Weiler Primus Vcd nakup rabljenega (260)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 AC Precision Centre Lathe 3-Axis Digital Readout Weiler with AC Drive, Infinitely Variable Speed, CE Marking!!!!! Technical Data: >> Year of manufacture: 1995, Machine No. 3820 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: up to 3000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock morse taper: MK 3 Giedpfx Aoy Ulqwea Ueu >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: Metric, inch, module, and diametral pitch threads possible >> Metric pitch range: 0.25 to 8 mm >> Weight: approx. 1000 kg >> Spindle brake switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and Equipment: >> 3-axis digital readout Weiler >> Quick-collet chucking device with collets from 2 to 28 mm, increment 1 mm >> 160 mm 3-jaw chuck, new, with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop Safety Features: Electronic chip guard for the work spindle, lead and feed screw covers, brake motor, 2 emergency stop switches, electrical safety switch on the gear housing About the machine: Offered is a Weiler Praktikant AC lead and feed screw lathe from 1995 in very good condition. A very fine lathe with infinitely variable AC spindle drive. All slides run smoothly and uniformly. The Weiler runs quietly even at high speeds. The machine carries a CE marking and comes from a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. The digital readout makes operation even easier and more precise. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, SERVO KONVENCIONALNI STRUŽNICA WEILER „C 30“ Z 2 osmi Siemens Sinumerik 802 C z WEILER programsko opremo C 1 Letnik: 2002 Premer vretena: 42 mm Razdalja med konicama: 750 mm Obratovalni premer nad posteljo: 330 mm Območje vrtljajev: 1 – 4500 min⁻¹ Z naslednjo dodatno opremo: Giodpfx Aey Txu Hja Ueu Multifix nosilec orodja Zaščita za vpenjalno glavo Tričeljustna vpenjalna glava RÖHM Ø 160 mm 2 seta trdih nadgradnih čeljusti Naprav za vpenjalne klešče 3 centrirne konice Posoda za odpadne ostružke Zadnja stena za zaščito pred ostružki z osvetlitvijo Sistem za hlajenje 10 nastavljivih nožic za stroj Navodila za uporabo STROJ JE V ZELO DOBREM STANJU!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Premer struženja 570 mm Dolžina struženja 1000 mm Gjdpfey D T Uvsx Aa Usiu Krmiljenje Siemens / Weiler D2 Teža stroja ca. 3,2 t Prostorske zahteve ca. 3,0 x 2,0 x 1,9 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Premer struženja 410/440 mm Dolžina struženja 950 mm Krmiljenje Siemens / Weiler D2 Največja teža obdelovanca 900 kg Gisdsyrh Apspfx Aa Ueu Vretenasta glava Gr 6 MK 6 Premer vretenine 54 mm Prečni pomik 230 mm Premer pinole MK 4 mm Hod pinole 120 mm Višina konice 200 mm Največji navojni korak v mm 0,1 - 250 mm Vretenaste hitrosti - brezstopenjske 1 - 3000 min⁻¹ Skupna potrebna moč 12 kW Teža stroja pribl. 2,1 t Prostorska potreba pribl. 2,3 x 1,5 x 1,8 m

Stanje: rabljeno, Leto izdelave: 1986, Swing diameter over bed: 320 mm Swing diameter over cross slide: 198 mm Turning length: 650 mm Total power requirement: 2.2 kW Machine weight approx.: 650 kg Space requirement approx.: 1700 x 1000 x 1700 mm Digital readout: 3-axis digital display Bar capacity: Ø 40 mm Spindle speed range: 96 - 2500 rpm Spindle nose: A 2 - 5 Feed range: 0.007 - 0.63 mm/rev Thread cutting capability: metric 0.25 - 8 mm, inch 80 - 2 TPI, diametral pitch 200 - 5 DP, module 0.2 - 4 Tailstock: MT 3 3-jaw chuck: 160 mm Multifix quick-change toolpost: Type B Gisdpfx Ajufud Dsa Ueu

Stanje: pripravljen za uporabo (rabljen), Drejlenght 500 mm Drejdijametar preko kreveta 297 mm Drejdijametar preko suporta 160 mm Provrt vretena 36,0 mm Navoj DIN 55022 Gr. 5 Pinola: 3 MK Hod pinole 90,0 mm Broj obrtaja: 30 - 3550 o/min Broj obrtaja motora: 1410 / 2830 o/min Ukupna potrebna snaga 3,3 kW Napon 380 V Težina mašine cca 620 kg Dimenzije (D-Š-V) 1420 x 700 x 1200 mm iz srednje stručne škole – veoma dobro stanje (!!) posebno pogodna za srednje precizne delove za struganje Oprema: - robusni univerzalni strug sa navojnom i pogonskom vretenom - HEIDENHAIN 3-osni digitalni prikaz "VRZ 773" - RÖHM 3-viljuškasta stezna glava Ø 160 mm - preklopna zaštita za steznu glavu - ključ za glavu - MULTIFIX nosač alata A, sa 3 nova umetka - pomični konjić - zakretna mašinska lampa - kontrolna tabla, napred levo - automatsko pomeranje za planski i gornji support - postolje mašine sa vratašcima (prostor za odlaganje) - zaštita zadnje strane od prskanja strugotine - taster za hitno zaustavljanje Godpfexmakysx Aa Ueiu - uputstvo za upotrebu

Stanje: pripravljen za uporabo (rabljen), Drehlänge 800 mm Drehdurchmesser über Bett 330 mm Drehdurchmesser über Support 170 mm Drehzahlbereich 24 - 1900 U/min Spindelbohrung 38.0 mm Spitzenhöhe 165 mm Gesamtleistungsbedarf 3.5 kW Maschinengewicht ca. 850 kg Raumbedarf ca. 1850 x 800 x 1700 mm aus einer Berufsschule - guter Zustand (!!) besonders geeignet für mittlere Präzisions-Drehteile - im überprüften Zustand - Maschinenvideo - ?v=GDoJ0Z7Dckw Ausstattung: - robuste Leit-/Zugspindel Drehmaschine - HEIDENHAIN 3-Achs Digitalanzeige "VRZ 770" - RÖHM Dreibackenfutter Ø 160 mm - klappbarer Drehfutterschutz - Futterschlüssel - TRIPAN-Stahlhalter mit 3x Einsätzen - verschiebbarer Reitstock - schwenkbare Maschinenleuchte - Bedienfeld, vorne links - automatische Vorschübe für Plan- und Obersupport Godsxmaktepfx Aa Ujiu - Maschinenuntergestell, mit Schranktür (Staufläche) - Spänespritzschutz-Rückwand - NOT Aus Taster - Bedienungsanleitung

Stanje: pripravljen za uporabo (rabljen), Stružnica L & Z WEILER Praktikant 800 R - Premer struženja nad posteljo: 300 mm - Premer struženja nad suportom: 150 mm - Dolžina struženja: 800 mm - Premer vretena: cca 42 mm - Območje vrtljajev: 40 - 2000 min⁻¹ - Avtomatski vzdolžni / prečni pomiki - Navijanje: metrično / colsko itd. - Konjiček MK 3 - Trivpenjalna glava - Zadnja zaščitna stena za ostružke in delovna svetilka - Posoda za ostružke Gisdjzbiyhepfx Aa Usu - Menjalna kolesa - Omara za orodje in upravljalno orodje - Dokumentacija Mere: D x Š x V 1,8x0,8x1,6 metra / Teža 800 kg Pridržujemo si pravico do napak in vnosnih pomot.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Heidenhain ND 780, from a training workshop!! Technical specifications: - Machine No.: 7702, Year of manufacture: approx. 1990 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock: Morse taper 3 - Feed rates: 0.012 to 0.9 mm/rev - Thread types: Metric, Inch, Module, and Diametral Pitch - Metric pitch range: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Quick-clamping system for internal and external collets (see photo) - 1 piece three-jaw chuck, 3 sets of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 piece bed stop - Change gears Gisdpfxjy T Hqcs Aa Uou - Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. Naturally, the machine is fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of this Weiler was a training workshop. The machine comes equipped with comprehensive accessories. Take the opportunity to inspect the machine under power on site and see its very good condition for yourself.

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Weiler / Contec (licenčna proizvodnja) Matador stružnica, letnik 1993, s 3-osnim digitalnim prikazovalnikom Elesta, štiričeljustnim vpenjalom, hitromenjalcem Multifix, zadnjim zaščitnim ščitnikom pred pršenjem, električnim varovalom vpenjala. Stroj je v dobrem, delujočem stanju, po dogovoru je možen ogled v delovanju pod napetostjo. Giedpfx Aoxp Ru Usa Ueu

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Weiler / Contec (licenčna proizvodnja) Matador stružnica, letnik 1993, s 3-osnim digitalnim prikazovalnikom Elesta, štiričeljustnim vpenjalom, hitromenjalcem Multifix, zadnjim zaščitnim ščitnikom pred pršenjem, električnim varovalom vpenjala. Stroj je v dobrem, delujočem stanju, po dogovoru je možen ogled v delovanju pod napetostjo. Giedsxp Rvlopfx Aa Uou

Stanje: pripravljen za uporabo (rabljen), Drežna dolžina 500 mm Drežani premer nad ležiščem 297 mm Drežani premer nad podporo 160 mm Vrtina vretena 36,0 mm Pritrditev DIN 55022 Gr. 5 Konica: 3 MK Hod konice 90,0 mm Število vrtljajev 30 - 3550 min⁻¹ Število vrtljajev motorja: 1410 / 2830 min⁻¹ Skupna potrebna moč 3,3 kW Napetost 380 V Gedpjxq Hhysfx Aa Ueiu Teža stroja cca. 620 kg Dimenzije D-Š-V 1420 x 700 x 1200 mm Iz šole za poklice – zelo dobro stanje (!!) Posebej primeren za srednje natančne obdelovance Oprema: - robusten stružni stroj z vodilnim in pogonskim vretenom - RÖHM trikrako vpenjalno glavo Ø 160 mm - preklopni zaščitni pokrov za vpenjalno glavo - ključ za vpenjalno glavo - MULTIFIX nosilec rezila A s 3 novimi vložki - pomičen konjiček - vrtljiva strojna svetilka - upravljalna plošča spredaj levo - avtomatski pomiki za čelni in zgornji suport - strojno podnožje z omaro (prostor za shranjevanje) - zaščitna zadnja stena proti ostružkom - gumb za nujni izklop - navodila za uporabo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by Elesta from Training Workshop!! Technical Data: >> Machine No. 88-8115, Year of manufacture: 1988 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor Giodpfx Aasy Tmkvs Ueu >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by Elesta >> Quick-clamping device for internal and external collets (see photo) >> 1 pc. 3-jaw chuck, 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler runs smoothly even at high speeds. The original location was a training workshop. The lathe is equipped with extensive accessories. You are welcome to inspect and test the machine under power on site to convince yourself of its excellent condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Giedpfx Aasy Ti Iwo Uju Model: E50 x 1000 Year of manufacture: 2003 Condition: Good, used, under power Operating hours: 43,000 h Technical data: See images. Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest - Parat 4-position tool turret

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VC Precision Lathe Manufacturer: Weiler Model: Weiler Praktikant VC Precision Lathe Year of manufacture: 2008 Condition: Used, very good, serviced and inspected with factory test report Gsdjy Ti E Nopfx Aa Usiu Technical Specifications Turning diameter: 250 mm Turning length: 650 mm Centre height: 160 mm Swing diameter over bed carriage: 320 mm Maximum swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Drive power – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle nose: 5 / DIN 55027 Spindle bearing diameter (front): 70 mm Spindle bore: 40 mm Usable bar capacity: 40 mm Toolpost: System: MultiFix B Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inch: 80-2 1/” Module: 0.25 – 4 mm Travel paths: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range: 180° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirement: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC Precision Lathe – Machine lamp – Documentation – 3-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 41.000 h, izvrtina vretena: 165 mm, stružna dolžina: 3.000 mm, premer struženja: 830 mm, premer struženja nad ležiščem sani: 1.200 mm, poteza s peresom: 400 mm, premer tulec: 140 mm, vrtilni moment: 8.000 Nm, Technical Data ----- Max. turning length: 3,000 mm Turning diameter: 830 mm Max. swing over bed: 1,200 mm Gisdpov Nhxzofx Aa Usu Bed width: 600 mm Spindle bore: 165 mm Spindle nose: DIN 55027 size 15 Chuck: Forkardt 3KS 800 mm Speed range: 1 - 280 / 4 - 900 rpm Number of gearbox speeds: 2 Torque: 8,000 Nm Number of turrets: 1 Sauter 4-position head turret for 140 mm toolholders Tailstock Quill diameter: 140 mm Quill stroke: 400 mm Features ----- Electronic handwheel Hydraulic power chuck Forkardt 3KS 800 mm Chip conveyor

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted, RAL 7035 light grey Machine no.: 1401 with warranty Includes: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip backsplash - Operating manual Gedpfxeg R S Rcj Aa Usiu -Used, as seen-

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Universal lead and feed screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant device - Electrically interlocked chuck guard - Quick-change tool post, size A - Simple bed stop Gjdpfx Aajhy Tdys Ueiu - Chip guard rear panel - Operating manual With warranty Used, as seen The machine is technically compliant with the state of the art at the time of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Universal lead and feed screw lathe Make: WEILER Model: Commodor Giedpfx Aemgaddja Ueu Year of manufacture: 1974 – overhauled Newly painted RAL 7035 light grey Machine No.: 0068 Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 56 mm With warranty Geometric acceptance with test protocol Accessories: - New FAGOR Innova 30i-T 3-axis digital readout - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual - Used, as seen -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Technical Data WEILER E90 x 6000 precision lathe with cycle control. The machine is in very good condition for its age. Maintenance records are available. Equipped with Brio milling unit, allowing for milling operations such as hexagon milling and keyway milling. Year of manufacture: 2002 Control system: Siemens Working area: Swing over bed: 900 mm Swing over cross slide: 530 mm Gijdpfozagkhex Aa Ueu Bed width: 600 mm Turning length: 6000 mm Spindle and drive: Spindle bore: 128 mm Spindle diameter at front bearing: 178 mm Speed range: 1 to 1120 rpm Main drive with 2-stage gearbox: 45 / 37 kW Tailstock: Quill diameter: 140 mm Quill travel: 300 mm Internal taper: MK 6 Dimensions and weight Machine weight: 13,000 kg Dimensions (L x W x H): 8400 x 2600 x 2150 mm Equipment and accessories: Indexing device for main spindle Brio BF90 milling attachment, taper: SK50, drive power: 11 kW Turret head with quick-change toolholder Heidenhain linear measuring system on X-axis Chip conveyor Numerous tools including toolholders, steady rests, 3 x 3-jaw chucks (900 mm, 600 mm, 300 mm), drills, and further accessories – see photos.

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: nepreverjeno, premer struženja nad prečnim suportom: 700 mm, stružna dolžina: 2.000 mm, premer struženja: 700 mm, izvrtina vretena: 106 mm, največja hitrost vretena: 1.800 obr/min, Naprodaj je: 1 kos rabljene ciklične stružnice Proizvajalec: Weiler Werkzeugmaschinen Giodpfxey R Dyvo Aa Usu Tip: E70 Leto izdelave: 1996 Tehnični podatki: Višina konic: cca 355 mm Premer obdelovanca nad posteljo: cca 700 mm Premer obdelovanca nad suportom: cca 420–450 mm Razdalja med konicama: 2000 mm Premer vretenaste izvrtine: 106 mm Vključno s prikazano dokumentacijo, transportnim trakom za odrezke in Sauterjevim nosilcem orodja. Stroj si lahko ogledate v našem skladišču v 09599 Freiberg.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 500 mm, premer struženja: 240 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 205 mm, pomik po osi Z: 530 mm, Oprema: dokumentacija / priročnik, Centre de tournage à commande numérique Weiler DZ 45 CNC / ARY avec commande Siemens Sinumerik 840D sl Le tour CNC de précision de Weiler pour les domaines de production à haute productivité, la fabrication d’outils, les instituts de recherche, etc. De haute qualité, économe en énergie, précis et très polyvalent. Giodpfx Ajum R Ebsa Usu Diamètre de tournage : 240 mm Longueur de tournage : env. 500 mm Passage de barre : 42 mm Broche principale de 21,5 kW Entraînements d’axes haute performance Adapté pour le tournage de mandrins, de barres et d’arbres Axe Y pour l’usinage de pièces complexes Contre-broche Jusqu’à 16 outils entraînés Usinage complet des pièces en une seule fixation Vitesses de déplacement rapide élevées Précision élevée grâce au système de mesure directe Nombreuses possibilités d’application Fonctions de sécurité intégrées sur tous les axes Lampe LED pour machine Cette offre est faite sans engagement et sans garantie. Modifications, erreurs et vente préalable expressément réservés.

Stanje: potreben popravila (rabljeno), Leto izdelave: 1990, LZ-strug proizvajalca WEILER Tip: COMMODOR Leto izdelave 1990 s 3-osnim digitalnim prikazovalnikom Heidenhain, držalom Multifix B, luneto, dokumentacijo stroja. Stroj je v okvari (sklopka). Višina konic: 214 mm Godpfx Aoq Hd Ipja Ueiu Premer struženja nad suportom: 200 mm Razdalja med konicama: 1000 mm Premer vretenine: 60 mm Hitrosti vretena: 45 - 2000 min⁻¹ Stroj se prodaja po fiksni ceni.

Stanje: rabljeno, Leto izdelave: 1996, obratovalne ure: 22.400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 474, - Weiler - E50/1 Giodpfx Aasy U Iqgj Ueu - Št. : 474 - Leto izdelave: 1996 - Obratovalne ure: cca 22.400 - Voest-Alpine Steinel krmilje (verjetno je krmiljenje potekalo preko ločenega namiznega računalnika) - Vključuje transporter ostružkov, več različnih nosilcev orodij in orodja Pošiljanje možno po dogovoru. Prodaja samo pravnim osebam. Naveden nakupna cena = neto, plus 19 % DDV = 9.282,00 € bruto

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 24.040 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 850 mm, stružna dolžina: 3.000 mm, premer struženja: 1.200 mm, izvrtina vretena: 165 mm, največja hitrost vretena: 900 obr/min, hitrost vretena (min.): 1 obr/min, potovalna razdalja osi X: 590 mm, pomik po osi Z: 3.000 mm, moč vretenovega motorja: 45 W, skupna višina: 2.600 mm, skupna dolžina: 6.700 mm, skupna širina: 2.300 mm, premer tulec: 140 mm, poteza s peresom: 300 mm, premer nihanja nad prečnim premičnikom: 850 mm, premer struženja nad ležiščem sani: 1.200 mm, vrsta vhodnega toka: trifazni, vrtilni moment: 8.000 Nm, skupna masa: 11.500 kg, Oprema: dokumentacija / priročnik, We offer this used Weiler E 120 X 3000 CNC lathe, year of manufacture 2008. Single ownership. Machine still turns to an accuracy of 0.01 mm. Suitable for single-part production. 70% aluminium machining. Main spindle indexing device 144x2.5° incl. bolt circle cycle. Scope of supply: - 1x faceplate 1100 mm, type PFDT4-1100-15", with hardened base jaws. - Various aluminium and steel jaws for the faceplate. - 1x live center for spindle bore. - 1x small steady rest 250-500 mm. - 1x large steady rest 480-800 mm. Gisdoza Ulgepfx Aa Usu - 1x drilling support at the cross-slide with D.100 mm mounting bore. - Various boring bars for drilling support. - 1x Parat turret head size 4. - 1x Capto holder with quick change system. - 3x Parat base holders for external machining. - 3x boring bar holders from Parat. - 4x boring bar holders. - 4x bushing adapters for boring bars. - 1x live center with 2x adapters. - 1x digital caliper 0-1025 mm. - 1x wall rack for micrometers. - 1x micrometer frame 1000-1200 mm. - 1x micrometer frame 900-1000 mm. - 1x micrometer frame 800-900 mm. - 1x micrometer frame 700-800 mm. - 1x micrometer frame 600-700 mm (2 pieces visible in the photo). - 1x micrometer frame 500-600 mm. - 1x micrometer frame 400-500 mm. - 1x micrometer frame 300-400 mm. - 1x inside micrometer set 50-1000 mm. - 1x chip container. Technical data: Model: E 120 X 3000 Machine No.: DJ06 Year of manufacture: 2008 Operating voltage: 400 V Control voltage: DC 24 V Connected load: 55 kVA Nominal current: 80 A Frequency: 50 Hz Main fuses: 100 A Machine weight: 11,500 kg If you have any questions or require further information, please feel free to send us a message or give us a call.