Ewd Combimes Dk90 nakup rabljenega (115)

Stanje: rabljeno, Količina: 5 kosov Lsdpfezd N Eusx Alcsrt Funkcionalno preizkušeno; artikel izhaja iz razgradnje opreme avtomobilskega dobavitelja Proizvajalec: Cleco / Apex Tool Group Tip: mPro400GCD-SH Napetost: 100–240 V AC ±10 % Frekvenca: 50 / 60 Hz Teža: 12,8 kg Dimenzije: 266,7 mm × 381 mm × 288 mm Kompatibilnost orodja: NeoTek, žična in brezžična orodja Priključki: Ethernet, USB, RS-232, I/O Posebnosti: Hibridno krmiljenje za žična in brezžična orodja

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), Ročni obrezovalni stroj DK 90 je sestavljen iz: 2 podmiznih čelilnih žag, linijskega laserja, obrezovalnika, valjčnega transporterja z ločevalnikom iveri in nagibne mize. Seveda so priložene vse pripadajoče krmilne omare in hidravlična enota. Poleg tega je vključenih več šablon in fiksna glava za letve. Ogled je možen po predhodnem in obveznem dogovoru. Cena je brez vključenega 20% DDV, iz tovarne, brez stroškov demontaže, nakladanja, priprave pogodbe in carinjenja. Lodpfx Aloq U R Etecsrt

Stanje: rabljeno, CLECO kabel za vijačnik Highflex 961104-060 6 m Originalni CLECO kabel za industrijske električne vijačnike in montažne sisteme. Robustna izvedba z industrijskimi okroglimi priključki na obeh koncih. Proizvajalec: CLECO Tip: 961104-060 Oznaka: Kabel Highflex Stanje: rabljeno Lrsdpfx Ajzdafyslcst Dolžina kabla: 6 m Izvedba: Povezovalni kabel za vijačne sisteme Tip kabla: Highflex Priključki: Industrijski okrogli priključki na obeh straneh Barva kabla: Oranžna Količina na zalogi: 4

Leto izdelave: 2002, stanje: dober (rabljeno), Complete Desoutter screwdriving system consisting of: 1 x Transducer-controlled angle screwdriver Desoutter ERA40J Part No.: 6151650800 Torque range: 8 to 40 Nm Drive: 3/8" Speed: 900 rpm Length: 458 mm Weight: 2.1 kg 1 x Transducer-controlled angle screwdriver Desoutter ERA60J Part No.: 6151650810 Torque range: 15 to 60 Nm Drive: 3/8" Speed: 570 rpm Length: 469 mm Weight: 2.2 kg 1 x Screwdriver controller Desoutter MODCVI-2 (rack version of TWINCVI-2) with transformer. Part No.: 6159325210 Screw channels: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO totalizer: 99 Screw result memory: Torque + angle + date + time + result + (barcode): up to 11,600 Screw curves: 6 Possible screwdriving strategies: Torque control with angle monitoring Angle control with torque monitoring Torque/angle control Torque control with angle and gradient monitoring Angle control with torque and gradient monitoring Yield point control Torque holding / Position holding Friction torque test Ledpfx Asdcmizjlcjrt Current plausibility 2 x Motor cables for hand screwdrivers, 5 m in length Part No.: 6159170720 1 x Transducer cable, 5 m in length Part No.: 6159171220 Including operating manuals

Stanje: rabljeno, Količina: 4 kosi Proizvajalec: Cleco / Apex Tool Group Lsdpfx Aszd N Ddslcjrt Tip: mPro400GCD-P Napetost: 100–240 V AC ±10 % Frekvenca: 50 / 60 Hz Teža: 13,7 kg Dimenzije: 266,7 mm × 381 mm × 288 mm Kompatibilnost orodij: NeoTek 30 / 50 / 70, LiveWire, CellCore, CellTek, I-Wrench, serija 18 / 48, serija 17 / 47 / 67 Priključki: 1 × priključek za orodje NeoTek Priključki: 1 × priključek za orodje serije 18 / 48 Komunikacija: 2 × Ethernet RJ45 Komunikacija: 2 × RS-232 Komunikacija: 3 × USB 2.0 I/O: 8 vhodov / 8 izhodov (24 V optično izolirani) Sistemski vodilo: ARCnet / TSnet Pomnilnik: režo za CompactFlash Maksimalna dolžina kabla za orodje: 45 m

Stanje: zelo dobro (rabljeno), Band sawmill consisting of: - Clamping carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for removal of cut timber (manufacturer: SPRINGER) - Elevated operator’s cabin - Rails - Control cabinets - Accessories Optional with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Swaging machine Vollmer PMH - Side (levelling) machine Vollmer EMS Block Bandsaw EWD Esterer EBB1400 Vertical bandsaw for round timber Roller diameter: 1400 mm Roller width: 200 mm Blade width: 206 mm Max. blade thickness: 1.47 mm Max. blade speed: 55 m/s (drive pulleys for summer & winter included) Main motor: 55 kW The crown on the rollers was reground in 2009 Bandsaw Carriage EWD Esterer EW1000 Hydraulic clamping carriage Year of manufacture: 1991 4 clamping blocks Ledpfx Asvtwzmslcert with 3 log turners Max. clamping block opening: 1000 mm Max. hook opening: 930 mm Total length: 6000 mm Total width: 2450 mm Total height: 1750 mm Track gauge: 1300 mm The bandsaw mill was purchased used in 2004/2005, re-installed by Esterer, but was never put into full operation, as almost all cutting was done with the frame saw. Since 2004, the bandsaw has run for only 500 operating hours! Very good condition – immediately available – viewing and demonstration possible by appointment. Sharpening room equipment: 01. Sharpening machine Vollmer CAL 200 Year of manufacture: 2000 Tooth feed from the left CNC automatic machine for grinding rip and block bandsaw blades (straight grinding, wet grinding) Fully enclosed with extraction For CBN and corundum grinding wheels Includes 2 borazon grinding wheels, 10 mm 02. Swaging machine Vollmer PMH Automatic swaging machine for bandsaw blades Max. blade thickness: 3.5 mm 03. Side/levelling machine Vollmer EMS Levelling machine for swaged bandsaw blades, converted to self-drive in combination with CAL 200, incl. limit switch at the saw blade clamping! Further details: The sharpening machines were purchased used in 2007 and have been stored covered on pallets/wooden constructions in a dry, heated garage. Due to the bandsaw never having been put into full operation, the installation of the sharpening room equipment was repeatedly postponed and as such, the machines are in the same condition as delivered. All operating manuals, descriptions, and wiring diagrams are neatly stored in a box. In 2018 and 2023, the machines were cleaned outside to remove surface dust, lightly oiled with graphite spray, and stored back in the garage. Immediately available – fully functional – in very good condition Location: Austria, near St. Pölten

Leto izdelave: 2014, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: 6151656290, Desoutter Cordless Angle Shut-off Screwdriver ELS15-480-A Ljdpfx Alocr H Eaocsrt Demonstration tool with 230 V charger + 2 batteries (18 V 2.6 Ah) No-load speed: 200 to 480 rpm Torque range: 5.0 to 15 Nm Drive: 3/8" square Length: 410 mm Weight without battery: 1.2 kg

Stanje: rabljeno, Leto izdelave: 2010, - Označba ločila na vrhu in na dnu - Rezalna žaga z motorjem 2,2 kW - Stroji za obdelavo robov z motorjem 8,0 kW - Dvojna rezalna glava z 2 motorja, vsak 4,5 kW - Enota za nanašanje lepila - Enota za obrezovanje - Enota za obdelavo robov - Multifunkcijska enota - Enota za obdelavo več profilov - Šobe za brizganje na vrhu in na dnu - Enota za obdelavo ravnih robov - Enota za glajenje - Enota za žlebove Dvostranski stroj za obdelavo robov Proizvajalec: IMA Tip: Combima/II/390/B/L12 Leto izdelave: 2010 Za vzdolžno in prečno obdelavo - 2 verigi za prenos z nizkimi zahtevami vzdrževanja s 75 mm širokimi in 85 mm dolgimi gumiranimi ploščami, z ekscentričnimi kamami - Razdalja 1080 mm. Pnevmatsko nastavljiva na višine 8, 16 ali 24 mm. Nadzorna enota ICOS OPEN - Največja širina obdelave 3.300 mm - Programsko nadzorovana nastavitev širine (master + slave) - Fiksna stranska vodila v smeri obdelave na levi strani Dimenzije obdelovanca - Najmanjša širina obdelave 244 mm (pri vzdolžni obdelavi) - Največja širina obdelovanca (razširitev verige) 1.300 mm - Najmanjša debelina obdelovanca 8 mm - Največja debelina obdelovanca 45 mm (z funkcijo kopiranja) / 60 mm (brez kopiranja) Material za obdelavo robov: - Najmanjša višina 14 mm, največja višina 65 mm - Valjčni material, najmanjša debelina 0,3 mm, največja debelina 3 mm Trakovi in letve: - Najmanjša debelina 0,8 mm, največja debelina 12 mm Hitrost podajanja - 10 - 50 m/min, z pogonom, ki je krmiljen s frekvenco. Naprava za podajanje - s 5 nagnjenih in gnanim valjev, ki delujejo od zgoraj. Osrednja opora z valjčno potjo - samodejno se spušča in samodejno centririra. Na vsaki strani opremljeno z: Označba ločila na vrhu in na dnu Rezalna žaga z motorjem 2,2 kW, 100 Hz, 6.000 vrt/min, pnevmatsko nadzorovana. - Elektronsko pozicioniranje za neprekinjeno horizontalno nastavitev. - Vertikalna nastavitev ročno z mehanskim prikazom. Stroj za obdelavo robov z motorjem 8,0 kW, 100 Hz, 6.000 vrt/min. - Elektronsko pozicioniranje za neprekinjeno horizontalno nastavitev. Ljdpfx Ajzuyqielcjrt Dvojna rezalna glava z 2 motorja, vsak 4,5 kW, 150 Hz, 9.000 vrt/min. - Elektronsko pozicioniranje za neprekinjeno horizontalno nastavitev. - Vertikalna nastavitev ročno z mehanskim prikazom. Enota za nanašanje lepila za vročo lepilo - Z enojnimi valji/magazinom za letve za valjčni material do 3 mm in letve do 12 mm - 2-delni magazin za valjčni material do 3 mm (se lahko namesti na enojni magazin za valje) - Horizontalni nosilec valja Enota za obrezovanje - Montirana na zgornji prečni prečni žagi, z 2 motorja, vsak 660 W, 200 Hz - Pnevmatsko nagibanje 0 + 25 za raven in poševni obrez. - Samodejna nastavitev za poševni obrez pri dveh različnih debelinah robov (npr. 0,4 in 1,2 mm) ter za "preklop robov" pri kopiranju pri debelini roba 1,0 - 3,0 mm. Samodejna prilagoditev hitrosti podajanja 20+30 m/min. Enota za obdelavo robov 08.0555 - Z 2 motorja 1.850 W, 200 Hz, 12.000 vrt/min. Multifunkcijska enota 08.353 - NC nadzorovana z 2 motorja, z avtomatsko namestitvijo na 4 profile. Enota za obdelavo več profilov - z avtomatsko namestitvijo na 4 profile preko sistema nadzora s fiksno točko Šobe za brizganje na vrhu in na dnu - za nanašanje čistil Enota za obdelavo ravnih robov Enota za glajenje - Z 2 motorja, vsak 180 W, 50 Hz, 1400 vrt/min. 1 enota za žlebove - Z motorjem 4,5 kW, 150 Hz, 9.000 vrt/min. - Horizontalno in vertikalno ročno nastavljiva z mehanskim digitalnim prikazom - Pnevmatsko upravljanje - Ročno nagibanje 90 ICOS open -

Stanje: rabljeno, Povezovalna palica / zgornja povezovalna palica / spodnja povezovalna palica, ki se uporablja kot nadomestni del za Wurster & Dietz GXV 71 ali EWD zgornjo povezovalno palico. Lrodpfxezrx Etj Alcjt Tehnični podatki: - Skupna dolžina: približno 3.270 mm - D1: 190 mm - D2: 150 mm - Debelina materiala: 50 mm - Razdalja med osmi: približno 3.020 mm

Stanje: rabljeno, Electric dual screwdriver unit with automatic feed and pneumatic double-stroke mounted on handling device, handling system, manipulator for screwdriving technology Screwdriving unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double-stroke via Festo valves and cylinders. Additionally, various monitoring devices are installed for full automation. Screwdriver 1 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Direct drive Screwdriver 2 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Offset drive Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric Screwdriver Unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Lrsdefx Hyfepfx Alcot Weight: 0.8 kg Gear unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight output Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Max. payload: 14 kg Handyflex outreach: 250 to 650 mm Handyflex outreach expanded: max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable payload - Adjustable stop for limiting the radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Blue steel pallet as base plate not included Blue steel base plate is not part of the delivery.

Stanje: rabljeno, Electric dual screwdriving unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit features a pneumatic double stroke actuated via Festo valves and cylinders. Additionally, various monitoring devices are installed for complete automation. Technical data: Electric screwdriver torque: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Power consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Spacing between screwdriving tools: 73 mm - Equipped with a TORX Bit T27 or TP27 (presumably for M6 screws) - Requires a Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 each consist of the following components: Rexroth type Servo motor Rexroth type 0 Planetary gearbox Rexroth type 0 Encoder Rexroth type 0 Straight drive Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Power consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Rated torque: 12 Nm Lrodpfx Alohxvu Escet Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 – 34 N Tool holder: 1/4" square Max torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A 7 m motor connection cable is included. Overall dimensions (W x H x D): approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Namenjena uporaba: Gradbeništvo Lastna teža: 917 kg Dimenzije tovornega prostora: 231 x 119 x 181 cm Lodpfx Aljzylf Aocsrt Prostornina tovornega prostora: 3.000 l Serijska številka: DPX-31024 Za dodatne informacije se obrnite na ekipo DPX.

Stanje: rabljeno, Pneumatic screwdriver, air screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Selector switch for clockwise and counterclockwise rotation (rotary ring control) - Without automatic shut-off - Pneumatic control line Ø 4 mm - Air supply connection for screwdriver function min. Ø 10 mm - Aluminium bracket for handling device - Screw feed Ø 12 mm (internal diameter) Dimensions L x W x H: 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver Lrodpefgrrhofx Alcet

Stanje: rabljeno, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Lrjdpfx Alofgpfmocot Horizontal travel: 450 mm Vertical travel: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable along three axes (horizontal, vertical, rotatable) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 balancing units for vertical movement, CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Load capacity adjustable in increments - Constant tensile force Required space (L x W x H): 770 x 310 x 1200 mm Net weight: 19 kg Good condition

Stanje: novo, - samodejno podajanje vijakov - samodejni izklop gibanja lijaka preko regulacije vleke Lsdpsy Aiaxsfx Alcert - avtomatski izklop globine - pnevmatski pogon in upravljanje - pnevmatsko izmetavanje vijakov in zasilna zaustavitev - nožno upravljanje - zaščitni okvir (varnostna naprava)

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), 1 unit radial fan with extension shaft and cooling disc, suitable for warm and dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Lodekvpfhspfx Alcort Airflow: 71,060 m³/h Pressure increase: 1,673 Pascal at 250°C (0.637 kg/m³) Speed: 1,460 rpm Shaft power: 40.5 kW Weight: kg Year of manufacture: 2007 Insulation with mineral wool and galvanized sheet metal. Dimensions: Length: 3,250 mm Width: 2,400 mm Height: 2,000 mm Inlet diameter: 750 / 980 mm Shaft height without spring buffer foot: Outlet dimensions: 980 x 780 mm Including compensator for outlet side. No damage or wear. Only the internal paint is affected by the heat.

Stanje: rabljeno, Handling device, JÄGER HANDLING handling system Manipulator for screwdriving technology Model: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Load capacity: 10 to 14 kg Reach: 250 to 550 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Moveable in three axes (horizontal, vertical, rotatable) - 1 piece TECHNA balancer for vertical movement, Type 9340, adjustment range 10 to 14 kg - Adjustable detent pawl for vertical movement, manual release via Bowden cable Lrjdpfxsfx Hxzj Alcst - For suspension of small devices in a weightless state - Adjustable load capacity - Constant traction force Required space (L x W x H): 880 x 500 x 1120 mm Net weight: 23 kg Good condition

Stanje: dober (rabljeno), prevoženi kilometri: 170.489 km, moč: 368 kW (500,34 KM), prva registracija: 10/2024, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 4x2, gorivo: dizel, zavore: retarder, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, dovoljena osna obremenitev (os 1): 7.500 kg, dovoljena osna obremenitev (os 2): 11.500 kg, Leto izdelave: 2024, Oprema: AdBlue, Bluetooth, centralno zaklepanje, filter saj, hladilnik, klimatska naprava, parkirni grelec, retarder, tempomat, = Additional Options and Accessories = - Front work lights - Heated mirrors - High beam headlights - Enclosed cab - Cabin - Leather interior - Leather upholstery - Alloy wheels - Air suspension - Particulate filter - Sleeper cab - Side skirts - Sun visor Lredpfx Alezy Ekxocot - Auxiliary heater = Remarks = Scania 500S Highline 4x2 – New dashboard – Fully equipped – Retarder – Full air suspension – Leather MY (Model Year): KM: 170,489 VIN: YS2S4X20005758548 New dashboard Navigation system Retarder Leather LED Full air suspension PTO preparation = Further Information = Technical information No. of cylinders: 6 Transmission Transmission: Opti Cruise, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Alloy wheels; Max. axle load: 7,500 kg; Steering; Tire tread left: 60%; Tire tread right: 60% Rear axle: Tire size: 315/70R22.5; Twin tires; Alloy wheels; Max. axle load: 11,500 kg; Tire tread inner left: 60%; Tire tread outer left: 60%; Tire tread inner right: 60%; Tire tread outer right: 60% Weights Unladen weight: 8,413 kg Payload: 10,587 kg Gross vehicle weight: 19,000 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good

Stanje: rabljeno, Leto izdelave: 2013, x-Weg 635 mm y-Weg 510 mm z-Weg 460 mm Steuerung Sinumerik 840 D SL Siemens Drehzahlbereich - Hauptspindel 20 - 10.000 min/-1 Antriebsleistung - Hauptspindel 13 / 9 kW Werkzeugaufnahme SK 40 DIN 69871 Max. Drehmoment 83 / 57 Nm Spannkraft 8 kN Tischaufspannfläche 790 x 560 mm Anzahl der T-Nuten 4 + 1 T-Nuten - Abstand 100 mm T-Nuten - Breite 4x 14H12 / 1x 14H7 mm max. Tischbelastung 600 kg Tischhöhe über Boden 720 mm Abstand Spindelnase und Tisch 120 - 580 mm Anzahl der Werkzeugplätze 30 pos. Max. Werkzeugbreite 80 / (130) mm max. Werkzeuglänge 250 mm max. Werkzeuggewicht 6 kg max. Gesamtgewicht 80 kg Wechselzeit Werkzeug - Werkzeug 1,6 sec Wechselzeit Span - Span 6,0 sec Lrodpsym Dz Rsfx Alcet Eilgang 30 m/min Vorschubgeschwindigkeit 1 - 20.000 mm/min Vorschubkraft max. 5 kN Gesamtleistungsbedarf 28 kVA Maschinengewicht ca. 3,8 t Raumbedarf ca. 3,5 x 4,0 x 2,7 m CNC - Bearbeitungszentrum Vertikal DECKEL MAHO - DMC 635 V New Design - ShopMill - OHNE Lochplatte - OHNE Spannmittel - OHNE Werkzeuge

Stanje: rabljeno, Leto izdelave: 2011, x-way 835 mm y-way 510 mm Lrodpex R Em Defx Alcjt z-way 510 mm Distance spindle nose to table 120 - 630 mm Control iTNC 530 ERGOLine Heidenhain Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 130 / 87 Nm Clamping surface of table 1,000 x 560 mm Max. table load 800 kg Number of T-slots 5 T-slots - width 14 mm T-slots - distance 100 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diam. with empty adjacent box 130 mm Max. tool length 250 mm Max. tool weight 6.0 kg Rapid traverse ( X / Y / Z ) 30 m/min Feed rate 1 - 20,000 mm/min Total power requirement 23 kVA Machine weight approx. 4.0 t Required space approx. 4.5 x 3.5 x 2.7 m CNC vertical machining centre DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Stanje: rabljeno, Vibratory Feeder with Pneumatic Screwdriving Stand Eco Line Vibratory feeder, sorting device, bowl feeder, vibrating bowl, automatic screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl inner height: 70 mm Sorting rail width: 10 mm Mains connection: 230 Volt, 50 Hz Operating pressure: 6 bar (for separation and screws) Valve control voltage (pneumatics): 24 Volt - Stepless vibration speed controller = stepless conveying speed - Vibrating bowl in protective housing - with pneumatic feeding system - Feed pulse via external electrical control - The feeder was used for supplying M5 x 12 mm screws - Some pneumatic hoses need replacing - Siemens S7-200 PLC CPU 224 MISSING Space requirement vibrating bowl L x W x H: 450 x 450 x 315 mm Weight vibrating bowl: 32 kg Screwdriving Stand WEBER Eco Line Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Ljdpfsxf Up Uex Alcjrt Screw holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screw guide diameter: Ø 37 mm Distance screw guide to table: 135 - 465 mm - 1 pc flat cylinder FESTO, type DZF-32-125-P-A-SM - 1 pc flat cylinder FESTO, type probably DZF-32-30-P-A-SM - Screw feed frame on linear guide - 3 position sensors on cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriving stand dimensions W x D x H: 200 x 410 x 1050 mm Weight screwdriving stand: 35 kg good condition Total weight vibrating feeder and screwdriving stand: 67 kg Note: The original Siemens S7-200 PLC CPU 224 is missing (see photo control cabinet without PLC), therefore, in this condition, no automatic sequence is possible. The controller also managed the sequence for screw separation and the screwdriver itself. The vibrating bowl is fully functional without the PLC, the integrated bowl controller does not require PLC control. Operation Principle: Fasteners are filled in bulk into the bowl and are conveyed upwards via mechanical vibration (micro-throw principle). The vibrating bowl is switched on or off automatically depending on the fill level of the screw magazine. The screw is then fed with compressed air through a plastic tube to the downstream device. The feed pulse for each screw comes externally from the downstream device.

Stanje: rabljeno, Leto izdelave: 2010, X-axis travel: 2,600 mm y-axis travel: 700 mm z-axis travel: 700 mm Control: Heidenhain iTNC 530 Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 35 / 25 kW Tool holder: SK 40 Clamping table surface: 2,900 x 700 mm Max. table load: 2,150 kg Number of tool stations: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with vacant adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 54 kVA Machine weight: approx. 14.4 t Required space: approx. 8.0 x 5.6 x 2.8 m CNC travelling column milling machine Lrodpov Dxxnofx Alcjt DECKEL MAHO – DMF 260 New Design - NC rotary table (A axis) - Operating hours: 18,709 spindle hours - Overhauled spindle installed (Dec 2023) - Z-axis counterbalance replaced (Feb 2023) - Production package - Option: tool clamping for pull studs - WITHOUT vises!

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 52.500 km, moč: 103 kW (140,04 KM), prva registracija: 07/2023, vrsta goriva: dizel, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, število prestav: 6, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2023, Število vrat: 5 Kabina: enojna Število valjev: 4 Prostornina motorja: 2.200 cc Tehnično stanje: zelo dobro Lrjdpfxsxb Rx Ro Alcst Vizualno stanje: zelo dobro Poškodbe: nobene Garancija: nobena

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Rabljeni stroj za polnjenje Pure-Pak Classic: Galdi RG270UCS, za linijsko oblikovanje, polnjenje in zapiranje kartonov tipa Gable Top. Pure-Pak Classic 70 X 95 s Crew pokrovčkom Leto izdelave 2015 Pure-Pak Classic Ultrazvočni aplikator vijačnih pokrovov upravljan s servomotorji, vključno z veliko rezervnimi deli. Stroj je bil v uporabi do leta 2021 in demontiran v 2. četrtletju 2021. Velikost kartona 70 x 95 mm, 1500ml Hitrost do 7000 kartonov na uro Polnjenje: volumska batna polnilka + Bottom up Dolžina 7715 mm Širina 1500 mm Višina 3655 mm Dodatne tehnične podrobnosti so na voljo na zahtevo. Na voljo sta dva popolnoma enaka stroja. Lsdpfeiiyr Isx Alcert

Leto izdelave: 2006, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Predstavljamo avtomatsko linijo za vstavljanje predalnih vodil, sestavljeno iz treh strojev in robota (trenutno v proizvodnji): BLA - B41, letnik 2006/2007 (Švedska) BLA - B28, letnik 2006 (Švedska) vijačnik 3RL, letnik 2018 (Litva) robot TEHNIČNE SPECIFIKACIJE Vstavljanje predalnih vodil Montažni stroj BLA-B41 – pozicija 1 Prehodni montažni stroj z omejevalnikom za pozicioniranje, namenjen za avtomatsko vijačenje predalnih vodil. Stroj je primeren za naslednje dimenzije materiala: Globina: 300–600 mm, servo-krmiljena nastavitev Višina: 400–1500 mm, servo-krmiljena nastavitev Debelina: 16 mm Dimenzije Dolžina stroja: 4100 mm Prehodna višina: 900 mm Vijačna oprema Vijačni nosilci, 2 kom., vsak opremljen z 2 vijačnikoma in ustreznim podajalnikom vijakov za vijake Ø6,3x13. Ustrezen vijak: tip 84 FSX Magazinske enote 2 magazinski enoti za leva predalna vodila 2 magazinski enoti za desna predalna vodila Vsak magazin vsebuje približno 40 predalnih vodil. Dolžina vodila: 450 mm, širina: 21,5 mm. Vmesni transportni trak TPB – pozicija 2 Poganjani valjčni transporter Skupna dolžina: 2150 mm Ostale značilnosti enake kot za poz. 3. Vmesni transportni trak TPB – pozicija 3 Poganjani valjčni transporter Skupna dolžina: 2450 mm Dolžina valja: 600 mm (620 mm v okviru transporterja) Razmik med valji: 150 mm Lrsdsy T Nfispfx Alcet Tip valja: Ø50 mm jeklo, prevlečeno s termoplastično gumo Hitrost: 0,78 m/s pri 50 Hz (frekvenčno krmiljeno) Višina: 900 mm Povratni transportni sistem TPT-US – pozicija 4 Stranski del s štirimi trakovi Hitrost: 0,5 m/s pri 50 Hz (frekvenčno krmiljeno) Poganjani valjčni transporter Skupna dolžina: 8900 mm Dolžina valja: 600 mm (620 mm v okviru transporterja) Razmik med valji: 150 mm Tip valja: Ø50 mm jeklo, prevlečeno s termoplastično gumo Hitrost: 0,5 m/s pri 50 Hz Višina: 900 mm Dodatne značilnosti Zvočni tlak: manj kot 70 dB(A) Električni priključki: Po načrtih električne napeljave Pnevmatski priključki: 0,63 MPa (6,3 bar), ½”