Danfoss Vlt 8152 nakup rabljenega (178)

Stanje: pripravljen za uporabo (rabljen), Heidenhain UM 111D ID 815260-01 Stroški vključujejo le analizo popravila vašega sestavnega dela, ki nam ga lahko pošljete. Po pregledu vašega sestavnega dela boste prejeli ponudbo s dejanskimi stroški popravila. Po vaši odobritvi popravila bodo stroški analize odšteti. Med popravilom bo vaš sestavni del popolnoma obnovljen in zanj boste prejeli 3-mesečno jamstvo z naše strani. Ijdpfjy Nq Tyjx Abxeic

Stanje: pripravljen za uporabo (rabljen), Heidenhain UM 117DW ID 815260-07 Stroški vključujejo samo analizo popravila vašega sestavnega dela, ki nam ga lahko pošljete. Po pregledu vašega sestavnega dela boste prejeli ponudbo z dejanskimi stroški popravila. Po vaši odobritvi popravila stroški za analizo odpadejo. Vaš sestavni del bo v okviru popravila popolnoma prenovljen in od nas prejme 3-mesečno garancijo. Iisdpfxjy Nrd Hj Abxjc

Stanje: pripravljen za uporabo (rabljen), Heidenhain UM 111BD ID 815260-03 Stroški vključujejo le analizo popravila vašega sestavnega dela, ki nam ga lahko pošljete. Po pregledu vašega sestavnega dela boste prejeli ponudbo s pravimi stroški popravila. Po vaši odobritvi popravila bodo stroški analize odšteti. Med popravilom bo vaš sestavni del v celoti obnovljen in zanj prejmete 3-mesečno garancijo. Ijdpsy Nq Tgefx Abxjic

Stanje: rabljeno, največja dovoljena obremenitev: 150 kg, skupna masa: 1.000 kg, konfiguracija osi: 1 os, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2027, skupna širina: 1.810 mm, skupna višina: 1.650 mm, * NISSEN VLTLED/10 Opozorilna tabla * 4 barve na obeh tablah * RADAR brezžični opozorilnik 2x4 kanali * Polnilec * Brezžični daljinski upravljalnik za prometno tablo Iodpfx Abjyvwqlexeic * Pnevmatike 195/70R 14 91J * Priklop nastavljiv po višini Možnost najema

Stanje: rabljeno, Electric motor, three-phase motor - Voltage: 36 V Iijdpfjdwa Dfox Abxoc - Speed: 320 rpm - Shaft diameter: 19 x 40 mm - Dimensions: Ø 167/H199 mm - Weight: 16 kg

Leto izdelave: 2013, stanje: rabljeno, NH3 refrigeration plant for cooling glycol and brewing water, consisting of the following components: - NH3 separator for brewing water, 890 l (T0 = -0.5°C) - NH3 separator for glycol, 647 l (T0 = -6°C) - 3 x reciprocating compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water chiller, Q0 = 200 kW - Evaporative condenser - Water tank, approx. 47,000 l Isdexbpamepfx Abxoic - Glycol tank, 8,000 l + 2 x glycol pumps - Plate heat exchanger as glycol chiller Q0 = 100 kW - High-pressure receiver, 830 l - Danfoss frequency inverter type VLT HVAC Machine (additional): NH3 refrigeration plant Refrigeration capacity Q0 brewing water: 200 kW Refrigeration capacity Q0 glycol: 100 kW Evaporation temperature t0 brewing water cooling: 0°C Evaporation temperature t0 glycol cooling: -6°C Current: 185 A / 250 A Equipment: 2 x NH3 separators (t0 = -0.5°C; t0 = -6°C); 3 x reciprocating compressors; 2 x brewing water pumps; water chiller Q0 = 200 kW; evaporative condenser; water tank; high-pressure receiver; glycol tank + 2 x glycol pumps; glycol chiller Q0 = 100 kW; Danfoss frequency inverter type VLT HVAC.

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-980 SA Order No. 15.207 Year of manufacture: 1972 Trough diameter: 1850 mm Total trough external height: approx. 1150 mm Work tank / gross volume: max. 980 liters Usable volume: approx. 490 liters Maximum workpiece diameter: approx. 300 mm (measured diagonally) Isdpfxjdzqn Ds Abxoic Screening area: 3400 cm² Speed: 1000 to 1700 rpm, stepless Motor power: 22 kW Power supply: 400 Volt, 50 Hz - Duty cycle manually and via timer - Stepless motor speed via DANFOSS drive controller type VLT 3032 (frequency inverter) - Manually adjustable eccentric imbalance weights - Tank lined with rubber - Sound-insulated cover with pneumatic lid opening - Manual separation flap - Integrated screen separating device after the separation flap - Liquid connection - Material discharge opening: 470 x 300 mm - Control cabinet and drive controller for wall mounting - Baffle plate cover with perforated screen - 1 box of pyramid-shaped grinding media Required space (L x W x H): 3000 x 3000 x 2550 mm Transport dimensions (L x W x H): 2300 x 3000 x 2550 mm Net weight: 2500 kg Good condition Function description: Workpieces and grinding media are set in motion by the generated vibration and are circulated extremely gently. The constant relative movement between the workpieces and the media causes deburring and surface finishing of the workpieces.

Leto izdelave: 2016, stanje: rabljeno, Hersteller: IMMEQUIP Engineering Modell: CEMH 360 Baujahr: 2016 Arbeitsbreite: 36 cm Typ: Schneide- / Laminiermaschine Aufbau & Design: Komplett aus Edelstahl 304L, mechanisch verschweißter Rahmen Ausgestattet mit 4 Lenkrollen mit Feststellbremse Förderband (Einlauf): - Motor: 0,25 kW – Drehstrom 400V - Produktführung über Edelstahlkamm Iodpfjy Hdqasx Abxoic Förderband (Auslauf): - Motor: 0,37 kW – Drehstrom 400V - Integrierte Ausblasrampe Schnittaggregat: - Schneidrad Ø 350 mm - 3 Messerhalter (45° und 90°) - 3 geschliffene, gehärtete Stahlmesser (Z30C13 – 40/42 HRC) – Erweiterung möglich - Drehzahl: 72 U/min - Motor: 0,37 kW – Drehstrom 400V - Führung mit Edelstahl-Kugellagern - Schneidsatz verfügbar: 90° und 45° Produktausrichtungs-Kit: 1 symmetrisches Set, bestehend aus je 1 Zelle, 1 Halteklappe und 1 Pneumatikzylinder Walzenfunktion: - Nicht angetriebene Edelstahlwalze, Ø140 x 350 mm - Spaltverstellung: manuell - Verstellbarer Anti-Verschmutzungsabstreifer Stromversorgung: Drehstrom 400V – 50 Hz Danfoss VLT Frequenzumrichter Bedienerdisplay (HMI) Vollständige Maschinensteuerung Summer + Betriebsanzeigeleuchte Not-Aus-Schalter (einschließlich 1 am Schneidaggregat) Elektrische Dokumentation vorhanden

Leto izdelave: 2021, stanje: rabljeno, Hersteller: IMMEQUIP Engineering Modell: CEMH-LAM360 Baujahr: 2021 Typ: Schneide- / Laminiermaschine Aufbau & Konstruktion: Komplett aus Edelstahl 304L geschweißter Rahmen Ausgestattet mit 4 schwenkbaren Rädern inkl. Feststellbremse Abmessungen Gesamtlänge: 3550 mm Eingabebandhöhe: 1025 mm (±15 mm verstellbar) Ausgabebandhöhe: 737 mm Bandbreite: 360 mm Förderband: Eingabeförderer - Weißes Silikonband von NEOBELTING - Maximale Temperatur: 90°C im Dauerbetrieb - Geschwindigkeit: 17 m/min - Motor: 0,25 kW – 400V Drehstrom - Produktführung über Edelstahlkamm Transportsystem: Ausgabeförderer - Weißes Silikonband von NEOBELTING - Geschwindigkeit: 43 m/min - Motor: 0,37 kW – 400V Drehstrom Iiedpfx Abjy Dvpvexsc - Integrierte Abblaserampe Schneideeinheit - Schneidrad Ø350 mm - 3 Messerhalter (45° und 90°) - 3 geschliffene und gehärtete Stahlmesser (Z30C13 – 40/42 HRC) – weitere Messer können montiert werden - Drehzahl: 72 U/min - Motor: 0,37 kW – 400V Drehstrom - Edelstahlgehäuse mit einstellbarer Andruckrolle - Edelstahlrollenführung - Schneidsatz verfügbar: 90° und 45° Produkto Ausrichtkit: 2 symmetrische Einheiten, jeweils bestehend aus 1 Lichtschranke, 1 Stoppklappe und 1 Pneumatikzylinder Rollfunktion - Nicht angetriebene Hohlwalze aus Edelstahl, Ø140 x 350 mm - Spalteinstellung: manuell - Verstellbarer Antihaft-Abstreifer Stromversorgung: 400V Drehstrom – 50 Hz Danfoss VLT Frequenzumrichter Bedienerdisplay (HMI) Komplettmaschinensteuerung Signalhorn + Betriebslampe Not-Aus-Taster (inklusive 1 an der Schneideinheit) Elektrische Dokumentation vorhanden

Stanje: rabljeno, Leto izdelave: 2009, negativen tlak: 16.000 Pa, filtrirna površina: 40 m², volumenski pretok: 5.800 m³/h, Dust extraction unit, extractor, dust collector by RUWAC – self-cleaning, vacuum filter equipped with a filter cartridge for effective removal of metal, mineral, hard fiber, combustible, hazardous, and toxic dusts, as well as for efficient collection of process dust from sandblasting, soda blasting, grinding, polishing, and handling all types of dry dust. Thanks to its broad performance range, these units are ideally suited for almost all applications – both as single-user and centralised solutions. All dust collectors come equipped with large surface filters certified for dust class M. The device is configured with dust explosion protection (ATEX zone 22) – EX II 3D, T = 70°C. The high-pressure fan is positioned downstream of the filter (on the clean air side), which minimizes explosion risk. Pocket filter cartridge – multi-pocket (filter area: 40 m²). 20 kW fan. Includes frequency inverter (Danfoss VLT). Capacity: 5,800 m³/h. Vacuum: 16,000 Pa. Electromechanical filter cleaning via vibration motors. The package includes a dispenser (for sticky dusts) for automatic dosing of filter additives to protect filter cartridges. Inlet diameter: 300 mm. Iiodpfxotqt Uxj Abxoc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 1.153 h, DYNO-MILL KD 6 Kulový Mlyn s Míchačem (2007) Na prodej nabízíme horizontální mlecí míchač DYNO-MILL KD 6, vyrobený švýcarskou firmou Willy A. Bachofen AG (WAB). Toto zařízení je prvotřídní švýcarský stroj určený pro kontinuální dispergaci a mokré mletí čerpatelných produktů s nízkou až vysokou viskozitou. Zařízení bylo vyrobeno v roce 2007 a bylo odstaveno z provozu ve zcela funkčním a provozuschopném stavu bez poruch. Disponuje mimořádně nízkým počtem provozních hodin: pouze 1 153 hodin. Je vybaveno vysoce odolným vnitřním válcem z karbidu křemíku (SiSiC) a kalenými nerezovými kotouči. Prodává se jako kompletní sestava včetně peristaltického čerpadla, sady nástrojů, originálního elektrického rozvaděče a použitých zirkonových kuliček stabilizovaných yttriem. Hlavní výhody: - Nízké využití: Pouze 1 153 provozních hodin – interní mechanika ve vynikajícím stavu. - Prémiová konfigurace: Keramický vnitřní válec z karbidu křemíku (SiSiC, tloušťka stěny 6 mm) a kotouče z kalené nerezové oceli pro maximální životnost a kontrolu kontaminace. Slinovaný karbid křemíku (SSiC) znatelně lépe zabraňuje přehřátí produktu než vložky ze zirkonu či oceli. - Připraveno k okamžitému provozu: Kompletní balení včetně elektrického rozvaděče a peristaltického produktového čerpadla. - Disponuje dynamickým mezerovým separátorem WAB (průmyslový standard) a tlakem vyváženou mechanickou ucpávkou. - Napájení: Moderní frekvenční měnič Danfoss VLT s širokým vstupním rozsahem (380–480 V, 50/60 Hz) – přímá kompatibilita s evropskou (400V) i americkou (480V) rozvodnou sítí bez nutnosti úprav. Technické specifikace: - Výrobce: Willy A. Bachofen AG (WAB), Švýcarsko - Model: KD 6 - Objem mlecí komory: 6,0 litrů (Čistý objem ~5,7 litru) - Výkon: cca 50–200 kg/h (v závislosti na produktu a viskozitě) - Hlavní pohon: Motor 11 kW (440 V / 60 Hz) - Separace: Dynamický mezerový separátor (rotor/stator z karbidu wolframu) s nastavitelnou šířkou mezery (0,15–1,0 mm) - Těsnění hřídele: Dvojitá mechanická ucpávka (DGD) s integrovaným okruhem tlakové výplachové kapaliny - Chlazení: Plášť s nuceným chlazením vodou pro mlecí válec - Hmotnost: 695 kg Rozsah dodávky: - Mlyn: Základní jednotka DYNO-MILL KD 6 - Mlecí systém: Vnitřní válec z karbidu křemíku (SiSiC) a kalené nerezové kotouče - Dávkovací čerpadlo: Peristaltické čerpadlo v ceně - Ovládání: Originální elektrický rozvaděč v ceně Ijdox Tdyzepfx Abxoic - Mlecí médium: Keramické kuličky (zirkon stabilizovaný yttria), čtyři velikosti, každá cca 25 kg (0,4–0,6 mm / 0,8–1,0 mm / 1,2–1,4 mm / 1,6–1,8 mm) - Dokumentace: Návod k obsluze a elektrická schémata Stav: - Mechanický: Vynikající, provozuschopný stav bez známých vad při odstavení. - Vizuální: Stroj je čistý, vykazuje drobné vizuální opotřebení (viz foto) - Poslední použití: Potravinářství Typické aplikace: - Ideální pro jemné mletí v průmyslových oborech jako jsou: - Barvy, inkousty, laky - Agrochemikálie, chemikálie - Farmacie, mikrobiologie - Potraviny, kosmetika Celosvětová doprava možná. V případě zájmu nebo dotazů nás kontaktujte! Možnost prohlídky v Liestalu, Švýcarsko.

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno),

Stanje: rabljeno, Leto izdelave: 2008, Overview This stretch blow molding machine was manufactured in 2008 by the Italian company KOSME (Krones Group). The machine is in good working condition and will remain in production until the end of November 2025. After that, it will be dismantled and craned out through the roof. Technical Data Iiodpfx Asyb Tbiobxec Output: 10,200 bottles per hour Operating hours: approx. 50,000 h Formats: Neck finish: 29/21 (can be changed to 1881 or others) Preforms used: R-PET from Plastipak & Resilux Number of cavities: 6 (molds not included) Equipment & Features: - Quick-change system for shell molds - Kosme linear oven with 8 heating modules - Kosme preform tipper with conveyor system - Kosme preform feed rail - Kosme control cabinet - Kosme Danfoss VLT drive - Kosme touchscreen operator panel - Spare parts kit (list available upon request) Maintenance History: - Kosme FBA maintenance - Complete Kosme maintenance in October 2024 - Ongoing maintenance by in-house technicians Scope of delivery - KOSME KSB 6R blow molder - Preform tipper with conveyor system - Preform feed rail - Control cabinet - Drive and operator panel - List of spare parts (upon request)

Stanje: rabljeno, Leto izdelave: 2000, Overview This stretch blow molding machine was manufactured in 2008 by the Italian company KOSME (Krones Group). The machine is in good operating condition and will remain in production until the end of November 2025. After that, it will be dismantled and lifted out through the roof. Technical Specifications Iiodpfeyb Tbpex Abxec - Capacity: 10,200 bottles per hour - Operating hours: approx. 50,000 h - Formats: Neck finish: 29/21 (can be converted to 1881 or other formats) - Preforms used: R-PET from Plastipak & Resilux - Number of molds: 6 (molds not included) Equipment & Features - Quick-change system for shell molds - Kosme linear oven with 8 heating modules - Kosme preform tipper with conveyor system - Kosme preform feed rail - Kosme control cabinet - Kosme Danfoss VLT drive - Kosme touchscreen control panel - Spare parts kit (list available on request) Maintenance History - Kosme FBA maintenance - Complete Kosme maintenance in October 2024 - Ongoing maintenance by in-house technicians Scope of Delivery - KOSME KSB 6R blow molding machine - Preform tipper with conveyor system - Preform feed rail - Control cabinet - Drive and control panel - Spare parts list (on request)

Stanje: dober (rabljeno), Leto izdelave: 2021, hladilna zmogljivost: 25 kW (33,99 KM), CO2 installation & cold room in good condition, year of manufacture 2021. Cold room temperature approx. +4°C and an evaporation temperature of -8°C. The system includes the following: One cold storage room with a panel thickness of 100 mm and an insulation value of RC 5.21. The cold room is equipped with an electric sliding door and three Bachara MGS 450/CO2 gas detectors—one for the machine unit and two inside the cold room. The cold room temperature is approximately +4°C. Internal dimensions: 24,800 x 7,800 x 2,900 mm (L x W x H) Iiodpfx Ajrz R Arjbxsc External dimensions: 25,000 x 8,000 x 3,100 mm (L x W x H) Sliding door dimensions: 2,500 x 2,500 mm (W x H) Cold storage surface area: 194 m² Cold storage volume: 600 m³ Advansor MiniBooster 2x1 unit complete with one low temperature Bitzer 2HSL-3K-40S & two medium temperature Bitzer 4KTE-10K-40S semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid receiver, two Danfoss VLT drives, and a Danfoss MMI control display. Dimensions: 1,000 x 800 x 2,200 mm (L x W x H), weight: 820 kg. The low-temperature circuit is not used in the current configuration, but the option is available. Delta FMT-7028 (x4) evaporators with a capacity of 6.3 kW each. Each evaporator has two fans with a blade diameter of 350 mm and an airflow of 3,000 m³/h. Dimensions: 1,370 x 470 x 465 mm (L x W x H). Eco KCE62M6V.4314 gas cooler with two EBM-Papst A3G630-AR85-90 fans – 50/60 Hz – 0.97 kW – 1,140 RPM – diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information! Specifications Brand: Bitzer Type: CO2 system & cold room Refrigerant: CO2 Capacity: 25 kW (-5ºC/+40ºC) Year of manufacture: 2021

Stanje: dober (rabljeno), CAMA Multipack MP 135 – Automatisk Multipak-/Grupperingsmaskine Producent: CAMA S.p.A., Italien Model: Multipack MP 135 Serienr.: 98060 Produktionsår: 1998 (CE-dokumentation færdiggjort i 2000) Tilstand: Brugt, komplet og veldokumenteret Anvendelse: CAMA Multipack MP 135 er en fuldautomatisk multipakmaskine, udviklet til gruppering og pakning af bægre i faste konfigurationer. Maskinen er velegnet til fødevareindustrien (f.eks. mejeriprodukter, desserter, yoghurt m.m.) og håndterer både enkelt- og dobbeltlags pakker. Pakningskonfigurationer: Maskinen understøtter flere pakkestørrelser, herunder: 2 × 2 (enkelte eller dobbelte lag) 2 × 3 (enkelte eller dobbelte lag) En detaljeret oversigt over tilgængelige pakkestørrelser og layout følger i dokumentationen. Tekniske data: - Strømforsyning: 380 V / 50 Hz - Faser: 3 + N - Maks. fuldlaststrøm: 18 A - Største belastningsstrøm: 7 A - Kortslutningsafbrydelsesevne: 16 kA - Kapslingsklasse: IP65 - Styrespænding: 24 V DC Styring & komponenter: - PLC: Siemens Simatic S5-100U (CPU 103) - Frekvensomformer: Danfoss VLT 5000 - Pneumatik: Festo - Vakuumpumpe: Becker VT 3.25 - Hotmelt-enhed: Nordson Vista 3400V2EAV2D/AR - Transportbåndsdrivning: SEW-Eurodrive - El-komponenter: Telemecanique / Deutschmann Funktioner: Isdel Ayhxspfx Abxoic - Automatisk gruppering og pakning af bægre - Fleksibel formatomstilling - Sikkerhedsafskærmning med interlocks - Nødstop og sikkerhedssystemer - Akustiske og visuelle statusindikatorer Dokumentation: Maskinen leveres med omfattende original dokumentation, herunder: - CE overensstemmelseserklæring - El-diagrammer - Pneumatikdiagrammer - PLC-programliste - Maskinlayout - Brugs- og vedligeholdelsesmanualer

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 14.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 85-089, skupna masa: 20.000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation, based on a Reinartz AP15 press with a 55kW motor driven via a DANFOSS VLT 5062 frequency converter. It has a capacity of 1,000 kg rapeseed or 800 kg sunflower seeds per hour, a crude oil agitation tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump feeding an automatic AMA filtration system consisting of a plate filter with 20 m² filtration area and two fine filters—one with a filter bag and one with filter candles, filtering down to 0.5 micron impurity size. Seed feed is handled by a dosing screw, with the option to heat the seed. The main entry to the press is protected by a permanent magnet to trap ferrous contaminants. Discharge of the rapeseed cake takes place via a chain conveyor and belt conveyor. The entire installation is controlled by a SIEMENS Simatic Multi Panel touch screen control cabinet measuring approximately 1m wide by 2m high. This cabinet also contains a modem to forward error notifications to various mobile phones. The control system can operate in both automatic and manual modes. In addition to these core systems, the installation also includes the necessary supplementary silos to refill the main silo, allowing for 24/7 operation. Iodpfx Abswl Afysxjic The complete installation was built in 2006, has produced for 14,000 hours, and is now fully prepared for transport. If desired, the sale of separate components can be discussed. For further information, please contact us by email, preferably in Dutch, French or English.

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 47 kW (63,90 KM), vrsta vhodnega toka: trifazni, skupna masa: 240 kg, raven hrupa: 34 dB, vhodna frekvenca: 50 Hz, Oprema: zamrzovalnik, CIAT DYNACIAT LGN120 Liquid Chiller without Condenser. Manufacturer: CIAT DYNACIAT Year of manufacture: 2005 Electronic control Cooling capacity: 34 kW Compressor: 1 unit - Hermetic SCROLL type Danfoss Performance SZ125S4CC Refrigerant: R407C Input: 11.5 kW Voltage: 3-phase 400 V 50 Hz IP44 Current: 19.5 A Evaporator - Brazed plate heat exchanger Heat exchanger capacity: 4.2 liters - Plate design optimized for high efficiency - 19 mm Armaflex thermal insulation Connection: 1.5" Machine dimensions: Height: 121 cm Core: 160 cm Width: 79 cm Length: 88 cm Iedpovzrxcsfx Abxjic Weight: 250 kg - Electronic expansion valves - Service valves on liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24 V control circuit - Connection for microprocessor-controlled electronic 'Touch' panel

Stanje: rabljeno, Leto izdelave: 2005, številka stroja/vozila: LC561, Used UHT Milk Preparation Room Tetra Pak 6600 L/h Technical Overview of the System The used UHT milk preparation room Tetra Pak 6600 L/h offers a complete solution for the aseptic preparation of UHT milk, drinking yoghurt, juices, and flavoured beverages. Currently in storage and ready for reinstallation, the system delivers high thermal and microbial efficiency. Furthermore, its modular design allows operation at 2,640 L/h, 3,850 L/h, and up to 6,600 L/h in the full configuration, making it highly adaptable to different production requirements. Homogenization Section At the core of the used UHT milk preparation room Tetra Pak 6600 L/h is a Tetra Pak homogenizer, model Tetra Alex, which ensures effective reduction of fat globule size and uniform product texture. This stabilizes complex emulsions such as flavoured milk or drinking yoghurt and prevents phase separation during storage. It is important to note that this homogenizer is not aseptic and is located before the UHT sterilization process, thereby eliminating any microbial load introduced during homogenization. Additionally, the homogenizer supports high working pressures and facilitates maintenance. The robust construction guarantees long-term reliability. Integrated Degassing System The system is equipped with a Tetra Pak deaerator (2005) featuring an auxiliary pump and tank. Specifically, this component removes dissolved oxygen and unwanted gases from the product prior to thermal treatment. As a result, it improves product stability and reduces oxidation. Additionally, the vertical construction ensures efficient gas separation. At the same time, the design minimizes product losses and ensures a continuous flow to the next stage. High-performance UHT Module Thermal sterilization is achieved using a tubular UHT heat exchanger produced by Tetra Pak, model Tetra Therm Aseptic. This particular component sterilizes products via indirect heat transfer while maintaining organoleptic properties. Of note, the module contains a holding coil to maintain temperature for a defined period, thus meeting food safety regulations and ensuring microbial safety. Its modular design also enables easy integration into existing lines. Electrical Control and Automation The line comprises an electrical control cabinet, a Siemens PLC, and operator panels for precise control of every phase. Significantly, it comes with detailed electrical diagrams, Festo pneumatic valves, and Danfoss frequency inverters to dynamically control pumps and heat exchangers. This automation enables continuous processing and optimizes CIP cycles, reduces downtime, and increases traceability. Above all, it ensures reliable performance under varied operating conditions. Isdpfxswqxhhj Abxoic Conclusion In summary, the used UHT milk preparation room Tetra Pak 6600 L/h offers a complete, highly efficient system for the preparation of UHT milk and beverages. With its top-quality components and scalable design, this line is an ideal solution for both expanding and modernizing existing dairy operations or beverage plants.

Stanje: rabljeno, Leto izdelave: 2022, nosilnost: 6.000 kg, dvižna višina: 20.800 mm, skupna dolžina: 7.890 mm, - Rotating Telehandler RTH 6.21 - Maximum lifting capacity: 6,000 kg (load center 600 mm) - Maximum lift height: 20.80 m - Rotation: 360° continuous - Rated power: 100 kW (136 hp) at 2,200 rpm - Maximum torque: 500 Nm at 1,600 rpm - Displacement: 3.6 l - Number of cylinders: 4 in-line - Engine configuration: Diesel engine with direct injection and turbocharging - Cooling system: Water-cooled intercooler - Drive type: Hydrostatic - Model: Danfoss / Rexroth - Maximum pressure: 480 bar - Pump output: Electronically controlled axial piston pump. Variable displacement motor. - Transmission: Dropbox transmission with 2-speed forward and reverse travel - Axles and brakes: Planetary final drive axles - Rear axle: Steerable oscillating axle with hydraulic lock - Front axle: Oscillating steering axle with level compensation +/- 8 degrees Iiedpfxjy T Srle Abxsc - Service brake: Oil-immersed multi-disc brake on each axle, hydraulically actuated - Parking brake: Negative brake, hydraulically actuated - Tire size: 445/65 R22.5 - Performance: - Maximum travel speed: 40 km/h - Maximum drawbar pull at load hook: 72 kN - Gradeability: 41% - Turning radius (with forks): 5,900 mm - Unladen weight: 17,600 kg - On front axle, unladen (boom retracted and lowered): 8,000 kg - On rear axle, unladen (boom retracted and lowered): 9,600 kg - Maximum operating pressure: 350 bar - System type: Load sensing - Working pump: Danfoss / Casappa variable displacement pump - Distributor for boom and superstructure movements: Danfoss electro-proportional valve, SIL - Distributor for stabilizers: Bosch Rexroth electrohydraulic actuators - Motion control: Two 2-axis Danfoss joysticks with deadman function, CAN bus control

Stanje: novo, prevoženi kilometri: 21 km, moč: 110 kW (149,56 KM), vrsta goriva: dizel, lastna masa: 2.895 kg, največja dovoljena obremenitev: 605 kg, skupna masa: 3.500 kg, konfiguracija osi: 4x2, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: drugo, število sedežev: 3, dolžina tovornega prostora: 2.720 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, spojka prikolice, zapora diferenciala, žerjav, FUSO Canter 3S15 aluminum flatbed with loading crane—available immediately. The vehicle is for rent with a purchase option. Chassis: Fuso 3S15 Canter - Gross vehicle weight: 3,500 kg; payload (complete vehicle with crane and flatbed): approx. 600 kg - Manual transmission - Limited-slip differential - 2 x 100 Ah batteries - Trailer coupling (ball head) 3,500 kg with factory-installed electrical kit - Heated exterior mirrors - Automatic climate control - Radio pre-wiring - Reversing warning system - PTO with increased RPM - Battery and AdBlue tank covers - Pre-wiring for battery isolation relay - Continental traction tires 195/75/R16C - Seat covers Aluminum flatbed: - Inner dimensions: 2,720 mm x 1,820 mm x 400 mm - 18 mm floor plate - Floor frame with airline rails around the perimeter - Airline rail also in front wall - Sidewalls: anodized aluminum with folding step, easily removable - Tool/storage box - Work lights - Other flatbed dimensions available upon request Loading crane: with 3x hydraulic extensions (Country of manufacture: Italy) - Max. lifting capacity according to manufacturer: 995 kg; 3.2 m = 815 kg, 4.4 m = 575 kg, 5.6 m = 400 kg, 6.8 m = 300 kg, 8.05 m = 220 kg - CE-compliant version (EN 12999) - Slewing range: 370° (slewing range limitation: 190°) - All hydraulic cylinders double-acting - Hard chrome-plated piston rods - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted at crane base - Outriggers extendable on both sides, special outriggers, support width 3.10 m - Hydraulic support rotatable 30° and 180°, CE, incl. M.O.L. - Load hook and mounting brackets - 12V onboard power supply - Electronic modules for Danfoss S800 control block, 4 functions - Danfoss S800 control block, 5 functions incl. high-pressure filter - Special outriggers, support width 3.10 m (1 pc) - Extra charge for shortened support legs (by 80 mm) - Mechanical jib extension “N” – 1.3 m stroke (7.0 kg) - Stainless steel bolts and hose clamps - Dinitrol cavity protection - Zinc primer - Switch for work lights mounted at control block from factory - LED work light at articulated arm, factory-mounted - LED for 2 support legs - Options: reversing camera with CarPlay, spade holder, 90° cable, ladder rack/transport frame for front or rear wall, additional tool box available Ijdjywzygopfx Abxjic Errors and prior sale excepted. ... Air conditioning, climatronic, VAT deductible, ASR, ABS, onboard computer, electric windows (front), electronic immobiliser, central locking with remote, trailer coupling, power steering, limited slip differential, spare wheel, twin tires, driver's cab: short distance, electric windows, work lights, crane, new vehicle, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/city/highway), particulate filter, available for rental, fine dust sticker: 4 (green), reversing camera.

Stanje: rabljeno, Leto izdelave: 2025, Overview This rotary counter-pressure filling and seaming machine was manufactured in 2025 by the Italian company Framax. The Cantastic 6000-EP is designed for filling and seaming cans for beer, soft drinks, and alcoholic RTDs. The machine is currently still in operation and can be inspected upon request. Technical data Output: approx. 70 cans/min (500 ml) | approx. 100 cans/min (250 / 330 ml) Formats: 250 ml / 330 ml / 500 ml (standard, slim, and sleek cans) Application: filling and seaming of cans (beer, soft drinks, RTDs) Configuration: 10 filling valves / 2 seaming heads Filling system: counter-pressure filling Filling pressure: approx. 0.15 – 0.4 MPa Filling temperature: approx. 1 – 4°C CO₂ management: pre-cleaning and pre-gassing, oxygen reduction system Seaming system: lid size 202 (200 optional), manual lid feed Control system: Siemens S7-1200 PLC with HMI touchscreen Drive system: frequency converter (Danfoss), unified drive Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h Dimensions: approx. 3,153 × 1,980 × 2,350 mm Weight: approx. 5,500 kg Scope of delivery Filling and seaming monoblock | Framax | Cantastic 6000-EP | Not included | Rotary counter-pressure filler with integrated seamer Control system | Siemens | S7-1200 | Not included | PLC with touchscreen HMI Drive system | Danfoss | Not included | Not included | Frequency converter Filling valve cores | Not included | Not included | Not included | 1 set Seaming rollers | Not included | Not included | Not included | 1 set (No. 1 and No. 2) Seaming chucks | Not included | Not included | Not included | 1 unit Can rim seals | Not included | Not included | Not included | 10 pieces Filling valve seals | Not included | Not included | Not included | 10 sets Iiodpfjzbhi Iex Abxoc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, skupna širina: 1.800 mm, skupna višina: 2.110 mm, skupna masa: 1.500 kg, največja dolžina izdelka: 1.710 mm, Deburring machine from 2007. This Fladder AUT-1000 VAC operates at 3 x 400 V, with a frequency of 50 Hz and a current of 50 A. If you are looking for high-quality deburring solutions, consider the Fladder AUT-1000 VAC machine we have for sale. Please contact us for further details. • Voltage: 3 x 400V • Frequency: 50 Hz • Current: 50 A • Working height: 850 mm • Width of vacuum table: 1000 mm Iijdpfx Abey Tmbhjxoc • Max. workpiece height: 100 mm • Max. workpiece width: 1000 mm • Feed speed: 0.3 - 4 m/min • Standard feed speed: 0.3 - 3.6 m/min • Extraction capacity: 2500 m³/h • Extraction connection: 1x Ø200 mm • Number of spindles: 6 • Spindle length: 350 mm • Number of abrasive flaps: 168 • Main motor power: 7.5 kW • Rotary motor power: 0.37 kW • Oscillation motor power: 0.55 kW • Feed motor power: 1.5 kW • Vacuum turbine motor power: 7.5 kW • Max. fuse: 63 A • Min. fuse: 50 A • Air pressure: 1/4", 6 atm • Throughfeed deburring machine for flat sheet metal parts • Deburring of edges and recesses • Including external vacuum turbine • Special coating: RAL 7035 • Frequency converter: VLT 2807 for external infeed belt • Max. power of external conveyor: 0.75 kW • Including motor-driven conveyor • Conveyor belt dimensions: L = 1000 mm, W = 1010 mm • Roller table at workpiece outfeed • Roller table dimensions: L = 1500 mm, W = 1000 mm • 6 abrasive rollers • Abrasive cylinder length: 350 mm • The extraction cyclone is included, but rusted. It was still in use in this condition.

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 4.250 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A, double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E – Onboard diagnostics Cab color: signal white Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror Exterior sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight range adjustment LED daytime running lights, “V-lights” Front LED fog lights Static LED cornering light Two amber LED beacon lamps, mounted on the front of the cab roof Roof grommets on both sides Wiring for roof-mounted headlights, max. 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Emblems/type identification installed ex works Emission type plate (Euro...) L-plate (low-noise vehicles -96) Flatbed body: Steel/welded construction, fixed-mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, Manufacturer: Suer, height 600 mm, anodized finish, each side (right and left) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulically extendable flatbed section approx. 1200 mm, galvanized, loadable up to 3,000 kg, extendable with lighting and impact guard, recessed as low as possible, operable via radio remote control Robust headboard made of welded frame with recessed stake depot pockets Cladding panels and fenders made of tread plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with tread plate 5 toolboxes, tread plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted and powder-coated, painted in vehicle color. Rear underrun protection and additional supports assembled, with installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double-strand operation with foldable pulley and accessories. Iiedpfx Abox A Nn Texsc Endless slewing range All hydraulic cylinders double-acting Piston rods hard chromed Double linkage system with PROLINK (overbending knuckle arm up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limitation and load-holding valves XF system (Extra Quick) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %), 90% and 100% warning on the display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, skupna širina: 2.550 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 4.250 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and winch Liftable drive axle Iiedpsx A Npdefx Abxsc Liftable axle Drive axle RTS2370A, double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E – Onboard diagnostics Cab color: signal white Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror Exterior sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight range adjustment LED daytime running lights, “V-lights” Front LED fog lights Static LED cornering light Two amber LED beacon lamps, mounted on the front of the cab roof Roof grommets on both sides Wiring for roof-mounted headlights, max. 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Emblems/type identification installed ex works Emission type plate (Euro...) L-plate (low-noise vehicles -96) Flatbed body: Steel/welded construction, fixed-mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, Manufacturer: Suer, height 600 mm, anodized finish, each side (right and left) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulically extendable flatbed section approx. 1200 mm, galvanized, loadable up to 3,000 kg, extendable with lighting and impact guard, recessed as low as possible, operable via radio remote control Robust headboard made of welded frame with recessed stake depot pockets Cladding panels and fenders made of tread plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with tread plate 5 toolboxes, tread plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted and powder-coated, painted in vehicle color. Rear underrun protection and additional supports assembled, with installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double-strand operation with foldable pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard chromed Double linkage system with PROLINK (overbending knuckle arm up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limitation and load-holding valves XF system (Extra Quick) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %), 90% and 100% warning on the display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt