga DG79 - 2 x 2 kW - 380 Voltov - Leto izdelave: 1988 - 2100 / 3800 vrt/min - Žagin list Ø 330 mm Ncsdpsygm Aksfx Afmsu - Območje reza pri 90°: 195 x 90 mm; pri 45°: 135 x 90 mm - Najmanjša dolžina reza 500 mm, največja ca. 3300 mm - Stisnjen zrak 6-8 bar / 250 l/min - Teža: ca. 500 kg - Pnevmatska vpenjalna naprava Prevoz možen proti doplačilu! Zaradi starosti rabljene naprave je pri prodaji poslovnim strankam izključena garancija.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, AVTOMATSKA DVOGLAVNA ŽAGA ELUMATEC DG 244 + E590/3 LETNIK 2024 Nedpfjy U E Tfex Afmecu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 2.492 kg, Metal circular saw from 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It is equipped with a motorized swivel range from 22.5° to 140°, as well as a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, you should consider the Elumatec DG 244, which we offer for sale. Contact us for further information. Nsdpsyv H Tiofx Afmscu • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm • Control: E 355 (2-axis control) • Swivel range: 22.5° to 140° (motorized E-axis) • Software: Module for cross-cuts and overlengths (E355/E555) • Software interface: Integration for window construction software Additional equipment • Short length stop: Included with stationary installation • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m long, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, model krmilnika: Fanuc G-Tech 16i, dolžina mize: 500 mm, TEHNIČNI PODATKI Nedpfx Ajy Atwuefmocu Pomik X-os: 600 mm Pomik Y-os: 600 mm Pomik Z-os: 600 mm Velikost mize: 500 mm x 500 mm PODROBNOSTI STROJA Delovne ure: cca 73.000 h CNC krmiljenje: Fanuc G-Tech 16i Magazin za orodja: 120-pozicijski Notranje hlajenje: 70 bar OPREMA 6-kratni menjalnik palet 4. os Visokotlačna enota Knoll Opomba: Stroj je že demontiran.

Stanje: novo, Cutting capacity at 90°: round 240 mm Cutting capacity at 90°: square 240 x 240 mm Cutting capacity at 90°: flat 165 x 210 mm Cutting capacity at 45° right: round 195 mm Cutting capacity at 45° right: square 185 x 185 mm Cutting capacity at 45° right: flat 130 x 190 mm Cutting capacity at 60°: round 120 mm Cutting capacity at 60°: square 85 x 85 mm Motor power 1.2 kW Cutting capacity at 60°: flat 85 x 120 mm Cutting capacity at 45° left: round 170 mm Cutting capacity at 45° left: square 145 x 145 mm Cutting capacity at 45° left: flat 60 x 195 mm Cutting speed 36 + 72 m/min Saw blade dimensions 2725 x 27 x 0.9 mm Vise opening 315 mm Working height 900 mm Weight 330 kg Equipment: - Saw arm swivels from 45° right to 60° left – double mitre - Eccentric vice - Carbide blade guides - Hydraulic saw blade tensioning, tension display, blade breakage cut-out - Incl. coolant system and machine base cabinet The Z 252/DG is a semi-automatic saw for double mitre cuts from 45° right to 60° left. After the cut, the machine is stopped by a safety limit switch. The lowering speed can be continuously adjusted via the hydraulic system. The saw arm can be manually raised to any desired position after the cut; the saw arm will remain in the chosen position. Njdpfjyv I Uzsx Afmecu

Leto izdelave: 2015, stanje: rabljeno, Year of manufacture: 2015 Condition: very good Counter reading: 2,116,000 Technical specifications: Ncsdpsy Hkyzjfx Afmeu - Size – min. / max.: 80 x 100 mm / 500 x 700 mm - Minimum creasing distance: 0.1 mm - Optional perforating tools: 2/1 - 3/1 - 4/1, standard creasing kit - Output: 8,000 A4/hour - Paper weight: 80 – 400 gsm Configuration: - Creasing tool: milled, 2 grooves - Perforating tool The PIT STOP DG LINE 8000 creasing and perforating machine is based on the previous model version 6500. It is equipped with a user-friendly 7-inch colour touchscreen display and achieves speeds of up to 8,000 sheets per hour (A4 with 1 crease). It is designed primarily for small to medium-sized print jobs. The unit excels in high precision and a wide range of creasing tool settings, including the ability to use tools for tear-off perforation. The maximum sheet size is up to 50 × 70 cm, and can be extended to 85 cm in length with optional accessories. Furthermore, the device can be upgraded with an online folding unit for folding up to 450 gsm.

Stanje: rabljeno, prevoženi kilometri: 627.667 km, moč: 157 kW (213,46 KM), prva registracija: 12/1996, vrsta goriva: dizel, število sedežev: 47, vrsta prenosa: samodejen, emisijski razred: euro2, barva: modra, zavore: intarder, skupna dolžina: 11.580 mm, skupna širina: 3.060 mm, skupna višina: 2.500 mm, Leto izdelave: 1996, Oprema: ABS, elektronski program stabilnosti (ESP), nadzor oprijema, servovolan, = Additional Options and Equipment = - Heater - Refrigerator - Particulate filter - Radio - Radio/CD player - Sun visor - Tachograph = Notes = +++ Sightseeing bus with convertible sliding roof +++ +++ Very good condition +++ +++ Green emission sticker +++ Refrigerator +++ - General: Ncedpfxjy Hvkle Afmeu - Engine: Mercedes-Benz - Particulate filter - Emission standard: EURO2 - Transmission: Automatic - Total seats: 47 - Seats: 45+1+1, high/fixed - Standing places: 54 - Original mileage - Safety: - Retarder - ABS - ASR (traction control) - ESP (electronic stability program) - Passenger area: - Auxiliary heater - Refrigerator - Exterior: - Lifting/lowering system - Power steering - Tachograph with chart - Sun visor - Audio, Communication, Electronics: - Radio - Miscellaneous: - German registration certificate - Twin tyres Vehicle dimensions: length 11.58 m; width 2.5 m; height 3.06 m Tires: front approx. 60%; rear approx. 60% - Our internal vehicle number: 8381 - Errors excepted. Pictures and text may deviate from the actual vehicle. Always over 300 vehicles available. = Further Information = Transmission: 4-speed automatic Engine displacement: 11,967 cc Engine make: Mercedes-Benz

Stanje: rabljeno, Leto izdelave: 2004, potovalna razdalja osi X: 600 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, teža obdelovanca (maks.): 400 kg, skupna višina: 2.640 mm, skupna dolžina: 5.870 mm, skupna širina: 3.440 mm, skupna masa: 11.300 kg, dolžina mize: 500 mm, širina mize: 500 mm, vrtljajska hitrost (min.): 15.000 obr/min, Oprema: dokumentacija / priročnik, Matsuura Horizontal machining center Ncedpfxey N Awde Afmju CNC control: Matsuura G-tech 16i Pallet table size: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg Spindle speed: 15,000 rpm Magazine capacity: 240 If you have any questions regarding the machine, or if you would like to arrange an inspection appointment, please do not hesitate to contact us by phone or email.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, številka stroja/vozila: 2300223434, Funkcionalnost: popolnoma funkcionalen, moč: 1,5 kW (2,04 KM), vhodna napetost: 380 V, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, skupna masa: 280 kg, Oprema: CE označba, We purchased the machine new at the time, and since 2018 it has been used only occasionally for sawing operations in our production facility. Due to restructuring, the saw is now surplus and is to be sold. The machine is immediately ready for use and operates perfectly. Viewings under power on site can be arranged at short notice. We can also organize shipping quickly. BMBS 230 x 280 H-DG – Hydraulic Pivot Frame Metal Bandsaw for Mitre Cuts from +60° to -45° • Hydraulic pivot frame metal bandsaw for mitre cuts from +60° to -45° • Suitable for sawing e.g. stainless steel, tool steel, hollow sections, and solid materials • Precision and robust band guides with adjustable carbide plates • Saw band tension monitored electromechanically via microswitch • Equipped with coolant system at the band guides • With chip removal brush for optimal cleaning and maintenance of the saw band • When lifting the saw arm, the lowering cylinder is automatically locked in the upper position – no need for additional locking at the cylinder • Saw arm inclined by 25°, resulting in longer service life of the saw band • After the cutting process is completed, the saw band stops automatically • Lowering of the saw arm by its own weight or manually (H-DG) Scope of delivery: • Saw band • Coolant pump • Operating tools • Vice with quick-release mechanism Technical Data Electrical connection 400 V / 50 Hz Motor power 1.4 / 2.0 kW Speed settings 2 Saw band speeds 35 / 70 m/min Saw band dimensions 2720 x 27 x 0.9 mm Dimensions (L x W/D x H) 1650 x 885 x 1860 mm Table height (material feed) 785 mm Weight 280 kg Max. feed length per single feed Min. remnant length CNC operation Min. remnant length manual operation Cutting Ranges Cutting range 0° round profile 230 mm Njdpfxoy R Dcde Afmscu Cutting range 0° round solid 150 mm Cutting range 0° square material horizontal 280 x 180 mm Cutting range 0° square material vertical 260 x 230 mm Cutting range -45° round profile 195 mm Cutting range -45° round solid 110 mm For further cutting ranges, please refer to the documentation.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Horizontálna pásová píla Výrobca: KALTENBACH Typ: KBS 620 DG Njdpfxoy H D Rae Afmjcu Rok výroby: 2007 Technické údaje Značka: Kaltenbach Typ: KBS 620 DG Rok výroby: 2007 Pracovný rozsah: 620 x 350 mm Pracovný rozsah (okrúhly): 360 mm Rozmery pílového pásu: 6175 x 41 x 1,3 mm Rýchlosť rezu: 15–90 m/min Náklon pílového pásu: 3° Podávanie: 0–300 mm/min Rozmery píly: D 3,0 x Š 1,2 x V 2,10 m Rozmery valčekovej dráhy: D 8,6 x Š 1,1 m (vrátane dorazu) Hmotnosť: cca 2,6 t Výbava • Valčeková dráha s CNC systémom merania dĺžky, D = 8600 mm • Posuv CNC dorazu: 7200 mm • Minimálne množstvo mazania • Laserová indikácia rezu • Automatické čistenie pílového pásu • CNC riadenie Kaltenbach AS620 • CNC riadenie dorazu EPS 80 • Automatický zvislý prítlak • Automatický vodorovný prítlak Všetky údaje sú bez záruky. Predvedenie je možné kedykoľvek v našej expozícii.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 19978, potovalna razdalja osi X: 660 mm, pomik osi Y: 660 mm, pomik po osi Z: 660 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: 30i, višina obdelovanca (maks.): 850 mm, premer obdelovanca (maks.): 700 mm, teža obdelovanca (maks.): 400 kg, delovne ure vretena: 7.000 h, nosilec vretena: MK 4, število vreten: 1, Ta stroj je vrhunski proizvodni stroj. Iz več razlogov se moramo te naprave predčasno posloviti, saj moramo na to mesto postaviti 5-osni stroj. V nasprotnem primeru bi to napravo zagotovo uporabljali še vrsto let. Ncjdpfsywggljx Afmsu

Stanje: dober (rabljeno), Leto izdelave: 2000, Ponudba 24477 Tehnični podatki: Ncodpfxjy H Dmhs Afmsu - Razpon rezanja pri 90° okroglo: 220 mm - Plosko: 250 x 100 mm - Kvadratno: 170 x 170 mm - Razpon rezanja pri 45° okroglo: 150 mm - Plosko: 150 x 150 mm - Nastavitev kotnega reza levo in desno - Dimenzije tračne žage: 2890 x 27 x 0,9 mm - Hitrosti rezanja: 40 + 60 m/min - Hidravlično spuščanje žaginega okvirja - Tlak reza neprekinjeno nastavljiv: 0 - 10 m/min - Skupna pogonska moč: 400 V / 1,5 kW - Potreben prostor cca: Š 1500 x V 1000 x G 650 mm - Teža cca: 250 kg

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, lastna masa: 270 kg, nosilnost: 2.000 kg, Obračalna naprava Težiščna razdalja: 500 ISO razred: ISO razred 2 = 1.000 - 2.500 kg Ncjdoy Hmwcjpfx Afmeu Stanje: pripravljeno za uporabo in popolnoma funkcionalno Tehnično stanje: dobro Opis: V primeru dodatnih vprašanj nas pokličite. Poleg tega modela imamo na zalogi še približno 150 drugih industrijskih vozil. Oglejte si našo spletno stran fleischmann-foerdertechnik. Za vas z veseljem preverimo možnost leasinga, financiranja ter ugodne dostave. Možen je tudi odkup rabljenih Linde naprav – tudi če pri nas ne kupite nove naprave. Prikazane delovne ure so odčitanjene ob objavi oglasa. Pridržujemo si pravico do predhodne prodaje, sprememb in napak.

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, model krmilnika: E555 Touchscreen, skupna masa: 2.300 kg, dolžina rezanja (maks.): 6.000 mm, premer žaginega lista: 550 mm, največja hitrost vrtenja: 2.800 obr/min, TEHNIČNI PODATKI Maksimalna dolžina reza: 6000 mm Premer žaginega lista: 550 mm Hitrost žaginega lista: 2800 vrt/min PODATKI O STROJU Krmiljenje: E555 zaslon na dotik Dovod stisnjenega zraka: 7 barov Dimenzije in teža Dimenzije (D x Š x V): 7500 x 1500 x 2000 mm Teža: 2.300 kg Ncjdpey Egahjfx Afmeu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1982, Na voljo je Elumatec dvoglavna kotna žaga za aluminijaste in plastične profile, vključno s pozicionirno enoto E200. Zasuk rezalne glave: 45°, premer rezila: 380 mm, hitrost: 2800 obr/min, največja rezalna zmogljivost: 195 mm/120 mm, najmanjša dolžina reza: 520 mm, teža: pribl. 1000 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Nedpfoy Hk Thsx Afmjcu