Hesse By Lfss Dpm-K 1040-60 nakup rabljenega (59.698)

Stanje: rabljeno, Dobavni rok cca 12 - 14 tednov od naročila Država izvora: Turčija Cena: 20.000 € Maks. debelina pločevine - konstrukcijsko jeklo: 5 mm Iztek: 1200 mm Hitrost: 4,1 m/min Dolžina: 3000 mm Širina: 750 mm Višina: 1400 mm Teža: 1350 kg Min./maks. premer ronda: 250 / 2000 mm Iztek na strani noža: 300 mm Mobilna upravljalna plošča Hidravlično vpenjanje pločevine Reduktorski motor z zavoro Motoriziran sistem pozicioniranja pločevine Možni tudi notranji rezi Oprema v skladu s CE direktivami Možnosti: 1 par rezervnih nožev 1.200,00 € Robilna naprava z 1 parom valjev Hfedpfxsyq Smvs Alfeg 2.000,00 €

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control Hfodpfx Aoypbqujlfsg IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Lease rate: €305.28 Shaft diameter: 50 - 60 mm Top roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square bar (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round bar (cross-section / min. diameter): Ø 35 mm / 350 mm; Ø 10 mm Tube (cross-section / min. diameter): Ø 60x2 mm / 600 mm; Ø 15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Square tube (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron legs out (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron legs in (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN legs out (cross-section / min. diameter): UPN 80 / 600 mm; UPN 30 / ... UPN legs in (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / ... IPN flat (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the two lower rollers Hfsdpfx Ajyn R E Sslfog Hardened universal rollers Lateral straightening rollers, manually adjustable in 3 axes Usable in horizontal and vertical position Digital display for lower roller positions Machine and equipment compliant with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: New Delivery time: Approx. 12–14 weeks from order Country of origin: Turkey Price: €76,820 Leasing rate: €1,451.90 Pressing force: 160 tons Bending length: 4,050 mm Axes: Y1 / Y2 and X axis Stroke: 200 mm Distance between uprights: 3,600 mm Throat depth: 300 mm (side frame) Installation height: 430 mm Drive concept: Hydraulic Rapid traverse speed Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 140 mm/s Backgauge travel X-axis: 620 mm Backgauge speed X-axis: 250 mm/s Table height: 858 mm Table width: 104 mm Motor power: 15 kW Length: 4,850 mm Width: 1,900 mm Hfodowird Hepfx Alfeg Height: 2,610 mm Weight: 10,500 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10: - 10" 2D graphical display - Intuitive touch-screen operation (easy drawing of the bending contour by finger) - User-friendly dialogue-based programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet metal blank - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software allows programs to be written on a PC and then transferred to the machine by USB CNC-controlled backgauge with linear guides and ball screw spindles CNC-controlled crowning Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Fiessler AKAS laser safety device mounted on upper beam Sheet support arms Side and rear safety guards Equipment compliant with CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to serial production of standardized models without any compromise on quality and accuracy OPTIONAL: CNC-controlled R-axis (X adjustment range = 500 mm) DBend, 3D CAD/CAM import and simulation software (supports step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Hfodpfx Alsyb Sy Rsfeg Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €10,800 Leasing rate: €207.36 Shaft diameter: 35 mm Upper roller diameter: 137 mm Lower roller diameter: 137 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 7 m/min Flat bar vertical (cross-section / min. diameter): 35x8 mm / 300 mm Flat bar horizontal (cross-section / min. diameter): 50x12 mm / 400 mm Square steel (cross-section / min. diameter): 18x18 mm / 250 mm Round steel (cross-section / min. diameter): Ø22 mm / 200 mm Tube (cross-section / min. diameter): Ø40x1.5 mm / 500 mm Rectangular tube vertical (cross-section / min. diameter): 30x15x2.5 mm / 500 mm Square tube (cross-section / min. diameter): 25x25x2 mm / 450 mm Angle steel leg outside (cross-section / min. diameter): 35x35x5 mm / 400 mm Angle steel leg inside (cross-section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg 3 driven rollers (with brake motor) Hardened and ground shafts Hjdpfx Aljynnhkjfjfg Hydraulic adjustment of both lower rollers Usable both horizontally and vertically Standard roller set Foot pedal for forward and reverse operation Two digital displays Control panel Machine and equipment conform to CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država porekla: Turčija Cena: 31.620 € Leasing rata: 603,94 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 2 mm Maks. širina pločevine: 600 mm Maks. presek: 1200 mm² Premer podajalnih valjev: 80 mm Hitrost podajanja: 75 m/min Pospešek podajanja: 10 m/s² Motorni navor: 10 Nm Stožčasti čelni zobniški prenos WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7'' barvni zaslon na dotik SIEMENS 2 gnana valja Zunanji enkoder Hjdjynnf Nspfx Alfjfg OPCIJA: Rokov koles in Simlinx daljinski servisni modul 4.290 €

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Turčija Hjdpfx Ajynnbwjlfofg Cena: 97.800 € Leasing obrok: 1.848,42 € Pritisk: 160 t Dolžina mize: 1100 mm Širina mize: 700 mm Prebojna odprtina v mizi: 210 mm Hod: 23 - 110 mm Število hodov: 60 1/min Bat: 630 x 400 mm Vodila bata: 8 Nastavitev bata: 95 mm Luknja za čep v batu: 65 mm Izvleček: 325 mm Višina vgradnje: 480 mm Dolžina: 2400 mm Širina: 1430 mm Višina: 3200 mm Teža: 9950 kg 8-kratno vodenje bata Sprednja zaščita z varnostno svetlobno zaveso Motorska nastavitev bata Hidravlična zaščita pred preobremenitvijo Samodejno mazanje Oprema po CE predpisih Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje novo Dobavni rok približno 10 tednov od naročila Država izvora Turčija Cena 6.600 € Leasing obrok 127,38 € Največja debelina pločevine - konstrukcijsko jeklo 4 mm Izvlek 200 mm Valovna dolžina 300 nm Število orodij 4 kosi Premer valja 126 mm Hfodpjynm Ngofx Alfsg Hitrost vrtenja 10 1/min Dolžina 1475 mm Širina 550 mm Višina 1200 mm Teža 460 kg Samozaviralni reduktorski motor Nožno stikalo za vožnjo naprej/nazaj Nastavljiva spodnja valja Jekleni valji z bronastimi ležaji 4 kompleti valjev Podstavek Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Oprema v skladu s CE predpisi ALTERNATIVA: Različica HIBKS 4,0 z hidravličnim nastavljanjem zgornjega valja 9.100 €

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov od naročila Hfodpfx Aljynm Naefsg Država porekla: Turčija Cena: 5.100 € Leasing obrok: 98,43 € Največja debelina pločevine - konstrukcijsko jeklo: 2,5 mm Izsev: 160 mm Dolžina valja: 250 nm Število orodij: 4 kos Premer valja: 96 mm Število obratov: 13 1/min Dolžina: 1475 mm Širina: 550 mm Višina: 1200 mm Teža: 320 kg Samozavorni reduktorski motor Nožni pedal za naprej/nazaj Nastavljivi spodnji valj Jekleni valji z bronastimi ležaji 4 kompletov valjev Podnožje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI Oprema v skladu s CE predpisi ALTERNATIVA: HIBKS 2,5 z hidravličnim nastavljanjem zgornjega valja € 7.600,00

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hfedpfjynm Ehex Alfjg Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hfsdoynm D Rspfx Alfog Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 14 – 16 weeks from order Country of origin: Turkey Price: €252,800 Press force: 600 tons Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 3,100 mm Frame gap clearance: 410 mm Installation height: 700 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 154 mm Oil tank: 280 l Length: 5,750 mm Width: 2,500 mm Height: 4,000 mm Weight: 40,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 Axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bend contours using your finger) - User-friendly dialog programming, selectable in 2D or 3D mode Hjdsynmxnspfx Alfjfg - 2D and 3D bending process simulation - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet metal cutting - Automatic calculation of bending sequence - Graphical product and tool storage - Correction capability - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics run only during upper beam movement - Low energy consumption - Reduced noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D including PC software Profile-S with 3D file import capability

Stanje: novo, Leto izdelave: 2023, Stanje: novo Leto izdelave: 2023 Številka zaloge: 8286 Dobavni rok: takoj, možna vmesna prodaja Država porekla: Turčija Cena: 2990 € Na zalogi: 1 Dolžina upogibanja: 2040 mm Debelina pločevine (420 N/mm²): 0,8 mm Maks. kot upogiba: 70° Dolžina: 2400 mm Širina: 750 mm Hfsdpfxjynmxbj Alfsg Višina: 850 mm Teža: 290 kg Neprekinjena ravna zgornja tirnica Na kolesih Ročni rezalni aparat

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €34,200 Leasing rate: €653.22 Shaft diameter: 100 mm Roller diameter: 315 mm Number of driven rollers: 3 Motor power: 7.5 kW Speed: 7 m/min Flat bar, upright (section / min. diameter): 100x20 mm / 800 mm; 30x10 mm Flat bar, flat (section / min. diameter): 200x30 mm / 1,200 mm; 160 mm Square steel (section / min. diameter): 60x60 mm / 750 mm; 15x15 mm Round steel (section / min. diameter): Ø 75 mm / 800 mm; Ø 15 mm Tube (section / min. diameter): Ø 125x2.5 mm / 1,400 mm Rectangular tube, upright (section / min. diameter): 100x40x4 mm / 1,300 mm Square tube (section / min. diameter): 80x80x5 mm / 1,500 mm; 25 mm Angle steel, leg outwards (section / min. diameter): 100x100x12 mm / 1,000 mm Angle steel, leg inwards (section / min. diameter): 100x100x10 mm / 1,000 mm UPN, leg outwards (section / min. diameter): UPN 180 / 900 mm; UPN 30 UPN, leg inwards (section / min. diameter): UPN 180 / 1,000 mm; UPN 30 IPN, flat (section / min. diameter): IPN 180 / 1,000 mm; IPN 8 Length: 1,465 mm Width: 2,000 mm Hfedpeynmrzofx Alfjg Height: 1,700 mm Weight: 4,000 kg 3 hydraulically driven rollers Robust steel welded construction Hydraulic adjustment of both lower rollers Digital display of lower roller positions on a separate control panel Lateral guide rollers adjustable in 3 axes Usable horizontally and vertically Forward and reverse drive Machine and equipment comply with CE regulations WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €51,900 Leasing rate: €980.91 Shaft diameter: 120 mm Roller diameter: 390 mm Driven rollers: 3 Motor power: 15 kW Speed: 2 / 7.5 m/min Flat bar upright (cross-section / min. diameter): 125x25 mm / 1,200 mm; 30x Flat bar flat (cross-section / min. diameter): 200x50 mm / 1,000 mm; 100x Square bar (cross-section / min. diameter): 65x65 mm / 750 mm; 20x20 mm Round bar (cross-section / min. diameter): Ø 80 mm / 850 mm; Ø 20 mm Tube (cross-section / min. diameter): Ø 160x4 mm / 2,800 mm; Ø ... Rectangular tube upright (cross-section / min. diameter): 120x40x4 mm / 1,800 mm; 3x Square tube (cross-section / min. diameter): 90x90x5 mm / 1,800 mm; 30x Angle iron, leg outwards (cross-section / min. diameter): 120x120x12 mm / 1,200 mm; Angle iron, leg inwards (cross-section / min. diameter): 100x100x10 mm / 1,200 mm; UPN, leg outwards (cross-section / min. diameter): UPN 220 / 1,000 mm; UPN 1... UPN, leg inwards (cross-section / min. diameter): UPN 220 / 1,200 mm; UPN 1... IPN horizontal (cross-section / min. diameter): IPN 220 / 1,000 mm; IPN 8... Length: 2,000 mm Hodpfeynmruex Alfefg Width: 1,650 mm Height: 1,900 mm Weight: 4,450 kg 3 driven rollers (hydraulic motor and planetary gearbox) Shafts made of hardened and ground special steel Hydraulic adjustment of both lower rollers Hardened universal rollers Side guide rolls hydraulically adjustable in 3 axes 2 speeds Usable horizontally and vertically Mobile control panel Digital display (3 axes) Machine and equipment according to CE standards Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €145,000 Leasing rate: €2,740.50 Cutting length: 6,080 mm Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Throat depth (side frame): 350 mm Strokes per minute: 10 Cutting angle: 0.5 – 2° Number of hold-down clamps: 29 Hold-down force: 20 t Back gauge: 1,000 mm Back gauge speed: 200 mm/s Motor power: 22 kW Oil tank: 200 l Support arms: 5 pcs. Table height: 900 mm Table width: 630 mm Table length: 6,370 mm Length: 7,300 mm Width: 2,150 mm Total width with support arms and rear guard: 3,400 mm Height: 2,750 mm Weight: 25,500 kg Slider construction CNC touchscreen controller D-touch 7 for back gauge, cutting angle, blade gap, cutting length, and piece counter USB port CNC-controlled blade gap adjustment via table (patented) Oil cooler Manual central lubrication Cutting line illumination Swing-up ball screws for back gauge Balls integrated in table Swing-up finger guard, 1,000 mm Side stop with T-slots, tilting stop, and scale Hedpfx Alowiqygjfjfg 5 support arms with T-slots Pre-filled with oil Light barriers at the rear of the machine Operating instructions in GERMAN and ENGLISH PRICE FCA TURKEY (Stock photo)

Stanje: novo, Leto izdelave: 2026, Condition: New Year of manufacture: 2026 Stock number: 090180 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €8,300 Leasing rate: €160.19 In stock: 1 Shaft diameter: 50 mm Top roller diameter: 152 mm Bottom roller diameter: 162 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 4.5 m/min Flat bar, upright (cross-section / min. diameter): 60x10 mm / 600 mm; 20x10 Flat bar, flat (cross-section / min. diameter): 100x15 mm / 600 mm; 50x Square bar (cross-section / min. diameter): 35x35 mm / 600 mm; 15x15 Round bar (cross-section / min. diameter): 35 mm / 600 mm; Ø 20 mm Tube (cross-section / min. diameter): 70x2 mm / 1200 mm; Ø 25 Rectangular tube, upright (cross-section / min. diameter): 70x30x3 mm / 1500 mm; 30x Square tube (cross-section / min. diameter): 50x50x3 mm / 1600 mm; 20x Angle steel, legs outside (cross-section / min. diameter): 50x50x6 mm / 600 mm; 30x3 Angle steel, legs inside (cross-section / min. diameter): 50x50x6 mm / 900 mm; 30x3 Length: 810 mm Width: 950 mm Height: 1500 mm Weight: 500 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of top roller Hardened universal rollers Side guide rolls adjustable manually on one axis Hodpfx Alswiqm Tsfsfg Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment in accordance with CE regulations Operating instructions in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €269,588 Laser power: 3 kW Table type: Shuttle table Max. sheet thickness - Mild steel: 16 mm Max. sheet thickness - Stainless steel: 8 mm Hodpfx Alox U Elnofofg Max. sheet thickness - Aluminium: 8 mm Max. sheet thickness - Copper: 5 mm Max. sheet thickness - Brass: 8 mm Total connected load: 29.9 kW (with extraction) Cutting area: 6100 x 2070 mm X-axis: 6100 mm Y-axis: 2070 mm Z-axis: 125 mm Max. sheet size: 6096 x 2032 mm Max. sheet weight: 240 kg/m² (for 3 - 12 kW) / 400 kg/m² Max. total weight for double table: 5800 kg (for 3 - 12 kW) / 960 kg Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Max. simultaneous speed: 141 m/min Max. acceleration: 14 m/s² Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Table change time: 42 s The HD-FN is equipped with two tables that are automatically exchanged, enabling simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, providing optimal accessibility for optional loading and unloading systems. Control, laser source and cooling are fully integrated within the system. The cutting head features automatic focus adjustment. The system consists of the following components: - Shuttle table (longitudinal position for optimal access to optional loading/unloading systems) - Enclosed cutting chamber with protective glazing - CNC graphical control with touchscreen - Brilase Premium laser source - Cutting head with automatic focus adjustment - Integrated chiller for cutting head and laser source - CAD/CAM software Lantek for programming incl. autonesting - Positioning laser - Sheet check system (automatic detection of sheet position and dimensions) - Automatic nozzle cleaning - Central lubrication - Scrap box - Work area lighting - Multi-chamber extraction system - Light barrier protection for shuttle table - Remote maintenance access - Air conditioning for control cabinet - Equipped according to CE regulations ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steel S235 20 25 30 35 40 Stainless steel 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass (CuZn39Pb3) 10 12 20 20 20 OPTIONS: - Extraction with filter unit - Automatic nozzle changer

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080091 Delivery: Immediate, subject to prior sale Country of origin: Turkey Price: €51,120 Leasing rate: €966.17 Available: 1 unit Press force: 60 t Bending length: 2,550 mm Axes: Y1 / Y2 and X Axis Stroke: 160 mm Distance between uprights: 2,150 mm Throat depth: 250 mm Installation height: 350 mm Drive system: Hydraulic Rapid traverse Y-axis: 120 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 70 mm/s Backgauge travel X-axis: 620 mm (optional R-axis available) Backgauge speed X-axis: 250 mm/s Table height: 813 mm Table width: 104 mm Oil tank: 100 l Motor power: 5.5 kW Length: 3,250 mm Width: 1,200 mm Height: 2,350 mm Weight: 4,250 kg 3 axes (Y1, Y2 and X axis) CNC CONTROL DT-10 - 10" 2D graphic display - Intuitive touch-screen operation (easy finger drawing of bend contours) - User-friendly dialogue programming - Automatic calculation of bending sequence - Automatic calculation of flat length for blank cutting - Graphic product and tool memory - Correction function - USB ports for backup and program transfer - PC software for program creation on PC and transfer to machine via USB Hfjdpswva Igefx Alfog CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning device in the table Intermediates for upper tool clamping Upper tool 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil fill Operating manual in GERMAN or ENGLISH (Symbol photo shows model PBF 30200) ADVANTAGES OF THE PBF SERIES: - Compact design - Economical model thanks to series production of standardized models, with no compromise on quality or accuracy OPTIONS: CNC-controlled R-axis (X travel range = 500 mm) DBend, 3D CAD/CAM import and simulation software (import of STEP, IGES, and DXF files) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,400 Leasing rate: €990.36 Press force: 60 t Bending length: 1,250 mm Axes: 3 (Y1, Y2, X) Stroke: 265 mm Distance between frames: 1,050 mm Throat depth: 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Hodjwird Topfx Alfefg Working speed Y-axis: 10 mm/s Return speed Y-axis: 110 mm/s Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 mm/s Table height: 900 mm Table width: 104 mm Oil tank: 100 l Motor power: 7.5 kW Length: 2,300 mm Width: 1,550 mm Height: 2,850 mm Weight: 4,700 kg Standard features: - 3 axes (Y1, Y2, X) - CNC CONTROL DT-15 - 15" 2D graphic display - Intuitive touch-screen operation (bend contours can be easily drawn with a finger) - User-friendly dialog-based programming - Automatic bend sequence calculation - Automatic calculation of developed length for sheet cutting - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software enabling programs to also be written on a PC and transferred to the machine via USB - Servo-driven back gauge on linear guides and ball screws - Back gauge finger blocks on double linear guides - Top tool 1010/A/75°, segmented and goosenecked - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device, Fiessler AKAS mounted on upper beam - Sheet support arms on linear guides - CE-compliant equipment - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Greater stroke, installation height, and throat depth - Higher approaching and return speed of the upper beam - Higher back gauge movement speed - Back gauge fingers on double linear guides instead of single - More options available, e.g.: additional back gauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem operation, alternative CNC controls, etc. Options: - R-axis - R/Z1/Z2 axes - DBend, 3D CAD/CAM import and simulation software (import of STEP, IGES, and DXF files) - CNC control SKY22 - CNC control Delem DA66 S - CNC control DELEM DA-69S 3D incl. Profile-S PC software with option to import 3D files - Quick-release clamping lever for top tool

Stanje: novo, Condition: New Hfsdpfx Aljwirgnefsg Delivery time: Approx. 14-16 weeks from order Country of origin: Turkey Price: €202,100 Leasing rate: €3,869.08 Pressing force: 320 tons Bending length: 6,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 365 mm Distance between frames: 5,100 mm Side frame throat depth: 450 mm Installation height: 630 mm Drive concept: Hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 1,100 mm Table width: 154 mm Oil tank capacity: 160 l Motor power: 2 x 11 kW Length: 7,500 mm Width: 1,910 mm Height: 3,350 mm Weight: 29,000 kg One servo motor and pump per cylinder 4 axes (Y1, Y2, X, and R) CNC control SKY 22 - Full HD graphics display 21.5" with 2D and 3D visualization of the programmed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with your finger) - User-friendly conversational programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blank - Automatic calculation of bending sequences - Graphic product and tool memory - Correction capability - USB ports and Ethernet connection for import, backup, and program transfer - Windows operating system - IGES, STEP, DXF file import supported Servo-driven backgauge with linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKASam laser safety device, mounted on upper beam Sheet support arms on linear guides Equipped according to CE regulations Filled with oil Operator manual in German or English ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise level - High speed PRICE FCA TURKEY Options: - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,920 Leasing rate: €1,094.69 Pressing force: 60 t Bending length: 2050 mm Axes: 3 (Y1, Y2, X) Stroke: 265 mm Hodpfxswirivs Alfefg Distance between uprights: 1700 mm Throat depth: 450 mm Installation height: 530 mm Drive concept: hydraulic Rapid approach speed Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 110 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 100 l Motor: 7.5 kW Length: 3200 mm Width: 1550 mm Height: 2850 mm Weight: 5600 kg Backgauge: 650 mm 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 2D graphic display, 15" - Intuitive touch-screen operation (simple drawing of bending contour with finger) - User-friendly dialog programming - Automatic calculation of bending sequences - Automatic calculation of blank length for sheet cutting - Graphical product and tool memory - Correction options - USB ports for backup and program transfer - PC software so that programs can be created on a PC and then transferred to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V = 16, 22, 35 and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet supports on linear guides Equipment according to CE regulations Oil filling included Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Increased stroke, installation height, and throat depth - Higher approach and return speed of upper beam - Higher backgauge speed - Backgauge fingers on double instead of single linear guides - More options available, e.g.: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, other CNC controls … OPTIONS: R-Axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamps for the upper tool

Stanje: novo, Condition: New Delivery time: approx. 4-6 months from order Country of origin: Turkey Price: €231,900 Press force: 400 t Bending length: 6050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 5100 mm Throat depth at side frame: 510 mm Installation height: 630 mm Drive concept: Hydraulic Rapid traverse Y-axis: 150 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 150 mm/s Backgauge travel X-axis: 750 mm Oil tank: 160 l Motor power: 2x11 kW Length: 7500 mm Width: 2110 mm Height: 3810 mm Hodpfxewir Ave Alfefg Weight: 34,600 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5" with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour with your finger) - User-friendly programming in dialog mode, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic unfolded length calculation for sheet cutting - Automatic bending sequence calculation - Graphical product and tool memory - Correction capability - USB ports and Ethernet connection for import, backup, and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files Servo-motor driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V=16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipped according to CE regulations Oil fill Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emission - High speed PRICE FCA TURKEY Options: CNC control Delem DA-66 S CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import capability

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 090131 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €4,700 Leasing rate: €109.71 In stock: 1 unit Shaft diameter: 50 mm Roller diameter: 155 mm Driven rollers: 2 Hfsdpfswiq S Asx Alfog Motor power: 1.5 kW Speed: 4.5 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 40x10 mm Flat bar flat (cross-section / min. diameter): 100x15 mm / 450 mm; 60x15 mm Square bar (cross-section / min. diameter): 35x35 mm / 900 mm; 20x20 mm Round bar (cross-section / min. diameter): Ø 35 mm / 600 mm; Ø 30 mm Tube (cross-section / min. diameter): Ø 70x2 mm / 1,000 mm; Ø 30x2 mm Rectangular tube upright (cross-section / min. diameter): 70x30x2 mm / 1,200 mm; 50x30x2 mm Square tube (cross-section / min. diameter): 50x50x3 mm / 1,700 mm; 40x40x3 mm Angle iron legs outside (cross-section / min. diameter): 50x50x5 mm / 800 mm; 40x40x4 mm Angle iron legs inside (cross-section / min. diameter): 50x50x6 mm / 1,000 mm; 30x30x4 mm Length: 1,050 mm Width: 750 mm Height: 1,450 mm Weight: 390 kg 2 mechanically driven rollers Robust cast steel construction Shafts made from hardened and ground special steel Manual adjustment of top roller Hardened universal rollers Side straightening rollers manually adjustable on one axis Can be used horizontally and vertically Foot pedal for forward and reverse drive Machine and equipment in compliance with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!