Lowara Čistilna Naprava Za Pitno Vodo nakup rabljenega (84.715)

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatically operating hot water parts washing machine with basket drive via geared motor, equipped with 2 stainless steel wash pumps (manufacturer: Lowara), and 2 rotating three-sided spray systems. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 200 kg - Spray pressure: 2x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Net weight: approx. 300 kg Freely adjustable wash timer (minutes and hours) Entire cleaning machine (internal components and external cladding) constructed from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Bath cover with fine filter (2,000 micron) 2 intake filters for pump protection Steam vapor extraction including condensate return This is a showroom machine from the Glogar Technology Center. Bwsdpfx Afjhymmgjren

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L102 Automatic hot water parts washing machine with basket drive via gear motor, 2 stainless steel washing pumps (make: Lowara), 2 units of rotating 3-sided spray systems. Complete system comes fully insulated. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 200 kg - Spray pressure: 2x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 90°C) Machine dimensions (LxWxH): 1,300 x 1,250 x 1,990h mm Empty weight: approx. 300 kg Wash timer freely adjustable (minutes and hours) Complete cleaning machine (interior components and external housing) made from stainless steel 1.4301 Water circulation and loading basket from stainless steel 1.4301 Complete system insulation (tank and chamber) from stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) 2 suction filters as pump protection Operating hours counter Steam vapor extraction incl. condensate return system Oil skimmer for bath maintenance Complete system insulation Parts washer is in as-new condition (test/demo machine) Bwjdpjc S Tlaofx Afron OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 130 mm, skupna širina: 270 mm, skupna dolžina: 300 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, Elektronska naprava za doziranje vode s prikazom temperature Delta model: Economic hitro in natančno vnašanje količine vode, pregleden upravljalni panel z velikim, svetlim prikazovalnikom, kompaktno in na moko prašno odporno inox ohišje Tehnični podatki Območje doziranja: 0,1 l - 99,9 l Natančnost prikaza temperature: samo prikaz Natančnost doziranja od 1 l: +/- 0,1 l Pretok vode pri 3 bar: do 20 l/min Vodna priključitev: 3/4" zunanji navoj Bsdpfx Asy Srv Ijfrjwn Električni priklop: 100 - 240V ; 50Hz Dimenzije naprave (š x v x g): 270 x 300 x 130 mm Rabljena naprava za doziranje hladne vode

Leto izdelave: 2020, obratovalne ure: 50 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BV200219443, 🔥 Pirolizno čiščenje polžev – DEMO naprava | do Ø70 mm | Popolnoma avtomatska | 12 mesecev garancije Učinkovita in varna rešitev za odstranjevanje ostankov polimerov s polžev, ki se uporabljajo pri ekstruziji in brizganju – brez deformacije in brez potrebe po ročnem čiščenju. Popolnoma izdelano v Evropski uniji. _____ Ključne značilnosti • Primerno za vse termoplastične materiale • Največji premer polža: Ø70 mm • Vertikalni proces – brez deformacije polža • Popolnoma avtomatsko delovanje (ni potreben operater) • Čas čiščenja: 3–8 ur (odvisno od stopnje onesnaženja) • Procesna temperatura: 400–500 °C • Integriran sistem za obdelavo plinov z vodnim rezervoarjem in črpalko _____ Tehnični podatki (tip PC-70) • Največji premer polža: 70 mm • Največja dolžina polža: 2.450 mm • Največja delovna višina: 3.200 mm • Skupna priključna moč: 25 kW _____ Stanje • DEMO naprava – neposredno od proizvajalca • Odlično stanje s 12-mesečno tovarniško garancijo • Takoj dobavljivo FCA BOCO cena: 27.990,- EUR brez DDV Bwedpfx Afjy Id Tqerjn _____ Proizvajalec BOCO Pardubice Machines, s.r.o. (Češka republika) Več kot 30 let izkušenj na področju tehnologije predelave plastike

Stanje: rabljeno, popolnoma iz nerjavečega jekla premično kolotek 600 mm brezstopenjska hitrost nastavljiva delovna višina z izpihovalno napravo Bwsdpfszbi Acex Afren zunanje mere (D x Š x V): pribl. 3.400 x 1.300 x 1.900 mm

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Prostornina rezervoarja: 5 l, zmogljivost taljenja: 5 kg/h, tip lepila: granulat in bloki (termoplastično), delovna temperatura: 20-200°C, čas ogrevanja (na 160°C): pribl. 30 min, viskoznost lepila: 100-20.000 mPas, priključki za grelne cevi: 1 do 4, polnjenje: ročno ali avtomatsko (RobaFeed 3), število dozirnih črpalk: 1, tip črpalke: batna ali gerotor črpalka, napajalna napetost: 200-400 V, 1-3 LNPE, priključna moč: 1,8 kW, dovod stisnjenega zraka: 6 bar, suh, neoljen, v skladu z ISO 8573-1, razred 4, elektronika: CLS, upravljalna plošča: membranska tipkovnica (TRM), integriran sistem vodenja nanosa: Robatech ICS TRM 4, teža: 34 kg, varnostni standard: CE, CSA. Možen je ogled na lokaciji. Bwodpfx Aozadl Nofron

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 16.000 mm, The central focus is a KITZINGER contino 400/2 KLT continuous container washing system, commissioned in 2019, including the corresponding reverse osmosis unit. Additional assets include a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system, three modern industrial trucks, as well as packaging and load securing technology. All equipment is fully operational and will be sold ex works Kerpen. FINAL SALE — COMPLETE PACKAGE OR INDIVIDUAL UNITS Acquisition negotiable as a complete package or in individual lots Lease for the KITZINGER machine has been fully paid — direct transfer of ownership High-quality branded components (LENZE, EDUR, ELEKTROR, SIEMENS) — attractive resale value Ex works (EXW) — dismantling and transport to be organized by the buyer Comprehensive technical documentation and maintenance history available System I — KITZINGER contino 400/2 KLT container washing system Bwsdozazk Njpfx Afron Industrial continuous container washing system, service provider version, with three active washing zones, final rinse, and heated drying section. The entire 16.2 m machine is made with high-grade stainless steel construction, double-wall sound and thermal insulation. Manufacturer / Model KITZINGER Maschinenbau GmbH · contino 400/2 KLT Year of manufacture / Status 2016 · fully operational Machine length 16,200 mm · straight line, sequentially arranged zones Tunnel dimensions Width 410 mm × Height 410 mm · Processing width 160–410 mm Throughput rate 200–300 containers (60/40) and 200–300 lids per hour Power supply 400 V / 50 Hz / 140 kW (2 control cabinets) Noise emission ≤ 85 dB(A) according to BGN standards Premium components (brand-name — attractive resale value) ▸ LENZE drive system and frequency inverters across all zones ▸ EDUR stainless steel centrifugal pumps — Zone 1: 4 kW · Zone 2: 5.5 kW · Rinsing zone: 4 kW ▸ ELEKTROR blower motors — BS2: 2 × 5 kW · BS3H: 3 × 5 kW with 15 kW auxiliary heating ▸ SIEMENS control cabinet components in both cabinets ▸ POLO oil skimmers in washing zone 1 and washing zone 2 Three washing zones plus rinse and drying sections Loading zone 2,000 mm Stainless steel belts with cams · adjustable side guides · steam extraction hood Washing zone 1 (2,700 mm) External filter tank 1,000 l · heating 20 kW · 55°C · 1,500 l/min 1.5 bar Washing zone 2 (2,700 mm) External filter tank 800 l · heating 30 kW · 60°C · 1,500 l/min 2 bar Rinsing zone 3 (1,800 mm) External filter tank 400 l · heating 40 kW · 65°C · fresh water cascade Blow-off BS2 (1,800 mm) 2 × ELEKTROR 5 kW · adjustable stainless steel air knives Blow-off BS3H (2,700 mm) 3 × ELEKTROR 5 kW · electric auxiliary heating 15 kW Neutral drip zone 500 mm with exhaust connection Special features Fully double-wall insulated · tool-free removable spray arms System II — Filtration / Reverse Osmosis Reverse osmosis water treatment plant, significantly reducing fresh water consumption and feeding recirculated water to the three washing zones. Manufacturer / Model TopWater 401/1000 — reverse osmosis system Year of manufacture / Status 2022 · fully operational Function Water treatment, reduction of fresh water consumption Additionally, a PERKUTE Clean-O-Mat RC 122 top-loading cleaning system in SPF trolley design is available for intensive basket cleaning of smaller and heavily soiled workpieces. Manufacturer / Model PERKUTE · RC 122 (Clean-O-Mat SPF trolley) Serial-no. / Year S 1993 · 2008 Power supply 400 V / 50 Hz · 25 A Pump output 4 kW (stainless steel)

Stanje: rabljeno, Obe vročekanalni napravi podjetja Feller sta naprodaj. Bwsdpfxsza U Ego Afron

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 0164390271794, Ponuda 26137 Hidraulične kombinovane makaze za ravne profile, sa uređajem za sečenje uglova i bušilicom za probijanje rupa Tehnički podaci: - Makaze za ravni čelik - dužina noža: 360 mm - za ravni materijal: 350 x 13 mm - ili: 230 x 20 mm - Makaze za profile - L profil pod 90°: 140 x 13 mm - pod 45°: 70 x 7 mm - T-profil pod 90°: 70 mm - Makaze za šipke - okrugli čelik: 50 mm - kvadratni čelik: 42 mm - Uređaj za sečenje uglova - za materijal do: 12 mm - Pravo sečenje uglova do: 52 x 90 mm - Bušilica za probijanje rupa - sila probijanja: cca 550 kN Bodsy Uwu Uspfx Afrjwn - hod beskonačno podesiv: 0 - 60 mm - buši u čeliku do 30 mm prečnika u 16 mm debljine - radna dubina: 320 mm - Hidraulički pogon: 400 V / 5,5 kW - Dva odvojena radna cilindra sa zasebnim nožnim prekidačem - Dimenzije (približno): širina 1400 x visina 1600 x dubina 750 mm - Masa (približno): 1300 kg - Sa: raznim probijačima i matricama u posebnom ormanu za alat - Radni sto sa graničnikom - Zaustavljač

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, 1 x rabljena centralna enota za vlaženje Bsdpfx Asy Uc Slofrjwn Proizvajalec: technotrans Model: delta.d 250w Leto izdelave: 2010 Ex-Rotoman Zaslon je poškodovan, sicer popolnoma delujoč. Rezervni zaslon za popravilo na voljo, sicer primeren za razgradnjo (črpalke, elektronika, Digidos ipd.). Na voljo je tudi ustrezen agregat Spinclean.

Leto izdelave: 2010, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Dismantled prototype filling/refueling plant – special unit with V2A tanks For sale is a dismantled prototype filling and refueling system previously used in industrial applications. This is a custom-built/special-purpose unit by Evonik/Daimler AG. The system has been professionally dismantled, is in good condition, and is prepared for transport. Bwjdpfszabgwsx Afrjn Technical specifications / Equipment * Manufacturer: Evonik / Daimler AG * System type: Prototype filling/refueling unit * Model: Special plant / tank farm and filling system * Year of manufacture: 2010 * 2 tanks, each 40 m³ * 1 tank, 30 m³ * Tanks / system made of V2A stainless steel * Pumps stored separately * Pump list available upon request * Condition: dismantled, untested, prepared for transport Notes The system is sold untested due to its dismantled condition. An inspection is recommended. Technical testing, media compatibility, recommissioning, and transport organization are the responsibility of the buyer. Further information, available documentation, as well as the pump list can be provided upon request. Please contact us preferably via email. Telephone inquiries only after scheduling an appointment in advance.

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvovretenarska rezkalnica s štirimi glavami na vsaki strani (3 za rezkanje in 1 za brušenje) Moč motorjev: Leva stran: motor za rezkanje 1 = 7,5 kW motor za rezkanje 2 = 5,5 kW motor za rezkanje 3 = 3 kW (pri 1440 vrt/min) ali 5 kW (pri 2880 vrt/min) motor za brušenje 4 = 3 kW Bodpfx Afsx Hwmbjrown Desna stran: motor za rezkanje 1 = 7,5 kW motor za rezkanje 2 = 5,5 kW motor za rezkanje 3 = 3 kW (pri 1440 vrt/min) ali 5 kW (pri 2880 vrt/min) motor za brušenje 4 = 3 kW Hidravlične enote: 4,8 + 4 kW Skupna moč brez hidravličnih enot: 38 ali 42 kW Skupna moč z hidravličnimi enotami: 46,8 ali 50,8 kW Dimenzije: 7,20 x 2,40 x 1,90 m Približna teža: 5 ton.

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Bwjdpfx Afehbal Dorsn Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Stanje: rabljeno, Electronic Crane Scale MWT Type 142 Serial No.: 142571 Year of manufacture: 1993 Tensile force measuring device, crane scale Measuring range: 2,500 to 80,000 kg Minimum measurable value: 20 kg Power supply via 12 Volt battery Bwjdpfx Afog D H Rijrsn - Suspension shackle for double hook, anchor hook - Operation, saving of measurement values, and tare via remote control - Storage for measurement values (weights) - Printer for measurement values Very robust and high-quality steel body Net weight: approx. 200 kg

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Bedpfx Afsyqr Sxerjwn

Leto izdelave: 2006, obratovalne ure: 5.840 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6398921, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. Bwedpfxoy Ta Ale Afrjn ----- Tehnični podatki so navedeni v priloženem dokumentu. Brez embalaže; Če želite napravo razstaviti sami, prosimo, navedite to v vaši ponudbi. Za pravilnost tehničnih podatkov, popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih za preprečevanje nezgod, ne prevzemamo nobene odgovornosti. Vsaka garancija je izključena.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WMD 10 404. M80, Ponúkame túto použitú linku Weinmann WMD 10 na výrobu strešných a stropných prvkov, rok výroby 2003. Typ: WMD 10 Sériové číslo: 10 404.M80 Rok výroby: 2003 Zloženie: Bedsy N S I Sspfx Afrjwn - Multifunkčný most (1x píla, 1x sponkovačka) a LatTeq systém (automatické kladenie lát a 2x klincovačka) - Stôl na strešné/stropné panely, dĺžka 12 m so 4 NC osami a po 5 zvieracími pármi (upínanie do šírky 2,5 m) a polohovateľné valčeky (nepoháňané) - Montážny stôl 12 m s upínacím systémom (2x) a polohovateľnými valčekmi (nepoháňané) - Motýlový obracač Príchytky nie sú súčasťou predaja. Zariadenie bude v prevádzke približne do polovice júna a je možné si ho kedykoľvek obhliadnuť. V prípade otázok nás neváhajte kontaktovať. Pošlite nám prosím krátku správu s vašimi kontaktnými údajmi.

Stanje: pripravljen za uporabo (rabljen), Kapaciteta žaganega lesa: 1,5 m³, maksimalna dolžina žaganega lesa: 4500 mm, z nadzornim sistemom, aluminijastimi prečkami za zlaganje in kabli kot dodatki. Naprava ni bila v uporabi približno deset let, potrebno je preveriti elektroniko. Ogled na lokaciji je mogoč. Bjdpfey Uydljx Afrswn

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 200 mm, skupna širina: 500 mm, skupna višina: 1.700 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, številka stroja/vozila: 2026, +++ NOVO Lillnord klimatska naprava / klimatska naprava za fermentacijske prostore NOVO +++ Vrhunski model: PG 1000 Zmogljiv z napredno tehnologijo za vse fermentacijske prostore do 6 m² Temperaturno območje od +20 do 45°C, nastavljivo preko termostata Bedpfx Ajfvvnmjfrswn Območje vlage od 60 do 95 % rH, nastavljivo preko higrostata Samodejna regulacija vode dolga življenjska doba! zaradi preverjenega »Lillnord sistema« Mere: 500 x 200 x 1700 mm, ŠxGxV samo pri nas je preizkušen po standardu DGUV V3 Priključek 400V, 16A-CEE vtič NOVO naprava & SAB preizkušena z garancijo + servisom rezervnih delov Možnosti: Dostavna storitev Vzdrževalna pogodba Uvajanje in zagon Stojalo Leasing in najem Obiščite našo veliko skladišče pekarske opreme!

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2331 280, Wir verkaufen eine gebrauchte Bolte Pro I-2200 Bolzenschweißanlage mit Mikroprozessorsteuerung, Baujahr 2023, Seriennummer: 2331 280. Die fahrbare Ausführung der PRO-I 2200 mit zwei großen, äußerst robusten Rädern und Teleskopgriff ist ideal für den mobilen Einsatz auf Baustellen. Technische Merkmale und Vorteile: - Hervorragende Schweißqualität – Moderne Inverter-Technologie ermöglicht eine sehr präzise Steuerung und hohe Reproduzierbarkeit des Schweißprozesses - Sehr hohe Lichtbogenstabilität – auch bei kurzen Schweißzeiten und niedrigen Schweißströmen - Leistungsstark – Hoher Schweißstrom von 1050 A für einen maximalen Bolzendurchmesser von 13 mm - Schnelle Schweißfolgen durch innovatives Kühlungskonzept - Ideal für den mobilen Einsatz – deutlich geringeres Gewicht als herkömmliche Bolzenschweißgeräte - Robuste Bauweise für den Einsatz in rauen Umgebungen - Niedriger Energieverbrauch durch hohe Effizienz - Einfache Bedienung über einen sehr robusten Dreh-Druck-Schalter - Mikroprozessorsteuerung - Alle Funktionen und Parameter werden auf einem großen Display angezeigt (Displaykontrast einstellbar) - Schweißprogrammbibliothek - Schweißprogrammspeicher – 59 Programme - Schweißbereich: Ø 2–22 mm - Schweißstrom: 100–2100 A - Schweißverfahren: Bolzensetzung mit Keramikring oder Schutzgas und Kurzzeitschweißen mit/ohne Schutzgas - Schweißbare Materialien: Stahl, Edelstahl, Aluminium - Spannung: 320–495 V, 32 A, 50/60 Hz - Stromquelle: Transformator/Gleichrichter - Schweißzeit: 1–1500 ms, stufenlos einstellbar - Schutzart: IP23 - Abmessungen (B x H x T): 550 x 850 x 650 mm - Gewicht: 81 kg Die Hubzündungs-Bolzenschweißpistole GD 22 WMS ist speziell für das Schweißen von Schubdübeln mit großen Durchmessern (19 und 22 mm) konzipiert. Schweißbereich Ø 3–22 mm Schweißbare Materialien Stahl, Edelstahl Bolzenlänge 10–525 mm Schweißverfahren (nach DIN EN ISO 14555) Bolzenschweißen mit Keramikring, Bolzenschweißen mit Schutzgas Hub 0–6 mm, einstellbar (Raster: 0,3 mm) Schweißkabel: 2 m, 95 mm², außenliegend Steuerkabelstecker: 12-polig Abmessungen (B x H x T): 68 x 180 x 295 mm Gewicht (ohne Kabel): 2,45 kg Bsdpfoy Tqwyjx Afrewn Die neue Hubzündungs-Bolzenschweißpistole GD 22 ist für das Schweißen von Schubdübeln mit großen Durchmessern (19 und 22 mm) entwickelt worden. Der großzügig dimensionierte, einstellbare Hub (Verstellbereich: 0–6 mm) sorgt in Kombination mit dem einstellbaren hydraulischen Kolbendämpfer für optimale Schweißergebnisse in diesem Durchmesserbereich. Natürlich sind die neuen Pistolen auch für das Durchdeckschweißen geeignet. Weiterhin verfügt die Pistole über einen Kolben mit Linear-Kugellaufbahn, ein automatisches Längenausgleichssystem für unterschiedliche Bolzenlängen und Oberflächen sowie ein robustes, schlagfestes Gehäuse für den harten Baustelleneinsatz. Das hochwertige, außenliegende Schweißkabel (Querschnitt 95 mm²) ermöglicht die hohen Schweißströme, die für große Bolzendurchmesser erforderlich sind. Optional können die neuen Pistolen mit einem integrierten Wegmesssystem ausgestattet werden. Damit wird die Hubverstellung noch einfacher. Zudem ermöglicht es eine Qualitätsüberwachung durch Messen und Protokollieren des Bolzenüberstandes vor dem Schweißen sowie der Bolzenbewegung (Hub, Eintauchtiefe, Eintauchgeschwindigkeit und Kurzschlusszeit) während des Schweißens. Preis: 9.900 Euro + MwSt., verhandelbar, FCA Oradea, Rumänien Bitte unterbreiten Sie Ihr Angebot. Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir s

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: omejena funkcionalnost, moč: 150 kW (203,94 KM), nazivna toplotna moč: 250 kW (339,91 KM), ogrevalna zmogljivost: 220 kW (299,12 KM), Stacionarna lesna uplinjevalna naprava podjetja Urbas. Naprava je delujoča. Obseg vključuje motor in generator. Motor potrebuje servis. Prav tako je vključen še veljaven EEG pogodbeni dogovor o oddaji elektrike v omrežje s 21,6 centa/kWh do leta 2028. Obsežna zaloga rezervnih delov, kot so stranski kanalni puhalniki, senzorji in črpalke, je vključena. Druga naprava je priložena kot donor rezervnih delov. Bsdpfx Afsyyzv Terjwn

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, PUR-aparat za taljenje za aluminijaste vrečke / kartuše, s cevjo in polnilno glavo za uporabo na stroju za lepljenje robov Teža cca 73 kg Zmogljivost taljenja do 2 kg Z zobniško črpalko Bjdpfoy S Rw Rox Afrown Vsa ogrevanja posebej nastavljiva Z elektronskim vmesnikom za zaznavanje nivoja lepila v lepilnem delu stroja za lepljenje robov (senzor nivoja „Tippkemper“ za podajanje lepila, separacijsko vgrajen v stroj) Priključna moč: 400 V, 50 Hz, 3F, N Naprava povsem očiščena s čistilom PUR

Stanje: pripravljen za uporabo (rabljen), skupna dolžina: 5.000 mm, širina folije: 550 mm, višina izdelka (maks.): 150 mm, največja širina izdelka: 400 mm, dolžina izdelka (min.): 80 mm, Oprema: dokumentacija / priročnik, Shrink Film Packaging Line Manufacturer: Hugo Beck Model: Flexo 500 S Horizontal film wrapping machine with side sealing for tubular bag film, consisting of a wrapping machine followed by a shrink tunnel. The Flexo 500 intermittent flow wrapper stands out for its maximum variability and flexibility. Whether you need to package frozen pizzas, biscuit boxes, fruit and vegetables, books, skis, laminate flooring, or various household goods, this machine has you fully equipped for any application – ideal for daily changing orders. - Hugo Beck Flexo 500 S wrapping machine, year of manufacture: 2003 Workpiece dimensions: Width: approx. 55 - 400 mm Height: approx. 2 - 200 mm Length: from min. approx. 80 mm to theoretically unlimited Consumable/Foil: Centre-folded film, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate: approx. 20 m/min Rated voltage: 400/230 V, 50 Hz, 3-phase Rated current: 5 A Connected load: 3 kW Machine dimensions: approx. 2500 x 1500 mm (LxW) Weight: approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture: 2002 Working width: approx. 600 mm Passage height: approx. 300 mm Continuously adjustable feed Chain rod conveyor, silicone-coated transport rods Temperature control via electronic thermostat, separately adjustable top and bottom heat Heating capacity: approx. 4 - 12 kW Rated voltage: 230/400 V, 50 Hz, 3-phase Bedpjyw H Rksfx Afrewn Rated current: 19 A Connected load: approx. 12 kW Machine dimensions: approx. 2500 x 1100 mm (LxW) Weight: approx. 400 kg

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0401-230047, The FICEP Tipo G31 sheet metal processing center is designed for the efficient machining of steel sheets and flat steel in steel construction and steel trading applications. The Ficep Tipo G31 LG is capable of drilling, center punching, thread cutting, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting flat steel or sheet metal panels in a single system, with a maximum sheet width of 3,100 mm and a maximum sheet length of 14,000 mm. This CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. The system is suitable for sheet sizes as follows: sheet width minimum 200 mm, maximum 3,100 mm; sheet length minimum 2,500 mm and maximum 14,000 mm. For plasma cutting, a powerful and modern Hypertherm HPR 400 XD plasma source is provided. Additionally, the system is equipped with an oxy-fuel cutting unit for processing thick material gauges. The drilling unit, featuring high torque and spindle speeds up to 6,000 rpm, is designed for use with carbide tools such as solid carbide drills, Nenok Multiplex indexable insert tools, and also for applications with HSS coolant channel drills for drilling diameters from 10 mm to 40 mm. Bedpfx Aerr Sqljfrswn The Ficep Tipo G31 system is in excellent condition and has very few operating hours.

Leto izdelave: 2019, obratovalne ure: 3.061 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, EVT GIGANT Vapor Degreasing Unit – for Large, Heavy, and Voluminous Components The unit offered is ideal for reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to its generously sized work basket, high throughput rates are possible. Since this version is designed without flooding the work chamber, the amount of solvent required remains relatively low despite the large chamber size – a key advantage in terms of cost-effectiveness and operational expenses. Bodpfoy Tnyrex Afrewn The freely programmable PLC control enables precise adaptation to a wide range of cleaning and degreasing tasks as well as individual production requirements. Maximum system availability is ensured by the jointly-developed online remote maintenance with SIEMENS and an efficient online support service. The used machine is in excellent technical condition and can be inspected and tested at our Technology Center in D-75447 Sternenfels by prior arrangement. Technical highlights: - Closed system with no exhaust air - Top loading - Spray device & vapor degreasing - Hot air drying - Vacuum distillation - Activated carbon module (designed for 2-shift operation) - Control: Siemens S7 Profinet - Online access for remote maintenance System equipment: - Usable solvents: Perchloroethylene (PER) - Basket dimensions (L/W/H): 2100x400x600 mm - Throughput: max. 2-3 loads/h (max. 600 kg/h) - Fill volume: 400 dm³ - Energy consumption: 28 kWh - Connected load: 56 kW - Compressed air: 6 bar - Loading height: 1500 mm - Machine dimensions (L/W/H): 4200 / 1750 / 2100 mm - Machine weight: 3500 kg