Stroj za oblaganje robov

Felder G360

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. Iajdpfxemhhf Sj Abxsu When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, - PVC Primus, 3 mm PVC kasetni sistem - Lepljenje, porezovanje poravnano, poravnalno rezkanje, posnetje robov, radijsko rezkanje - Strgalo, polirni agregat - Dimenzije: 4700 x 1400 x 1650 mm Iajdpfjwv Uq Aex Abxju - Teža: 1300 kg - Delovne dimenzije: Dolžina 4500 mm Globina 1020 mm Višina 1630 mm - Priključni nastavek: 140 mm Ø - Širina obdelovanca: min. 60 mm - Pomikalna hitrost: 11 m/min - 6 bar - 400 voltov, stisnjen zrak - Debelina robnega traku 8 mm pri trakastem materialu, 2 mm pri kolutnem materialu - BREZ predrezkalnega agregata - Pnevmatski cilindri novi Pošljemo po dogovoru za doplačilo! Zaradi starosti rabljene stroja je pri prodaji poslovnim kupcem izključena garancija.

Stanje: rabljeno, Leto izdelave: 2003, Rabljeni stroj Leto izdelave: 2003 Oprema in tehnični podatki: - Krmiljenje MAGELIS Iodpfx Abjxymfwsxoau - Za vroče lepilo na osnovi EVA - Lepljenje: 2x1,5 kW, u=12000, 200 Hz - Prirezovanje: 2x0,2 kW, avtomatski zasuk 0°/3°, 2 HM žagini listi 140 mm - Poravnalno rezkanje: 2,07 kW, z WPL glavami HF 70, premer 70 mm - Rezkanje radija: R2 - Radijska strgala - Površinska strgala - Zgornji lepilni bazen - Mere obdelovanca: - Minimalna širina: 70 mm - Debelina: 8-42 mm - Minimalna dolžina: 150 mm - Debelina roba: 0,2-6 mm - Podajalna hitrost: 12 m/min - Priključek za odsesavanje: 160 mm Dimenzije: 4.500 x 1.250 x 1.300 mm Teža: 1.650 kg Razpoložljivost: takoj Skladiščna lokacija: Baden-Württemberg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Tip: Tempora 60.06, F600 Leto izdelave: 2019 Iaedpfxexix Hxs Abxju Popolnoma avtomatsko upravljanje iz nadzorne plošče. Enota za spajanje: Da Enota za odrezovanje: Da Enota za rezkanje radijev: Da Rezilo za vlečenje radijev: Da

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support Iaodpfx Abemkixwoxju - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: dober (rabljeno), Koda: 0134 Znamka: BRANDT - NEMČIJA Model: KTD 53 Avtomatski robilepilni stroj za obdelavo lesa, PVC, furnirja, pohištva, izdelave pohištva po meri ter mizarske dejavnosti in drugo. Iasdpfx Abewq Sc Soxsu Tehnični podatki: Minimalna/maksimalna višina obdelovanca: 10/40 mm Debelina robnega traku min/maks: 0,4 - 1,5 mm Hitrost podajanja: 7 m/min na motoriziranem valjčnem transporterju Minimalna širina obdelovanca: 65 mm Sestava: Enota za lepljenje Enota za striženje/odrezovanje traku Enota za čelno odrezovanje Enota za zgornjo/spodnjo obrezovanje Kolesa na podstavku za enostavno premikanje Napetost: 380/50 V Skupna moč: 4,5 kW Delovni tlak: 6 bar Dimenzije (DxŠxV): 1800 x 615 x 1170 mm Teža: 280 kg

Leto izdelave: 2021, stanje: novo, Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex works, loading included! 1 racking unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! You can also build longer or shorter racking units by omitting or purchasing additional frames (or by changing the bay spacing); this example with 4 frames is simply the standard racking solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized IPE 160 / 100 profile with 2x3 adjustable arms of 1.20 m length per upright, 750kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, with 3 height-adjustable arms per side Load capacity at load center 600 mm: 750kg per arm / 2,250kg per upright side With horizontal and diagonal bracing, bay spacing e = 1300 mm; standard is 1.30m Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m an additional surcharge applies to the listed price! Special measurements (other bay spacings) are available upon request, incurring a surcharge and longer delivery time as they need to be custom manufactured! If no different bay spacing is specified, we supply the racking with a bay spacing of 1.30m. Iaedpfofivhfjx Abxsu In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipped within Germany directly by Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types etc.) available! Please contact us!

Stanje: novo, Koda: N0235 Blagovna znamka: CASADEI INDUSTRIA Model: E 350 PM Avtomatski robni lepilni stroj s lepilnim lončkom za vroče taljenje (EVA), verižnim podajanjem plošč in predrezkarjenjem Maksimalna kakovost obdelave Iedpfxoyvt Exs Abxeau - Verižni podajalni sistem - Predrezkanje (E350PM) - 3 prosti prostori za končne enote Visoka zmogljivost - Hitrost podajanja 7 m/min - Višina plošče 45 mm - 2 mm robni trakovi Minimalna zasedenost prostora - Dolžina 2,30 m Enostavna uporaba - Nastavitve enot s kosom roba - Preprosta in intuitivna uporaba stroja 3-položajna vodilna ograja pri vhodu - 0-1-2 mm (glede na debelino roba) Verižni transport plošč - Zanesljiv oprijem plošče zagotovljen s posebnimi nedrsečimi gumijastimi blazinicami. - Linearno podajanje omogočeno z dvojnimi drsnimi vodili s posebno geometrijo profila, natančno obdelano do stotinke milimetra. - Dolgotrajno monolitno ogrodje, popolnoma obdelano v enem ciklu na CNC-obdelovalnem centru. Pritiskalna letva z zapornimi ročicami - Zgornja pritiskalna letva z dvojnim zaporedjem gumijastih koles na ležajih, z zapornimi ročicami in indikatorjem položaja Predrezkarjenje - NEVIDNA LINIJA LEPLJENJA - DIAMANTNA orodja Ø= 60 mm H= 54 mm - HF motorji 200 Hz – 12.000 obr/min – 0,75 kW (vsak) - Namenski odsesovalni sistem in pihalnik za čiščenje plošče pred lepljenjem Lepilna enota - POPOLNO LEPLJENJE, HITRE IN PRAKTIČNE NASTAVITVE - 6 grelnih elementov za enakomerno temperaturo lepila - Motoriziran lepilni valj z notranjim električnim grelnim elementom - Spodnji teflonsko prevlečeni lepilni lonček za popolno in hitro čiščenje Pnevmatske škarje, pritisni valji, sistem podajanja roba - PODROBNOSTI, KI ODVISUJEJO - Podajanje roba je sinhronizirano z obdelovano ploščo - Nihajno gibanje rezalne škarjaste enote za popolno lepljenje - Hitro in natančno pozicioniranje pritiskalnih valjev - Sistem "prebere" debelino roba, kar onemogoča napake! Obrezovanje koncev - UČINKOVITOST IN VSESTRANSKOST - Odrez presežka roba spredaj in zadaj - Delovni cikel nadzorovan s PLC-jem - Možnost izklopa iz nadzorne plošče (PLC) Poravnalna rezkalna enota - Poravnalna rezkalna enota s standardnimi navpičnimi disk-kopirji - Možnost obdelave za robove med 0,4 in 2 mm Anti-adhezivna/pršna enota za ločevalni sredstvo (opcijsko) - TRENUTNO POPOLNO ČIŠČENJE - Pršilna funkcija nadzorovana s PLC-jem - 2 pršilnika (spodnji in zgornji) in rezervoar za tekočino Infrardeča svetilka (opcijsko) - ZA NAJBOLJŠE POGOJE LEPLJENJA - Ustvari optimalne pogoje za popolno lepljenje - Segreva plošče in odstranjuje vse sledi vlage.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, skupna širina: 80 mm, skupna dolžina: 1.600 mm, prosta razpetina: 30 mm, Konzolne regale – Idealna rešitev za shranjevanje dolgih in težkih izdelkov Konzolni regali so posebej zasnovani za učinkovito shranjevanje obsežnih in težkih izdelkov, kot so cevi, les, kovinski profili, prevelike palete in drugi nepravilno oblikovani materiali. Ključne značilnosti: • Robustna konstrukcija • Nastavljive roke za maksimalno prilagodljivost shranjevanja • Enostaven dostop in optimalna organizacija blaga • Primerno za težke tovore in izdelke večjih dimenzij • Modularna zasnova, enostavno razširljiva glede na potrebe skladišča Prednosti: • Maksimalno izrabljen horizontalni skladiščni prostor • Zmanjšan čas manipulacije • Povečana varnost in učinkovitost pri skladiščenju Isdpfew S Ttysx Abxeau Idealno za industrijska skladišča, delavnice, tovarne in logistične centre. Cena se razlikuje glede na model in velikost!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1979, Raimann saw height: 90 mm, chain width: 250 mm. After overhaul: machine has undergone a complete refurbishment. Motor: 22 kW. Cutting width: 250 mm. Shaft diameter: 80 mm. Drive from main motor to shaft via flat belt. Iaodpfxeh Rv Eys Abxeu