Hidr. Zajemalka Za Hlode nakup rabljenega (84.842)

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. Fgedpfx Aoyizxrjplob – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: rabljeno, Leto izdelave: 1980, Tlak 250 t Razdalja med stebri 1125 mm Hod 250 mm Razdalja miza/bata, velik hod zgoraj, nastavitev zgoraj 800 mm Površina mize 1100 x 900 mm Fgodpfx Apoyx Il Eelsb Sila vlečne blazine v mizi 63 t Hod vlečne blazine v mizi 100 mm Površina vlečne blazine 700 x 400 mm Višina mize nad tlemi 960 mm Stranski prehod med stebri 700 mm Površina bata 1080 x 900 mm Vsebina olja 1000 l Pogonska moč 35,0 kW Teža 23,0 t Prostorske zahteve (ŠxGxV) 2,5 x 2,3 x 4,5 m Dovoljena za ročno polaganje po nemških predpisih o varnosti pri delu (UVV) s hidravličnim oljnim pogonom, možnostjo krmiljenja tlaka/časa in poti, svetlobno zaveso (Sick), hidravlično vlečno blazino v mizi, dušenjem reza Ni potrebna temeljna jama Lahko se ponudi brez vklopa ali alternativno z novo krmilno enoto Siemens S7-1500 F

Stanje: rabljeno, Leto izdelave: 1984, Pressure: 200 t Frame gap: 1800 mm Stroke: 710 mm Distance table/ram, max. stroke up, adjustment up: 1100 mm Table surface: 1600 x 1300 mm Cushion force in table: 80 t Cushion stroke in table: 250 mm Cushion area: 1400 x 1080 mm Table height above floor: 800 mm Lateral frame passage: 800 mm Ram surface: 1660 x 1300 mm Downward speed: from 400 mm/s Return speed: up to 410 mm/s Working speed: 14.3 - 49.7 mm/s Drive power: 38.0 + 13.0 kW Weight: 25.0 t Required space (WxDxH): 3.65 x 3.3 x 5.4 m Fsdpfxjyx Ilro Aplsgb Height above floor: 5.05 m Height below floor: 0.4 m Approved for manual inserting operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, pressure/time and stroke-dependent control, light barrier (Sick) front and rear, hydraulic cushion in table (controllable), hydraulic shock absorption (in side frame), mechanical depth stop (motorized adjustable), mechanical ram lock, two-hand operation Can be offered without commissioning or alternatively with new Siemens S 7-1500 F control system

Stanje: rabljeno, Leto izdelave: 2007, Tlak 315 t Razmik stebrov 1750 mm Hod 700 mm Razdalja miza/klin, največji hod zgoraj, nastavitev zgoraj 1200 mm Površina mize 1600 x 1500 mm Tlačna sila vlečnega blazine v mizi 125 t Hod vlečne blazine v mizi 200 mm Površina vlečne blazine 1200 x 1400 mm Višina mize nad tlemi 750 mm Površina klina 1640 x 1500 mm Pogonska moč 55,0 + 11,0 kW Teža 29,5 t Prostorske zahteve (ŠxDxV) 3,2 x 4,5 x 5,8 m Višina nad tlemi 5,1 m Fodovuukbspfx Aplegb Leto izdelave 1983 Leta 2007 modernizacija krmiljenja Siemens S 7 Dovoljena za ročno vlaganje skladno z normo CE z oljno hidravličnim pogonom, hidravlično vlečno blazino v mizi in hidravličnim dušenjem reza lahko se ponudi brez zagona, z zagonom v obstoječem stanju ali alternativno z novo krmilno enoto Siemens S 7-1500 F.

Stanje: rabljeno, Leto izdelave: 1989, Pressure 100 t Column width 1060 mm Stroke 700 mm Distance table/ram, large stroke at top, adjustment at top 1250 mm Table surface 1000 x 700 mm Fgedpovuk Najfx Aplob Cushion pressure in table 40 t Cushion stroke in table 200 mm Cushion area Ø 250 mm Table height above floor 950 mm Side frame passage 580 x 750 mm Ram area 1000 x 700 mm Oil capacity 700 l Drive power 47.0 kW Weight 13.0 t Space requirement (W x D x H) 2.2 x 1.8 x 5.0 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) with electrohydraulic drive, pressure/time and stroke dependent control, hydraulic cushion in table, ejector in ram, mechanical depth stop (motorized adjustment), ram locking device (SITEMA) can be offered without commissioning, or alternatively with new Siemens S7-1500 F control system

Stanje: rabljeno, Leto izdelave: 2010, Pressure 315 t Clear width between uprights 1800 mm Stroke 400 mm Distance table/ram, max. stroke up, adjustment up 650 mm Table size 1800 x 1000 mm Table height above floor 900 mm Cushion pressure in table 80 t Cushion stroke in table 100 mm Cushion surface in table 1300 x 600 mm Lateral upright passage 600 mm Ram surface 1800 x 1000 mm Fsdsvuubmjpfx Aplegb Downward speed 400 mm/s Upward speed 300 mm/s Working speed 15 - 80 mm/s Oil capacity 1700 l Drive power 55.0 kW Weight 27.5 t Space requirements (W x D x H) 3.1 x 2.2 x 4.6 m Year of construction 1980 - Modernisation 2010 Approved for manual loading operations according to German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in table No foundation pit required No foundation pit required Can be offered without commissioning (WITHOUT monitor/control panel) or alternatively with new Siemens S 7-1500 F control, with new operator console and interface.

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 100 t Frame width: 770 mm Stroke: 200 mm Distance table/ram, stroke at top: 800 mm Table surface: 770 x 900 mm Table height above floor: 850 mm Cushion pressure in table: 40 t Cushion stroke in table: 200 mm Cushion surface in table: 600 x 600 mm Lateral frame opening: 600 mm Fgedpfxsvut Ufs Apleb Ram surface: 770 x 900 mm Downward speed: 62 mm/s Upward speed: 350 mm/s Working speed: 17.5 mm/s Oil capacity: 700 l Drive power: 42.0 kW Weight: 9.0 t Space requirements (WxDxH): 2.6 x 2.0 x 3.8 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) Equipment: with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic cushion in table, shock absorption during cutting, depth stop, two-hand operation No foundation pit required Can be offered not commissioned, commissioned in current condition, or alternatively with a new Siemens S 7-1500 F control system – video of machine before disassembly available

Stanje: rabljeno, Leto izdelave: 1990, Pressure 500 t Fodpfx Apovut Tbolsgb Clearance between uprights 1220 mm Stroke 600 mm Distance table/ram, max. stroke up, adjustment up 1000 mm Table surface 1600 x 1200 mm Cushion force in table 320 t Cushion stroke in table 150 mm Cushion area in table 750 x 625 mm Cushion force in ram 180 t Cushion stroke in ram 100 mm Cushion area in ram 750 x 625 mm Ram area 1600 x 1200 mm Table height above floor 800 mm Downward speed 665 mm/s Upward speed 530 mm/s Working speed 34 - 100 mm/s Oil quantity 2000 l Drive power 180.0 kW Weight 40.0 t Required space (WxDxH) 3.2 x 2.4 x 7.5 m Foundation pit depth 4.1 m Height above floor 5.55 m Year of manufacture 1978 - Overhaul 1990 Approved for manual loading according to German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in table and ram Foundation pit depth approx. 4.1 m As is, without commissioning

Stanje: rabljeno, Leto izdelave: 1979, Pressure: 160 t Clearance between uprights: 1,620 mm Stroke: 600 mm Distance table/ram, stroke up: 800 mm Table area: 1,600 x 1,100 mm Table height above floor: 750 mm Blankholder force in table: 63 t Blankholder stroke in table: 180 mm Blankholder area in table: 1,300 x 750 mm Lateral upright passage: 600 mm Fedpfx Apovut Ryjljgb Ram area: 1,600 x 1,100 mm Oil capacity: 1,160 l Drive power: 30.0 + 16.0 kW Weight: 23.6 t Space requirements (LxWxH): 2.9 x 2.3 x 4.65 m Height above floor: 4.26 m Approved for manual feeding in accordance with German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic blankholder in the table No foundation pit required Can be offered 'as-is', in operational condition, or alternatively equipped with a new Siemens S7-1500 F control system Video from seller before dismantling is available

Stanje: novo, Dolžina upogibanja: 4100 Debelina pločevine: 25 Premer zgornjega valja: 460 Motor: 22 Dimenzije (D x Š x V): 7200 x 2500 x 2200 mm Teža pribl.: 31000 Dolžina pločevine: 4100 Tehnični podatki: - Kaljeni in polirani valji - Celotno ohišje iz jekla ST-52 - Konusna naprava za upogibanje - Digitalni prikaz za stranske valje - Prenosna kontrolna plošča - Valji so vgrajeni z ležaji - Zgornja zaščita valjev, hidravlično odpiranje in zapiranje preko upravljalne plošče. - Vsi valji poganjani s hidravličnim motorjem in planetnimi zobniki - Stranske premike poganja hidravlika - Primeren za CE-standard Opcije: - spremenljiva rotacijska hitrost EURO 5.858, -- - Miza za dovod materiala na zahtevo - Oljni hladilnik STD - Sredinska podpora EURO 18.750, -- - Stranske opore EURO 15.400, -- Fodpfxjd Ab Sps Aplegb Imamo veliko referenc!

Stanje: novo, Dolžina pločevine: 2100 Debelina pločevine: 40 Ukrivljanje: 30 Premer zgornjega valja: 390 Stranski valj: 360 Motor: 22 Dimenzije (DxŠxV): 4900 x 1950 x 2200 Teža približno: 17000 Tehnični podatki: - Kaljeni in polirani valji - Celotno telo iz jekla ST-52 - Konusna upogibna naprava - Digitalni prikaz za stranske valje - Prenosna kontrolna konzola - Valji so montirani z ležaji - Pokrov zgornjih valjev, hidravlično odpiranje in zapiranje preko upravljalne plošče - Vse valje poganja hidravlični motor in planetno gonilo - Stranski premiki so izvedeni hidravlično Opcije: - spremenljiva hitrost rotacije EURO 4.682,-- - Miza za dovajanje materiala na zahtevo - Hladilnik olja EURO 1.040,-- Fgodpfxod Ab Syj Aplsb - Podpora v centru EURO 13.600,-- - Stranske podpore EURO 9.250,-- Imamo veliko referenc!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, številka stroja/vozila: M170-382, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, število valjev: 3, premer zgornjega valja: 170 mm, dolžina valja: 1.600 mm, delovna širina: 1.600 mm, najv. debelina pločevine: 8 mm, najv. debelina jeklene pločevine: 8 mm, skupna masa: 2.310 kg, skupna dolžina: 3.500 mm, skupna širina: 1.100 mm, skupna višina: 1.130 mm, moč: 55 kW (74,78 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nožno daljinsko upravljanje, nujno zaustavitev, zavrtljivi zgornji valj, Ponujamo to hidravlično valjčno stiskalnico za pločevino Knuth KRM ST-15/6.0, v novem stanju, letnik 2023. Stroj je bil naročen za stranko, ki si je premislila, zato ga moramo prodati po promocijski ceni. Trenutno je stroj na sedežu podjetja Knuth v Wasbeku v Nemčiji in še ni bil uporabljen. Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Fgedeyyd S Rspfx Apleb

Stanje: rabljeno, Leto izdelave: 1982, Funkcionalnost: nepreverjeno, Delovna velikost cca 3500 x 2400 mm 3 navpični cilindri 3 vodoravni cilindri Fsdpfxjyyb Aaj Aplogb

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: 9108, Ponudba 26001 Tehnični podatki: - horizontalni + vertikalni delovni položaj - 3 motorizirani pogonski valji - hidravlično nastavljanje levega spodnjega valja - pritisk hidravličnega cilindra: 4 t - premer osi: 35 mm - hitrost vrtenja osi: 11 o/min - premer valjev: 132 - 142 mm Fodpfx Asy Dqn Tsplegb - pogon: 400 V, 1,1 kW - zmogljivost upogibanja cca: - okrova cev Ø 800: 60 x 1,5 mm - ploščato železo Ø 400: 90 x 15 mm - kvadratno železo Ø 400: 30 mm - oprema: - ločena upravljalna konzola z digitalnim prikazom - električno nožno stikalo v ločenem upravljalnem pultu za desno/levo vrtenje - standardni komplet za upogibanje ploščatega in kotnega materiala - 6 kompletov valjev za cevi: 22, 28, 33, 42, 48 in 60 mm - teža cca: 450 kg - potrebni prostor cca: Š 700 x V 1150 x G 950 mm

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7926 Fsdpfx Apjyu Tp Teljgb TEHNIČNI PODATKI - delovna dolžina: 6200 mm - delovna širina: 150 mm - delovna višina: 1350 mm - 12 vertikalnih hidravličnih cilindrov - mere d/š/v: 6580/1270/2350 mm - teža približno 4000 kg PREDNOSTI – zelo dobro stanje – rabljena preša – ni prebarvana – namenjena profesionalni uporabi Neto cena: 69.900 PLN Neto cena: 16.650 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (v primeru večjih valutnih nihanj se lahko cena spremeni)

Stanje: rabljeno, Leto izdelave: 2005, Tlak 800 t Fgsdjvuuikopfx Aplob Oddaljenost med stebri 2560 mm Hod 1050 mm Razdalja miza/bata, zgoraj 1870 mm Površina mize 2500 x 1730 mm Vlečni blazinasti tlak v mizi 300 t Hod vlečnega blazine v mizi 395 mm Površina vlečne blazine v mizi 2300 x 1300 mm Površina bata 2500 x 1730 mm Vlečni blazinasti tlak v batu 63 t Hod vlečnega blazine v batu 150 mm Stranski prehod med stebri 1000 mm Prostornina olja 4300 l Pogonska moč 200,0 kW Potrebna površina (ŠxDxV) 4,1 x 2,8 x 10,0 m Višina nad tlemi 7,0 m Leto izdelave 1974 Prenova 2005: nekdanja BZE 800, s strani proizvajalca z novim batom in novim cilindrom predelana v ZE 800 z oljno-hidravličnim pogonom, hidravlično krmiljenim vlečnim blazinam v mizi in batu razstavljeno skladiščeno – video pri ponudniku pred demontažo na voljo

Stanje: rabljeno, Leto izdelave: 2001, - Leto izdelave: 2001 Specifikacije - Dolžina reza: 3100 mm Fgsdpfxexa Aclj Aplob - Kapaciteta: 16 mm - Hod: 170 mm - Število hodov: 10 /min - Rezervoar za olje: 410 l - Moč motorja: 37 kW - Obratovalna napetost: 400 V - Nazivni tok: 72 A - Nazivni tok glavne varovalke: 100 A - Dimenzije (ŠxVxG): 3750 x 2400 x 3425 mm - Teža: 13.800 kg

Stanje: dober (rabljeno), Leto izdelave: 1975, delovna širina: 3.700 mm, kot rezanja (min.): 2 °, najv. debelina jeklene pločevine: 16 mm, maks. debelina pločevine iz nerjavečega jekla: 12 mm, zadnji prislon: 1.000 mm, kapaciteta rezervoarja za olje: 500 l, skupna masa: 18.400 kg, skupna dolžina: 4.500 mm, Oprema: dokumentacija / priročnik, zaščita prstov, Naprodaj: 1 kos rabljene hidravlične škarje za pločevino Proizvajalec: Darley Tip: GS3660x16 Leto izdelave: 1975 Tehnični podatki: Razmik med stojali: 3860 mm Rezanje pod kotom: 2° Pridržala: 18 kos Prostornina olja: pribl. 500 l Skupna potrebna moč: 22 kW Masa: 18.400 kg Zadnji omejevalnik: 1.000 mm Oprema: električni zadnji omejevalnik osvetlitev rezalne črte prednja zaščita za prste kroglični valjčki na delovni mizi bočni omejevalnik Fgedoxfkr Sopfx Apleb podporne roke prostostoječe nožno stikalo navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 4315002, Ponudba 26087 Fjdpfx Apsy Aufgjlogb Tehnični podatki: - Dimenzija tračne žage: 4150 x 27 x 0,9 mm - Hitrost rezanja: brezstopenjsko nastavljiva 15 - 105 m/min - Regulacija pritiska reza: brezstopenjsko 0,2 - 2,0 m/min - Obseg reza: - pri 90° okroglo: 320 mm - pri 90° kvadratno-ploščato: 400 x 280 mm - pri 45° okroglo: 200 mm - pri 30° desno, okroglo: 170 mm - Nastavitev kota poševnega reza z digitalnim prikazom kota - Skupni pogon: 400 V / 3,0 kW - Pnevmatsko podprta minimalno količinska hladilna naprava - Hidravlična napetost tračne žage in motorizirana žagasta krtača - 2 originalni transportni valji po 2000 mm - Prostor potrebovan pribl. Š 4200 x V 1650 x G 2450 mm - Teža pribl. 1400 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 119878, Oferta 26098 Fgsdpfx Apsy At D Ijlob Datos técnicos: - Diámetro de la hoja de sierra: hasta 400 mm - Capacidad de corte a 90° hasta: - redondo: 130 mm - cuadrado: 120 mm - plano: 305 x 40 mm o bien 240 x 85 mm - Ajuste de inglete a izquierda/derecha: 0–90° - A 45°: - redondo: 130 mm - plano: 245 x 30 mm o bien 180 x 70 mm - Velocidad de avance de la hoja de sierra, regulable sin escalonamientos: 0–10 m/min - Velocidad de corte de la hoja de sierra: 13 / 26 m/min - Motor de la sierra: 400 V / 1,7 / 2,6 kW - Motor hidráulico: 400 V / 0,75 kW - Mordaza hidráulica para material con presión de apriete regulable sin escalonamientos - Volante manual para ajuste fino - Tope de retención ajustable - Dispositivo de refrigeración - Mesa de rodillos de salida con tope: 5000 mm - Mesa de rodillos de entrada: 4000 mm - Dimensiones aprox.: An 800 x Al 1770 x Pr 1020 mm - Peso aprox.: 950 kg

Stanje: dober (rabljeno), Hidravlični vpenjalni voziček tipa VS. Širina tira 790 mm. Višina vozička 390 mm. S pomožnim vozičkom HEH ali HKE. Fedpfx Ajxwn Rvjplsgb

Stanje: dober (rabljeno), Leto izdelave: 1966, številka stroja/vozila: 11473, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vhodna napetost: 400 V, stiskalna sila: 40 t, hod: 150 mm, širina mize: 270 mm, dolžina mize: 3.000 mm, višina mize: 880 mm, tabela razdalj do bata: 1.500 mm, kapaciteta rezervoarja za olje: 150 l, skupna dolžina: 1.300 mm, skupna širina: 3.250 mm, skupna višina: 2.160 mm, skupna masa: 1.500 kg, leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, Ponujamo to dobro Eitel ravnalno/hidravlično/valjasto stiskalnico. -> Leto izdelave: 1966 -> Ravnalna sila: 40 t, 4,0 kW -> Hod: 150 mm, max. 1500 mm med konicami -> Miza 270 x 3000 mm -> Drsnik z konicami in merilnimi urami premičen, konice vzmetene -> Območje ravnalnega hoda nastavljivo po gredi z ročnim kolesom, ročna ročica z ekscentričnim vodenjem -> Območje ravnalnega hoda cca. 20 mm z obračanjem ročne ročice z ekscentrom -> Možno zelo natančno ravnanje v stotinkah milimetra -> Teža: cca. 1,5 t -> Višina: cca. 2,10 m -> Originalna navodila za uporabo na voljo -> Video na zahtevo na voljo Fgjdeyzg Ttepfx Apleb Stroj je v dobrem stanju in popolnoma delujoč! Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: rabljeno, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position controller - Backgauge adjustment via ball screw spindles - SICK light curtain safety system at the front for intervention protection - 3 support arms with ball rollers for material support - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine, extremely stable construction Space requirements (main machine) L x W x H: 4650 x 2610 x 3200 mm Weight (main machine): 27,000 kg Space required for transport (main machine) L x W x H: 4650 x 2610 x 3200 mm Transport space (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, trial cuts possible. Currently, the hold-downs are being newly sealed; the corresponding price adjustment will be made in the next few days. Fgsdpfxsd Hxx Aj Apleb

Stanje: dober (rabljeno), Leto izdelave: 1990, Pressure approx. 10 t Reach adjustable mm Stroke 250 mm Table clamping surface 220 x 220 mm Max. workpiece diameter approx. Ø 267 mm Total power requirement 1.5 kW Machine weight approx. 430 kg Space requirements approx. 899 x 772 x 1520 mm Roll Marking Machine Application Area BORRIES roll marking machines are used for marking solid or hollow round parts. With appropriate fixtures and tools, flat workpieces and non-rotationally symmetrical components can also be marked. Durable high marking performance can be achieved with minimal effort. • Marking depth is easy to adjust. • High workpiece throughput possible. • Adjustment to workpiece diameter and marking depth can be made easily via the height adjustment of the machine table. • The integrated tolerance range protects workpieces and tools. • Built for durability and robustness. • Standard roll marking fixtures. • Optional special-purpose fixtures available. Fedpfx Apjul Eawslegb

Stanje: rabljeno, Leto izdelave: 1973, Pressure: 1000 t Column width: 4150 mm Fedpeyn R Elsfx Aplegb Stroke: 1200 mm Distance table/blank holder, max. upper stroke, upper adj.: 2100 mm Table area: 4000 x 2200 mm Cushion force in table: 360 t Cushion stroke in table: 300 mm Cushion force in ram: 100 t Cushion stroke in ram: 150 mm Ram area: 4000 x 2200 mm Lateral column clearance: 1300 mm Cushion in table: hydraulic, controlled Cushion in ram: hydraulic, controlled Die shock absorption: hydraulic Machine weight approx. 280 t The machine was overhauled in 1999. Follow-on press in a press line