Dürr Ecoclean 44H-Hcs nakup rabljenega (173)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 30 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BV15001314A0, število kartuš s črnilom: 5, barvni kanali: 5, loèitev (maks.): 1.200 DPI (pik na palec), število podajalnih pladnjev: 1, vhodna napetost: 1.200 V, As new QL-300s toner-based 5-color label printer, CMYK plus white. Includes: - Base unit - Standard label unwinder Bedpfsy Efh Rox Agtjwl - 1 complete set of toner cartridges including white (installed in printer) + 1 additional new/vacuum-sealed complete toner set - Fuser unit, transfer belt, and waste toner container - RW-300 label rewinder The label printer is no longer in use. Technical data: Print Technology: Electrophotographic, toner Ink Type: Toner, 4 or 5 individual cartridges (CMYK or with white) Print Resolution: 1,200 x 1,200 dpi / 600 x 600 dpi Print Speed: 6 ips (152 mm/sec), 4 ips (102 mm/sec), or 2.3 ips (58 mm/sec) Print Area: - CONTINUOUS (continuous paper): Width: 0.83" – 4.95" (21.2 mm – 125.8 mm) Length: 0.33" – 51.83" (8.5 mm – 1316.6 mm) - GAP (die-cut label): Width: 0.83" – 4.79" (21.2 mm – 121.8 mm) Length: 0.33" – 51.83" (8.5 mm – 1316.6 mm) - REFLECTIVE (continuous paper, black mark): Width: 0.83" – 4.95" (21.2 mm – 125.8 mm) Length: 0.42" – 51.92" (10.6 mm – 1318.7 mm) Print Position Accuracy: ±0.5 mm Media Sensors: Gap, reflective (black mark, bottom), continuous Cutter: Automatic, 4.0" (102 mm) minimum cut length Control Panel: - Display: Color LCD, 480 x 272 pixels - Keypad: Power, Online, Cancel, Help, Power Save, Menu (Up, Down, OK, Back), Numeric keypad, Feed, Unload - LED indicators: Power, Online, Help, Power Save, Attention Connectivity: High-speed USB 2.0, Gigabit Ethernet Barcodes: Supports all major types, including 2D Datamatrix and QR Code Consumables: - Toner cartridges: QuickLabel QL-300 CMYKW toner cartridges with integrated image drum - Additional supplies: Transfer belt, transfer roller, waste toner box, fuser - Transfer belt / Fuser life: approx. 870,000 linear inches (22,100 m) - Waste toner box life: approx. 290,000 linear inches (7,300 m) - Toner/image drum life (CMYK): approx. 52,000 linear inches (1,320 m) at 20% coverage - Toner/image drum life (W): approx. 26,000 linear inches (660 m) at 20% coverage Media Dimensions: - Thickness: 3.0 – 9.8 mil (0.076 mm – 0.25 mm) - Roll size: 8.0" OD (203 mm), 3" ID (76 mm) core - Types: QuickLabel-approved paper, synthetic label and tag stock Environmental & Physical: - Operating conditions (Printer/Toner): 50°F to 86°F (10°C to 30°C), 20% to 70% RH (non-condensing); 50%–70% RH recommended for optimal print quality - Storage conditions (Printer/Toner): 14°F to 109°F (-10°C to 43°C), 10% to 90% RH (non-condensing) - Noise level: approx. 80dB during printing, 51dB idle (ISO7779) - Power requirements: 110–127 VAC 60Hz / 220–240 VAC 50Hz - Power consumption: Operating: 710W (average); Peak: 1,200W; Idle (powered on): 27W; Power save: 25W - Dimensions: 40.9" L x 18.8" W x 17.4" H (1040 mm x 477 mm x 441 mm) - Weight: 136 lbs (62 kg) with consumables; 183 lbs (83 kg) shipping, two cartons on pallet Compliance: - Safety: CE(CB), EN 55032:2015, EN 61000-6-1:2007, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, EN 62311:2008, EN 50581:2012 - EMC: FCC 47CFR Part 15 Subpart B, CAN ICES-3(A)/NMB-3(A) - Chemical safety: TSCA, OSHA HCS, EU directive - Others: RoHS, REACH, WEEE, EU battery, EU packaging waste Optional Accessories: - RW-300 automatic label roll rewinder

Stanje: novo, Lot of electrical components from warehouse clearance comprising: - 1,650 pcs. Hellermann Tyton Signholders HC 09-35 - 450 pcs. Hellermann Tyton Signholders HC 12-52 - 12 pcs. Hager Isolator Switches SH 463N 4P/63A/400V - 40 pcs. Arle Room Temperature Controller RTBSB-001.910 / K-5 - 9 pcs. Hager Busbar KDN 163A 10mm² Bwedpfx Ajn D Ebhogtjl - 28 pcs. Krone Bridge - 20 pcs. Krone Plus Terminal Strip - 510 pcs. 3M UY Single Wire Connectors - 120 pcs. Neozid Sleeve Adapter 16A E18 - 16 pcs. Neozid Sleeve Adapter 10A E14 - 103 pcs. Neozid Sleeve Adapter 50A E18 - 76 pcs. Neozid Sleeve Adapter 20A E18 - 7 pcs. Neozid Sleeve Adapter 25A E18 - 374 pcs. Crimp Cable Lugs M6 4-6mm² - 3 pcs. CBI Circuit Breaker 6A - 3 pcs. CBI Circuit Breaker 80A - 208 pcs. Ferrules 35mm², red - 92 pcs. WAGO Terminal Block 3 x 6mm² - 65 pcs. Neozid Fuse Link 500V 20A E18 - 6 pcs. Neozid Fuse Link 500V 25A E18 - 41 pcs. Neozid Fuse Link 500V 63A E18 - 24 pcs. Neozid Fuse Link 50A - 12 pcs. Neozid Fuse Link 16A - 70 pcs. Neozid Fuse Link 10A - 1 pc. AEG Single-phase Energy Meter - 8 pcs. Heliowatt Single-phase Energy Meter - 8 pcs. DZG Single-phase Energy Meter - 9 pcs. PFN Single-phase Energy Meter - 103 pcs. Neozid Screw Cap 16A E14 - 106 pcs. Neozid Screw Cap 63A E18 - 50 pcs. OBO Mounting Brackets 2031/15 - 84 pcs. Potential Equalization Rail PAS 11 AK/12 with Clip-on Terminals - 429 pcs. SKINTOP Locknuts M32 x 1.5 - 313 pcs. SKINTOP Locknuts M16 x 1.5 - 188 pcs. SKINTOP Locknuts M20 x 1.5 - 149 pcs. SKINTOP Locknuts M25 x 1.5 - 125 pcs. SKINTOP Locknuts M40 x 1.5 - 39 pcs. NEWLEC Cable Gland HKV M4001 / M40 x 1.5 - 17 pcs. Wiska ESKV Gland M50 x 1.5 - 204 pcs. SKINTOP Cable Gland M16 x 1.5 - 32 pcs. Wiska Cable Gland 6–13mm IP68 - 4 pcs. Spelsberg AKL2-g Empty Enclosure with Cover 300 x 300 x 132mm - 9 pcs. HENSEL DK 0202G Cable Junction Box - 23 pcs. HENSEL Junction Box K9100 - 11 pcs. RITTAL Wiring Diagram Pocket Internal Ref.: 5 The lot will be packed in a wooden crate.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 06/2000, skupna širina: 2.550 mm, vzmetenje: drugo, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 8.850 mm, Leto izdelave: 2000, Oprema: ABS, = Further Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Drum brakes - Central lubrication system = Notes = Contar 40FT HC swap body chassis, year of manufacture 2000, rear extendable to 45 feet (extension not functional), SAF axles with drum brakes, front section 1x 40 (45) FT HC / 2x 20 feet, first axle is a lift axle, central lubrication, unladen weight: 5,280 kg, permissible total weight: 39,000 kg, ABS / EBS, tyres 385/65-R22.5 (L: 8/7/7 mm; R: 7/9/9 mm), Dutch registration with valid technical inspection (APK) until 04.02.2026 = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: Drum brakes Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 55%; Suspension: air suspension Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 25%; Tyre tread right: 20%; Suspension: hydraulic suspension Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 5%; Tyre tread right: 5%; Suspension: air suspension Weights Unladen weight: 5,280 kg Payload: 33,720 kg GVW: 39,000 kg Functional Body brand: Contar B 1227 LC 4422G Extendable body: Yes Bwedpfx Agsx R Szbetol Condition Technical condition: good Visual condition: good Identification Registration number: OG-17-HZ Further information Please contact Arne Honingh for more information.

Stanje: novo, Količina: 4-5 kosov. Na prodaj je paket obojestranskih rezalnih ploščic Wohlhaupter. F05-HC-P25-M15-K15-R0,5 – 4,5 pakiranj, glejte slike. Bedpfx Agox Srz Retewl

Stanje: novo, Količina 4 kosi. Naprodaj je paket obojestranskih rezilnih ploščic Wohlhaupter. F02-HC-P25-M15-K15-R0,3 - 4 pakiranja. Bodpfex Sr Absx Agtjwl

Stanje: novo, Količina: 5 kosov Na prodaj je paket obojestranskih rezilnih ploščic Wohlhaupter. Bwjdsx Srzkopfx Agtol F04-HC-P25-M15-K15-R0,5 - 5x pakiranj.

Stanje: novo, Količina: 3 kosi. Na prodaj je paket obojestranskih rezilnih ploščic Wohlhaupter. F103-HC-P30-K10-R0,4 – 3 pakiranja. Bwodpox Sr Anefx Agtsl

Stanje: rabljeno, Plate Rolling Machine Brand: JAMMES PROMECAM Model: HC 1310 Maximum thickness: 10 mm Maximum working length: 3040 mm Rolling capacity over 1500 mm: 15 mm Upper roll diameter: 300 mm Bjdpfx Agswf Ndijtswl Side roll diameter: 220 mm Working speed: 0 to 7 m/min Hydraulic control Main motor: 1 HP Hydraulic power unit motor: 5.5 kW Weight: 7000 kg Dimensions: 5100 x 1000 x 1000 mm 4-roll initial pinch type

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 06/2000, skupna dolžina: 12.690 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 8.860 mm, Leto izdelave: 2000, Oprema: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Drum brakes - Central lubrication system = Notes = Contar 40FT HC swap body chassis, year of manufacture 2000, rear extendable to 45 feet (not functional), SAF axles with drum brakes, front: 1x 40 (45) FT HC / 2x 20 feet, first axle is a lift axle, central lubrication system, unladen weight: 5,280 kg, permissible total weight: 39,000 kg, ABS/EBS, tires 385/65-R22.5 (L: 8/7/7 mm; R: 7/9/9 mm), Dutch registration with valid technical inspection (APK) until 17.02.2026 = Further Information = Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; tire tread left: 50%; tire tread right: 45% Rear axle 2: Max. axle load: 9,000 kg; tire tread left: 45%; tire tread right: 55% Rear axle 3: Max. axle load: 9,000 kg; tire tread left: 45%; tire tread right: 55% Weights Unladen weight: 5,280 kg Payload: 33,720 kg Gross vehicle weight: 39,000 kg Functionality Body brand: Contar B 1227 LC 4422G Extendable body: Yes Condition Bwsdpexvy Nuefx Agtjl Technical condition: good Optical condition: good Identification Registration number: OG-35-HX Additional information Please contact Arne Honingh for further details.

Leto izdelave: 2024, obratovalne ure: 32 h, stanje: novo, Manufacturer: DURMA Model: AD-S 30175 Year of manufacture: 2020* Bending length: 3050 mm Pressing force: 1750 kN Control system: DELEM DA-66T Operating hours: 32 h Backgauge controlled axes: X, R, Z1, Z2, +Delta X +/-125 mm, CNC controlled Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Bododx Nluspfx Agtewl Table width: 104 mm Table height: 900 mm Throat depth: 410 mm X-axis travel: 650 mm X-axis travel speed: 500 mm/s R-axis travel: 250 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 100 mm/s Dimensions (L/W/H): approx. 4250 x 1700 x 2750 mm Weight: approx. 11,500 kg Standard equipment: Y1, Y2, X, R – X=650 mm Control system: CNC Cybelec ModEva 19T – PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation software CNC-controlled motorized crowning European style tool clamping system 60 mm die holder (suitable only for European style dies) Throat depth 410 mm 2 front support arms with T-slot and tilting stop, movable from the front Backgauge system: Siemens DC servo motorized with linear guide and ball screw Safety covers CE marking Extended equipment: Safety system in compliance with CE standard for EU: FIESSLER AKAS-3P motorized + FPSC (SAFETY PLC) Backgauge controlled axes: X, R, Z1, Z2, +Delta X +/-125 mm CNC controlled Control system: DELEM DA-66T Hydraulic upper tool clamping Wila NSCL-II-HC/UPB – PREMIUM – 250 t/m Hydraulic lower tool clamping Wila NSCR-II-HC-CNC/UPB – PREMIUM – 300 t/m Powerpack for hydraulic clamping AP3-AP4 bending aids, motorized height adjustment – max. load capacity 125 kg per unit Oil cooler This machine is manufactured to customer specifications. Further machines are available for demonstration at our Staufenberg facility. Further information is available upon request.

Leto izdelave: 2024, stanje: novo, Manufacturer: DURMA Model: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Clearance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Throat depth: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis return speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 mm Motor power: 37 kW Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25,000 kg Standard equipment Control unit: CNC Cybelec ModEva 19T CNC-controlled motorized crowning system European tool clamping system, or Durma clamping system upon customer request Extended equipment: Safety system according to CE standard for the EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Backgauge controlled axes: X1, X2, R1, R2, Z1, Z2 Controller: DELEM DA-66T Choice of Delem 66T – 69T or Durma controller DAM – Durma angle measuring system Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation software AP3 & AP4 bending aids Selectable from 750 mm to 1500 mm Parking area for support arms (1000 mm) TANDEM setup preparation Laser bending line Oil heating Centralized lubrication, manual or motorized Bwjdpfjd Hy Huex Agtol Cabinet air conditioning Other machines are available for demonstration at our site in Staufenberg. Further information available upon request.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, 20-NOGI HIGH CUBE (HC), SKORAJ NOV, ENA POMORSKA POT ✍️ Dimenzije Zunanje: 6.058 x 2.438 x 2.896 mm (D x Š x V) Notranje: 5.898 x 2.352 x 2.690 mm (D x Š x V) Vrata: 2.338 x 2.585 mm (Š x V) ✏️ Barve: RAL7016 ⚙️ Oprema: Lesena tla Lock Box (zaščita za dragocene tovore) Žepi za viličarja Bodpoy Dfzusfx Agtowl Vetrotesen in vodotesen 5 let veljaven CSC certifikat (primerljivo s "TÜV") ⤴️ Dodatne storitve na zahtevo: Individualne prilagoditve, kot npr. predelave, prebarvanje ipd. možno ⚡️ Hitra dostava, tudi z raztovarjanjem Za nezavezujočo ponudbo navedite poštno številko _____ ✅ Z veseljem vam pripravimo ponudbo po meri.

Stanje: rabljeno, Leto izdelave: 2003, Liebherr stolpni žerjav 420 EC-H 16 Litronic – 75 m dosega, 16 t nosilnosti Velik zgornje-vrteči stolpni žerjav z Litronic krmiljenjem, ponujen z segmenti stolpa brez spodnjega okvirja. Proizvajalec: Liebherr Model: 420 EC-H 16 Litronic Leto izdelave: 2003 Serijska številka: 43.274 Doseg: 75,0 m Maksimalna nosilnost: 16.000 kg Nosilnost pri 75 m: 3.200 kg Sistem stolpa: 500 HC Višina stolpa: 30,0 m Konfiguracija stolpa: 5 x 5,80 m Dostop: poševna ali ravna lestev Krmiljenje: Liebherr Litronic Frekvenčni pretvornik: vključen Dvigalo: 65 kW FU Hitrost dviganja: brezstopenjsko do pribl. 85 m/min Vrtljivi pogon: frekvenčno reguliran Voziček: frekvenčno reguliran Bedpfoyy Nndjx Agtjwl Izvedba: zgornji žerjav s stolpom (brez spodnjega podstavka) Doseg in dvižne višine razširljive po podatkih proizvajalca.

Stanje: rabljeno, Leto izdelave: 2003, Liebherr stolpni žerjav 420 EC-H 16 Litronic – 75 m doseg, 16 t nosilnost; 43.273 Velik zgornji stolpni žerjav z Litronic krmiljenjem, ponuja se kompleten s stolpnimi sekcijami, brez podvozja. Proizvajalec: Liebherr Model: 420 EC-H 16 Litronic Leto izdelave: 2003 Serijska številka: 43.273 Doseg: 75,0 m Maksimalna nosilnost: 16.000 kg Nosilnost pri 75 m: 3.200 kg Stolpni sistem: 500 HC Višina stolpa: 30,0 m Konfiguracija stolpa: 5 x 5,80 m Dostop: poševne ali ravne lestve Krmiljenje: Litronic Frekvenčni pretvornik: vgrajen Bwedeyy Nmtspfx Agtol Moč dvigalnega pogona: 65 kW FU Hitrost dviganja: brezstopenjsko do pribl. 85 m/min Izvedba: zgornji žerjav s stolpom (brez podvozja) Izbritje in višino dviga je mogoče povečati!

Stanje: rabljeno, prevoženi kilometri: 139.050 km, moč: 75 kW (101,97 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, skupna masa: 3.500 kg, prva registracija: 12/2021, emisijski razred: Euro 6, barva: bela, število sedežev: 3, skupna dolžina: 5.986 mm, skupna širina: 2.040 mm, skupna višina: 2.590 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, Internal vehicle no.: 2492X ----Why autonext GmbH?---- One of the largest commercial vehicle exhibitions nationwide — always over 400 vehicles immediately available. Largest selection - Best price. More than 1,000 satisfied customers per year - Top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% APR ### ----1st owner, German vehicle, non-smoking vehicle Full service history exclusively at Volkswagen Disability conversion Wheelchair lift "AMF Bruns" max. 400 kg Stretcher "Stollenwerk" max. 250 kg Carry chair "Utila" ALS 328 Step/entry plate Climatic air conditioning Reversing camera Front and rear parking sensors Cruise control Driver and front passenger seat heated Rail system Upon request, we offer trailer hitch retrofit for only €599, and if possible, also a towing capacity upgrade up to 3.5t. ---- Optional equipment: * Audio system Composition Colour (Radio / SD card interface / USB) * Multimedia interface 2 x USB (Type C) front * Mobile phone interface Bluetooth * Mobile online services App-Connect * Lockable glove compartment Bwodpfx Ageyz H Abjtjl * Window package * Windows in cargo/passenger compartment: - fixed, front left * Windows in cargo/passenger compartment: - fixed, front right * Windows in cargo/passenger compartment: - fixed, rear left * Windows in cargo/passenger compartment: - fixed, rear right * Rear wing doors with glazing * Interior mirror, auto-dimming * Climatic air conditioning (cab) with second evaporator * Storage package * Storage: DIN slot front under headliner * Interior lighting in cab: reading light front * Additional evaporator * Rain sensor * Automatic headlight control * Light assistant (Coming Home, Leaving Home) * Mud flaps front and rear * Mud flaps front * Mud flaps rear * Winter package * Headlight cleaning system (HCS) with heated washer nozzles and washer fluid level indicator * Heated washer nozzles and washer fluid level indicator * Washer fluid level indicator * Heated windscreen * Auxiliary heater (air) * Additional heat exchanger and evaporator * Additional heat exchanger * Driver/front passenger airbag, passenger airbag deactivatable * Exterior mirrors electrically adjustable and heated * Roof lining * Driver assistance system: front and rear parking sensors * Vehicle without load compartment partition * Cruise control system including speed limiter * Multifunction steering wheel * Emergency call system * Digital radio reception (DAB+) * Reversing camera * Hinges for rear doors with enlarged opening angle * Upholstery: artificial leather * Cab seats: Comfort passenger seat * Cab seats: heated driver and passenger seats * Cab seats: comfort driver's seat * Front left door hinges reinforced * Rear tinted glazing * Half-height plastic paneling in cargo/passenger compartment * Seat belt warning system (driver/passenger side) Standard equipment: Anti-lock braking system (ABS), Drive type: front-wheel drive, Exterior mirror convex, left, Exterior mirror convex, right, LED indicators integrated in exterior mirrors, Floor covering in cab: rubber, On-board tools, Underbody drag coefficient panel, Twin headlights, Grab handle on rear left C-pillar, Grab handle on rear right C-pillar, Electronic stability program (ESP), Driver assistance system: hill-start assist, Driver assistance sys... (continues)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, število osi: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled, servo-electric system with Y1/Y2, X, and R axes and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety devices compliant with European regulations. This SAFAN Darley E-Brake Premium press brake is ideal for precise bending operations. Contact us for further information about this machine. • Control and Software: • EC10 control with split-screen on a height-adjustable swivel arm • SafanDarley EC control with centrally mounted swivel arm (operation from both sides) • Display for DWG, DXF, PDF, JPG, PNG, BMP, WMV • German-language manual and HMI • EC20 software package for EC10 split-screen including EC Profiler with 2D bending simulation • Automatic bending sequence calculation and graphical display for AutoPol and Radan files • Axes and Travel Paths: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (type G) with programmable independent side adjustment of the backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Increased installation depth Q = 650 mm, stroke 300 mm • Tooling and Clamping: • NSCL-II HC Premium upper tool holder with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium clamping table with adjustment wedge, hydraulic clamping, hardened surface • Clamping table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement on Z1 backgauge finger • Safety and Lighting: • CNC-programmable safety light curtain • Safety equipment according to EU Machinery Directive MRL/2006/42/EC • Front workspace lighting and rear tool lighting • Ergonomics (machine-integrated): • Ergonomics package: lower beam with legroom and inclined footrest • Foot pedal usable on the footrest or on the floor • Identification and Logistics: • Customs tariff number: 8462 2110 • Weight of the main machine: 3250 kg; Dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment Bwedpfx Aox Np Ehogtel • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on castors • Left-side material cabinet with five height-adjustable shelves • Tools optionally available: 1. Hemming upper tool 2. Hemming punch 3. 84° die

Stanje: novo, Leto izdelave: 2024, Press Brake AD-S 40220 | 4 Meters 220 Tons Fully configurable upon request, with very short production and delivery times. Further information available upon request. Technical Data: • Bending capacity: 220 tons • Bending length (mm): 4050 • Distance between uprights (mm): 3600 • Stroke (mm): 265 • Installation height (mm): 530 • Throat depth (mm): 410 • Table height (mm): 900 • Table width (mm): 104 • Y-axis rapid traverse (mm/sec): 160 • Y-axis working speed (mm/sec): 10 • Y-axis return speed (mm/sec): 140 • X-axis working speed (mm/sec): 250 • R-axis working speed (mm/sec): 140 • R-axis travel: 250 • X-axis distance (mm): 650 • Motor power: 22 kW • Length: 5250 mm • Width: 1770 mm • Height: 2900 mm • Weight: 14,750 kg Standard Equipment • CNC control: Cybelec ModEva 19T • CNC-controlled motorized crowning • European tool clamping system / or optional DURMA clamping system Extended Equipment: • CE-compliant safety system for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) • Controlled axes for backgauge: X1, X2, R1, R2, Z1, Z2 • Control: DELEM DA-66T • DELEM 66T – 69T or DURMA control selectable • DAM – Durma angle measurement system • Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m • Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO • Hydraulic clamping power pack • D-BEND 3D CAD/CAM import & simulation software • AP3 & AP4 bending aids • 750 mm to 1500 mm selectable • Parking area for support arms (1000 mm) • Tandem preparation • Laser bending line • Oil heater • Central lubrication, manual or motorized • Air conditioning for control cabinet Bwodpfx Asfirx Dogtel

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 09/2007, skupna dolžina: 12.530 mm, skupna širina: 2.490 mm, vzmetenje: zrak, velikost pnevmatike: 435/50-R22.5, medosna razdalja: 9.910 mm, Leto izdelave: 2007, Oprema: ABS, = Further Options and Accessories = - ADR - BPW axles - EBS - Lift axle - Air suspension - Disc brakes - Central lubrication = Notes = Nice 09/2007 PACTON TXC348 container chassis with ABS/EBS, BPW Eco-Plus axles with disc brakes (3 x 10,000 kg), 1st axle = lift axle, 3rd axle = steering axle (longitudinal control arm), extendable front head and rear bumper (need to be smoothed), ADR (EX/II, EX/III, FL, AT) valid until 13.09.2026, suitable for 2 x 20 ft / 1 x 20 ft central / 1 x 30 ft / 1 x 40 ft HC / 1 x 45 ft HC containers, unladen weight: 6,300 kg, gross vehicle weight: 48,000 kg, tires: 435/50-R22.5 (tread left: 12/7/8 mm; tread right: 5/4/0 mm), Dutch registration with valid main inspection (APK) until 13 September 2026 = Further Information = Axle configuration Tire size: 435/50-R22.5 Axle brand: BPW Eco-Plus Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 10,000 kg; Tire tread left: 75%; Tire tread right: 30% Bwodpfxsyttu Ho Agtol Rear axle 2: Max. axle load: 10,000 kg; Tire tread left: 45%; Tire tread right: 25% Rear axle 3: Max. axle load: 10,000 kg; Steering; Tire tread left: 50%; Tire tread right: 25% Weights Unladen weight: 6,300 kg Payload: 41,700 kg Gross vehicle weight: 48,000 kg Functional Body make: PACTON TXC348 Maintenance, history and condition APK (Dutch MOT): valid until 09/2026 Technical condition: very good Visual condition: very good Identification Registration number: OJ-02-ZR Further Information For more information, please contact Arne Honingh.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 09/2007, skupna dolžina: 12.530 mm, skupna širina: 2.490 mm, medosna razdalja: 9.910 mm, Leto izdelave: 2007, Oprema: ABS, = Additional Options and Equipment = - ADR - BPW axles - EBS - Lift axle - Air suspension - Disc brakes = Notes = Attractive 09/200PACTON TXC348 container chassis with ABS/EBS, BPW Eco-Plus axles with disc brakes (3 x 10,000 kg), 1st axle = lift axle, 3rd axle = steering axle (trailing), extendable front head + bumpers (require smoothing), ADR (EX/II, EX/III, FL, AT) valid until 17.09.2026, suitable for 2 x 20 ft / 1 x 20 ft center / 1 x 30 ft / 1 x 40 ft HC / 1 x 45 ft HC containers, unladen weight: 6,300 kg, gross vehicle weight: 48,000 kg, tire size 435/50-R22.5 (tread left: 7/9/10 mm; tread right: 7/6/10 mm), registration with valid technical inspection (APK) until 17.09.2026 = Further Information = General Information Applications: Recycling and road construction Registration number: OJ-95-ZP Axle Configuration Rear axle 1: Lift axle; max. axle load: 10,000 kg Rear axle 2: max. axle load: 10,000 kg Rear axle 3: max. axle load: 10,000 kg; steered Weights Bsdpfx Agjytr Tnetjwl Unladen weight: 6,300 kg Payload: 41,700 kg gross vehicle weight: 48,000 kg Functionality Body manufacturer: PACTON TXC348 Maintenance, history and condition APK (technical inspection): valid until 09.2026 Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further information.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 5.381 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AS0211, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 180 mm, pomik osi Y: 90 mm, pomik po osi Z: 704 mm, model krmilnika: FANUC SERIES 31 i-MODEL A, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS TRAVELS X1 axis: 180 mm X2 axis: 180 mm Y1 axis: ±45 mm Z1 axis: 704 mm Z2 axis: 620 mm E2 axis: 720 mm Rapid traverse (X / Y / Z axis): 30 m/min SPINDLE 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Bwodeym Ai Hjpfx Agtsl Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed driven tools: 8,000 rpm Number of tool turret 1 positions: 12 Number of tool turret 2 positions: 10 All tool stations driven MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Tool holders (as shown in the photos, included in the scope of delivery) External reference: Dürr

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 39.000 h, potovalna razdalja osi X: 500 mm, pomik osi Y: 420 mm, pomik po osi Z: 380 mm, skupna višina: 5.600 mm, skupna dolžina: 9.000 mm, skupna masa: 6.000 kg, model krmilnika: Heidenhain Mill Plus IT, For sale is a 5-axis machining center by DMU, model 50 eVolution. Special features include the GMN high-frequency spindle HCS 30,000/15 and the 92-position tool changer. The machine is in good condition and fully operational. Technical Data: Year of manufacture: 2004 Operating hours: approx. 39,000 h Control: Heidenhain MillPlus IT Table size: approx. 500 mm ⌀ Bodpfjtyit Eex Agtowl Travel: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0–180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool positions: 92 NO chip conveyor Space requirements according to drawing: 9,000 × 5,600 mm Transport dimensions: 2,800 × 3,700 × 2,800 mm Weight: 6,000 kg Transport and loading can be organized across Europe for an additional fee upon request. Prices are subject to VAT. Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machine Purchasing & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Fzho0bc Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or to get in touch, please visit our website.

Stanje: zelo dobro (rabljeno), dvižna višina: 11.000 mm, Leto izdelave: 2017, obratovalne ure: 1.888 h, Teža Lastna teža: 1.885 kg Funkcionalno Dvižna zmogljivost: 1.200 kg CE oznaka: da Bedpfjyg Egnex Agtswl Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Dobavni pogoji: EXW Transportne dimenzije (D x Š x V): 2,79 x 0,775 x 1,6 m Zadnji pregled: 2025-05-12 Država izdelave: IT Dodatne informacije Za več informacij kontaktirajte Vink Machinery. = Dodatne možnosti in oprema = - Podnožni dvig = Opombe = Jekko SPX 312 HC+ * Leto izdelave: 2017 * Akumulator, pogon na 230 V * 1888 delovnih ur * Daljinsko upravljanje * Delovna višina: 11 metrov * Horizontalni doseg: 9,5 metra * Nosilnost: 1.200 kg * Izmetna roka: JIB400.1MX * Hidravlično nastavljive gosenice * Neto teža: 1.885 kg * Vključno z dokumentacijo in dnevnikom žerjava

Stanje: rabljeno, Leto izdelave: 2006, HORIZON VAC-60Ha / Hm / Hc Collating Towers The HORIZON VAC-60 series (Ha, Hm, Hc) are modular collating towers designed for professional print finishing – precise, fast, and reliable paper handling. Key Features: Modular System: Each tower offers 6 feeding stations; expandable up to 6 towers (36 stations in total). Advanced Suction Air Technology: Ensures reliable paper feed with various formats and paper weights. Flexible Format Range: Handles sheets from approx. 120 × 148 mm to 500 × 350 mm with 40–300 gsm. High Productivity: Up to 9,500–10,000 sets per hour – depending on format and configuration. User-Friendly: Ha and Hc models feature "Touch & Work" technology for simple setup and operation. Easy System Expansion: Hm model can be integrated as an add-on module without its own control unit. Error Control: Sensors for mis-feed, double-feed, and jam detection ensure high process reliability. Job Memory: Up to 9 memory slots for repeat jobs. Technical Specifications Dimensions: approx. 842 × 652 × 1,961 mm Weight: about 310–315 kg Bsdjylkw Ajpfx Agtowl Power Supply: 230V, 50/60Hz, 1.86 kW Stack Height: 130 mm per station All-Inclusive Service Package We take care of everything: from secure packaging and transport to customs clearance. On request, we can also provide a tailored leasing offer. Sustainable and Cost-Effective Choose a pre-owned machine and benefit twice: save both the environment and your budget. Despite possible signs of use, you receive a quality product at a very attractive price.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 03/2013, skupna širina: 2.470 mm, skupna višina: 1.520 mm, barva: črn, Leto izdelave: 2013, Oprema: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Disc brakes = Remarks = Attractive 2013 D-TEC FLEXITRAILER 45FT high cube swap body chassis with SAF axles, equipped with disc brakes, ABS/EBS, 1st axle = lift axle, extendable twice (center and rear) + fixed front, compatible with 1x20FT, 2x20FT, 1x20FT center, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC, unladen weight: 5,140 kg, permitted gross weight: 43,000 kg, tires 385/65-R22.5 (R: 6/4/4 mm; R: 6/6/5 mm), Dutch registration with valid roadworthiness inspection (APK) until 26.10.2026, 2 units available = Additional Information = Axle Configuration Rear axle 1: Lift axle; max axle load: 9,000 kg Rear axle 2: max axle load: 9,000 kg Rear axle 3: max axle load: 9,000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg gross vehicle weight: 43,000 kg Functional Body manufacturer: D-TEC FLEXITRAILER Bwsdpjx T Di Nsfx Agtsl Extendable body: Yes Inspection, history and condition APK (roadworthiness inspection): valid until 10/2026 Technical condition: very good Optical condition: very good Identification Registration number: OX-40-BN Further information Please contact Arne Honingh for more information.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Ref: 11080. 2022 Horizon CABS 4000-VF EVA-linija Odlično stanje! Proizvedeno le 985.000 knjig! 'Računalniško podprt sistem vezave', zasnovan za vezavo po naročilu. ‘V’ = Variabilna, vezava po naročilu ‘F’ = Samodejno podajanje ovitkov z zavihki Komplet vključuje: (2020) Tecnograf ‘MettaLibro’ podajalnik knjižnih blokov SB-09VF variabilni vezalni stroj z ročno podajalno postajo in 9 sponkami LCD operacijska konzola za različne funkcije/nastavitve ‘PX-Core’ centralni krmilni računalniški sistem SI-15 senzor knjižnega bloka za samodejne nastavitve sistema in hitro pripravo na format/debelino knjige S-09S samodejna podajalna enota Samodejne nastavitve biganja in registriranja ovitkov iz podatkovnega vnosa Postaja za grobo brušenje z DB-15 sesalno enoto za mletje PM-20II EVA pretopni enota za vroče lepilo MU-09 EVA enota za hrbtno lepljenje z bočnimi lepilnimi diski Rotacijski podajalnik ovitkov s prepoznavo dvojnega lista LD-09 transportni trak za izhod knjig PP-101 predzlagalna enota s približno 9 m trakom do: HT-110 samodejni tristranski rezalnik HC-110 ročni transportni trak za samostojno uporabo rezalnika LCD operacijska konzola za različne funkcije/nastavitve Bwedpfx Asy Awcbsgtol Enota za hitro nastavljanje formata/debeline knjige Enota za odsesavanje prahu Izvozničev valjčni transporter Vključuje orodje, dodatke in dokumentacijo. Tehnične specifikacije: Vezalni stroj – format knjige: maks.: 400 x 330 mm (ročni vnos) pokončno Maks.: 330 x 250 mm (samodejno) Min.: 148 x 105 mm Maks.: 330 x 320 mm ležeče Min.: 135 x 185 mm Debelina knjige: 1 – 45 mm Format odprtega ovitka: maks.: 400 x 660 mm min.: 135 x 220 mm Rezalnik, velikosti knjig: maks.: 330 x 330 mm neodrezano maks.: 300 x 300 mm obrezano Mehanska hitrost: maks. 4.000 ciklov/uro (samodejno)