Hesse By Isitan R 1050 X 75 nakup rabljenega (103.926)

Stanje: novo, Stanje novo Dobavni rok približno 12 tednov od naročila Država izvora Turčija Cena 33.000 € Leasing rata 630,3 € Dolžina upogibanja 2530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predupogibom - konstrukcijsko jeklo 4 mm Premer zgornjega valja 190 mm Moč motorja 5,5 kW Dolžina 4250 mm Širina 1200 mm Višina 1150 mm Teža 3750 kg 3 valji Asimetrična razporeditev valjev - s predupogibom 2 gnana valja Motoriziran pomik stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj izhodno nagibljiv naprej Možnost dela naprej/nazaj Kaljeni valji Premična upravljalna konzola Lrsdpfx Aajynm E Ijmop Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolična slika)

Stanje: novo, Stanje novo Dobavni rok cca 12 tednov od naročila Država izvora Turčija Cena 27.800 € Leasing obrok 530,98 € Dolžina upogibanja 3030 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo 4 mm Maks. debelina pločevine brez pred-upogibanja - konstrukcijsko jeklo 4 mm Maks. debelina pločevine s pred-upogibanjem - konstrukcijsko jeklo 2 mm Premer zgornjega valja 180 mm Moč motorja 4 kW Dolžina 4600 mm Širina 1120 mm Višina 1020 mm Teža 4250 kg 3 valji Asimetrična razporeditev valjev - s pred-upogibanjem 2 gnana valja Motorizirano nastavljanje stranskega in pritiskalnega valja Digitalni prikaz položaja stranskega in pritiskalnega valja Zgornji valj se lahko izklopi naprej Tek naprej/nazaj Kaljeni valji Premična upravljalna plošča Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna slika) Ljdpfx Aajynm Ezomorp

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Equipment according to CE regulations Ljdjynm Euepfx Aamerp OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Lredpoynm Ensfx Aamop Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Ledpsynm Ehjfx Aamjrp Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending (D=5x top roll): 20 mm Max. plate thickness without pre-bending (D=1.5x top roll): 16 mm Max. plate thickness with pre-bending (D=5x top roll): 16 mm Max. plate thickness with pre-bending (D=1.5x top roll): 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4-roll design Full hydraulic drive of top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Lredpfeynm Ebjx Aamsp Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Maximum sheet thickness is 50% of the rated capacity Ljdpfx Aaoynm D Rsmerp Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Pressing force: 220 tons Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control unit SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction option - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, and DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on the upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-clamping lever for the upper tool Lrodpfxjynm Ame Aamop

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity - structural steel: 9 mm Max. plate thickness without pre-bending at D=5x upper roll: 9 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 7 mm Max. plate thickness with pre-bending at D=5x upper roll: 7 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Lredoynmzpspfx Aamjp Top roll drive by hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2,050 mm Max. bending capacity – mild steel: 20 mm Max. sheet thickness without prebending at D=5x upper roll: 20 mm Max. sheet thickness without prebending at D=1.5x upper roll: 16 mm Max. sheet thickness with prebending at D=5x upper roll: 16 mm Max. sheet thickness with prebending at D=1.5x upper roll: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4,350 mm Width: 1,700 mm Height: 1,850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive for upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations Ljdpfx Aaoynmylomjrp OPTIONS (PRICES ON REQUEST): Steplessly variable rolling speed Hydraulic side support Hydraulic top support NC control system IMPORTANT NOTES ON CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity – mild steel: 10 mm Max. plate thickness without pre-bending (at D = 5x top roll): 10 mm Max. plate thickness without pre-bending (at D = 1.5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 5x top roll): 8 mm Max. plate thickness with pre-bending (at D = 1.5x top roll): 6 mm Top roll diameter: 200 – 220 mm Lower roll diameter: 200 – 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gears and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Lodpfxeynmyfs Aamorp IMPORTANT POINTS FOR CONE BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be a maximum of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roller: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 10 mm Max. sheet thickness with pre-bending at D=5x top rollers: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 8 mm Top roller diameter: 220 mm Lower roller diameter: 200 mm Side roller diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4-roll design Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll lifting Hydraulic drop-end bearing 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Ljdpfjynmx Ijx Aamjrp Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: približno 8 tednov po naročilu Država porekla: Turčija Cena: 29.460 € Leasing obrok: 562,69 € Debelina pločevine - gradbeno jeklo: 0,4 - 4 mm Največja širina pločevine: 100 mm Maksimalni presek: 400 mm² Lodpfx Aswiri Njamorp Premer podajalnih valjev: 80 mm Podajalna hitrost: 75 m/min Podajalno pospeševanje: 10 m/s² Navor motorja: 10 Nm Stožčato cilindrični menjalnik WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem FESTO Servo pogon in krmiljenje SIEMENS 7" barvni zaslon na dotik SIEMENS 2 gnana valja Zunanji enkoder OPCIJA: Ročno kolo in Simlinx modul za daljinsko vzdrževanje: 4.290 €

Stanje: novo, Leto izdelave: 2024, Stanje novo Leto proizvodnje 2024 Številka zaloge 9739 Lodswiruropfx Aamerp Dobavni rok takoj, prodaja vmes možna Država porekla Turčija Cena 22300 € Leasing obrok 428,16 € Prodajni hit 1 Na zalogi 1 Dolžina upogibanja 2030 mm Maks. zmogljivost upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez pred-upogiba - konstrukcijsko jeklo 6 mm Maks. debelina pločevine z upogibanjem - konstrukcijsko jeklo 5 mm Premer zgornjega valja 170 mm Moč motorja 4 kW Dolžina 3600 mm Širina 1020 mm Višina 1120 mm Teža 2400 kg 3 valji Asimetrična postavitev valjev - s pred-upogibanjem 2 gnana valja Motoriziran pomik stranskega in stiskalnega valja Digitalni prikaz položaja stranskega in stiskalnega valja Zgornji valj se nagne naprej Tek naprej/nazaj Utrjeni valji Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolična slika)

Leto izdelave: 2018, stanje: novo, Stanje: novo Leto izdelave: 2018 Številka zaloge: 070033 Dobavni rok: takoj, vmesna prodaja možna Država izvora: Turčija Lrodewiqtmepfx Aamop Cena: 20.310 € Leasing rata: 389,95 € Na zalogi: 1 Debelina pločevine - konstrukcijsko jeklo: 0,6 - 4 mm Maks. širina pločevine: 300 mm Maks. presek: 900 mm² Premer podajalnih valjev: 80 mm Motorni navor: 10 Nm Motor: 2,62 kW Dolžina: 1000 mm Širina: 800 mm Višina: 1400 mm Teža: 330 kg DEMO STROJ Stožčasto-valjčno gonilo WATTDRIVE Pnevmatski sistem Festo Krmiljenje Schneider z zaslonom na dotik 2 pogonska valja Modul za daljinsko vzdrževanje Rokovska ročka Euchner Navodila v nemščini z izjavo o skladnosti CE

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €112,800 Leasing rate: €2,131.92 Press force: 220 t Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Clearance between uprights: 2,600 mm Throat depth: 410 mm Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Ledpfx Aaswirthjmerp Motor: 11 kW Length: 4,250 mm Width: 1,770 mm Height: 2,900 mm Weight: 12,250 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X and R) - CNC controller SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programmed workpiece - Intuitive touch-screen operation (easy drawing of bending contours by finger) - User-friendly dialogue programming in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for blank cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction capability - USB ports and Ethernet connection for import, backup, and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files - Servo-driven backgauge on linear guides and ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and goosenecked - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Fiessler AKAS laser safety device mounted on upper beam - Sheet support arms on linear guides - Equipment according to CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emission - High speed Options: - Z1/Z2 axes - CNC controller Delem DA-66S - CNC controller DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick clamping lever for upper tool

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €144,300 Leasing rate: €2,727.27 Press force: 320 t Bending length: 3,050 mm Axes: Y1 / Y2 / X and R axis Stroke: 365 mm Distance between uprights: 2,600 mm Throat depth: 410 mm (side frame) Lrsdpfxswiqpho Aamjp Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2 x 11 kW Length: 4,300 mm Width: 1,820 mm Height: 3,330 mm Weight: 16,500 kg ONE SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22: - Full HD graphic display 21.5” with 2D and 3D visualization of programmed part - Intuitive touchscreen operation (easy drawing of bending contour with finger) - Operator-friendly dialog-based programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet blank - Automatic bend sequence calculation - Graphical product and tool storage - Correction function - USB ports and Ethernet connection for import, backup, and program transfer - Windows operating system - Import support for IGES, STEP, DXF files Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning system Top tool 1010/A/75°, segmented and gooseneck 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) Fiessler AKASam laser safety device mounted on upper beam Sheet support arms on linear guides Equipment according to CE standards Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Hydraulics operate only during upper beam movement - Low energy consumption - Low noise emission - High speed Options: Z1/Z2 axes CNC control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-release clamping levers for the upper tool

Stanje: novo, Stanje: novo Dobavni rok: cca 8 tednov od naročila Država izvora: Turčija Cena: 29.990 € Leasing obrok: 572,81 € Debelina pločevine – konstrukcijsko jeklo: 0,4 – 3,5 mm Maks. širina pločevine: 200 mm Maks. presek: 700 mm² Premer pogonskih valjev: 80 mm Hitrost podajanja: 75 m/min Pospešek podajanja: 10 m/s² Navor motorja: 10 Nm Stožčasto čelno zobniško gonilo: WATTDRIVE (Izdelano v Avstriji) Pnevmatski sistem: FESTO Servo pogon in upravljanje: SIEMENS Lrsdpfx Aaswirqmsmop 7" barvni zaslon na dotik: SIEMENS 2 pogonska valja Zunanji enkoder OPTIONALNO: Ročno kolo in Simlinx modul za daljinsko vzdrževanje: 4.290 €

Stanje: novo, Leto izdelave: 2025, Sheet width: 1320 mm Sheet thickness: 2.5 mm mild steel Sheet thickness in stainless steel: 1.2 mm Blade length: 1350 mm Strokes per minute: 34 Backgauge – adjustable, max. 825 mm Cutting angle: 1.5° Working height: 810 mm Control: conventional Motor power: 3.0 kW Weight: 1100 kg Dimensions (L-W-H): 1950 x 1450 (2000) x 1200 mm Demonstration machine – as NEW Not yet put into operation (!!) Special price on request Equipment: - Robust electro-mechanical guillotine shear - Heavy-duty / robust drive motor - Manual backgauge, incl. analogue position display Lredpfxsxabz He Aamep * Adjustment range max. 825 mm - Manual blade gap adjustment - 2x table side stops including mm-scale - 1x front stop bar – manually adjustable - 2x front support arms - Recessed hand grip in front worktable - 1x free-moving foot switch, incl. EMERGENCY stop button - Control cabinet/operator panel – front right - Rear safety device - Rear sheet metal chute - Connection cable + plug

Stanje: novo, Širina pločevine 1550 mm Lsdpfx Aezkbn Ieamorp Debelina pločevine 4,5 mm Ukrivljenost 4,0 mm Dolžina valja 1550 mm Najmanjši premer približno 190 mm Premer valja – zgornji 140 mm Hitrost upogibanja 3,0 m/min Moč motorja 2,2 kW Teža 1420 kg Dimenzije (D-Š-V) 2700 x 750 x 1000 mm Oprema: - robusten elektromehanski stroj za okroglo upogibanje - 2 x osrednji valji, pogonjeni z elektromotorjem (zgornji in spodnji valj) - zgornji valj se lahko ročno premika vstran, z vrtljivim ležajem - vključno z napravo za konično upogibanje - prosto premikajoča se upravljalna plošča - spodnji valj se lahko ročno premika, z ročnim kolesom - asimetrična razporeditev valjev - samozavori glavni motor - varnostna naprava (varnostna vrvica z enoto stikala) - oznaka CE/izjava o skladnosti Posebna oprema, vključena v ceno: - kaljeni valji - motorično nastavljanje stranskih valjev - digitalni prikazovalnik položaja za motorično nastavljiv stranski valj

Stanje: novo, število valjev: 4, – 4 valji – Kapaciteta: 1270 x 4/5 mm – Kapaciteta predpregibanja: 1270 x 3/4 mm – Kaljeni valji – Valjanje stožcev – Premer zgornjega valja: 130 mm – Premer spodnjega valja: 130 mm – Premer stranskih valjev: 130 mm – Digitalni prikaz gibanja levega valja – Digitalni prikaz gibanja srednjega spodnjega valja – Digitalni prikaz gibanja desnega valja – Zgornji valj hidravlično izmenljiv – Jeklena konstrukcija ST-52 – Zaščita pred preobremenitvijo – Dokumentacija Lredpfxexytlqj Aamsp – 400V

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital position displays Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Lrodpfxjiffwqo Aamsp Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 - ST 42 structural steel)

Stanje: novo, Leto izdelave: 2025, – 4 valji – Kapaciteta: 1270 x 4,5 mm Ljdsxdvafspfx Aamsrp – Kapaciteta pred-upogiba: 1270 x 3,5 mm – Kaljeni valji – Premer zgornjega valja: 130 mm – Premer spodnjega valja: 110 mm – Premer stranskih valjev: 110 mm – Digitalni prikaz za premik levega valja – Digitalni prikaz za premik sredinskega spodnjega valja – Digitalni prikaz za premik desnega valja – Jeklena konstrukcija ST-52 – Dokumentacija – 400V

Stanje: rabljeno, Leto izdelave: 2015, Leto izdelave: januar 2015 Lredpfx Aaex T Afismep Serijska številka: 280/75 r 22.5 Lep terminalni vlačilec. Opremljen s težko obremenjenimi pnevmatikami na platiščih.

Stanje: rabljeno, Leto izdelave: 2005, Leto izdelave: november 2005 Serijska številka: 280/75 R 22.5 NA PLATIŠČU, 10 LUKENJ. POSEBNE TEŽKO OBOREMENJENE PNEVMATIKE ZA TERMINALSKE VLAČILCE 10/28 MM Lrjdpfx Ajxwk Ttjamjp