Dvonožni Mostni Žerjav 50T Demag nakup rabljenega (2.121)

Stanje: dober (rabljeno), Leto izdelave: 1996, Motor za lahki mostni žerjav. Premik kavlja: 3 m Bedpfxoy Urlnj Acmjlh Nosilnost: 0,4 t Širina: cca 500 mm Višina: cca 300 mm Globina: cca 300 mm Teža: cca 25 kg Stanje: dobro, rabljeno

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18615 Manufacturer: DEMAG Model: IntElect 80/370-100 NC4 All Electric Year of manufacture: 2007 Clamping Unit Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4750 kg Additional Information: A technology that sets standards in energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced full-electric drive technology to the plastics injection molding industry in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is activated only when a movement is actually required. This fundamental difference allows for 50 – 70% energy savings compared to hydraulic machines and significantly reduces annual operating costs. Motor System — Siemens MOTICS 3 Main drive motor · Water-cooled servo motor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · Water-cooled servo motor This motor, based on the same Siemens MOTICS 3 platform, ensures homogeneous plasticizing of the material through precise speed and torque control; the water-cooled design ensures stable operation even during intensive, long-term production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw return, ejector, and plasticizing are all fully servo-driven. As each axis can be programmed independently, all movements can be executed simultaneously. This architecture offers micrometer-accurate repeatability, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. Bledsza Dc Uopfx Acmsh NC4 Control System The keypad-based NC4 system manages all machine parameters — including injection profile, mold protection, and cycle analysis — from a single screen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2,020 bar Injection volume: 231 cc Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Bljdpfey Smkmjx Acmsh Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runner support Hardened injection unit – bimetallic Built-in printer Option to change screw diameter Dimensions: Weight: 4,100 kg Length/Width/Height: 4.10x1.40x1.90 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Sumitomo Demag IntElekt 50/370-200 / Elektromos fröccsöntő gép Gyártási év: 2009 Fröccsegység: Csigaátmérő: 35 mm Fröccstömeg: 128 g Fröccsnyomás: 1466 bar Adagolótérfogat: 144 cm³ Záróegység: Záróerő: 50 t Oszloptávolság: 370x370 mm Felfogólap méret: 520x570 mm Kidobó: elektromos Zárórendszer: könyökkaros Vezérlés: NC5 - Érintőképernyő További felszereltség: Elektromos gép: nagy fordulatszámú, energiatakarékos és nagyon csendes Euromap 67 Robot interfész Légszelep x 4 Forrócsatorna vezérlés Edzett (bimetál) fröccsegység Központi kenés A csigaátmérő cseréje lehetséges Méretek: Tömeg: 4750 kg Hossz/szélesség/magasság: 4,20x1,26x1,84 m Meghajtás: Fűtőteljesítmény: 5,7 kW Minden eladásra kínált gépet szerviztechnikusaink indítanak el értékesítés előtt. Lehetőség van videót kapni a kiválasztott gép műszaki tesztjéről, vagy részt venni élő technikai teszten łódzi telephelyünkön. Bodpfx Asy Smkgscmjlh Ár: Kérésre

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Clamping Unit: Clamping force: 25 t Blsdpjy Smivefx Acmoh Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Blodpfxoy Sl Ane Acmeh Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Blsdpfjy Sl Ahox Acmsh Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Metering volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet operation Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Main drive motor – servomotor driven with inverter – energy saving Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Robot with adapter, protective enclosure Robot available for additional price Dimensions: Weight: 4,400 kg Blodpfsy Slzwjx Acmoh Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you may participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stanje: rabljeno, Leto izdelave: 2006, Nosilnost 500 kg Doseg 5.000 mm Osnovna plošča 0,7 x 0,7 m Bedpfxju Hq Rrj Acmjlh Potreben prostor pribl. 5,14 x 0,70 x 4,75 m Kranjska naprava DEMAG - DC-Pro 5 - 500 H5 V1

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 17.577 h, vpenjalna sila: 1.600 kN, skupna višina: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection molding machine known for its precision and efficiency. If you are in the market for a high-quality injection molding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart, which we are offering for sale. Contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Advantages Technical Machine Specifications • Clamping unit: 160 / clamping force: 1760 kN / max. opening stroke: 495 mm / minimum mold height: 275 mm / maximum mold height: 585 mm • Distance between platens, max.: 1080 mm / platen size (H x V): 760 x 785 mm / tie bar spacing (H x V): 520 x 520 mm • Ejector stroke: 125 mm / ejector force: 35 kN • Injection unit: 340 / screw diameter: 35 mm / L/D ratio: 20 / injection volume (PS), without accumulator: 288 cm³/s • Metering stroke: 162 mm / max. nozzle stroke: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact force: 30 kN • Material hopper capacity: 35 l / max. injection speed, standard: 300 mm/s / max. injection speed, increased: 500 mm/s • Net weight without oil: 7300 kg Bledpfx Acsx D Hnmsmeh Additional Information Electrical and pneumatic interfaces: - Sockets: - 2 x Schuko (1Ph, 230V, 10A) - 2 x IECEE (3Ph, 400V, 16A) – switchable via main switch - Additional Schuko socket also available (same specification) - Valves: - 1 x pneumatic 5/2 valve on moving platen (programmable) - 2 x pneumatic 5/2 valves on stationary platen (programmable) - I/O: - 3 digital inputs / 3 digital outputs (freely programmable) - Terminal strip outside the control cabinet Air & Cooling: - Central air supply and piping - Cooling system: open circuit - Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) - Separate water inlet for cooling (mold + machine) - Mold cooling shutoff (time programmable) Mechanical Features & Movement: - Clamping and injection unit colors: - Jet black (RAL9005): bed, pump station, lower control cabinet - Signal white (RAL9003): clamping unit, injection unit, safety covers, guards, safety doors - Platen layout: E standard (similar to EUROMAP, March 1996) - No side ejector plate - Ejector: held in front position by spring-loaded mold ejector - Standard mold height - Standard closing speed - Active movements only when guard is closed - Screw: wear-resistant nitrided cylinder, standard L:D, 35 mm diameter - Non-return valve: 3-piece, ring-shaped Control, Programming & Monitoring: - Inputs/outputs and sequence freely programmable - Switch programs (e.g., dry run, start-up scrap counter, timed cooling) - Injection process: - Injection force at max. injection speed: 200 mm/s - Back pressure programmable via 6-point polygon - Hold pressure switchover depending on melt pressure - Post-injection, back pressure, dosing: closed-loop control - Feed throat temperature control: closed-loop, max. 90°C ±9°C - Reduced nozzle closure force (programmable) - Clamping force: closed-loop controlled

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 67.553 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 500 kN, premer vijaka: 30 mm, razmak između stupova: 355 mm, delovna prostornina: 106 cm³, injekcijska masa: 96 g, minimalna višina orodja: 210 mm, odmični hod: 400 mm, širina plošče: 480 mm, višina plošče: 480 mm, vgradna višina: 400 mm, ogrevalna zmogljivost: 8,3 kW (11,28 KM), moč: 11 kW (14,96 KM), Stroj DEMAG Ergotech Extra 50-200 z rokovalnim robotom SEPRO Axess S3. Pripravljen za proizvodnjo in na voljo za ogled kadarkoli. 2 pnevmatski kaskadi, 1 izvlek jedra AS, 6 integriranih ogrevalnih con. Bedpfx Aex Ex R Escmjlh

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 500 kN, Demag Systec 50/370-120 (2008) Bedpfey Eyq Hjx Acmelh

Stanje: novo, DEMAG rezervni deli: 1. Oddajnik / tiskanina DRC - DR D3 2. Obremenitveni zatič DMR 20 3. Transceiver CAN Safety 4. Zavorny obroč / koničen KB 160 B - 2 kosa 5. Zavorny obroč / koničen KB 100 B - 2 kosa 6. Sklopka set 7. Zavorni disk 13KF - 3 kosi 8. Dvižna očesa DK 20 - 2 kosa 9. Set nosilca navora MA 125-1 - 2 kosa 10. Magnetno jedro za zavoro B140 - 1 kos + B050 - 2 kosa Bjdpjwug Nuofx Acmolh 11. Žična vrv, premer 16 mm - 35 metrov 12. Žična vrv, premer 10 mm - 62,8 metra 13. Omejevalno stikalo z gonilom DGS 3

Stanje: novo, DEMAG zavorni obroč / zavorna obloga / stožčasta zavorna obloga – 50 kosov (novo). 1. Tip: KB 160 - 2 kosa. 2. Tip: KB 100 - 2 kosa. 3. Tip: KB 200 - 2 kosa. 4. Tip: KB 140 - 2 kosa. 5. Tip: KB 125 - 5 kosov. 6. Tip: KB 112 - 1 kos. 7. Tip: KB 90 - 2 kosa. 8. Tip: KB 80 - 11 kosov. 9. Tip: št. 405 - 1 kos. 10. Tip: št. 616 654 - 5 kosov. 11. Tip: št. 620 606 - 7 kosov. 12. Tip: št. 612 648 44 - 6 kosov. Bedpfx Aoyy Takocmjlh 13. Tip: št. 628 626 44 - 2 kosa. DEMAG zavorni pokrov / pokrov zavore - 38 kosov. Različne velikosti (novo / rabljeno).

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7143-1001, vpenjalna sila: 500 kN, premer vijaka: 30 mm, delovna prostornina: 106 cm³, tlak vbrizgavanja: 1.995 letvica, injekcijska masa: 94 g, odmični hod: 400 mm, vgradna višina: 210 mm, skupna dolžina: 4.000 mm, skupna širina: 1.400 mm, skupna višina: 2.100 mm, skupna masa: 3.400 kg, moč črpalke: 15 W, Please refer to the images and video for the condition and contents of the offer. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our website to view this and other available offers. The stated company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Bodpex Spw Aefx Acmolh Deviations from technical data or errors in the item description may occur and are reserved.

Stanje: rabljeno, Leto izdelave: 2003, (1) Stroj za brizganje plastike, Ravnanje: Sepro Robotique | Success 7 | 2016 Nadzor temperature: HB Therm | Razno: 1x Zaščitni ohišje Bodpfey N R U Rjx Acmelh 1x Transportni trak, podjetje RAU Maschinenbau 1x Regulator vročih kanalov 1x Transportni trak, podjetje SAS Grillet 1x Transportna enota, podjetje Motan Tehnične podrobnosti: Velikost stroja: 500/370-200 Napajanje: 3/N/PE AC 400 V Frekvenca (Hz): 50 Tok (A): 94 Teža (t): 3,3 Tlak (bar): 210 Pretok (l/min): 130

Stanje: rabljeno, Leto izdelave: 2000, (1) Brizgalni stroj, rokovanje: Wittmann | WX142-0325 | 2023 Razno: 1x zaščitni pokrov 1x rokovalni sistem, podjetje Wittmann, serija 9 1x transportni trak z možnostjo menjave zabojev 1x V2A drč za izmet 1x Euromap 12/67 predelava 1x zunanji sistem vročih kanalov, podjetje Mold Masters M1-06-12 (leto izdelave 2016), 12 con 1x transportna enota, podjetje Motan Bjdpfxsy N R Uqe Acmolh Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 196 Tok 2 (A): 110 Tok 3 (A): 86 Tok 4 (A): 67 Teža (t): 9,7 Tlak (bar): 190 Pretok (l/min): 190

Stanje: rabljeno, Leto izdelave: 2014, (1) Stroj za brizganje, Ravnanje: Sepro Robotique | Success 22 | 2016 Kontrola temperature: GWK Razno: 1x zaščitni pokrov 1x transportni trak, 1x transportna enota, podjetje Somos FG 204; leto izdelave 2022 Tehnične podrobnosti: Sila zapiranja (kN): 2100 Blodpfx Acjy N R R Eomjh Razmak veznih stebrov (mm): 580 Brizgalna enota: 430 Napajanje: 3/400 V Frekvenca (Hz): 50 Tok 1 (A): 175 Tok 2 (A): 116 Tok 3 (A): 59 Teža (t): 8,93 Tlak (bar): 190

Stanje: rabljeno, Leto izdelave: 2003, (1) Brizgalni stroj, Ravnanje: Wittmann | W621 | 2003 Nadzor temperature: HB Therm | HB-100 Z1 | 2013 Bjdoy N R Iqepfx Acmelh Razno: 1x Zaščitni ohišje 1x Transportni trak 1x Krmilnik vročih kanalov, podjetje Mold Masters, 1x Transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 189 Tok 2 (A): 152 Tok 3 (A): 37 Teža (t): 10,1 Tlak (bar): 190 Pretok (l/min): 206

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Clamping force: 2000 kN, holding force: 2200 kN, max. opening stroke: 570 mm, min. mould installation height: 310 mm, max. mould installation height: 660 mm, max. distance between platen faces: 1230 mm, platen dimensions: 830 x 830 mm, clear tie bar distance: 560 x 560 mm, max. mould weight: 3.3 t, max. weight on moving platen: 1.7 t, max. weight on fixed platen: 2.5 t, ejector stroke: 180 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 45 mm, L/D ratio: 20, injection pressure at 400°C: 2402 bar, shot volume: 358 cm³, shot weight (PS): 330 g, max. dosing stroke: 225 mm, max. nozzle stroke: 400 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 80 kN, installed cylinder heating: 13 kW, material hopper capacity: 70 l, oil tank capacity: 500 l, screw drive: 32 kW, clamping unit drive: 32 kW, pump unit power: 15 kW, total installed power: 92 kW, continuous sound pressure level: 74 dB(A), length: 5700 mm, width: 1700 mm, height: 2200 mm, weight: 11 t, SPS operating hours: 36,734 h, cylinder heating: 25,665 h, pump: 18,222 h, documentation available. An on-site inspection is possible. A Wittmann robot cell is optionally available. Bedpsy Tx Rbofx Acmelh

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Clamping force: 3000 kN, holding force: 3300 kN, max. opening stroke: 670 mm, min. mould installation height: 330 mm, max. mould installation height: 710 mm, max. distance between platen surfaces: 1380 mm, platen size: 1040 x 950 mm, clear column spacing: 720 x 650 mm, max. mould weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2426 bar, shot volume: 530 cm³, shot weight (PS): 480 g, max. dosing stroke: 270 mm, max. nozzle stroke: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed cylinder heating: 14.8 kW, material hopper volume: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric drive clamping unit: 37 kW, pump aggregate power: 22 kW, installed total power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6500 mm, width: 2000 mm, height: 2300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, cylinder heating: 35,656 h, pump: 27,922 h, documentation available. An on-site inspection is possible. Blsdpoy Tx Rnefx Acmjh

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18616 Manufacturer: DEMAG Bledszabkvjpfx Acmsh Type: IntElect 80/370-100 NC4 All Electric Year of manufacture: 2007 Clamping Unit Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4750 kg Additional Information: Technology that convinces in terms of energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced fully electric drive technology to the plastics injection molding sector in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is activated only when actual movement is required. This fundamental difference enables 50 – 70% energy savings compared to hydraulic machines and significantly reduces annual operating costs. Motor System — Siemens MOTICS 3 Main drive motor · water-cooled servomotor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · water-cooled servomotor This motor, also based on the Siemens MOTICS 3 platform, plasticizes the material with precise speed and torque control to achieve a homogeneous melt; the water-cooled design ensures stable operation during long-term, intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servomotors. Clamping, injection, screw retraction, ejector, and plasticizing are all fully servo-driven. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. NC4 Control System The button-based NC4 system manages all machine parameters—including injection profile, mold protection, and cycle analysis—from a single screen.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Hydraulic injection moulding machine from 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mould height of 1530 mm. It is equipped with a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking for a high-quality injection moulding machine, you should consider the DEMAG 420/810 - 2300 we are offering for sale. Please contact us for further details. • Tie bar distance (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mould height: 820 mm Bsdpfsy Nyflex Acmjlh • Max. mould height: 1530 mm • Max. daylight between platens: 1530 mm • Max. weight of the moving mould half: 2200 kg • Diameter/height of the centring ring: 160 × 15 • Sprue bush radius: R19 • Diameter of the ejector coupling thread: M24 • Shot volume: 1090 cm³ • Hot runner zones: 8 • Air cascade (quantity): 6 • Cascade hydraulics (quantity): 6 • Hydraulic core pulls: 2 • Oil fill capacity: 730 • Power supply: 217 A • Connected load: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech 80-310 Compact Blodpfewav Htox Acmsh Schließkraft: 80 Tonnen Baujahr: 1995 Holmenabstand: 400 x 400 mm Schneckendurchmesser: 40 mm Schussgewicht: 196 g

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 2.000 mm, nosilnost: 1.500 kg, Prodam vrtljiv žerjav z verižnim vitlom Demag, višina stebra je 286 cm, dolžina roke od vrtljivega čepa 320 cm. Bsdpfxeymv T Sj Acmslh