Wagner Enota Za Brizganje Barve nakup rabljenega (87.495)

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 5.400 h, vpenjalna sila: 400 kN, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.650 letvica, skupna masa: 24.500 kg, premer polžastega transporterja: 55 mm, Dobavni pogoji: iz lokacije Kedpfjv S H Rhex Al Nsdk Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 1.600 h, vpenjalna sila: 400 kN, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.650 letvica, skupna masa: 24.500 kg, premer polžastega transporterja: 55 mm, Dobavni pogoji: iz lokacije Kdjdpfx Alsv S H Rbe Nek Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Drive force moving platen: open: 105 kN close: 95 kN Clamping platen (W x H): 1,060 x 1,095 mm Clearance between tie bars (W x H): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Daylight opening: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Zoned cylinder heating: 6 zones Dry cycle time: 1,550 1/h Oil filling: 720 litres Dimensions and weights: Net weight (incl. control cabinet): approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection unit: Shot capacity: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed Standard/Option: 285/349 rpm Screw drive Standard or Stage 1: 95 PS Screw drive Option or Stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system Kodpoxu Uvaefx Al Nedk PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour screen and 3.5-inch floppy disk drive for data backup Plasticising: 1 complete screw plasticising unit for thermoplastics, wear-resistant version, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm 16426ä

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 35.000 h, vpenjalna sila: 100 kN, delovna prostornina: 51 cm³, tlak vbrizgavanja: 2.800 letvica, skupna masa: 5.000 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Kodjwlkb Nepfx Al Njdk

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Kedpfx Aswlkcajl Nsdk Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 60.790 h, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Kdsdpfxoh Tk Rvj Al Nsk Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Terms of payment: 100% net payment before collection of the machine Delivery time: to be agreed Kdjdpswz R Iujfx Al Nek Freight terms: ex works

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 70.000 h, vpenjalna sila: 120 kN, delovna prostornina: 154 cm³, tlak vbrizgavanja: 2.175 letvica, skupna masa: 7.300 kg, premer polžastega transporterja: 35 mm, Freight basis: ex works Delivery time: by agreement Payment terms: 100% prior to collection, net Manufacturer: Engel Model: VC Tech + ERC23/1-F Condition: from ongoing production Operating hours: approx. 70,000 CLAMPING UNIT: Kdedpfx Asqy Uklel Nok Clamping force: 120 t Opening stroke: 500 mm Min. mold height: 300 mm Max. mold height: - Platen dimensions (H x V): 790 x 680 mm Centres (nozzle/ejector plate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Shot weight in polystyrene: 141 g Stroke volume: 154 cm³ Injection pressure: 2,175 bar CONTROL: CC200 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 Air valves: yes Hot runner zones: - Robot interface: Engel integrated Other equipment: incl. ERC 23/1-F with integrated removal conveyor (opposite operator side) +750mm, needle shut-off (hydraulic + pneumatic), interface for color doser and temperature control unit. GENERAL DATA: Installed heating capacity: 9.2 kW Pump drive power: 15 kW Total connected load: motor + heater Total weight: 7,300 kg Overall dimensions L x W x H: 4.4 x 1.4+0.8 x 2.0 m

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 4.200 h, vpenjalna sila: 90 kN, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.400 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 30 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Kdodpjv S H N Rofx Al Njk

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 81.700 h, vpenjalna sila: 45 kN, delovna prostornina: 69 cm³, tlak vbrizgavanja: 2.400 letvica, skupna masa: 3.300 kg, premer polžastega transporterja: 25 mm, Freight terms: ex works Delivery time: by arrangement Payment terms: % prior to machine takeover, net Manufacturer: Engel Model: VICTORY 200/45 Tech + er/usp Condition: from ongoing production Operating hours: approx. 81,700 CLAMPING UNIT: Clamping force: 45 t Opening stroke: 355 mm Min. mould installation height: 175 mm Max. mould installation height: - Tie bar spacing (h x v): tie-barless Platen size (h x v): 550 x 430 mm Centering (nozzle/ejector plate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Shot weight in polystyrene: 63 g Stroke volume: 69 cm³ Injection pressure: 2,400 bar CONTROL SYSTEM: CC Screen languages: DE Kedperbqtnofx Al Nedk Operating manual: DE EQUIPMENT: Core pulls: 1 Air valves: - Hot runner control zones: - Robot interface: sprue picker er/usp Other equipment: hydraulic needle shut-off, interface for dosing and temperature control unit GENERAL DATA: Installed heating capacity: 6.8 kW Pump drive power: 11 kW Total connected load: motor + heating Total weight: 3,300 kg Overall dimensions (L x W x H): 3.3 x 1.2 x 2.2 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, ARBURG A 470 H 1000-170 HIDRIVE (32.000 h) (S&P 3796) Letnik: 2016 Obratovalne ure: 32.000 ur Premer polža: 30 mm Tlak vbrizgavanja: 2000 bar Kdjdpfxey D Rqzs Al Nok Vbrizgalni volumen: 85 cm³ Zapiralna sila: 100 t Razdalja med vodili: 470 x 470 mm Minimalna vgradna višina orodja: 250 mm Največja razdalja med ploščama: 850 mm Dimenzije: 4100 x 1700 x 2400 mm Teža: 5.030 kg Priključek: 21 kW Hidravlični akumulator, HHG EM67, EM 73, zračni ventil ipd. Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Letnik izdelave: 2015 Obratovalne ure: 25.109 ur Polž: 35 mm Tlak vbrizga: 2400 bar Volumen vbrizga: 192 cm³ Zapiralna sila: 120 t Razmak med stebri: 740 x 680 mm Min. vgradna višina orodja: 300 mm Maks. razmik plošč: 800 mm Mere: 5100 x 1500 x 2350 mm Teža: 7000 kg Priključek: 22 kW Kdsdjy D Rquopfx Al Nok Avtomatska vrata, enojni izvlek jedra, zračni ventil, ogrevanje orodja, nova cena 122.000,- € itd... Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Kjdjy D Rp Rspfx Al Nsdk Leto izdelave: 2015 Obratovalne ure: 25.008 ur Polž: 25 mm Tlak vbrizga: 2500 bar Volumen vbrizga: 59 cm³ Zapiralna sila: 150 t Razmak med stebri: 520 x 520 mm Minimalna vgradna višina orodja: 250 mm Največja razdalja med ploščami: 950 mm Mere: 4800 x 1700 x 2400 mm Teža: 6000 kg Priključna moč: 29 kW Vmesnik HHG EM67, zračni ventil ipd. Cena: po dogovoru Kontaktna oseba: gospod Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, ARBURG A 1500 T 2000-400 Vrtljiva miza (29.844 h) (S&P 3792) Leto izdelave: 2015 Obratovalne ure: 29.844 ur Polž: 40 mm Tlak vbrizgavanja: 2000 bar Volumen giba: 201 cm³ Zapiralna sila: 200 t Razmak med stebri: 1500 mm Min. višina orodja: 400 mm Maks. razmik plošč: 700 mm Dimenzije: 4700 x 2100 x 2600 mm Teža: 11.500 kg Priključek: 22 kW Kdodpfsy D Rpwsx Al Nsk Premer mize: 1500 mm, vrtljiva miza z 2 postajama (180°), dvojen izvlek jedra, izpiha naprava, vmesnik za barvni dozirnik, ogrevanje orodja, nova cena cca 250.000 € itd. Cena: po dogovoru Kontaktna oseba: g. Ralf Schulz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, ARBURG A 375 V 500-170 rotacijska brizgalka (S&P 3773) Leto izdelave: 2012 Delovne ure: 36.900 ur Polž: 25 HVF mm Tlačna sila brizganja: 2500 bar Prostornina hoda: 59 cm³ Kdsdpfxoy D Rpks Al Njk Zapiralna sila: 50 t Min. višina vgradnje orodja: 170 mm Maks. razmik plošč: 520 mm Dimenzije: 3300 x 1700 x 2100 mm Teža: 3740 kg Priključek: 11 + 11 = 22 kW Vertikalna brizgalka z 900 mm rotacijsko mizo, kot vrtenja levo/desno 180°, vključno z napravami za pozicioniranje v vodoravni položaj za brizganje v razdelilno ravnino, vključno s škarjastim dvigalom in zaščitnimi ploščami, HHG EM67, zračnim ventilom, EM73, ogrevanjem orodja itd... Nova cena cca 170.000,- evrov Cena: po dogovoru Kontaktna oseba: G. Ralf Schulz

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication Kjdpfxeyzz Ire Al Nedk - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, priključek za stisnjen zrak: 16 letvica, skupna širina: 387 mm, skupna dolžina: 565 mm, skupna višina: 1.007 mm, skupna masa: 75 kg, pritisk: 16 letvica, obratovalni tlak: 8 letvica, raven hrupa: 120 dB, dolžina paketa cevi: 7.000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing unit) for fine cleaning using micro-particles as well as aggressive blasting on demanding surfaces. The patented IS 10 dry ice mill allows you, when necessary, to crush 3 mm dry ice pellets into 1.5 mm micro-pellets, making it possible to clean sensitive surfaces such as polished components, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any compressed air loss. The operating pressure ranges from 1–16 bar. The compressed air supply hose is 10m long. The integrated flow system prevents freezing and subsequent clogging at the outlet of the hopper. The design of the tube and hose system prevents pellet breakage. The blasting gun is ergonomically shaped, robust, safe, and easy to operate. Optionally, the blasting gun can be supplied with an LED lamp. The stainless steel frame and machine housing guarantee a long service life. Even under the most demanding operating conditions, the machine requires only minimal maintenance costs. The stainless steel feed hopper has a capacity of 13 kg. The dry ice consumption ranges from 10–100 kg/h. Included accessories: - RN-10-08 round jet nozzle - Flex Case II Plus nozzle case (14 pieces) - External module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Belt-mounted compressed air regulator - 10m breathing air supply hose - Breathing air conditioning unit Kedowum Svopfx Al Nsdk - Ice scoop

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Kdodpfxoy Aldao Al Nek

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1,0 kos rabljena brizgalna stiskalnica Proizvajalec: KRAUSS MAFFEI Tip: KM420-2000CX Kjdpfx Ajy A Hl Eel Nodk Letnik: 2010 Zapiralna sila: 420 ton Razmak med stebri: 800 x 800 mm Premer polža: 70 mm Največji brizgalni volumen: 1.078 cm³ Teža brizganca: 981 g/PS Krmiljenje: MC5 Oprema: 2x vleka jedra Vmesnik za robota 12-consko upravljanje vročih kanalov Vmesnik za temperirno napravo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 ccm Clamping Unit: Clamping force: 400 t Tie bar distance: 820x820 mm Platen size: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic core pull, needle type, proportional valve controlled x 4 pairs Hot runner control x 24 Reinforced injection units – bimetallic Proportional valve on vertical injection unit – precise injection Machine with six cylinders / batteries with compressed nitrogen (extra charge for fast operation) Parallel movements Automatic mold height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Built-in pressure monitoring system by Sensor Kistler – mold pressure measurement Original Weber rotary table: highly precise, electrically driven by a servo motor controlled via frequency inverter Rotary table diameter: 1200 mm Rotary table available at additional cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes driven by electric servo motors: X, Y, Z (telescopic) Travel strokes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Robot available at additional cost Dimensions: Weight: 21,000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Kdodpfxjy Dq Awe Al Nok Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of Manufacture: 2011 Injection Unit: Screw Diameter: 60 mm Shot Weight: 607 g Injection Pressure: 2,000 bar Dosage Volume: 664 ccm Clamping Unit: Clamping Force: 320 t Tie Bar Distance: 0x0 mm Platen Size: 1,510 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Kdsdpsy Dq Aqjfx Al Njk Hybrid machine: high-speed, energy-efficient, and very quiet Operating Hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Controller with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter Highly precise rotary table, driven by servo motor and controlled by inverter Rotary table diameter: 1,500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor – mold pressure control Conversion of the injection unit for vertical operation is possible Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in a live technical test at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened – bimetal Machine equipped with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine features a system for setting the minimum mould height Robot – Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes are driven by servo motors (electric); C axis – pneumatic Axis stroke: X-1500, Y-2200, Z-800 Ksdpfx Aoy Dq Adsl Njdk Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Dosage volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570 x 570 mm Platen size: 795 x 795 mm Ejector: hydraulic Kodpfx Alsy Dqz Ts Nsdk Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional Equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface 6x air valves 4x hydraulic core pulls with proportional valve control Hot runner control Hardened injection unit - bimetallic Proportional valve on the injection unit – precise dosing Machine with two cylinders / battery with compressed nitrogen (extra capacity for fast operation) Machine is designed for operation with an electric rotary table. The machine is equipped with an inverter for servo motor control on the rotary table and an interface for rotary table connection Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/PS Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servo motors (electric); Axis C and A movement Axis travel: X-550, Y-1400 (telescopic), Z-3500 Touch panel control Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor at extra cost Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53 x 1.77 x 3.29 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: on request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 2011 Injection unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 ccm Clamping unit: Clamping force: 200 t Kdsdpfx Aljy Dqz He Njk Tie bar distance: 570x570 mm Platen dimensions: 795x795 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 12 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy-saving Injection unit is powered by servo motor, controlled by inverter Machine with cylinder / battery with compressed nitrogen (for rapid operation) Central lubrication Parallel movements Arburg Multilift Select 6kg transverse Robot Year of manufacture: 03.2011 4-axis robot: 3 axes driven by servo motors (electric); C-axis pneumatic Travel paths in axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt possible at additional cost Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Arburg 570C 2000-350/150 / Production Line with Side-entry Arburg Multilift Robot / 2K-Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 40 mm Shot Weight: 153 g Injection Pressure: 2120 bar Dosage Volume: 182 ccm Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA Additional Equipment: Production line with side-entry Arburg Multilift robot 2K machine / two-component Air valve x 1 Hydraulic core pull x 5 Hot runner control Reinforced injection units – bimetallic Proportional valves on injection units – precise molding Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up and tested by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Kdedjy Dqztepfx Al Nok Price: On request