Anlagenbau Günther Multistar One / Ms One nakup rabljenega (14.180)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Inventarna št.: 503657 Tip stroja/opreme: Naprava za regulacijo vročih kanalov Lhsdpexx Tmrofx Al Njf Proizvajalec: Günther Tip: DPT 5 Leto izdelave: 2017 Priključne vrednosti: Napetost na priključku: na fazo 200–250 V AC, 50 do 60 Hz, tipična zvezdna vezava Zvezdna vezava: 3-fazno omrežje z ničlo, 200–250 V med L in N Trikotna vezava: 3-fazno omrežje brez ničle, 200–250 V med dvema fazama Priključek bremena: IOA na kanal (varovalko 10A zelo hitra = FF 10A) ter po en kanal na fazo z 16A (glej največjo obremenitev faze!). Obremenitev faze (5 kanalov na fazo): največ 25A Zaščitni razred: IP 20 Dimenzije (Š x V x G): 468 mm x 142 mm x 345 mm Teža: 13,0 kg Barva ohišja: siva/modra (RAL 9018 / RAL 5015)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine/Device Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical Star connection: 3-phase network with neutral, 200–250 V between L and N Delta connection: 3-phase network without neutral, 200–250 V between two phases LOAD CONNECTION 16A per channel (fuse 16A super rapid “FF 16A”) Phase load: max. 32A Phase L1: channels 1–6, 19–24 Phase L2: channels 7–12 Phase L3: channels 13–18 MAXIMUM OUTPUT DPT 6: 7.3 kW (1 x 32A) TYPE OF LOAD Only resistive loads permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free NO contact (max. 230V/1A, not fused) LOWERING INPUT Connection for a potential-free NO contact MAINS CABLE CEE plug 32A (prepared for star wiring) HOT RUNNER CONNECTION Power connection: 2 x 24-pin HAN-E socket connectors Thermo connection: 2 x 24-pin HAN-E pin connectors FUSES Load output fuse: FF 16A, 6.3 x 32mm, type Schurter SA Control fuse slow blow 2A, 5 x 20mm INTERFACES RS232, TTY (RS422, RS485) Interface protocols for Arburg, Mannesmann, Krauss-Maffei, Engel, and others available. OUTPUT Continuous via pulse group controller CONTROL RANGE Adjustable from 0–700°C / 0–999°F LOWERING Adjustable from 0–200°C / 0–360°F Ljdpfxexx Ti Tj Al Nshf BOOST Adjustable from 0–100°C / 0–180°F SAFETY SHUTDOWN Adjustable from 0–700°C / 0–999°F DATA BACKUP Power failure safe, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C AIR HUMIDITY Storage: 30% – 80%, non-condensing Operation: 40% – 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (WxHxD) 362mm x 180mm x x mm Approx. 16.0 kg HOUSING COLOR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Leto izdelave: 2024, stanje: novo, - 150 mm feed height - 430 mm feed width Lsdpfx Asful Uiol Nohf - 30 mm chip length - 2 chopping knives + 1 counter knife - 440 mm rotor diameter - 590 rpm rotor speed - 30 m/min feed rate - 37 kW main motor - 3 kW and 2.2 kW infeed rollers - 6,000 mm long infeed conveyor belt - 2,000 mm long discharge conveyor belt underneath the machine

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, • 350 mm maximum cutting height • 75-250 mm minimum/maximum cutting width • 100 – 350 mm minimum/maximum round timber diameter • 18-80 mm side board width • 1.8 – 6 m cutting length • 550 mm saw blade diameter • 4/6 simultaneous saw cuts • 5-30 m/min variable feed speed • 2 x 30 kW and 2 x 22 kW saw motors • 3 kW SEW feed gearbox motor • Automatic 6-position width adjustment Lhsdpfx Alohkh Npj Nsf • Infeed table with 3-way turning device • 2 pairs of centering rollers with pneumatic pressure • Powered infeed roller with 0.75 kW motor and pneumatic pressure • 2 pairs of powered outfeed rollers, each with 0.55 kW motor • 4 pairs of pneumatic pressure rollers in outfeed

Stanje: novo, Leto izdelave: 2024, Maximum cutting height: 160 mm Maximum cutting width: 600 mm Lhedpfxsu I Dme Al Nef Feed rate: 5-30 m/min Saw motor: 37 kW (higher kW optional) Feed motor: 2.2 kW Maximum number of saw blades at 145 mm: 6 Saw spindle diameter: 70 mm Weight: 3,200 kg Special equipment: - Electric height adjustment of infeed rollers - Laser with alignment adjustment - Powered roller conveyors - Electronic braking system

Leto izdelave: 2024, stanje: novo, - 6,000 mm cutting length - Minimum cutting length 600 mm - 5 saw supports - Cutting height 80 - 140 mm - 4 kW saw motor Lhedopfcgaopfx Al Nef - 1.5 kW variable feed 10-30 m/min Optional: - Disposal conveyor belts

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, - 340 mm cutting height - 70–250 mm maximum cutting width - 500 mm pass-through width - 6000 mm feed length Lodpfxohkh N To Al Njhf - 3–20 m/min feed speed - 2 x 30 kW saw motors - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight

Leto izdelave: 2024, stanje: novo, - 4 singulation stages - Log length on request - Log diameter on request - Discharge height on request Lhedpfepfaubjx Al Nsf - 5.5 kW SEW geared motor - R127 SEW gearbox

Leto izdelave: 2024, stanje: novo, - 160 mm cutting height - 750 mm maximum cutting width Lodpfjbrq Ndex Al Nshf - 5–50 (100) m/min stepless feed speed - 37–110 kW saw motor - 75 mm saw shaft diameter - 30–500 mm min/max edging width - 2 adjustable saw guides

Leto izdelave: 2024, stanje: novo, - 10,000 mm standard length - 800 mm standard roller width - 2.2 kW roller conveyor drive - 0.75 kW feed roller drive Lhodpfsbrq R Dex Al Nof - pneumatic roller lifting - pneumatic centering

Leto izdelave: 2024, stanje: novo, - 8000 mm standard length - 800 mm roller width - 1.5 kW drive gear motor Lhedjbu Sb Depfx Al Nsf - 0.75 kW cross transport drive

Leto izdelave: 2024, stanje: novo, Round timber cross conveyor Ledpfx Alehmp Ibs Nehf - Number of chain strands according to customer specifications - Length and width according to customer specifications - Heavy-duty SEW geared motors - Solid pin conveyor chain with protective rollers

Leto izdelave: 2024, stanje: novo, • Chopping height: 240 mm • Chopping width: 540 mm • Chopping length: approx. 25–35 mm Lsdpfx Alsnyidbe Nehf • Number of chopping knives: 2 • Rotor diameter: 600 mm • Rotor speed: 590 rpm • Feed motors: 4 + 3 kW • Main motor: 45 kW / 55 kW / 75 kW • 6,000 mm infeed conveyor • 2,000 mm discharge conveyor beneath the machine

Leto izdelave: 2024, stanje: novo, max. cutting height - ø 340 mm min./max. cutting width: 80 - 250 mm min./max. side board: 18 - 80 mm Ledpfxsu Izko Al Nshf max. cutting length: 6,000 mm feed rate: 5 - 30 m/min saw motors: 2 x 55 kW feed motor: 4.0 kW width adjustment motor: 0.55 kW infeed roller motor: 0.75 kW weight: 8,000 kg Special features: Synchronously adjustable laser infeed table extension up to 8,000 mm automatic width adjustment with 6 fixed positions equipment for 1,000 mm diameter blades motor-driven log turning device electronic braking system

Leto izdelave: 2024, stanje: novo, The plant is available immediately! • Suitable for round timber diameters from 10 cm up to 50 cm • Suitable for round timber lengths from 2 – 6 m • 4-strand infeed conveyor, 6 m long • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with pin conveyor chain M 112 and protective rollers • Block haul with 2-inch chain and pusher dogs • Special pushers for low-noise transport • Measurement with 1 mm resolution • Measuring frame with additional heating and sun protection roof • Display of all operating statuses on a 17" monitor • Fully automatic sequence control • Various storage options and sorting criteria • 5 ejectors left/right, powered by SEW geared motors with brake Lsdpfx Alegvu Ale Nshf • Spacious, thermally insulated control cabin • 4 surveillance cameras with flat screen monitor • Control cabinet with all cables included • Sorting criteria as agreed

Leto izdelave: 2024, stanje: novo, max. cutting height: 160 mm max. cutting width: 600 mm min./max. edging width: 25-300 mm width adjustment times: 0.2-1.0 sec. feed rate: 5-30 (70) m/min saw motors: 37 kW (higher kW available) feed motor: 2.2 kW saw shaft diameter: 70 mm weight: 3,500 kg Standard equipment: 1 adjustable bushing 1 fixed bushing digital cutting width display automatic cutting width adjustment Optional equipment: Ljdpou I D Dofx Al Nshf electric height adjustment for feed rollers laser with adjustment device driven roller conveyors electronic braking system

Leto izdelave: 2024, stanje: novo, - 50 mm cutting height - 1210 mm maximum cutting width - 12 feed rollers - 10-30 m/min stepless feed rate - 37 kW saw motor (higher output available) Lhedpjfdzrhefx Al Njf - 2.2 kW feed motor - 70 mm saw shaft diameter - 225 mm circular saw blades - 4000 kg total weight

Leto izdelave: 2024, stanje: novo, - Machine with 3 pairs of feed rollers - Infeed and centering trough - Minimum log diameter: 100 mm - Maximum log diameter: 600 mm Ljdpefvbphofx Al Nehf - Minimum log length: 2,000 mm - Feed speed: 30 m/min - 5 interchangeable carbide knives - 37 kW debarking motor - 9.2 + 5.5 + 7.5 kW feed drive units - Total weight: 9,000 kg

Leto izdelave: 2024, stanje: novo, • 2.5 – 6 m cutting length Lsdpogp Su Esfx Al Nohf • 120 – 450 mm maximum cutting height • 80 – 250 mm cutting width • Infeed table with centering rollers • Infeed table with log turning device • Saw with 6-stage width adjustment • Outfeed bridge with 2 powered outfeed rollers • Outfeed bridge with 5 pairs of pressure rollers • 650 mm saw blade diameter • 2 x 37 kW bottom saw motors • 2 x 30 kW top saw motors • 6 saw cuts • 4 kW SEW feed gear motor • 5 – 30 m/min stepless feed speed

Leto izdelave: 2024, stanje: novo, max. cutting length 3,000–8,000 mm min. cutting length 500 mm Ledpjxfzlsfx Al Njhf max. cutting height 80–140 mm infinitely variable feed rate 10–30 m/min saw motor power 4.0–7.5 kW feed motor 1.5 kW number of saw carriages 2–6 weight 1,000–2,500 kg

Leto izdelave: 2024, stanje: novo, - 340 mm maximum cutting height Lhjdj E Rg Sspfx Al Njf - 70–250 mm maximum cutting width - 500 mm passage width - 6000 mm cutting length - 3–20 m/min feed speed - 2 x 18.5 kW saw motors - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm, max. 100 mm - Feed rate: 5–30 m/min, stepless adjustment - Roller conveyor included Lhsdpfx Alotykw Ss Nsf - Condition: as new The machine can be inspected and tested if you are interested. If you have any questions, please feel free to contact us.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, V ponudbi je salamurni injektor znamke Günther PI-17 Nadel, letnik 2000. V dobrem stanju, 380V, 16A. Ledpfxow R Tv Sj Al Njhf Dodatne informacije na zahtevo. Plačilo z gotovino ali predplačilo. Prodaja samo pravnim osebam, brez garancije, brez odgovornosti za stvarne napake.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, A brine injector by Günther, model PI-17 Needle, is being offered. The machine is in good condition; the impeller as well as the pressure gauge are new. 380V, 16A. Lsdev Safljpfx Al Nshf Further details available upon request. Payment in cash or advance payment. Sale to commercial customers only. No guarantee, no warranty.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Günther Lsdpfx Aswqgxhol Nehf Type: DP15/10 10 sections With cable