5-Osni Dvoglavi Žagalni Stroj nakup rabljenega (76.156)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1820027, model krmilnika: Siemens Sinumerik 840D, skupna višina: 2.900 mm, skupna dolžina: 6.000 mm, skupna širina: 2.700 mm, skupna masa: 8.000 kg, vhodna napetost: 400 V, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Gre za zelo dobro ohranjen stroj, ki izvira iz učne delavnice. Stroj je popolnoma delujoč in pripravljen za uporabo. Nodpfx Aoy Sf Sveh Uslb Konfiguracija: Siemens CNC krmiljenje Avtomatski menjalec orodij Dvojna postaja / večstranska obdelava Transporter za ostružke Sistem za hlajenje in mazanje Popolnoma ohišen

Stanje: rabljeno, Leto izdelave: 2020, proizvajalec krmilnikov: Siemens, model krmilnika: 840 Dsl, Description: General: Year of manufacture: 2020 Control: Siemens 840 Dsl Njdpsy Ha A Ejfx Ah Uolb Travel X/Y/Z: 600/630/500 mm Rapid traverse X/Y/Z: 120 m/min Spindle: Technology: Motor spindles Speed: 17,500 rpm Power: 35 kW Torque: 80 Nm Tool holder: HSK-63 Swivel Carrier: Technology: A- or U-axis with counter bearing Drive: Direct drive (torque motors) Clamping Bridge: Technology: Clamping bridge each with 1x NC rotary table Drive: Direct drive (torque motors) Table diameter: Ø 340 mm Max. table load: 150 kg Max. fixture dimensions: Ø 675 x 450 mm Tool Magazine: Technology: Chain magazine Tool changer: Pick-up Number of stations: 105 Max. tool diameter: 80 (160) mm Max. tool length: 450 mm Equipment / Accessories: Position measuring systems: Direct on all axes (glass scales) Drive systems: Direct on all axes (linear motors) Hydraulic clamping: 2x 3-circuit Chip disposal: Chip conveyor Coolant supply: ICS unit, 70 bar Coolant conditioning: Separate cooling unit Contact control: Pneumatic Tool breakage control: Inductive Workpiece measurement: Preparation for measuring probe Automation preparation: Profinet interface, automatic door, flushing cycle

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Opis: Vreteno: Tehnologija: nagibna glava z motornim vretenom Hitrost vrtenja: 24.000 obr/min Moč (maks.): 15 kW Navor (maks.): 14,3 Nm Vpenjalo orodja: HSK-A63 A-os: +/- 120° C-os: 270° Splošno: Orodni magazin: 18 postaj Nedpfx Ajy E Ebqsh Uolb Vpenjalna površina: 2.350 x 1.700 mm Hitri pomik v X/Y/Z: 80/80/60 m/min Oprema/Dodatki: Merjenje obdelovanca: merilni tipalo, m&h RWP 20.50 Merjenje orodja: laser, Hexagon Kontrola pretrga orodja: tipalo, m&h TS 35.20 Način nastavljanja: elektronski ročni kolesni regulator 3D ekstruder: CEAD S25 Sušilec/dovajalnik granulata: Vismec Dodatna oprema: hlajenje vretena

Stanje: dober (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 1101420, Offer 26077 Technical data approx.: - Control system for fully automatic operation Nodoy Ddpdopfx Ah Uelb - (feed, cutting speed, automatic material advance, etc.) - Cutting range at 90° round 260 mm flat 300 x 260 mm - Smallest material dimension round / flat 15 / 10 x 15 mm - Minimum cutting length 10 mm - Remnant length in automatic / manual mode approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Variable cutting speed 20 - 140 m/min - Variable feed pressure adjustment 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure - Coolant system - Total drive capacity 400 V / 8.0 kW - Required space (approx.) W 2700 x H 1600 x D 2450 mm - Weight (approx.) 1800 kg - Roller conveyor 2000 mm

Stanje: rabljeno, številka stroja/vozila: 008362, Delovno območje os X: 3200 mm Nljdpfex A Tl Asx Ah Ujb Delovno območje os Y: 1600 mm Delovna površina: z vakuumskimi konzolnimi podlagami Moč glavnega vretena: 12 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 32 Število mest za orodja: 22

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Heller MCH 280 C 5 osi Leto izdelave: 2006 Krmiljenje: Siemens 840 D Hitrost vretena: 8000 obr/min Pomiki: X: 1000 mm Y: 1200 mm Nodpfx Ahjy Nybgj Uelb Z: 1100 mm Velikost palete: 630 x 630 mm Rotacijska miza: 360.000° x 0,001° Mesta za orodja v magazinu: 400 Vpenjanje: HSK 100

Stanje: dober (rabljeno), Leto izdelave: 2022, QUASER UX 500 C 5-Axis Universal Machining Centre Year of manufacture: 2022 Control: SIEMENS S828D Travel paths X – 712 mm / Y – 508 mm / Z – 515 mm A-axis (swivel axis) +30/-120° C-axis (rotary axis) 360° ONLY approx. 1,500 spindle hours (as of: 25.03.2026) Equipment: SIEMENS S828D / PPU 290 with 15-inch touchscreen and movable operator panel, adjustable for tilt and rotation Software option: 3D simulation Software option: manage network drives Including temperature-controlled cooling system Portable electronic handwheel Heat exchanger for control cabinet Double-arm tool changer with 48 magazine positions Pneumatically actuated tool change door High precision option: glass scales in X/Y/Z Including overpressure system to prevent contamination Direct path measuring system in the rotary axis Direct path measuring system in the swivel axis Main spindle SIEMENS SK40 with 12,000 rpm, 13.3 kW/85 Nm (S6-25%), coupled, SC-4.2 Including temperature-controlled cooling system Including internal coolant supply With Grundfos pump, 20 bar, 25 l/min Including 25 µm cartridge filter Infrared receiver for workpiece and tool measurement 3D Infrared measuring probe RENISHAW OMP 40-2 for workpiece measurement, including software option for in-process measuring cycles Toolsetter OTS for tool measurement, including quick-change adapter Software option: kinematics measurement Cycle 996 Software option: measuring cycles for workpiece inspection and measurement / automatic operation Three-color signal tower Cartridge filter for ring cooling and chip flushing Coolant spray gun Deublin rotary union External air blast for dry machining Additional air blast through spindle, switchable via M-function Automatic hybrid central lubrication for guideways and ball screws Scraper belt chip conveyor for universal applications, suitable for short to medium-length chips Chip removal, consisting of work area chip flush with Grundfos pump 75 l/min at 3 bar Chip trays made of stainless steel and 2 screw conveyors in the work area Full work area enclosure with 2 corner view doors 2 work area lights Flood cooling with 10 nozzles arranged in a ring at the spindle nose, via Grundfos pump, 75 l/min at 3 bar Spindle warm-up tool Spindle cooling oil: Mobil Velocite Oil No. 3 Included in the scope of delivery: Spring-loaded 2-jaw power vise, SCHUNK brand Model KSF3-250 Approx. 70 tool holders, some with tools included Chip trolley Operating instructions/documentation Machine parameters on USB stick Nlodpjy Uhcpsfx Ah Ueb Technical data, transport & manufacturer brochure – see PDF. All technical specifications, illustrations and contents are non-binding and subject to change. Errors & omissions excepted. All other accessories visible in photos and videos are not included in the scope of delivery and are not part of this sale. The scope of delivery only comprises accessories expressly stated here, in the order confirmation, and on the invoice. FCA (Free Carrier – truck loaded) D-32457 Porta Westfalica Packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon order confirmation.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Deli, prikazani ročno, niso priloženi. Ob stroju so priloženi nosilci orodij SK 40. X 600 mm; Y 430 mm; Z 460 mm; A 150° x 0,001; C 360° x 0,001. 12.000 vrt/min, Heidenhain iTNC 530, 40 mest za orodje v menjalcu SK 40. Nsdpfxelpcdws Ah Ujlb

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 25.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12630000523, potovalna razdalja osi X: 800 mm, pomik osi Y: 900 mm, pomik po osi Z: 1.050 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain TNC460, skupna masa: 14.100 kg, Oprema: transportni trak za ostružke, Type: DMC 80 H linear Serial number: 12630000523 Year of manufacture: 2018 Maximum spindle speed: 12,000 rpm HSK-A100, torque: 430 Nm NC rotary tilting table for 5-axis machining B-axis: 360° A-axis: 25° / -200° 2-pallet changer Tool magazine with 183 slots (3 wheels) Operator panel for loading station Production package Heidenhain TS649 touch probe Tool breakage control 3D quickSet MPC machine protection control Coolant system with 980 l / 80 bar through-spindle coolant Nodpfsy R Ra Nsx Ah Ujlb 10 additional T-slot pallets 630x630 mm Machine weight: 14,100 kg Tool holders and accessories as per agreement Available at short notice, disassembly and loading by arrangement If you have any questions or need further information, please feel free to send us a message or call us.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 12.719 h, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 850 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 800 mm, dolžina podajanja os Z: 850 mm, nazivna (navidezna) moč: 21 kVA, proizvajalec krmilnikov: Heidenhain TNC 640 mit CELOS, teža obdelovanca (maks.): 2.000 kg, skupna višina: 3.200 mm, skupna dolžina: 4.500 mm, skupna širina: 7.100 mm, širina mize: 850 mm, dolžina mize: 2.350 mm, vrtljajska hitrost (min.): 15.000 obr/min, hitrost vretena (min.): 15.000 obr/min, Year of manufacture: 2022 CNC control: Heidenhain TNC 640 with CELOS Axes Travel X-axis mm: 2000 Travel Y-axis mm: 800 Travel Z-axis mm: 850 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: ±120 Rapid traverse m/min: 50 Axis acceleration m/s²: 5 Work table Pallet dimensions mm: 2350 x 850 Max. workpiece weight kg: 2000 NC milling/turning table: Pallet dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Max. spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 600 Tool system Tool holder: SK 40 Number of tools in magazine: 40 Tool changer type: Double gripper With free adjacent places mm: 130 With occupied adjacent places mm: 80 Max. tool length mm: 400 Max. tool weight kg: 8 Chip-to-chip time sec.: from 7.5 Equipment Chip conveyor Fixed table with integrated rotary table Infrared measuring probe Nlsdpoy Shgvsfx Ah Uob Internal coolant supply Rinse gun Blow air through spindle center selectable via M function Signal lamp Mist separator NC rotary tilting table Prepared for use with 3D quickSET MPC – Machine Protection Control Automatic work area door Automation interface Machine operating hours: Power-on hours: 18,669 Spindle operating hours: 12,719 Base machine: Dimensions/Weight Length mm: 4500 Width mm: 7100 Height mm: 3200

Stanje: zelo dobro (rabljeno), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity Pressing force: 135 t Bending length: 4000 mm Dimensions (L x W x H): approx. 4500 x 1600 x 2430 mm Weight: 10,500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for penetration depth, backgauge, and stop fingers (top/middle/bottom) • Stop fingers can be adjusted manually for joint/separate positioning • Graphical programming and display • CE conformity due to single working speed • Hydraulic synchronization control • Manual table crowning via handwheel adjustment under the die with SIKO counter • Segmented upper tools, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Additional segmented upper and lower tools • Busbar • Tool clamping system “PROMECAM” • 2 support arms • Fast, precise, and easy to regulate • Foot switch and emergency stop • Electrically interlocked safety doors (right, left, and rear) • Single working speed, fast return stroke • CE compliant Njdpfx Ahjx Npiys Uslb UVV certified until 04/2027 Delivery: immediately ex stock Dortmund, loaded free on truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Število krmiljenih osi: 5 Hod osi X (vzdolžna): 10.350 mm Hod osi Y (prečna): 800 mm Nedpfxsy A S Daj Ah Uelb Hod osi Z (navpična): 525 mm Rotacija osi B (vertikalno-horizontalna rotacija): od 0° do 90°, neprekinjeno Rotacija osi C (pravokotno na delovno površino): od 0° do 360° Moč elektrovretena pri 24.000 min⁻¹: 7 kW Neodvisni delovni coni: 2 Stožec za pritrditev orodja: HSK-E 40 Kapaciteta magazina za orodje: 9+1 Največje dimenzije diskastega rezkalnika, premer/debelina: 300/5 mm Avtomatsko pozicioniranje klešč

Stanje: rabljeno, Leto izdelave: 1996, Overview This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has a capacity of 29,000 bottles per hour. The machine has undergone several upgrades, including the installation of an S7 control system, lye filtration with drum screen, and pH value monitoring for hot water circuit 1. The machine will remain in operation until the end of January 2026 and can be inspected in person at any time until then. Technical Details - Capacity: 29,000 bottles/hour - Bottle diameter: 54 - 90 mm - Bottle height: 180 - 340 mm Nlodpovxtavofx Ah Usb Equipment & Upgrades - Plastic bottle cell with 110-pitch spacing - Suitable for swing-top bottles - Bottle diameter: 54 - 90 mm - Bottle height: 180 - 340 mm Upgrades: - Retrofit S7 control system - Drum screen for lye filtration - Guardrails on the machine - Swing-top specific lye spraying at the return section Cleaning & Heating System: - Rotating spray systems - Heating via shell and tube heat exchanger and hot water - Lye concentration measurement and dosing control, including post-lye - pH value measurement for hot water circuit 1 Soaking & Rinsing System: - Double pre-soak with sieve belt - Lye volume: 30 m³ - Post-lye, hot water 1, hot water 2, cold water and fresh water rinses - Head section can be damped and cleaned with disinfectant - H₂ extraction system

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Visoko zmogljiva okvirna žaga / HIGH SPEED FRAME SAW EWD HDN 600 TEHNIČNI PODATKI: Dobro vzdrževana visoko zmogljiva okvirna žaga Dimenzija okvirja: 710 x 735 mm Nodpsy D Hitofx Ah Uelb Hod: 600 mm Obratov: 310 U/min Popolnoma hidravlična z avtomatsko nastavitvijo izriva Hidravlično napenjanje žage in vpenjanje rezila Pogon in prenos Električna omara z upravljanjem Razcepni klin tipa AVER, s hidravličnim pogonom V zelo dobrem stanju (po želji lahko tudi POPOLNOMA OBNOVLJENA!!) Odlično stanje z daljinsko vodenim napenjalnim vozičkom

Stanje: rabljeno, številka stroja/vozila: IntNr231520, A used 5-axis CNC machining centre, CHIRON FZ 08 S, manufactured in 1998, is available for sale. Technical Data: Machine type: 5-axis CNC machining centre / vertical machining centre CNC control: FANUC 21i-M (depending on version) Travel paths: Nljdpfx Ahjy Eid Ne Ueb X-axis: approx. 300–350 mm Y-axis: 250 mm Z-axis: 250 mm A-axis: 360° (with appropriate 5-axis/rotary axis configuration) B-axis / swivel axis: -20° / +110° Table size / clamping area: 550 x 300 mm Max. workpiece weight: up to approx. 50 kg (as per market indications) Tool magazine: 12 tools Spindle taper: HSK-A 40 Spindle speed: up to 10,000 rpm Spindle motor power: 3.7 kW Machine weight: 1,820 kg Dimensions (L x W x H): 2,050 x 2,250 x 1,900 mm The machine may be inspected under power by appointment. Subject to prior sale. Technical data and information are subject to change and correction.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, vhodni tok: 2 A, vhodna frekvenca: 50 Hz, moč: 0,48 kW (0,65 KM), For sale: Mosca strapping machine P-5, year of manufacture 2006. Suitable for bundling newspapers, magazines, or shipping cartons. The machine was used very little and stored away for 6 years in between. The strapping cycle is triggered manually via foot pedal. Strapping tape: 5 mm; cycle output: 50 to 55 strappings per minute; automatic tape threading and tape end ejection; electronic tension adjustment via potentiometer, with soft tension button. The machine has been fully refurbished and is in very good condition. Frame size: 600 x 500 mm Video available upon request. Viewing and test operation possible by appointment. Delivery free of charge within 200 km of Vienna. We can secure and pack the machine on a pallet for freight forwarding or self-collection. Type: RO-M-P5 Serial number: 87878 Connection type: 1L~N~PE Voltage: 230 V Current type: AC Power: 0.48 kW Frequency: 50 Hz Current: 2.6 A Year of manufacture: 2007 Nledjy Ew N Tepfx Ah Uob Control voltage: V Control current type: DC If you have any questions or need further information, please feel free to send us a message or call us.

Stanje: rabljeno, številka stroja/vozila: 008468, Delovno območje os X: 3680 mm Delovno območje os Y: 1380 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 11 kW Nsdpfxey Sgp Ao Ah Uslb Število kontroliranih osi: 5 osi Število vrtalnih vreten: 21 Število mest za orodja: 34

Stanje: rabljeno, številka stroja/vozila: 008480, Delovno območje os X: 4600 mm Delovno območje os Y: 1935 mm Nedpfx Aey Edqkeh Uolb Delovna površina: S konzolami z vakuumskim prijemom Moč glavnega vretena: 18 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 31 Število orodnih mest: 58

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12071602, Ponujamo zelo dobro ohranjen CNC 5-osni obdelovalni center ARIX V450, letnik 2012. Model: V450 Nlsdpfxeyybx Ie Ah Usb Napetost: 400 V Faze: 3 Vhodna moč: 12 kVA Moč vretena: 7,5 kW Hitrost vretena: 8000 obr/min Serijska številka: 12071602 Datum izdelave: 2012-07 Teža: 3500 kg Potrebna postavitvena površina: 2,7 m (sprednja širina), 2,3 m globina, 2,5 m višina !!!!! Podrobnejši opis najdete v priloženem PDF dokumentu. !!!!! V primeru vprašanj ali za dodatne informacije nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 2004, potovalna razdalja osi X: 1.750 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 600 mm, CNC Gantry Milling Machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Model: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Gantry handwheel Fully automatic A/B milling head High-pressure coolant system Specifications Metric / Imperial X axis: 1750 mm Y axis: 1400 mm Z axis: 600 mm Table length: 1200 mm Table width: 1000 mm Table load capacity: 5000 kg Feed rate X axis: 35,000 mm/min Feed rate Y axis: 35,000 mm/min Nlodsuni D Eopfx Ah Usb Feed rate Z axis: 35,000 mm/min Tool holder: HSK 63 ISO/Bt/Mk Spindle power: 25 kW Spindle speed: 18,000 rpm Tool changer capacity: 30 Through-spindle coolant: 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling unit: Yes Dimensions (approx.): Length: 6000 mm Width: 4000 mm Height: 3850 mm Weight: 21,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contractual terms. We recommend verifying all crucial details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 850 mm, pomik osi Y: 550 mm, pomik po osi Z: 510 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, skupna dolžina: 8.000 mm, skupna širina: 3.325 mm, širina mize: 500 mm, dolžina mize: 600 mm, obremenitev mize: 500 kg, skupna masa: 12.000 kg, moč vretenovega motorja: 11.000 W, 5-Axis Machining Center MAZAK - VARIAXIS J600-5X MACH-ID 9484 Manufacturer: MAZAK Model: VARIAXIS J600-5X Control: MAZATROL Matrix 2 Year of manufacture: 2015 5-axis manufacturing cell with automation, LANG 20 positions Renishaw 3D probe with presetter sphere LANG preparation system with vacuum 25 LANG pallets with vise / clamping device / chuck Only 7,155 operating hours! Original price: 500,000 EUR Nlsdpfjyyybhjx Ah Ueb X-axis travel: 850mm Y-axis travel: 550mm Z-axis travel: 510mm A-axis: -120 to +30° B-axis: -120 to +30° Table length: 600mm Table width: 500mm Table load: 500kg Table diameter: Ø600mm Feed rate X-axis: 30,000mm/min Feed rate Y-axis: 30,000mm/min Feed rate Z-axis: 30,000mm/min Feed rate B-axis: 30°/min Tool holder: 40ISO/BT/MK Spindle power: 11kW Spindle speed: 12,000 rpm Tool changer: 30 positions ICS (internal coolant supply): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant system: Yes Length: 8,000mm Width: 3,325mm Height: 3,060mm Weight: 12,000kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is communicated in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend checking all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 760 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, hitrost pomika os X: 30.000 m/min, hitrost podajanja osi Y: 30.000 m/min, hitrost podajanja os Z: 30.000 m/min, skupna višina: 2.450 mm, skupna dolžina: 5.200 mm, skupna širina: 4.500 mm, širina mize: 500 mm, dolžina mize: 630 mm, obremenitev mize: 300 kg, skupna masa: 12.000 kg, 5-osni obdelovalni center DECKEL MAHO - DMC 60T MACH-ID 9443 Proizvajalec: DECKEL MAHO Tip: DMC 60T Krmiljenje: HeidenHain iTNC530 Leto izdelave: 2005 € 12.500,00 X-os: 760 mm Y-os: 560 mm Z-os: 560 mm A-os: 360000° B-os: od -30° do +120° Dolžina mize: 630 mm Njdpfx Aoym R Tgsh Ujlb Širina mize: 500 mm Nosilnost mize: 300 kg Pomik X-os: 30.000 mm/min Pomik Y-os: 30.000 mm/min Pomik Z-os: 30.000 mm/min Vpenjalni sistem orodij: 40ISO/BT/MK Moč glavnega vretena: 26 kW Število obratov: 18.000 obr/min Menjalec orodij: 30 mest Notranje hlajenje (IKZ): 15 bar Število krmiljenih osi: 5 Odvajač ostružkov: Da Hladilni sistem: Da Dolžina: 5.200 mm Širina: 4.500 mm Višina: 2.450 mm Teža: 12.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.300 mm, širina mize: 1.200 mm, dolžina mize: 4.500 mm, premer vrtljive mize: 1.250 mm, X-os: 4000mm Y-os: 1200mm Z-os: 1300mm A-os: 105° B-os: 360000° Dolžina mize: 4500mm Širina mize: 1200mm Premer mize Ø: 1250mm Vpenjanje orodja: 100ISO/BT/MK Moč vretena: 90kW Hitrost vrtenja: 15000obr/min Menjalec orodij: 60 IKZ: 70 Število krmiljenih osi: 5 Transporter ostružkov: Da Hladilna naprava: Da Dolžina: 10500mm Širina: 4500mm Višina: 4100mm Nlodpfex Sqf Isx Ah Ujb Teža: 34000kg

Stanje: dober (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 1.060 mm, pomik osi Y: 710 mm, pomik po osi Z: 710 mm, hitrost pomika os X: 15.000 m/min, hitrost podajanja osi Y: 15.000 m/min, hitrost podajanja os Z: 15.000 m/min, skupna višina: 2.800 mm, skupna dolžina: 3.200 mm, skupna širina: 2.900 mm, širina mize: 800 mm, dolžina mize: 1.500 mm, obremenitev mize: 550 kg, premer vrtljive mize: 800 mm, moč vretenovega motorja: 20.000 W, Chip conveyor 3D probe Paper band filtration system Internal coolant supply 15 bar Machine under power X-axis travel: 1060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm A-axis: 360000° B-axis: -30° to +120° Table length: 1500 mm Table width: 800 mm Table load capacity: 550 kg Table diameter Ø: 800 mm Feed rate X-axis: 15000 mm/min Feed rate Y-axis: 15000 mm/min Feed rate Z-axis: 15000 mm/min Tool holder: ISO/Bt/MK 40 Spindle power: 20 kW Spindle speed: 12000 rpm Tool changer: 32 positions ICS (internal coolant supply): 15 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling system: Yes Length: 3200 mm Width: 2900 mm Height: 2800 mm Weight: 9500 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, these do not constitute representations or contractual terms. We recommend verifying all critical details. Nedpfxeym Sdys Ah Uslb

Stanje: dober (rabljeno), potovalna razdalja osi X: 12.000 mm, pomik osi Y: 7.300 mm, pomik po osi Z: 3.000 mm, skupna dolžina: 30.000 mm, dolžina mize: 12.000 mm, širina mize: 4.730 mm, skupna širina: 12.000 mm, skupna višina: 10.475 mm, obremenitev mize: 250.000 kg, skupna masa: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Manufacturer: Waldrich - Siegen - Model: PF-F-150(1)-530/400 X-axis: 12,000 mm Y-axis: 7,300 mm Z-axis: 3,000 mm W-axis: 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Traverse-type milling head Vertically adjustable crossbeam Horizontal hydrostatic spindle ram Milling spindle diameter: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angle milling head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2400 rpm Küma fixed head GB1D – 90 kW – 2400 rpm Küma angle head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – coolant through spindle at 20 / 40 bar Machine refurbished in 2004 by Schiess Bed – Table assembly: Renewal of sliding surfaces Regrinding of guideways Renewal of table drive Direct linear measuring system Hydrostatic guideway Gantry and crossbeam: Modification of adjusting spindle Trapezoidal spindle replaced with ball screw Direct linear measuring system New drive motors to increase feed speed of milling axes New milling slide with hydrostatic guideways Electrical System: Completely new control cabinet Completely new wiring Nedpfeytrxksx Ah Uolb Siemens Sinumerik 840D control – 6 axes Equipment: Completely new Raumag-Janich safety covers Completely new double swarf conveyor Large tool package Extensive clamping accessories Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine casings. Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute any representation or contractual terms. We recommend verifying all critical details.