Dmg Mori Dmu 50 Evolution nakup rabljenega (35.966)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 111.111 mm, We offer you: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical Data: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travel paths: x1 axis: 675 mm y axis: +/- 150 mm z1 axis: 1,562 + 164 mm b axis: +/- 120° a axis: 1,542 mm x2 axis: 200 mm y2 axis: +/- 40 mm z2 axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Iodoy Sfx Nepfx Ableaw Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holding: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70 / Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed, driven tools: 12,000 rpm Tool holding: BMT40 Torque: 16.9 Nm Feed rates: x axis: 50 m/min y axis: 40 m/min z axis: 50 m/min a axis: 36 m/min x2 axis: 25 m/min y2 axis: 18 m/min z2 axis: 40 m/min b axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manufacturer SMW KNCS-N-400-128 incl. through-hole cylinder for main spindle − Hydraulic 3-jaw chuck, manufacturer SMW KNCS-N-260-78-3Z incl. through-hole cylinder for counter spindle − Foot switch for chuck actuation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (discharge to the right) − Coolant temperature control / coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at the chuck for main and counter spindle − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − High-pressure coolant system 70 bar, band filter system TMF300, tank 980 l − Manual tool presetting device for main and counter spindle − Direct measuring system on x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manufacturer Renishaw RMP600 − Universal filter − 3D quickSET − Cycle: alternating spindle speed − Cycle: "tailstock tip at turret" − Cycle: MPC – Machine Protection Control − Cycle: MVC – Machine Vibration Control − Synchronous thread cutting without compensation chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are subject to reservation!

Stanje: rabljeno, Leto izdelave: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Iedpfx Ajvy Ig Hsbleaw Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore (sub spindle): 43 mm C-axis (sub spindle): 0.001° X travel: 260 mm Z travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y-axis

Stanje: rabljeno, Leto izdelave: 2014, Max. turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Iodpou Hq Rlofx Abloaw Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Counter spindle nose: JIS A2-5 Counter spindle bearing diameter: 85 mm Counter spindle bore: 43 mm Max. usable bar diameter (counter spindle): (-) mm Chuck diameter (counter spindle): 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool interface: BMT 60 Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total connected load: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, x-travel 750 mm y-travel 210 mm z-travel 1150 + 100 mm Control Fanuc MSX-701III Maximum turning diameter: 660 mm Maximum turning length: 1498 mm Swing diameter over cross slide: max. 400 mm Spindle speed: 3000 rpm Tool magazine with 40 stations Turret with 10 positions Total connected load: 90 kVA Machine weight approx. 26.6 t Space required approx. 5301 x 2997 x 2788 mm Capacity: Swing diameter over cross slide (Tool spindle 1): 750 mm Swing diameter over cross slide (Turret 2): 400 mm Max. turning diameter (Tool spindle 1): 660 mm Max. turning diameter (Turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Axes travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120°, full B-axis 1° indexed and 0.0001° clamped X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (sub spindle): 1610 mm Rapid traverses: (X1, Z1) 50 m/min., (Y, X2, Z2, SZ) 30 m/min. Main and sub spindle: Infinitely variable spindle speeds (Spindle 1 + 2): 30-3000 rpm C-axis (Spindle 1 + 2): 0.001° Main spindle motor: 22/18.5 kW Sub spindle motor: 22/18.5 kW Torque (Spindle 1 + 2): 1000 Nm Disc turret: Number of tool stations: 10 Speed of driven tools: 6000 rpm Drive power: 5.5/3.7 kW Milling spindle: Tool holder: HSK A63 Max. speed: 12000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40 positions Tool diameter: 70/140 mm Tool length: 400 mm Tool weight: 8/10 kg Total connected load: 90 kVA Overall dimensions (L x W x H): 5301 x 2997 x 2788 mm Machine weight: 26.6 t Equipment/Accessories: Isdpfx Abey Spuusleaw - Upper milling spindle (B-axis), full 4th axis, positioning 0.0001° - 40-position tool magazine - Lower 10-position turret, all positions driven - 2 x 3-jaw quick change chuck KNCS-N 315/91 - KNOLL high-pressure coolant system, pressure selectable 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter unit - Chip conveyor - Blow-off system for main spindle chuck (M-function control) - Blow-off system for tool cutting edge (M-function control) - Coolant gun incl. accessories - Oil mist extraction - Direct measuring system for X1, X2, Y axis - Bar feeder interface - Dual foot switch for both spindles - Islands and pockets programming for MAPPS - High speed fixed cycle for MAPPS - Program memory extension to 8 MB - Program restart - 3-stage signal lamp - Memory card 512MB (CF Card) - Measuring arm (image) for tool measurement in machine - Tool holder + case, reduction sleeves, driven tools - Jaw set - Collet set

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 10.168 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL254120635, CNC stružnica Proizvajalec: DMG MORI Tip: NLX 2500 SY 700 z avtomatizacijo WH10 Leto izdelave: 2012 Premer struženja: 460 mm Dolžina struženja: 795 mm Krmiljenje: MORI SEIKI M730 BM Premer nad prečnim suportom: 590/360 mm Premer vretena: 80 mm Pomiki X/Z: 260/795 mm Skupna priključna moč: 40 kVA Iodpfx Asy Szwhjbleaw Teža stroja pribl.: 6,4 t Potrebni prostor pribl.: 3.994 x 3.056 x 2.187 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.808 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257181158, stružna dolžina: 705 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, premer nihanja nad prečnim premičnikom: 742 mm, premer nihanja nad prečno desko: 920 mm, New auction due to buyer default on payment! TECHNICAL DETAILS Working area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Maximum turning length: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inch Spindle bore: 91 mm Front bearing diameter: 140 mm Sub spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inch Iaedpszck Txofx Ablsw Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and axes Tool stations: 12 Tool shank cross-section: 25 mm Max. driven tool speed: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & weight Machine height: 2,000 mm Installation dimensions: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Sub spindle Main spindle with 10-inch chuck Sub spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.770 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL257181158, stružna dolžina: 705 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, premer nihanja nad prečnim premičnikom: 742 mm, premer nihanja nad prečno desko: 920 mm, TECHNICAL DETAILS Working Area Swing diameter over bed max.: 920 mm Swing diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Sub Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Tool shank cross-section: 25 mm Max. driven tool speed: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Iaodjy A Nf Ispfx Ablsw Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Installation dimensions: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,770 h Power-on hours: 10,820 h EQUIPMENT Y-axis Sub spindle Main spindle with 10-inch chuck Sub spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar feeder

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 5.500 h, Funkcionalnost: popolnoma funkcionalen, Steuerung SIEMENS 840D SL Shopturn Umlaufdurchmesser über Bett 580 mm Umlaufdurchmesser über Schlitten 320 mm Max. Drehdurchmesser 320 mm X Verfahrweg 242 mm Y Verfahrweg +/- 40 mm Z Verfahrweg 540 mm Abstand zwischen Spitzen 780 mm Eilgänge X/Z 30/36 m/min Iaodpfxjyr I A Ae Ablsw Eilgänge Y 22,5 m/min Drehzahl 5000 U/Min Spindelnase A2-6 Spindelbohrung D73 mm Durchlass 51 mm Antriebsleistung 16,5/11 kW Revolver 12-fach (mit innerer Kühlmittelzufuhr) Aufnahme VDI30 C Achse programmierbar Reitstockhülse Morse 4 Reitstockweg 550 mm Bewegung hydraulisch Strombedarf 28 kVA Gewicht ca 4400 kg Abmessungen (mit Späneförderer) 2800 (3680) x 1780 x 1850 mm Zubehör, Ausstattung - D210 mm SMW hydraulisches Spannfutter mit D65 Durchlass (Spindel gesperrt) - Späneförderer (Förderband) - Kühlmittelanlage - C+Y Achsen - Eingebauter Werkzeugmessarm - Reitstock - Handbücher

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 3.728 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0040001634C, stružna dolžina: 500 mm, premer struženja: 240 mm, moč vretenovega motorja: 1.400 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 6.000 obr/min, izvrtina vretena: 170 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 525 mm, pomik po osi Z: 525 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 22 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 171.192 Nm, sila podajanja os X: 3 N, DMG MORI CTX Alpha 500 je bil izdelan leta 2022. Ta vsestranski stružniški center je opremljen s krmilnikom Siemens in avtomatskim podajalnikom LNZ Quick Load Servo 80S2. Teža: 4.300 kg. Za več informacij o tem stroju nas prosimo kontaktirajte. Iodpfxjyz S T Se Abljaw

Stanje: rabljeno, NZX 1500/800SY je CNC stružno-glodalno-bušilni centar visoke preciznosti, velike tačnosti i pouzdanosti. Kapaciteti: 2 stružna vretena, 2 revolvera, prečnik obrtnog kruga 800 mm, maksimalni prečnik struganja 320 mm, maksimalni prečnik šipke 52 mm; hodovi osa Z 810 mm, X 210 mm, Y 110 mm (po klizaču). Tehnički podaci: broj obrtaja 0–6000 min⁻¹, snaga vretena 22/18,5 kW, snaga pogonjenih alata 7,5/5,5 kW, glava vretena JIS A2-5, provrt vretena 61 mm; brzi hodovi X 30 m/min, Z 50 m/min, Y 20 m/min; težina mašine ~8100 kg; dimenzije D4396׊2835×V2320 mm. Oprema: direktni sistem merenja X ose, osvetljenje, uređaj za hlađenje, hlađenje kroz protivvreteno, interfejs za utovarivač, hvatač delova, transportna traka za delove, transporter strugotine. Ostvaruje uske tolerancije; pogodan za autoindustriju, avioindustriju, medicinsku tehniku, časovničarstvo i mašinstvo. Iajdjyxn I Hjpfx Abljw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 5.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: DMG MORI SLIMline multi-touch, število mest v zalogovniku orodij: 42, This DMG MORI CLX 350 V3 was manufactured in 2023. It is a universal lathe equipped with driven tools and a C-axis. The machine features a hydraulic three-jaw chuck D210mm, a 12-position servo tool turret VDI 30 with 12 driven tool stations, and a hollow clamping device with a maximum bar capacity of D65mm. This is a great opportunity to purchase this DMG MORI CLX 350 V3 universal lathe. Contact us for further details about this machine. Additional equipment • Direct measuring system on X-axis • Chip tray • Hollow clamping device • Hydraulically operated tailstock via M-function • External electronic handwheel • DMG Mori IoT connector • Machine comes complete with tool holders, chuck, and jaws Additional information Iaedsyyuv Tepfx Ablsw • Main spindle: A2-6 with AC motor • Hydraulic 3-jaw chuck diameter: 210 mm • Max. bar capacity: 65 mm • Driven tools and C-axis for advanced machining capabilities • 190 spindle hours Machine still under power

Leto izdelave: 2014, stanje: zelo dobro (rabljeno),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 113 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AL150210302, stružna dolžina: 336 mm, premer struženja: 440 mm, izvrtina vretena: 61 mm, največja hitrost vretena: 6.000 obr/min, model krmilnika: DMG MORI COMPACT LINE, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Samo 113 obratovalnih ur! TEHNIČNI PODATKI Dolžina struženja: 336 mm Premer struženja: 440 mm Premer palice (maks.): 52 mm Obseg nad posteljo: 620 mm Obseg nad prečnim suportom: 465 mm Hitrost vretena (maks.): 6.000 vrt/min Število stopenj hitrosti vretena: 1 korak Notranji premer vretena: 61 mm Notranji premer ležaja vretena: 100 mm Premer držala za štirikotno orodje: 20 mm Premer držala za vrtalne palice: 32 mm Pomik X-os: 260 mm Pomik Z-os: 375 mm Hitrost pomika po X-osi: 30.000 mm/min Hitrost pomika po Z-osi: 30.000 mm/min Iajdpfx Aboytbqvelsw Število orodnih mest v zalogovniku: 12 PODROBNOSTI O STROJU Model krmiljenja: DMG MORI COMPACT LINE Frekvenca: 50 Hz Obratovalne ure: 113 h OPREMA Hladilni sistem Transporter za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.443 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 271 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 17.000 W, skupna višina: 1.950 mm, skupna širina: 3.260 mm, skupna masa: 6.300 kg, proizvajalec krmilnikov: FANUC, največja dolžina izdelka: 2.440 mm, število osi: 3, Ta 3-osna DMG MORI CLX450 je bila izdelana leta 2019. Ponaša se z revolverjem za orodja s 12 postajami in integriranim protivretenom za povečano produktivnost. Stroj je opremljen s tričeljustnim vpenjalom na glavnem vretenu. Če iščete zmogljive stružne funkcije, priporočamo DMG MORI CLX450 horizontalni stružni stroj, ki je na voljo za prodajo. Kontaktirajte nas za več podrobnosti. Ijdpfx Ajyu Sc Ejbleaw • Različica V3 (brez protivretena, brez Y-osi) • Brez podajalnika palic • Moč glavnega vretena: 25,5 kW (pri 40 % DC) ali 17 kW (pri 100 % DC) Tehnične specifikacije Protivreteno: Ne Pogonska orodja: Da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 15.208 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 880 mm, skupna masa: 12.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 21.000 W, število osi: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and travel distances of 730 mm in the X and Y axes, with a Z-axis travel of 880 mm. The machine is equipped with a robust 500 x 500 mm pallet size and a tool capacity of 40 tools. If you are looking for high-quality machining capabilities, you should consider the DMG MORI NHX 5000 horizontal machining center that we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool holder: BT40 • Tool capacity: 40 tools (optional magazine for 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B-axis: direct drive, indexing 0.001°, max. speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measurement system; linear scale standard • Control: CELOS Siemens 840D sl with 21.5" ERGOline multitouch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw measuring probe OMP60 Iajdoyt Hwzspfx Abljw • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling • Application tuning cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Circuit protection: 125 A • Short-circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating hours: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll flow monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 2.809 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7023000520B, stružna dolžina: 705 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, premer nihanja nad prečnim premičnikom: 742 mm, premer nihanja nad prečno desko: 920 mm, Attention – Images of milling accessories belonging to other machines were mistakenly included in this auction listing; these have now been removed. Please refer to the updated delivery scope as shown in the current images—approximately half of the accessories previously displayed are included with this machine. TECHNICAL DETAILS Working Area Swing diameter over bed, max.: 920 mm Swing diameter over cross-slide, max.: 742 mm Turning length, max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Max. speed: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Sub Spindle Power: 11/7.5 kW Max. speed: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank section: 25 mm Max. speed for driven tools: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Iedpfx Ajy Rxtweblsaw Operating hours: 2,770 h Power-on hours: 10,820 h Dimensions & Weight Machine height: 2,000 mm Installation footprint: 3,347 x 2,106 mm Weight: 5,820 kg EQUIPMENT Y-axis Sub spindle Main spindle with 10" chuck Sub spindle with 6" chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar feeder

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, moč vretenovega motorja: 11.000 W, skupna višina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 2.900 mm, število osi: 3, This 3-axis DMG Mori Seiki NLX1500MC/500 horizontal turning center was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret equipped with 12 driven stations, this DMG Mori Seiki NLX1500MC/500 offers an excellent purchasing opportunity. Contact us for further details. • Operating hours: 11,996 • CNC control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Programmable tailstock (B-axis), travel 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status beacon • Air-conditioned electrical cabinet • Condition/Availability: Machine in excellent condition; outstanding appearance; very good; videos available; immediately available Iodeyg Iclepfx Ableaw Additional equipment • Chip conveyor • Bar loader interface • Bar feeder magazine: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm • Hex collet: 14 mm • Tool-setting probe arm • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 18.071 h, skupna masa: 6.000 kg, število osi: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. The machine is ideal for precise vertical turning operations and stands out for its robust construction and reliability. If you are looking for high-quality turning solutions, you should consider the DMG MORI Gildemeister CTV 250 2nd that we have for sale. Please contact us for more information. Additional Equipment • Shopturn option Machine Benefits Technical advantages of the machine: • Available from • Weight: 6000 kg • 40 kVA • 58 A max. current • 63 A • 400 V • 50 Hz • Control: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holders • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal tower • Air blast through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel mm • Linear guide system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guide rails • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High pressure pump flow rate: 20 bar / 40 l/min • Coolant supply through turret disk to all turret stations • Band filter system filtration: 40 µm • Coolant level monitoring • Integrated work area extraction max. 400 m³/h • Renishaw LP2DD workpiece probe • Probes installed at loading and unloading stations • Stylus with pneumatically actuated flap and electronic control • Measuring accuracy: 10 µm • Functional plate for additional tools • Machine cabinet temperature regulation max. 40°C • Control cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnostics support via Internet • Work area rinsing with 3 flushing nozzles • Two separately switchable valves at 8 bar • Workpiece exit conveyor for SRA 160 transport system • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm, max. 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm, max. 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor with transport prisms • Drag chain motion controlled via NC axis • Set of drag frames • Workpiece diameter min. 30 mm/max. 160 mm • Light barrier for workpiece transport system intake station • Hold-down for SRA 160 pallet loading • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face plate chuck • Buffer tray on functional plate • Air blast cleaning for the inner workpiece area • Measuring probe with air blast with two nozzles front and rear • Clamping pressure adjustment with motor-driven valves • Clamping pressure programmable via NC program • Extension of chip chute at chip conveyor by 300 mm • Aluminum machining package Iasdex D Nl Ijpfx Ablsw • Modified sludge pump at chip conveyor • Forced indexing of band filter • Larger chip container • Extension of insertion screens on chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NTX26200912, stružna dolžina: 1.530 mm, premer struženja: 670 mm, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 675 mm, pomik osi Y: 300 mm, pomik po osi Z: 40 mm, največja hitrost vrtenja: 4.000 obr/min, število mest v zalogovniku orodij: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with a shortest installation length of 350 mm Machining option: Complete 6-sided machining thanks to a high-performance counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining envelope: Ø 670 mm x 1,530 mm Control system Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: Standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Counter spindle chuck: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with safety cover for main and counter spindle Travel control: Automatic stroke control of the clamping cylinder for main and counter spindle Turn-mill Spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool interface: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for bolt-on tool holders Milling performance: 6,000 rpm, 40 Nm (Turret 2, FANUC) Tool magazine Capacity: 76 tools Tool interface: CAPTO C6 Measuring & Monitoring Tool presetting: Manual tool presetter for main and counter spindle, removable (standard) Position measuring system: Direct measurement system in the X, Y, and Z axes of the turn-mill spindle Sensor system: Spindle sensor measuring system with wireless signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Iasdpfx Asyap Shebljw Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, multi) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Coolant & Chip Disposal Chip conveyor: Right discharge, hinge-type belt + drum filter Coolant: Use of water-soluble coolant (emulsion) Pressure: High-pressure coolant system, 70 bar Coolant supply: Through the spindle for tool spindle and lower turret Filtration unit: Knoll/Interlit Compressed air system Blow-off system: For chucks on main and counter spindle Oil mist system Oil mist separator: Extraction port Ø 200 mm, AFS 1600 Filter & Cooling System Filtration unit: INTERLIT TMF300/980 compact filtration unit, 70 bar Additional pressure: 15 bar for turret II with lift pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7024NL256160890J, največja hitrost vretena: 10.000 obr/min, pomik osi Y: 200 mm, največja hitrost vrtenja: 4.000 obr/min, Premer palice (maks.): 80 mm, razdalja med središči: 700 mm, Condition: Ball screw drives on X, Y, and Z axes new + major maintenance package carried out approx. one year ago (machine has not been in use since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar diameter: 80 mm Mount: MT5, live center Without center point Turret: 12 stations, bolt-on turret Projection length for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for center point Chip and coolant system Iaedpfx Ajy A Icrjblow Scraper-type chip conveyor with magnetic separation, discharge height approx. 1,000 mm Coolant system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air release system for toolholder sleeves Compressed air release system for tailstock center point Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% DC / 50% DC / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal light: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for DMG Mori Seiki gantry robot Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without chuck, tool presetter and workholding devices.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, DMG MORI CMX 50 U 3+2 leto 2022 Krmiljenje Siemens SlimLine Pomiki: X-500 mm Y-450 mm Z-400 mm B -5 / +110 ° C 360 ° Vreteno 15000 rpm max Revija za orodja 60 kos BBT40 Hlajenje skozi vreteno 70 Bar Izmetovalnik odrezkov Filtrirni papir Visokotlačne hladilne črpalke Sonda za obdelovanec, sonda za orodje Iodpfx Abjxyi Hwolsaw Quickset (kalibracija rotacijskih osi) Stroj v zelo dobrem stanju, na voljo v našem skladišču v Franciji 01360 Loyettes Celotna specifikacija spodaj v pdf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 4.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL154200702, Origine de fabrication JP Tension 380V/50Hz/3ph Poids net 5400 kg Position douanière 8458.9100 DONNÉES TECHNIQUES Diamètre de tournage max. 350 mm Longueur de tournage 515 mm Commande numérique M730UM MAPPS Celos Passage au-dessus du banc 923,8 mm Diamètre de rotation sur chariot 755 mm Diamètre de tournage standard 260 mm Diamètre de barre 34 mm Broche principale : Plage de vitesses - broche 100 - 8 000 tr/min Puissance - moteur de broche 11 / 7,5 kW Axe C 0,001° Diamètre de serrage 210 mm Contre-broche : Vitesse 8 000 tr/min Nez de broche A2-5 Courses des axes : Axe X 260 mm Iedpfx Absw T Sn Eoloaw Axe Z 580 mm Axe Y 100 (+/-50) mm Tourelle : Tourelle (stations X) 20 stations Stations motorisées 20 Diamètre de broche 25 mm Vitesse max. outils entraînés 10 000 tr/min Puissance outils entraînés 5,5 / 3,7 kW Avances : Avance rapide axe X 30 m/min Avance rapide axe Z 30 m/min Avance rapide contre-broche 30 m/min Avance rapide axe Y 10 m/min Avance rapide axe C 400 tr/min Puissance totale requise 31 Kva Poids machine env. 5,4 tonnes Dimensions machine env. 4,0 x 3,0 x 3,2 m Sous réserve d’erreurs ou d’omissions – données sans engagement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.473 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12780000173, DMG MORI NHX 5000 About the machine: High-precision and reliable machine. Available immediately. Technical specifications: - Control system: Siemens 840D - Travel (X, Y, Z axes): 730/730/880mm - C-axis travel: 360° - Clamping surface rotary table: 500x500mm - Spindle speed: 20-15,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Pallet changer with 2 stations - Automation interface available Accessories: - Through-spindle coolant system, 70 bar, with belt filter unit - Work area rinsing system - BLUM measuring probe - Rinsing gun - Chip conveyor - Signal light tower - Handheld control unit Inspection/testing under power on site is possible by prior arrangement. We are pleased to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul - Automation Iedpfxeyhwpwo Abljaw of DMG machines and those of other renowned manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.550 mm, moč vretenovega motorja: 22 W, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 80 mm, vrsta vhodnega toka: trifazni, skupna masa: 19.650 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Ponujamo to rabljeno DMG MORI NTX2500/1500SZ NTX2500-1500 SZ + polna opcija + cikli, letnik 2019. Tip stroja: NTX2500/1500SZ Serijska številka: NTX25181202 Letnik proizvodnje: 2019 Tovarniška ID: 1 Kataloška številka (Diagram No.): NTX25181202 Teža: 19.650 kg Nazivna moč: 93 kVA Tok pri polni obremenitvi: 269 A Iaodpfxjy H D H Ue Abljw Glavna varovalka: 350 A Faza: 3 Frekvenca: 50 Hz Napetost AC: 400 V Napetost DC: 24 V Napajanje: 200 ±10 V Kratkostični tok: 5 kA Največji tok motorja: 113 A Za vprašanja ali dodatne informacije nas prosim kontaktirajte preko sporočila ali telefona.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, We offer you: Isdpfxeyzbl Re Ableaw Manufacturer: DMG Mori Model: CLX 350 V6 Year of manufacture: 2022 Control: DMG Mori SLIMline Siemens Operate Technical specifications: Max. turning diameter: 320 mm Distance between centers: 780 mm Bar capacity: max. 65 mm Travel distances: x-axis travel: 185 mm y-axis travel: +/- 40 mm z-axis travel: 465 mm Main spindle: Spindle speed: 5,000 rpm Drive power: 11/16.5 kW Counter spindle: Spindle speed: 5,000 rpm Drive power: 12.6/16.2 kW Number of tool positions: 12 stations Tool holder: VDI 30 Operating hours: approx. 1,760 h Spindle hours: approx. 1,130 h Technical features & accessories: - Direct position measuring system x- and y-axis - External electronic handwheel - Bar package & interface, comprising: - Workpiece pick-off device for parts up to D65 x 200 mm, max. workpiece weight 3 kg - Connection for bar feeder - Chip conveyor with right-side discharge - 4-color signal lamp - Collet chuck, make Hainbuch SPANNTOP nova combi - Differential pressure clamping for counter spindle - External chuck flushing for counter spindle - Automatic workpiece ejector, counter spindle with internal coolant supply for chuck cleaning - Hydraulic 3-jaw chuck, make SMW BB-D 175 for counter spindle - Coolant system 5 – 20 bar, including: - High-pressure pump - Double cartridge filter for coolant - Coolant spray gun 5 bar - Preparation for oil mist separator - Manual tool measuring system - Automatic bar loader, make IEMCA KID80/16 - Partial belt conveyor - Technology cycle "Alternating Speed" - Technology cycle "y-Axis parting" - Technology cycle "Easy Tool Monitoring 2.0" Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!