Stroj za brizganje

Demag Ergotech 50/370-200

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Nwjdpfergw Exex Ag Tjc Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Nedpfxjh Hbpws Ag Towc Model: TT-157E Available: 14 units

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller Nwsdpfxefnvvie Ag Tsc - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on Njdpfxofnvwqe Ag Tjwc - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, The used FANUC ALFA 1-iC wire EDM is a midsize, 5-axis CNC wire-cutting machine featuring immersion machining. Travel ranges: X 550, Y 370, Z 410 mm. Year of manufacture: 2004. CE certified. Complete with automatic wire threading, chiller, and opening roof. Technical Specifications – FANUC ROBOCUT ALPHA 1iC Wire EDM - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1,000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Axis travel X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X/Y/Z axes: 900 mm/min - Rapid traverse on U/V axes: 450 mm/min Nwjdpfjxd R Hmex Ag Toc - Table size (L x W): 780 x 600 mm - Maximum part dimensions (L x W x H): 820 x 730 x 300 mm - Maximum part weight: 1,000 kg - Maximum taper angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical connection: 400 V, 50/60 Hz - Total power requirement: 13 kW - Machine weight: 3,100 kg

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 250 t Screw diameter: 70 mm Tie bar spacing (vertical): 630 mm Nwedevbbvkopfx Ag Tec Tie bar spacing (horizontal): 630 mm Design: Horizontal Drive: Hydraulic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Number of axes: 3 X: 1500 mm Y: 2600 mm Z: 4000 mm Nwsdewnfmfjpfx Ag Tec + C-axis pneumatic Reach: 4000 mm Payload: 41 kg

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), A selection of used injection moulding machines is available. 1) Demag Concept 80/370-200, clamping force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, clamping force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, clamping force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100,000h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2006, operating hours: approx. 105,000h. 5) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 6) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 7) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 8) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 67,000h. 9) Engel VC 940/200 electric, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2007, operating hours: approx. 98,000h. 10) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 11) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2000. 12) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2001. 12) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2002. 13) Engel VC 940/200 electric, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107,000h. Documentation available. On-site inspection is possible. Sale of individual machines possible. Nwsdpfx Ajv R Ew Dsg Tjc

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno), The machine has been inspected by the manufacturer; of course, I can show you a WhatsApp video of it. The unit has very low operating hours for its age, as you can see in the corresponding photo. The repair invoice is available! - Water-cooled unit - Automatic refilling - Return flow preventer Nedpfx Asnl Ervog Towc - Frequency-controlled pump, up to 6 bar - Cooling water regulating valve, NEW - New refrigerant R134a - Fault indicator light - Cartridge filter Complete operation and management via PV is possible; thanks to its many options, this machine is worth your investment! Naturally, the technical specifications can also be provided upon request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 27.551 h, vpenjalna sila: 2.200 kN, skupna višina: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment • Sepro robot SDR 22 Machine Advantages Technical Machine Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max. shot volume: 329 cm³ / max. shot weight: 293 g / injection rate without accumulator: 254 cm³/s Njdpsx D Hnyofx Ag Tewc • Metering stroke: 207 mm / max. nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / max. injection speed: 160 mm/s • Clamping force: 2420 kN / max. opening stroke: 550 mm / min. mould height: 300 mm / max. mould height: 580 mm / max. platen distance: 1130 mm • Platen size (h x v): 880x830 mm / tie bar spacing (h x v): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Machine depth: 6460 mm