Etiketirni Stroj nakup rabljenega (27.854)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Hjdpfev Tb Hgjx Afaop Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Hsdper A Eq Refx Afaep Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Hsdpfx Afedcdwbeaop Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar Hodpod Supgofx Afasp - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Hedpfx Afec Tmygjaop Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: Hedpfx Afjhy Tlrsaop - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Hjdpjc S Di Rofx Afaop Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: zelo dobro (rabljeno), Edge cutting device Hjdpewiwnqofx Afaop Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Hodpfjlc Ewisx Afaep Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Hjdpfxeiiynns Afaep Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Hodpfx Afot Dx U Ssajp Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Hedpfxobahd Ee Afaop Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Hodpsfbr S Rjfx Afasp Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: Hsdpfx Aeg Nn E Njfaep • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Hodpfeuxqzujx Afajp Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Hsdpfett Da Djx Afaep Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Hjdpfx Afsv Hm Nmjasp Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: zelo dobro (rabljeno), Strapping Machine SIVORON / GIGANT Model S 669 L - Integrated strap spool - Strap width: 6 / 9 / 12 / 15.5 mm - Electrical connection: 230 V, 50 Hz - Adjustable strap tension - Heat-sealing system - Idle rollers in worktable - Mobile with swivel castors Dimensions (L x W x H): 1460 x 600 x 1600 mm Weight: approx. 70 kg Note on used machines: • Technical details and interim sale subject to change and errors excepted. • All prices quoted are ex works – loading free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Hodpfx Afeuxm Haeaep Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, For sale is a used FELDER combination circular saw and spindle moulder KF-500P with a cutting length of 2000 mm. The machine is in good condition and has been refurbished and inspected by our technical staff. (Fully functional) Technical specifications: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2000 mm - Extension table 1300 mm with crosscut fence 2600 mm Hodpswkrakefx Afasp - Cutting width 800 mm with full table support - 4 spindle speeds: 3000/6000/8000/10000 rpm - Spindle fence 240 mm with multi-setting system - 2 motors, each 5.5 HP (4 kW) The combination saw and spindle moulder is located in A-8561 Söding and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: circular saw, spindle moulder, milling machine, combination machine Reference: R-D1618-22

Stanje: novo, Leto izdelave: 2025, Laserska moč: 6000W / 12000W / 20000W Primeren material: kovina Stanje: novo Tip laserja: vlakenski laser (fiber laser) Delovna površina: 3000 x 1500 mm Hitrost rezanja: 200 m/min Podprti grafični formati: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Način hlajenja: vodno hlajenje Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: IPG/MAX Teža: 11.000 kg Hedog I H Ikopfx Afaop Garancija: 3 leta Napajanje: 110V / 220V / 380V 50Hz/60Hz 1. Flagship serija Izjemno dinamičen odziv, enostavno obvladuje kompleksne vzorce na pločevini. 2. Samodejno iskanje robov Funkcija prepoznavanja nepravilnih pločevin, čas iskanja robov je skrajšan na 3 sekunde. 3. Samodejni menjalnik šob Stroj zamenja šobo v le 35 sekundah, kar pomeni do 50 % prihranek časa.

Stanje: rabljeno, Leto izdelave: 2004, Double-end profiler and rebating automatic machine for window and door production Working width: 4000 mm 3 units on each side 1 x saw/chipper 2 x milling spindles - spindle stroke 800 mm! Rebating automatic machine with 16 spindles NC-controlled Many spare parts included Further specifications available upon request Hjdpfjdfx Hcex Afajp Note on used machinery: • Errors in technical specifications and intermediate sale reserved. • Stated prices are ex-works, loaded free onto truck. • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 2 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1607060840, skupna širina: 1.300 mm, skupna dolžina: 3.300 mm, skupna višina: 1.780 mm, vrsta vhodnega toka: Enosmerni tok, skupna masa: 750 kg, raven hrupa: 85 dB, OPIS Industrijski vezilni stroj Rigo by Ricoma CHT-1206 je idealna rešitev za podjetja vseh velikosti. S pomočjo serije CHT boste povečali proizvodnjo vezenja na končane izdelke vključno s kapami, ravnimi izdelki, jaknami in ostalo. Stroj ima 10.4-inčni HD LCD zaslon na dotik, 150 W servo motor (najnižja poraba energije v industriji), samodejni odrez sukanca, zaznavanje pretrganja sukanca, itd. Je izjemno zanesljiv mehanski in elektronski vezilni stroj s šestimi (6) glavami za vezenje, vsaka z 12 barvami. Stroji Ricoma vključujejo najsodobnejšo mehansko in elektronsko tehnologijo. Ima lasten operacijski sistem z intuitivnim vmesnikom, ki omogoča spreminjanje vzorcev vezenja na kraju samem in urejanje številk in črk neposredno v programski opremi stroja, ne da bi jih bilo treba urejati in obdelovati v računalniku, s čimer se odpravlja potreba po dodatni programski opremi, kjer je zaželeno vezenje besedil, in s tem poveča produktivnost dela. Vzorce vezenja je mogoče enostavno naložiti prek USB vhoda neposredno s ključka, neposredno na stroj, ki bere formata DST in DSB. Ima 26,5 cm LCD zaslon z enostavnim za uporabo in intuitivnim zaslonom na dotik. Ima tih motor pod 85 dB z nizkimi vibracijami. FUNKCIONALNE ZNAČILNOSTI 6 vezeninskih glav z 12 iglami razdalja med glavami 40 cm največja površina vezenja 40x45 cm (opcijsko 50x45 cm) ojačan okvir v primerjavi z drugimi modeli za zmanjšanje vibracij dvojni jermenski prenosni sistem samodejno odrezovanje niti največja hitrost šivanja 1000 šivov na minuto LCD zaslon, ki prikazuje izvajanje modela v realnem času in omogoča njegovo obdelavo neposredno na stroju okvir za vezenje s kotom 270 stopinj USB vhod samodejna menjava barve samodejno zaznavanje pretrganja ali prekinitve niti predhodno modeliranje modela za vezenje stroj lahko v pomnilnik shrani skupno 50 milijonov šivov (vsak model je lahko sestavljen iz 100 tisoč šivov) gumb za zaustavitev v sili večjezični meni servo motor pri 230V/50Hz z nizko porabo energije med 150-400 W/h samodejna vrnitev na izhodiščno točko po vsakem vezenju samodejno testiranje različnih komponent vezenine za ugotavljanje težav enostavno vzdrževanje, ki ga je mogoče opravi se z minimalnim usposabljanjem, tudi s strani upravljavca delovni prostor dvojno osvetljen lahko se poveže z omrežjem ali internetom zaščiteno z geslom pred nepooblaščeno uporabo VKLJUČENI DODATKI 12 okroglih obročev po 9 cm 12 okroglih obročev po 12 cm 12 okroglih obročev po 15 cm 12 okroglih obročev po 20 cm 12 kvadratnih obročev po 29 x 29 cm 1 okvir z ravno površino 12 obročev za kape 6 obročev za kape škatla za orodje in navijalec LASTNOSTI Hsdpfeym Typox Afaep Število igel: 12 Število glav: 6 Območje vezenja: 400 x 450 mm Interval glave: 400 mm Dimenzije stroja: 3300 x 1300 x 1780 mm Teža stroja: 750 kg Stroj je resnično kot nov, skoraj neuporabljen. Razlog prodaje, neizkušnje v vezenju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, COURSE ROOM MACHINE Hsdpjrtqi Ijfx Afajp For sale is a used Hager HDG 250 woodturning lathe with a center height of 250 mm. The machine was in use in our in-house turning courses, is in very good condition, and has been refurbished and inspected by our qualified personnel. (Fully operational) Technical data: - Center height: 250 mm - Distance between centers: 1,000 mm - Spindle thread: M33 x 3.5 with MK3 taper and ASR (Euro) anti-rotation groove - Spindle bore (diameter): 20 mm - Tailstock quill: 150 mm / MK3 - Tool rest (top): 300 mm - Weight: 270 kg - Dimensions (L x W): 1,800 x 640 mm - Motor: 2.2 kW (3 HP) - Speed range: 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! If you are interested in this machine, please include your complete address details in the contact form so that we can process your inquiry seriously. Thank you! Best regards, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, woodturning, turning, turning tools, wood turning, machine Reference: DH25500-K

Stanje: kot nova (razstavni stroj),

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno),