Fortuna A 4 nakup rabljenega (104.552)

Stanje: novo, Rexroth MAC117B-0-WS-4-C/130-A-1/WI1521LV motor s permanentnim magnetom, MNR: R911245926 , SN:MAC117-00854 , neuporabljen z sledovi skladiščenja, 100 % delujoč, dobava po slikah Laodpoi D Ngnsfx Al Nja

Stanje: rabljeno, Dear Sir or Madam, Lasdpfowv Nlhox Al Nea We hereby offer you a Grundfos TP 150-530/4 A-F-A-DBUE equipped with a Siemens 1LG6 253-4AA91-Z motor.

Stanje: rabljeno, Leto izdelave: 2011, Lathes Travel X-axis: 270 mm Travel Y-axis: 120 mm Travel Z-axis: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Max. torque: 680 Nm Spindle speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Chip conveyor Short bar loading magazine IRCO ILS-RBK 100/16 Various main spindle reduction tubes NC-controlled workpiece removal unit Conveyor belt for transporting workpieces out of the machine Coolant system 8/20 bar with immersion cooler Ledpewwv Ifsfx Al Neaa Coolant spray gun Chip conveyor Oil mist extraction unit Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loading magazine Main spindle as integrated spindle motor ISM 102 Sub-spindle as integrated spindle motor ISM 76

Stanje: dober (rabljeno), High-performance spot welding machine in 3-phase DC configuration DALEX, type PMS 14-4 G3 Arm reach: 550 mm Ljdpfxsgqxg Ae Al Njaa Rated power at 50% duty cycle: 240 kVA Secondary short-circuit current: 89.5 kA Secondary open-circuit voltage: 4.69 – 9.38 V Electrode force: 80–1200 daN with double-stroke cylinder and approach stroke Lower arm support Weight: 1,660 kg Mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous dual-circuit welding control 8036 S3 Machine is currently being overhauled

Stanje: dober (rabljeno), Gear motor, electric motor, geared electric motor - Manufacturer: VEM, Gear motor type ZG2 KMR A 80 K 4 - Speed: 330 rpm - Power: 1.1 kW - Design: B5 - Shaft: Ø 28 x 60 mm - Protection class: IP44 - Dimensions: 450/158/H220 mm - Weight: 24 kg Laodpfxop Dyc Ej Al Noa

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, We are selling a new Weishaupt dual-fuel burner -mu Type WM-GL20/4-A with digital burner management system WFM This unit was purchased as a backup but has never been used and still comes in its original packaging. Lasdpfeww Taxex Al Nja Version ZM-R-3LN (SuperLowNOx) Output range (natural gas): 300 - 2450 kW Output range (heating oil EL): 350 - 2450 kW Fully automatic, sliding/two-stage or modulating operation on both oil and gas side, depending on the type of capacity control. Gas-side modulation range up to 1:8 possible. Oil-side modulation range up to 1:5 possible. Suitable for combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet, with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling frequency converter (included) Combustion air regulation with actuator Fuel system consisting of high-pressure gear pump with pressure regulating valve, solenoid valves as safety quick-shutoff device, nozzle holder and nozzle Magnetic clutch for deactivating the oil pump during gas operation Mixing device consisting of burner head and diffuser plate, continuously adjustable for optimal combustion results Ignition unit consisting of: high-voltage ignition transformer, ignition cable with plug connection, and ignition electrodes Burner management system for control of all burner functions and capacity regulation via electronic compound control Suitable for continuous operation according to TRD 411 and 412 Flame monitoring via UV cell Digital burner management: With the help of the W-FM 100 and W-FM 200* burner management systems, the operation of a combustion plant becomes more convenient and safer. All essential functions, such as fuel and air supply or flame monitoring, are precisely recorded and regulated digitally. The goal is to optimize operation, maximize efficiency, and minimize emissions. Thanks to digital burner management, such optimization can now be achieved with limited effort. Installation and maintenance requirements are significantly lower than with conventional technology. For example, a separate control panel for burner control is no longer necessary. In addition, remote control, remote diagnostics, and third-party monitoring of the system are possible, further increasing operating safety and convenience for the user.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.500 kg, največja dovoljena obremenitev: 80.000 kg, skupna masa: 91.500 kg, velikost pnevmatike: 295 60 R 22,5, Leto izdelave: 2026, model šasije: Lider Heavy-Duty Chassis, Oprema: ABS, Težko-namenska nova nizkopodna polprikolica Lider Trailer za težke prikolice Lajdpfxercig Sj Al Nja Visoka kakovost in vzdržljivost izdelave Standardi EU. Dvojni zavorni sistem. Enoletna garancija na napake v proizvodnji. Barva po želji kupca. Proizvodnja 2026.

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, The Fillpack 4-Head Pocket Dosing Machine is an ideal solution for fast and precise portioning of ready-to-eat foods. Equipped with four dosing heads, it enables efficient tray filling and ensures even distribution of the products. It is particularly suitable for preparations such as Cantonese rice, tabbouleh, and pasta, offering a wide range of applications in the food processing industry. Thanks to its advanced design, it integrates seamlessly into production lines, delivering high throughput while maintaining excellent dosing accuracy. This dosing machine stands out for its ability to minimize product loss through its efficient dosing system. It can handle various product volumes and textures, making it a versatile piece of equipment to meet the diverse needs of producers. In addition, the Fillpack pocket dosing machine ensures clean, waste-free operation, thus contributing to the optimization of production processes. Its use not only enhances efficiency but also maintains high quality standards throughout the packaging process. Technical specifications: - 4 heads - Manufacturer: Fillpack - Max output (previous use): 70 cycles/minute, i.e., 280 trays/minute - Previously dosed products: Cantonese rice, tabbouleh, pasta, etc. - Year: 2016 Laodpfx Aju Ibx Ajl Nja - Dimensions: 3350 x 1580 x 3560 mm - Weight: 600 kg

Leto izdelave: 1970, stanje: pripravljen za uporabo (rabljen), Insgesamt stehen drei Außenrundschleifmaschinen und eine Innenrundschleifmaschine zur Verfügung. 1/2) Zwei baugleiche Außenrundschleifmaschinen SMW AGL 125/5PC, Baujahr: ca. 1970, Spitzenhöhe: 160mm, max. Werkstückbreite: 63mm, max. Werkstückdurchmesser: 180mm, Drehzahl: 1000U/min, Maschinendimensionen X/Y/Z: ca. 2800mm/2800mm/2400mm, Gewicht: ca. 5500kg. 3) Außenrundschleifmaschine Fortuna RSE300/II, max. Schleifscheibendurchmesser: 300mm, Schleiflänge: 600mm, Maschinendimensionen X/Y/Z: ca. 1600mm/1400mm/1550mm, Gewicht: ca. 2000kg. 4) Innenrundschleifmaschine Jung D14 MP7z, schleifbare Bohrung: 8mm-10mm, max. Schleiftiefe: 150mm, Schwingdurchmesser: 450mm, Werkstückspindelbohrung: 35mm, max. Schwenkbarkeit: 30°, Maschinendimensionen X/Y/Z: ca. 2700mm/1300mm/1700mm, Gewicht: ca. 2500kg. Eine Besichtigung vor Ort ist möglich. Einzelverkauf möglich. Lodpfxsympcys Al Noaa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba Lodpfxoy Dg N Te Al Noaa - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Laodpsd Tbbdefx Al Nsa Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Ljdsfdkb Topfx Al Neaa Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. Lasdpfxed Tqalj Al Nea When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Laedpfx Alofdkb Us Nea - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) Ljdpfx Ajguk A Hsl Njaa - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Laodoguk Dkopfx Al Noa Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Ljdpfx Ajfdkbhol Nsaa - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Lasdpfeguk Dvex Al Nea Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2024, Stroj za deljenje in oblikovanje testa Fortuna preša za žemljice, velikost 3 Polavtomatski, 30-delni za najboljše rezultate! Zmogljiva in robustna tehnika Priključek: 400V, 16A-CEE vtikač Mere: 580 x 580 x 1350 mm (ŠxGxV) Rabljeni stroj, očiščen Kakovost iz strokovnega podjetja! Izkoristite več kot 35 let izkušenj! Opcije: Nerjavno jekleno podest Lasdpfjw Tthmox Al Nsa Nov oblikovalni krožnik Servisni paket Vzdrževalna pogodba Usposabljanje in zagon Dostava Obiščite našo razstavo pekarskih strojev!

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za deljenje in oblikovanje testa TOP Fortuna stiskalnica za žemlje Gr. 3 Polavtomatski, 30-delni Delilna glava NOVO obnovljena Novi rezili iz nerjavečega jekla Priključek 400V, vtič 16A-CEE Dimenzije: 580 x 580 x 1350 mm (ŠxGxV) Rabljeni stroj, obnovljen z garancijo in servisom za nadomestne dele Možnosti: Nerjaveče podest Nov oblikovalni krožnik Servisni paket Vzdrževalna pogodba Usposabljanje in zagon Laodpfxjw Hn H Ej Al Nsa Dostavna storitev Preizkusite našo ekskluzivno storitev za vas!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže Laodpeyz Iccjfx Al Nja - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Laedpjy Ehnaefx Al Nea Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Ljdpsy Ehk Ijfx Al Nsaa Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Obsežen nabor dodatne opreme.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 580 mm, skupna širina: 580 mm, skupna višina: 1.350 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 05/2027, vrsta vhodnega toka: trifazni, leto zadnje generalne obnove: 2026, Stroj za deljenje in oblikovanje testa Stiskalnica za žemljice Fortuna, velikost 3 Polavtomat, 30-delni Glava za deljenje NOVO obnovljena NOVO rezila iz nerjavečega jekla VRHUNSKI model Robustna tehnologija Priključek: 400V, 16A-CEE vtič Mere: 580 x 580 x 1350 mm, ŠxGxV Rabljeni stroj, obnovljen in preverjen pri SAB Z jamstvom Možnosti: Inoks podest Nov krožnik za oblikovanje Laedpfxow Hn H Ss Al Noa Servisni paket Vzdrževalna pogodba Uvajanje in zagon Dostava Preizkusite naš ekskluzivni servis za vas!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Lasdpov Ukz Aefx Al Nja Frames are bolted, not pre-assembled. Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement