Holzkraft Odstranjevanje Odvečne Barve nakup rabljenega (3.155)

Stanje: novo, Leto izdelave: 2026, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence Njdpfxsd Hx Hms Altswi With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, 4-knife cutter block for optimal planing results Smooth operation thanks to precision unit and robust cast iron construction Front steel infeed roller with helical serration for optimal feed Satin-finished steel outfeed roller, optionally with rubber roller in outfeed Work table mounted on four large columns for maximum stability under all working conditions Thickness table adjustment via handwheel with numeric height indicator (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator side High-power industrial motor Stable welded steel and grey cast iron construction Equipment Details: Work Table Mounted on four oversized spindles for maximum stability in all working conditions Special lifting device ensures table position remains secure even without locking Tersa Cutter Block No more adjustment or bolting required Knife change in seconds Self-locking Exceptionally quiet Thickness Table Adjustment on S 41 elite s Via handwheel with numeric indicator, precise to 0.1 mm Dimensions and Weights Length: approx. 900 mm Width/Depth: approx. 1070 mm Weight: approx. 361 kg Dust Extraction Connection Extraction port diameter (thicknessing): 120 mm Drive Power Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Space requirement explanation: Dimensions include maximum movement paths or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Working area explanation: Please add these dimensions to the space requirement to determine the recommended clear installation area for the machine. Thicknessing Table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Work height min.: 3 mm Work height max.: 240 mm Min. work length: 180 mm Max. material removal: 5 mm Electrical Data Supply voltage: 400 V Njdpjd Hx Hnsfx Altswi Cutter Block Type: TERSA Diameter: 95 mm Number of knives: 4 pcs. Speed: 5000 rpm Max. planing width: 410 mm Feed Speed: 6/12 m/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Nwsdpfx Aledqzh Rstsi Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and format sliding carriage made from anodised aluminium Article number: 5504932 Brand: Holzkraft Solid worktable made from heavily ribbed grey cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precision format sliding carriage made from anodised aluminium – smooth running on high-quality ball contact system Carbide guide rails – for long-term precision and minimum maintenance Tilting grey cast iron saw unit with double segment guide – accurate zero-point tilt for highest cutting precision Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding carriage – for fast and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality squaring frame – with robust telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading, and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and weights Weight (net) approx. 670kg Extraction connection Extraction port diameter: 120mm Extraction port diameter (saw blade guard): 80mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Scoring motor power: 0.65kW Output power (main motor): 7.0kW Rated operating mode main drive: S6 Duty cycle main drive: 40% Sliding carriage and table Format sliding carriage length: 3200mm Format sliding carriage width: 360mm Format sliding carriage height: 175mm Nwedpjxw N Sbofx Altei Table length: 1000mm Table width: 560mm Table height: 900mm Saw unit Cutting width with rip fence: 900mm Max. crosscut length left of saw blade: 3200mm Squaring length: 3200mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136mm Max. cutting height at 45°: 97mm Note max. cutting height: independent of scorer Saw blade diameter: 400mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000rpm Scoring unit Scoring blade diameter: 120mm Scoring blade speed: 9200rpm Equipment Scoring unit: with separate scorer motor Anodised aluminium format sliding carriage Sliding carriage handle Squaring frame Material roller on squaring frame Rip fence: with round bar guide Stops: Two professional folding stops Squaring shoe Eccentric clamp Table extension Table enlargement Saw blade pendulum guard Height adjustment and tilting of the saw unit: manual Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 Holzkraft For wood dust and chips, designed for commercial use Item number: 5131620 Brand: Holzkraft Chip Collection Capacity: 2 x 165 l Connection diameter (extraction inlet) outside: 160 mm Length approx.: 1755 mm Nwjdpjhkzttofx Altsi Width/Depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical Data Connection Voltage: 400 V Network Frequency: 50 Hz Filter Filter Surface Area: 9.21 m² Noise Emission Max. Sound Pressure Level: 73 dB(A) Airflow Rate Nominal Airflow: 1448 m³/h Dust class: H3 Scope of delivery: - Metal fan wheel - Inspection opening for cleaning the bypass filter - 5 m connection cable with 5-pin CEE plug and phase inverter - Two fixed and two swivel castors with brake - Manual filter cleaning Item no. 5131620 Location: In stock, 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2026, Holzkraft panel saw with scoring unit Compact panel saw with tiltable saw blade and high-quality sliding carriage made of anodised aluminium Cutting area of the compact panel saw directly on the rolling table Precision-guided format sliding carriage made of aluminium, anodised as standard Large-area table extension mounted on a telescopic arm, can be shifted longitudinally Standard table extension and table enlargement enable easy handling of larger workpieces Large-dimension cast iron saw assembly, double-mounted to the cast table, ensures maximum stability, precision, smooth operation, and long service life Large work table made of ground cast iron, making it extremely robust and resistant Smooth operation and precise cuts Aluminium sliding carriage With a proven ball contact system deployed millions of times Dust- and dirt-resistant due to minimal contact points between ball and trapezoidal rail 10-year HOLZKRAFT warranty on wear of the hardened guideways Telescopic fence Extendable aluminium telescopic fence Angle-adjustable With two professional folding stops Ek2a0i2ik Rip fence Supplied with fine adjustment and quick release as standard Nodpfx Aeih Dwvoltswi Scope of delivery: Table extension Table enlargement Anodised aluminium panel sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Crosscut length: 1660 mm Max. cutting height at 90° with scorer: 100 mm Max. cutting height at 45° with scorer: 79 mm Max. crosscut width left of saw blade: 1270 mm Cutting width with rip fence: 900 mm Saw blade tilt: 90° - 45° Max. saw blade diameter with scorer: 315 mm Max. saw blade diameter without scorer: 315 mm Scoring blade diameter (option): 80 mm Main saw blade speed: 4000 rpm Scoring blade speed: 7600 rpm Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Extraction outlet diameter: 120 mm Extraction outlet diameter saw guard: 60 mm Weight: 295 kg Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces High-precision sliding table made of anodized aluminum, various lengths available Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops Nedpfx Aoih Dxlsltewi Max. saw blade diameter 315 mm, tiltable from 90° to -45° Large spindle moulder swivel range from 90° to -45° to the rear Four spindle speeds up to 10,000 rpm, manually adjustable With spindle moulder reverse operation Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness Two-speed feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch and motor protection switch Fixed handwheels Dimensions and weights Weight (net) approx. 857 kg Surface planer Surface table width: 410 mm Surface table length: 2000 mm Max. planing depth, surface: 5 mm Extraction connection Extraction port diameter: 3 x 120 mm Saw blade guard extraction port diameter: 60 mm Installation information Space requirement length: 5960 mm Space requirement width/depth: 5140 mm Space requirement explanation: Dimensions consider maximum travel or working length. Working area length: 1600 mm Working area width/depth: 1600 mm Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine. Thickness planer Thickness table length: 757 mm Thickness table width: 423 mm Working thickness min.: 3 mm Working thickness max.: 230 mm Max. planing depth, thickness: 5 mm Electrical data Connection voltage: 400 V Line frequency: 50 Hz Rated operation mode drive motor: S6 Duty cycle drive motor: 40% Power output drive motor: 3 x 5.0 kW Sliding table and worktable Sliding table length: 2660 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 1250 mm Worktable width: 430 mm Worktable height: 900 mm Spindle moulder Spindle tilt: 0 to -45° Spindle shaft diameter: 30 mm Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Max. milling tool diameter: Max. tool diameter, retractable: 210 mm Max. tool diameter, retractable at 45°: 150 mm Max. tool diameter, tenoning: 275 mm Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Panel saw unit Rip length: 2600 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 71 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explanation: with scoring blade (Main) saw blade speed: 4000 rpm Feed Feed speed: 6–12 m/min Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Nwsded Hx Hpjpfx Altei Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination Machine 4-in-1 HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of saw blade: 2,310 mm Rip capacity at parallel fence: 820 mm Saw blade tilt: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./Max. working height: 3 / 230 mm Max. chip removal: 4 mm Nsdsci Tvhepfx Altjwi Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. cutter diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Nwedpfxjcnw U Ds Altji Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, Feed unit with consistent feed speed without power loss Metal gearbox with hardened gears Metal cover for the feed rollers Forward and reverse operation High-performance motor Durable polyurethane feed rollers Stand included as standard with extended outreach arm Nsdpfx Alecnxmzstowi Individually swiveling and adjustable for horizontal and vertical use With counter Model: VSA 48 L Article No.: 5115500 Technical Data: Maximum outreach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Roller travel: 25 mm Number of speed settings: 8 Feed speeds: 2/ 4/ 5.5/ 6.7/ 11/ 13/ 16.5/ 33 m/min Motor output: 0.75 kW Connection: 400 V / 50 Hz Weight: 65 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Kombinirana reškalna in žagalna strojnica SCM minimax fs 41e Letnik proizvodnje 2019 Moč pogonskega motorja 5 kW Priključna napetost 400 V Nedpozi Nhmsfx Altswi Frekvenca omrežja 50 Hz Valj reškalnih nožev, tip TERSA – 4 reškalni noži Število vrtljajev 5200 min⁻¹ Širina reškaljenja največ 410 mm Hitrost podajanja 6 / 12 m/min Priključek za odsesavanje, premer 120 mm Reškaljenje Podajalna miza, dolžina 1034 mm Odstranitev materiala, največ 5 mm Dimenzije in teža, dolžina približno 2000 mm Širina/globina približno 1110 mm Višina približno 1115 mm Teža približno 430 kg Sistem reškalnih nožev TERSA omogoča izjemno tih delovanje. Poševno nazobčen jekleni valj za enakomeren in stalen vnos materiala Podajanje materiala z dvema hitrostmi Digitalni prikazovalnik za višino žagalne mize Žagalne mize dolžine 2000 mm omogočajo enostavno obdelavo velikih obdelovancev. Delovne mize so izdelane iz sivega litega železa, žarjene in brez napetosti, zato so odporne in trajno ravne. Stabilna, velika aluminijasta vodilna plošča z okroglimi vodili (1200 x 160 mm) Nastavitev žagalne mize prek ročnega kolesa z digitalnim prikazovalnikom za višino žaganja Visoka teža stroja zagotavlja največjo natančnost in stabilno delovanje Močan industrijski motor Robustna jeklena/litina konstrukcija

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: AB00017920, Funkcionalnost: popolnoma funkcionalen, moč: 7 kW (9,52 KM), vhodna napetost: 400 V, premer vretena: 30 mm, vrtilni razpon: 45 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, širina mize: 810 mm, dolžina mize: 2.500 mm, skupna masa: 510 kg, vrsta nastavitve višine: mehanski, dolžina vretena za rezkanje: 180 mm, pomik vretena: 90 mm, delovna višina: 923 mm, Oprema: motorna zavora, - Sturdy steel and grey cast iron construction Njdpfx Alswwkqhetswi - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high dead weight - Standard features include right/left rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed change is simple and convenient from the machine side - Standard MK 4 interchangeable spindle system - Large grey cast iron worktable for lasting precision - Easy handling thanks to control elements and speed display on the front of the machine - Large-dimensioned milling fence with fine adjustment and aluminium fence jaws as standard - Fence adjustment via hand crank - Numeric display of set spindle height, accurate to one tenth of a millimeter - High-performance industrial motors

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AB00021322, skupna širina: 1.820 mm, skupna višina: 1.960 mm, skupna dolžina: 1.650 mm, delovna širina: 1.100 mm, skupna masa: 1.160 kg, moč: 11 kW (14,96 KM), dolžina brusnega traku: 1.900 mm, višina obdelovanca (maks.): 170 mm, širina brusilnega traku: 1.115 mm, vhodna napetost: 400 V, - The calibration and fine sanding machine LIBRA 35 is an extremely versatile and multi-purpose machine. - Robust, tube-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. - Operator-friendly thanks to a clearly arranged control panel on the front side. - Motorized table height adjustment. Nwedewwkuyspfx Altji - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start for the main motor. - Natural rubber feed belt with negative profile. - Support table with two rollers at the infeed and outfeed of the feed belt. - Feed belt drive by gear motor with two speeds. - Flexible steel pressure rail in front of the first unit. - Rubber pressure rollers in front of and behind each working unit. - Pneumatic belt tensioning for each unit, with decimal adjustment option for grit/belt thickness.

Stanje: delavnici obnovljeno (rabljeno), Motor 5 kW Električna nastavitev višine z digitalnim prikazom Električna sprostitev zavore za menjavo nožev Nwsdey Hkzfjpfx Altji Tersa rezalna os 520 mm Ročna pospeševalna hitrost 5-8-12-18 m/min Sprednje in zadnje stikalo za vklop in izklop Dolžina ravnalne mize 2250 x 540 mm Ročno nastavljiva prislon z možnostjo nagiba Premičen pokrov rezalne osi

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 2433345525, Funkcionalnost: popolnoma funkcionalen, Extraction nozzle 125 mm Nominal volume flow 884 m³/h Motor power 2.2 kW 16A Nsdpfeiw D U Nsx Altswi Mobile Weight approx. 194 kg Dimensions (LxWxH): 1000 x 840 x 1650 mm Container size 730 x 660 mm Manual shaker

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2023 Approximate length: 2300 mm Approximate width/depth: 1100 mm Approximate weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Planer fence swivel range: 90 - 45° Extraction port diameter (thicknessing): 120 mm Main motor: 7 kW Required length (installation space): 2300 mm Required width/depth (installation space): 1610 mm Note on required space: The dimensions account for maximum travel paths or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Note on working area: Please add the specified dimensions to the installation space to calculate the recommended free area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed speed: 5/8/12/18 m/min Nedpfsxtgz Esx Altewi Availability: short-term Location: Solingen

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Cutting plane directly at the saw blade Large-dimensioned saw unit made from cast iron, double-mounted on the cast iron table – guarantee for stability, precision, smooth operation, and long lifespan; 6-year Holzkraft warranty on wear of tilt segments Precision-guided format sliding carriage made of anodized aluminum as standard 10-year HOLZKRAFT warranty on wear of the sliding carriage guide rails Parallel fence with round bar guide and fine adjustment as standard Large worktable made of milled cast iron Smooth running and precise cuts Standard table extension and table widening allow for easy handling of larger workpieces Extendable aluminum telescopic fence with angle adjustment and two professional flip stops Made in Italy Motor: 4.0 kW - 400 V Saw blade tilting: 90 - 45° Sliding carriage length: 1600 mm Table length: 1020 mm Table width: 325 mm Cutting width with parallel fence: 700 mm Max. cutting height at 90° = 100 mm Max. cutting height at 45° = 79 mm Saw blade diameter: 315 mm Saw blade speed: 315 mm Max. cross-cut width to the left of the saw blade: 1660 mm Scoring blade diameter: 80 mm Scoring blade speed: 7600 rpm Nwjdpfewb Eh Nox Altji Weight: approx. 276 kg Note: Parallel fence and right-side table extension not shown in the images Availability: short-term Stock location: Flörsheim

Stanje: novo, Premična odsesovalna naprava Razstavni eksponat Dimenzije in teže Dolžina (izdelek) pribl. 1000 mm Širina/globina (izdelek) pribl. 500 mm Višina (izdelek) pribl. 2100 mm Teža (neto) pribl. 39 kg Prostornina zbiralnika ostružkov 110 l Nazivni zunanji premer odsesovalnega nastavka – vhod 203 mm Nazivni zunanji premer odsesovalnega nastavka – izhod 1 x 100, 1 x 120 mm Električni podatki Št. vrtljajev v prostem teku 2950 min¯¹ Priključna napetost 230 V Omrežna frekvenca 50 Hz Priključna moč 1,5 kW Izhodna moč 1,05 kW Filter Filtrirna površina 1,92 m² Nedow I Uu Rspfx Altowi Emisija hrupa Najvišja raven zvočnega tlaka 85,7 dB(A) Volumski pretok zraka Nazivni volumski pretok 1900 m³/h Največji podtlak 1700 Pa Obseg dobave: fini filtrirni vreča, vreča za ostružke Razpoložljivost: takoj Lokacija skladišča: Hochheim

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum configuration for professionals, available with Tersa or spiral cutterhead Fitted with TERSA cutterhead for lightning-fast planer blade changes TERSA planer blade system ensures exceptionally quiet operation Helically-geared steel infeed roller for constant and uniform material feed Material feed with two speeds via independent motor Extra-long jointer tables for easy and precise surfacing of workpieces Work tables made from cast iron, stress-relieved and annealed—making them highly durable, distortion-free, and perfectly flat Simultaneously opening, rear-folding jointer tables for minimal setup times Thicknessing table adjustment via handwheel with digital readout for planing height Heavy machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Planing depth from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical infeed roller (ideal for economical planing of hardwoods) Quality – Made in Europe Equipment features: Tersa planer cutterhead No knife adjustment or screwing needed Blade changes in seconds Self-locking Exceptionally quiet operation Material infeed Helically-geared steel infeed rollers for consistent and uniform wood infeed without indentations Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Fixed extraction hood With the fixed extraction hood, there is no need to reconnect extraction hoses when changing setups Saves valuable work time Simultaneous opening of jointer tables Simultaneous, spring-assisted lifting of jointer tables for quick and convenient conversion to thickness planing in seconds Thickness table adjustment FS 41 elite s with thickness table adjustment via handwheel with integrated display The thickness table is mounted on four large-diameter spindles, ensuring maximum stability under any working condition Special lifting mechanism maintains table position perfectly even without locking Kickback protection Massive anti-kickback devices prevent workpiece kickback 4-knife cutterhead ensures optimum planing results Anodized aluminum jointer fence Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° via scale Comes with auxiliary fence for safe planing of narrow workpieces Digital version With electrically controlled thickness table height adjustment and digital readout Scope of delivery: Jointer fence with round bar guide 2 feed speeds Tersa cutterhead Technical Data Total jointer table length: 2200 mm Jointer infeed table length: [please specify] Jointer table height: [please specify] Jointer working width: 410 mm Jointer maximum planing depth: 5 mm Nsdpfx Aow Rhkqeltowi Jointer fence dimensions: 1200 x 150 mm Jointer fence tilt range: [please specify] Thickness table dimensions: 775 x 410 mm Thicknessing min. workpiece height: 3 mm Thicknessing max. workpiece height: 240 mm Thicknessing min. workpiece length: [please specify] Thicknessing feed speeds: 6 / 12 m/min Cutterhead speed: 5000 rpm Cutterhead diameter: 95 mm Number of planer knives: 4 pcs Electrical specifications: [please specify]

Stanje: rabljeno, Leto izdelave: 2024, Used machine Year of manufacture: 2022 Commissioning: 08/2024 As-new condition The heavy-duty worktable made of strongly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made from anodised aluminium featuring a proven and permanently smooth ball contact system on hardened guideways, with a 10-year warranty against guideway wear. Grey cast iron saw unit with permanently precise dual pivot guide and zero-point tilting, 6-year Holzkraft warranty against wear on the tilting segments. Equipped with a powerful three-phase motor. Saw blade tilting indicated on a scale at the unit. Large squaring frame with running roller for easier panel handling. Njdpfxexua N Se Altewi Angle-adjustable aluminium telescopic fence with two professional flip stops. Fold-away parallel fence with quick-release and fine adjustment. Standard equipment includes table extension, table widening, and eccentric clamp. Made in Italy. Sliding Table and Table Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Table length: 840 mm Table width: 560 mm Table height: 900 mm Panel Saw Unit Cutting width with parallel fence: 900 mm Max. cross-cut width left of the saw blade: 3200 mm Squaring length: 2660 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 100 mm Max. cutting height at 45°: 70 mm Max. cutting height explanation: independent of scorer blade Saw blade diameter: 315 mm Saw blade diameter explanation: independent of scorer blade Saw blade speed: 3800 rpm Motor 5.5 kW The hose shown in the picture is not included in the scope of delivery! Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2022, Nova naprava Letnik izdelave: 2022 Velika radialna krožna žaga za krajšanje in obrezovanje desk Hitro preklapljanje med dvojnimi poševnimi rezi ali krajšanjem Robustno nihajno roko iz litega železa z zamenljivimi šesterokotnimi vodili Žagin agregat nagljiv na obe strani do 45° Višina reza 90° max 640x20/610x60 mm Višina reza 45° max 380 x 100 mm Višina reza -45° max 330 x 100 mm Globina reza pri motorju 0°/45° 100/50 mm Premer žaginega lista/luknja 350/30 mm Hitrost žaginega lista 2800 min-1 Miza (D x Š): 1675x1060 mm Njdpfx Aow I Utyoltewi Motor 3 kW/400 V Teža 220 kg Razpoložljivost: kratkoročno Lokacija zaloge: Hochheim

Stanje: novo, Leto izdelave: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION - Grinding unit tiltable via hand crank - Machine base made of welded steel ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate geared motor for improved sanding results - Oscillation can be optionally enabled - Graphite-coated sanding shoe for extended belt life - Height-adjustable sanding table to utilize the full width of the sanding belt - Auxiliary table for sanding radii with integrated extraction ports - Drum sanding attachment with removable work table - Spring-loaded belt tension automatically compensates for belt length variations - Equipped with adjustable stops—ideal for veneer sanding - Veneer protrusion can be sanded down effortlessly TECHNICAL DATA Dimensions and Weights - Length (product): approx. 1700 mm - Width/Depth (product): approx. 1000 mm - Height (product): approx. 1150 mm - Weight (net): approx. 300 kg Drive power - Oscillation motor power: 0.11 kW Extraction connection - Extraction port diameter: 2 x 100 mm Nsdpfx Aljw I Uvzjtewi Work table(s) - Work table length: 950 mm - Work table width: 450 mm - Work table height adjustment: 110 mm Electrical data - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit tilting range: 0 – 45° SCOPE OF DELIVERY - 1x sanding belt K100 - 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm - 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm - Service tools - Mitre fence Location: Hochheim Availability: Immediate

Stanje: novo, Feed Unit VSA 2048 L by Holzkraft - Exhibition machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed settings: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum reach: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and Weights: - Length (product) approx.: 1665 mm - Width/Depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Net weight approx.: 73.5 kg - Weight explanation (net) approx.: including stand Electrical Data: - Drive motor power: 0.75 kW - Connecting voltage: 400 V Nodpfowfhg Nox Altowi - Mains frequency: 50 Hz - new exhibition machine -

Stanje: novo, Bandsaw HOLZKRAFT HBS 433 - Demonstration machine - Upper saw blade guide, Lower saw blade guide, Nwjdpou R S Aksfx Altji Quick-release tensioning device via eccentric lever ----- Technical Data ----- Wheel diameter: 430 mm, Max. cutting height: 270 mm, Max. cutting width with fence: 370 mm, Max. cutting width without fence: 410 mm, Max. blade length: 3,345 mm, Table size: 610 x 431 mm, Table tilt: -10 to +45 °, Motor 400 V: 1.5 kW, Extraction port diameter: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 bandsaw blades (6 / 16 / 25 mm) - new demonstration machine -