Hesse By Isitan Idk 2 nakup rabljenega (83.959)

Stanje: novo, Stanje: novo Dobavni rok: cca 12 tednov od naročila Država izvora: Turčija Cena: 30.900 € Leasing obrok: 590,19 € Pritisk stiskalnice: 200 t Cilinder fiksni ali vodoravno pomičen Hod: 300 mm Čista razdalja med stebri: 1.900 mm Premer bata: 320x210 mm Delovna hitrost: 5 mm/s Hitrost povratka: 20 mm/s Dolžina: 2.460 mm Širina: 1.600 mm Višina: 2.700 mm Teža: 4.800 kg Z ročnim kolesom vodoravno pomični cilinder Jeklena varjena konstrukcija Poljubna stop pozicija Prikaz pritiska Fpjdpfxeypbvkj Aprok Varnostni ventil proti preobremenitvi 2 V-prizme Nastavljiva višina mize Dvig/spust mize Upravljanje z ročico Oprema skladna s CE predpisi Navodila za uporabo v nemščini in angleščini (Simbolna slika prikazuje model HDK 1570/150)

Stanje: novo, Stanje novo Dobavni rok cca. 10 tednov od naročila Država izvora Turčija Cena 17.700 € Leasing obrok 339,84 € Tlačna moč 100 t Cilinder fiksen ali pomičen: fiksen Hod 300 mm Vgradna višina 680 mm Svetla širina stojala 1520 mm Hitrost hitrosti 8 mm/s Delovna hitrost 5 mm/s Povratna hitrost 10 mm/s Miza 500x1520 mm Prehodna odprtina v mizi 100 mm Razmak med luknjami 190 mm Dolžina 2630 mm Širina 1000 mm Višina 2350 mm Teža 2500 kg 2 vodili Tlačna plošča z utori v obliki črke T Miza z utori v obliki črke T Manometer Hitra dovoza z avtomatskim preklopom na delovno hitrost Globina stiskanja nastavljiva z ekscentrom Fpodpfx Apsypbq Ierok Dvo-ročno upravljanje Miza nastavljiva po višini Opremljeno po predpisih CE Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Fpjdjypbqnjpfx Aprok Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Fodpfx Apsypbqherjpk Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Fpjdpfx Apsypbqbjrsk Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Fpedeypbp Dspfx Aprsk Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Novo stanje Rok isporuke oko 12 nedelja od naručivanja Zemlja porekla: Turska Cena: 20.700 € Leasing rata: 397,44 € Pritisna snaga: 150 t Cilindar: fiksni ili pomični – fiksni Dužina savijanja: 1.000 mm Hod: 300 mm Međustubna širina: 1.020 mm Fpodpfx Aewiru Esprsk Razmak između stola i nosača alata: 610 mm Brzi hod: 9 mm/s Radna brzina: 5 mm/s Brzina povratka: 10 mm/s Maksimalni kapacitet savijanja (konstrukcijski čelik): 8 mm Sto: 600 x 1.020 mm Prolazna rupa u stolu: 100 mm Razmak rupa: 190 mm Dužina: 2.110 mm Širina: 1.000 mm Visina: 2.450 mm Težina: 2.400 kg 2 vodilice Velika ploča klipa i veliki stol za oslonac sa T-utorima Gornji i donji alat za savijanje Manometar Brzo premeštanje sa automatskim prebacivanjem na radnu brzinu Mogućnost zaustavljanja klipa u bilo kojoj poziciji Ručni i dvoručni rad Sto podesive visine Oprema u skladu sa CE direktivama Uputstvo za upotrebu na nemačkom i engleskom jeziku

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 080109 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €68,282 Fjdpfx Ajwiq Siepropk Leasing rate: €1,135.89 Bestseller: 1 Available in stock: 1 Special price: €60,100 Pressing force: 120 tons Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 180 mm Distance between uprights: 2550 mm Side frame throat depth: 250 mm Installation height: 375 mm Drive concept: hydraulic Rapid traverse Y-axis: 100 mm/s Working speed Y-axis: 9 mm/s Return speed Y-axis: 77 mm/s Backgauge travel (X-axis): 620 mm (with optional R-axis) Backgauge speed X-axis: 250 mm/s Table height: 878 mm Table width: 104 mm Oil tank: 150 l Motor power: 11 kW Length: 3750 mm Width: 1230 mm Height: 2400 mm Weight: 5900 kg 4 axes (Y1, Y2, X, and R axis) CNC CONTROL DT-10 - 2D graphic display 10" - Intuitive touchscreen operation (easy drawing of bend contours with finger) - User-friendly dialogue programming - Automatic calculation of bending sequences - Automatic calculation of flat length for sheet cutting - Graphical product and tool storage - Correction options - USB ports for backup and program transfer - PC software for writing programs on the PC and transferring to the machine via USB CNC-controlled backgauge with linear guides and ball screws CNC-controlled crowning system in the table Intermediate pieces for upper die clamping Upper die 1010/A/75°/0.8, segmented, bending radius hardened and ground Die holder for 60 mm dies Die 2009/85° (V 16, 22, 35, 50 mm) segmented, entry radii hardened and ground Laser safety device Fiessler AKAS mounted on the upper beam Sheet support arms Side and rear safety guards Equipment according to CE regulations Oil fill Operating instructions in GERMAN and ENGLISH ADVANTAGES OF THE PBF SERIES: - Compact design - Cost-effective model thanks to series production of standardized models, with no compromises on quality and precision OPTION: DBend, 3D CAD/CAM import and simulation software (import of step, iges, and dxf files) WE HAVE MORE THAN 600 REFERENCES!

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roller: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roller: 7 mm Max. sheet thickness with pre-bending at D=5x top roller: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roller: 5 mm Top roller diameter: 245 mm Bottom roller diameter: 245 mm Side roller diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rollers Top roller drive via hydromotor and planetary gearbox, bottom roller drive via gear and cardan shaft Hydraulic adjustment of bottom and side rollers Digital readout for bottom and side roller positions Hardened rollers Cone bending device Hydraulic relief for top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel CE-compliant equipment OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Fjdpfeyb Sz Ijx Aprspk The max. sheet thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,900 mm Width: 1,150 mm Height: 1,250 mm Fpsdpfx Apeyb Sywjrsk Weight: 4,600 kg 4-roll system Top roll drive via hydraulic motor and planetary gearbox, bottom rolls driven by gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop end 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness, pre-bending at D=5x top roll: 13 mm Max. sheet thickness, pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness, with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness, with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Fpedpfeyb Sydsx Aprsk Hardened rolls Cone bending device Hydraulic relief of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE specifications OPTIONS: Stepless variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2,050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness without pre-bending at D=5x top roll: 6 mm Max. plate thickness without pre-bending at D=1.5x top roll: 4 mm Max. plate thickness with pre-bending at D=5x top roll: 4 mm Max. plate thickness with pre-bending at D=1.5x top roll: 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4,250 mm Width: 960 mm Height: 1,100 mm Weight: 2,800 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Fpodpfxsyb Szbo Aprok Overload protection Movable control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Fpjdpfoyb Sy Rsx Aprok Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll relief Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulation OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum plate thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Fodsyb Szuspfx Aprjpk Price: €46,300 Leasing rate: €884.33 Bending length: 2,050 mm Max. bending capacity – mild steel: 11 mm Max. plate thickness without pre-bending at D=5x top roll: 11 mm Max. plate thickness without pre-bending at D=1.5x top roll: 9 mm Max. plate thickness with pre-bending at D=5x top roll: 9 mm Max. plate thickness with pre-bending at D=1.5x top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4,400 mm Width: 1,150 mm Height: 1,250 mm Weight: 4,080 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox; bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment compliant with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: Max. plate thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Fsdpfx Apsyb Sykjrjpk Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg 4 rollers Top roll drive via hydraulic motor and planetary gearbox; bottom roll driven via gears and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for position of bottom and side rolls Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment conforms to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the rated capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Stanje: novo, Stanje: novo Dobavni rok: pribl. 12 tednov od naročila Država izvora: Turčija Cena: 12.630 € Leasing obrok: 242,5 € Debelina pločevine - konstrukcijsko jeklo: 0,4 - 2 mm Največja širina pločevine: 200 mm Maks. presečna površina: 300 mm² Premer podajalnih valjev: 63 mm Hitrost podajanja: 150 m/min Pospešek podajanja: 10 m/s² Pnevmatski sistem FESTO Fjdpoynncbefx Aprepk Servo pogon in krmiljenje SIEMENS SIEMENS 7" barvni zaslon na dotik 2 podajalna valja MOŽNOST: Ročni volan in Simlinx daljinski servisni modul € 4.290,--

Stanje: novo, Stanje: novo Dobavni rok: približno 3-6 tednov po naročilu Država izvora: Turčija Cena: 130.600 € Leasing obrok: 2.468,34 € Pritisna sila: 200 t Dolžina mize: 1.200 mm Širina mize: 740 mm Prehodna odprtina v mizi: 220 mm Hod: 24 - 140 mm Število hodov: 50 1/min Tlačilo: 950 x 600 mm Nastavitev tlačila: 100 mm Globina: 390 mm Motor: 15 kW Dolžina: 2.350 mm Širina: 1.700 mm Fpjdpfx Ajynnb Dsprok Višina: 3.435 mm Teža: 14.900 kg 8-točkovno vodilo tlačila Sprednje varovalo z varnostno svetlobno zaveso Motorizirana nastavitev tlačila Hidravlična zaščita pred preobremenitvijo Avtomatsko mazanje Oprema v skladu s CE direktivami Navodila za uporabo v NEMŠČINI in ANGLEŠČINI

Stanje: novo, Stanje novo Dobavni rok približno 12 tednov od naročila Država izvora Turčija Cena 33.000 € Fodpfx Asynm E Ispropk Leasing rata 630,3 € Dolžina upogibanja 2530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predupogiba - konstrukcijsko jeklo 6 mm Maks. debelina pločevine s predupogibom - konstrukcijsko jeklo 4 mm Premer zgornjega valja 190 mm Moč motorja 5,5 kW Dolžina 4250 mm Širina 1200 mm Višina 1150 mm Teža 3750 kg 3 valji Asimetrična razporeditev valjev - s predupogibom 2 gnana valja Motoriziran pomik stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj izhodno nagibljiv naprej Možnost dela naprej/nazaj Kaljeni valji Premična upravljalna konzola Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolična slika)

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2550 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 350 mm Bottom roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5500 mm Width: 2000 mm Height: 1900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Movable control panel Equipment according to CE regulations Fpodpfx Aeynm Eusprok OPTIONS: Infinitely adjustable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Lease rate: €1,840.86 Bending length: 2,050 mm Fpsdsynm Enspfx Aprsk Max. bending capacity (mild steel): 30 mm Max. plate thickness without pre-bending at D=5x upper roll: 30 mm Max. plate thickness without pre-bending at D=1.5x upper roll: 25 mm Max. plate thickness with pre-bending at D=5x upper roll: 25 mm Max. plate thickness with pre-bending at D=1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,000 mm Width: 2,000 mm Height: 1,900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower rolls Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONICAL ROLLING: The max. plate thickness is 50% of the rated capacity The cone length may be a maximum of 30% or must be at least 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2,050 mm Max. bending capacity (mild steel): 16 mm Max. sheet thickness without prebending at D=5x top roll: 16 mm Max. sheet thickness without prebending at D=1.5x top roll: 13 mm Max. sheet thickness with prebending at D=5x top roll: 13 mm Max. sheet thickness with prebending at D=1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,300 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,100 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital position display for lower and side rolls Hardened rolls Fpjdpfx Apsynm Ehjrsk Cone bending device Hydraulic relief for top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment complies with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roller: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 5x top roller: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roller: 6 mm Top roller diameter: 260 mm Bottom roller diameter: 260 mm Side roller diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rollers Top roller driven by hydraulic motor and planetary gearbox, bottom rollers driven by gear drive and cardan shaft Hydraulic adjustment of bottom and side rollers Digital display for bottom and side roller positions Hardened rollers Cone bending device Hydraulic release of the top roller Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Fpedpfx Apeynm D Rsrsk Maximum sheet thickness is 50% of the rated capacity Cone length must be a maximum of 30% or more than 60% of the roller length Hardened rollers are recommended

Stanje: novo, Condition new Delivery time approx. 12 - 14 weeks from order Country of origin Turkey Price €72,300 Leasing rate €1,366.47 Press force 40 t Bending length 1250 mm Fpjdpfx Apsynm Ayorek Axes Y1 / Y2 / X and R axis Stroke 200 mm Distance between uprights 1050 mm Throat depth (side frame) 250 mm Installation height 440 mm Drive concept: servo spindle drive Rapid traverse Y-axis 115 mm/s Working speed Y-axis 10 mm/s Return speed Y-axis 115 mm/s Backgauge travel X-axis 650 mm Backgauge travel R-axis 250 mm Table height 1000 mm Motor output 7.2 kW Length 1950 mm Width 1450 mm Height 2650 mm Weight 3600 kg STANDARD EQUIPMENT: - Servo-driven spindle drive - 4 axes (Y1, Y2, X and R) - Color graphic control DELEM DA-66S - 17" color touchscreen - 3D visualization in simulation and production - Suitable for full Windows applications - Compatible with DelemModusys - USB and peripheral interface - Custom application support - Sensor, bending, and correction interface - Servo-driven backgauge with linear guides and recirculating ball screws - CNC-controlled crowning - Upper tool 1010/A/75°, segmented and goosenecked - 4-way bottom die block 60x60 2009 (V= 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS, mounted on upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Operating instructions in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - Higher productivity compared to traditional hydraulic press brakes due to almost delay-free response to the foot pedal signal - Lower energy consumption - Compact drive spindle unit with a low number of components - No hydraulic components Options: - Z1/Z2 axes - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-release clamping lever for the upper tool

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €127,400 Leasing rate: €2,407.86 Pressing force: 220 tons Fsdpfjynm Amex Aprjpk Bending length: 4050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between uprights: 3600 mm Throat depth: 410 mm Installation height: 530 mm Drive concept: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 12 mm/s Return speed Y-axis: 180 mm/s Backgauge travel X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 15,000 kg ONE SERVO MOTOR AND PUMP PER CYLINDER Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC control unit SKY 22 - Full HD graphic display 21.5” with 2D and 3D representation of the programed workpiece - Intuitive touchscreen operation (easy drawing of the bending contour with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of flat length for sheet cutting - Automatic calculation of bending sequences - Graphic product and tool memory - Correction option - USB ports and Ethernet connection for import, backup, and program export - Windows operating system - Import support for IGES, STEP, and DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A/75°, segmented and offset - 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm) - Laser safety device Fiessler AKAS mounted on the upper beam - Sheet support arms on linear guides - Equipment complies with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during upper beam movement - Low energy consumption - Low noise emissions - High speed Options: - Z1/Z2 axes - CNC control Delem DA-66 S - CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability - Quick-clamping lever for the upper tool

Stanje: rabljeno, Leto izdelave: 2023, Condition: Used Year of manufacture: 2023 Stock number: 070029 Delivery time: Prompt, subject to prior sale Country of origin: Turkey Fjdpfxoynmzio Aprspk Price: €19,600 In stock: 1 unit Press force: 150 t Cylinder: Fixed or movable: Fixed Bending length: 1,520 mm Stroke: 300 mm Clearance between uprights: 1,520 mm Distance between table and tool holder: 610 mm Rapid traverse speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Max. bending capacity (mild steel): 10 mm Table: 600 x 1,520 mm Drop-through hole in table: 100 mm Hole pitch: 190 mm Length: 2,630 mm Width: 1,000 mm Height: 2,450 mm Weight: 3,270 kg 2 guides Large ram plate and large support table with T-slots Upper and lower tools for bending Pressure gauge Rapid approach with automatic switch-over to working speed Piston stop at any position Two-hand operation AND foot pedal Height-adjustable table Equipment complies with CE regulations Operating manual in GERMAN and ENGLISH