5-osni obdelovalni center

BIESSE ROVER C 9.50 CONF. 3

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: Ledpfxsxy Tmno Al Neaa B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), največja višina reza: 200 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, dolžina pomične mize: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting capability + / - 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm travel - Mitre cross-cut fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Workpiece holder - On/off switch on the double roller carriage - Front support roller Lodeuh R R Eepfx Al Njaa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) Laodpox D H Hcefx Al Nja • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 810 mm, širina mize: 975 mm, TRAČNA RAZREZOVALNA ŽAGA MEBER MOD. SR900 - Dimenzije mize: 975x810mm - Motor: 11kW Laedpfx Aox Rt Aael Nsa - Leto: 2000 (CE) - POPOLNA Z NAVODILOM

Stanje: rabljeno, številka stroja/vozila: 008319, Delovno območje os X: 6380 mm Delovno območje os Y: 1380 mm Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 11 kW Število krmiljenih osi: 5 osi Lodpfx Aljx A Tc Io Nsaa Število mest za orodja: 32

Stanje: rabljeno, številka stroja/vozila: 007848, Type of applied edging: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Joint trimming: yes Multifunctional unit: yes Max. feed speed: 20 m/min Maximum panel thickness: 60 mm Lajdpfxewkrqpe Al Nea Processing units: 8 pcs

Leto izdelave: 2008, stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 22589, MC s prečno mizo Model: Rover A3 30 Leto: 2008 4 osi Delovno območje: x = 3060 mm y = 1260 mm z = 150 mm 6 delovnih nosilcev L = 1200 Laedpslu Hhcefx Al Nea Na voljo avgusta 2023 Orodja niso vključena

Stanje: novo, Na prodaj nova, še nikoli uporabljena peletirna! Možnost naročila s 6 mm ali 8 mm matricami (1 kos po izbiri priložen stroju). Zmogljivost izdelave pelet do 400-450 kg/uro, odvisno od vhodnega materiala. Premer pelet: 3 mm, 4 mm, 5 mm, 6 mm ali 8 mm (glede na izbrano matrico). Set: matrica 3 mm, 4 mm, 5 mm, 6 mm z valjem za stroj – cena: 2000 €. Premer matrice: 300 mm. Nastavljiva dolžina peleta: 10-30 mm. Moč motorja: 22 kW. Dimenzije: 1400 mm x 1000 mm x 1200 mm. Teža: 750 kg. Vsebnost vlage v surovini: 10-12-14 %. Vsebnost vlage vpliva na kvaliteto pelet. Oznaka: Dph3O7. Velikost vhodnega materiala: žagovina: 1-3 mm, slama: 3-6 mm. Gostota granul ne presega 1250 kg/m3. Lokacija: Budimpešta (EU), Madžarska. Lajdpfx Ajxmhx Ejl Nja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Biesse Akron 1330 A Kantenanleimmaschine Einseitige Kantenanleimmaschine AKRON 1330-A Ljdeyyb Icspfx Al Nsaa Leimauftragseinheit SP03 Kappenaggregat IT03 Feintrimmaggregat RF02 Eckenrundungsaggregat AR02 VORFRÄSAGGREGAT RT02 mit symmetrischen Diamantwerkzeugen H=45 mm Z=2+2 30°, inklusive. KANTENSCHABER RB02 (Werkzeuge nicht enthalten) LEIMSCHABER-EINHEIT RC02 BÜRSTAGGREGAT SZ02 ERGÄNZENDE SEITLICHE WERKSTÜCKUNTERSTÜTZUNG MONTAGEKIT FÜR RÜCKFÜHRUNGSSYSTEM HANDEINSCHUBVORRICHTUNG FÜR SCHMALE TEILE SET ZUR BEARBEITUNG VON "SHADOW LINE"-PROFILPLATTEN GERADER LUFTTISCH AM MASCHINENZUFÜHRBEREICH ANTIHAFTMITTELSYSTEM ADZ02 PAAR DIAMANTIERTE FRÄSER H=65 mm Z=2+2 30°. Zum Austausch der Standardwerkzeuge. HYBRID-LEIMAUFNAHMEEINHEIT FÜR GRANULAT-EVA/PUR-LEIM STATT STANDARD-SYSTEM TM15 HYBRID-VORSCHMELZER FÜR EVA/PUR-LEIM ADAPTIVE INFRAROTLAMPE AdIRL-700 AX-4, NC-ACHSE AM FEINSCHNEIDAGGREGAT PRO-NESTING-KIT FÜR DAS FEINSCHNEIDAGGREGAT Paar Mehrprofilfräser für das Feinschneidaggregat: Fase 25 Grad, R=2 mm + R=1 mm, gerades Profil für Massivholz AX-2, NC-ACHSE AM ECKENRUNDUNGSAGGREGAT NUR RUNDFUNKTION SCHIEBEEINHEIT FÜR DAS ECKENRUNDUNGSAGGREGAT Paar Fräser, R=2 mm, für Eckenrundungsaggregat Paar Fräser, R=1 mm, für Eckenrundungsaggregat AX-4, NC-ACHSE AM KANTENSCHABER PRO-NESTING-KIT FÜR DEN KANTENSCHABER Paar Messer R=2 mm, für Kantenschaber Paar Messer R=1 mm, für Kantenschaber REINIGUNGSEINHEIT LPT02 (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: rabljeno, Leto izdelave: 2010, Unladen weight: 6,100 kg Price: On request - Special features: - Description: The machine is equipped with 2 milling spindles, drilling unit, saw unit, and edge milling device. - Year of manufacture: 2010 - Documentation available: Yes Ledpfx Ajy Dub Rol Neaa - CE marking present: Yes - CE certificate available: No - Serial number: 89420 - Number of milling spindles [units]: 2 - Milling spindle 1: - Number of controlled axes [pcs]: 4 - C-axis available: Yes - Milling spindle 2: - Number of controlled axes [pcs]: 4 - C-axis available: Yes - Type of milling table: Beam table - Tool holding system: HSK-F63 - Drilling tool available: Yes - Horizontal drilling spindles [pcs]: 12 - Vertical drilling spindles [pcs]: 30 - Saw unit available: Yes - Tool changer positions [pcs]: 33 - System/software: BiesseWorks - Safety features: Safety mat, safety fence - Vacuum pump available: Yes - Quantity [pcs]: 1 - Brand: Gardner Denver - Type: C-VLR 301 - Year of manufacture: 2017 - Main motor power [kW]: 5.5 - Capacity [m³/h]: 290 - CNC options: Waste conveyor - CNC documentation available: USB stick - Working area X [mm]: 3640 - Working area Y [mm]: 1850 - Z-axis working range [mm]: 350 - Transport weight [kg]: 6100kg Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets