Unbekannt Strojni Primež Z Vrtljivo Ploščo nakup rabljenega (49.791)

Stanje: rabljeno, Mechanical pull-down NC machine vice FRIBOSA, size type B Precision machine vice, grinding vice, clamp Jaw width: 100 mm Jaw height: 34 mm Clamping range: 0 to 130 mm Guideway height: 40 mm Guideway length: 270 mm Dcsdpfx Aeilx Ufjc Nsh - Mechanical machine vice - Clamping range adjustable via trapezoidal spindle - Sturdy base body, ground on all sides - Can be mounted horizontally, vertically, or laterally Dimensions (L x W x H): 310 x 100 x 77 mm Weight: 10 kg Good condition

Stanje: rabljeno, Single-column hydraulic press SCHÖN Type FES / C 7 Machine No. 4281 Year of manufacture 1995 Pressing force: 7 tons Throat depth: 170 mm Throat depth at rotary indexing station: 60 mm Table size: 310 x 200 mm Rotary indexing table: Ø 400 mm, with 12 indexing stations Ram area: approx. Ø 100 mm Ram plate: 315 x 200 x 35 mm Ram stroke: 100 mm Installation height (rotary table to ram plate): max. 130 mm Table height above floor: 890 mm Ram rapid traverse speed downward: approx. 300 mm/sec. Ram rapid traverse speed upward: approx. 300 mm/sec. Ram working speed: approx. 30 mm/sec. Dcsdpfor I E Itex Ac Noh Motor power: 1.5 kW Power supply: 380 Volt, 50 Hz Tank capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 stations - Mechanically adjustable fixed stop - Adjustable dwell time at BDC - Electric two-hand operation Space requirement (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition

Leto izdelave: 1980, stanje: dober (rabljeno), Equipment: 4 horizontal quill drilling units, 3 vertical quill drilling units Rotary table diameter: 400 mm Indexing rotary table: 60° division Dcsdpenvdmwjfx Ac Neh Weight: 2.6 t 1 control cabinet 1 coolant tank

Stanje: novo, moč: 235,36 kW (320,00 KM), vrsta goriva: dizel, največja dovoljena obremenitev: 8.500 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/70 R 22,5, konfiguracija osi: 4x2, medosna razdalja: 5.500 mm, gorivo: dizel, barva: bela, emisijski razred: Euro 6, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 2.460 mm, Oprema: ABS, dodatne luči, dvižna zadnja plošča, klimatska naprava, računalnik na krovu, spojler, 2-axle curtain-sided truck for 18 EPAL pallets New, unregistered. This Renault Trucks D 18 WIDE 320 2-axle curtain-sided truck is designed for short and medium-haul transportation. The vehicle has a gross vehicle weight of 18,000 kg and a payload capacity of 8,500 kg. EURO 6 engine, 7,800 cc, 320 HP, Optibrake engine retarder, 12-speed automated gearbox, 415-litre diesel tank, day cab with 2 seats, side deflectors and top spoiler, comfort driver’s seat, air conditioning, Bluetooth radio, fog lights, sun visor, rear air suspension, wheelbase 5,500 mm, tyres 315/70 R 22.5. Equipped with a fixed box body suitable for transporting 18 EPAL pallets, external dimensions: length 8,000 mm x width 2,550 mm. Aluminum sideboards divided into 3 sections, 800 mm high, 30 mm marine plywood floor, height-adjustable superstructure with electro-hydraulic system operable manually or by remote control, sliding side curtains with tensioning system, sliding roof, max overall height 4,000 mm, maximum usable side loading height 2,680 mm. Fitted with foldable hydraulic tail lift brand BAR, 2,000 kg capacity, 2 rear aluminum doors with double recessed locking bars, 2 fire extinguisher holders, folding front and rear orange warning panels. PRODUCT CODE: N-705C TYPE: Rigid truck (curtain-sided) EMISSION STANDARD: Euro 6 GROSS VEHICLE WEIGHT: 18,000 kg Dedpjr Dc Eysfx Ac Noch ENGINE: 6-cylinder, 7,800 cc BRAND: Renault Trucks INTERNAL USABLE DIMENSIONS: L 7,800 mm x W 2,480 mm PAYLOAD: 8,500 kg POWER: 320 HP RANGE: D series KM: 0 GEARBOX: Automated 12-speed EQUIPMENT: Fixed box, adjustable curtain-sided body, sliding roof, retractable hydraulic tail lift FUEL: Diesel WHEELBASE: 5,500 mm YEAR: New, unregistered

Stanje: rabljeno, Hidravlični strojevi primež, visokotlačni vpenjalec ARNOLD / FRESMAK Širina čeljusti: 160 mm Višina čeljusti: 50 mm Vpenjalna sila: 5 ton Obseg vpenjanja: 0 do 305 mm Maksimalna odprtina: 308 mm Višina vodila: 112 mm Dedpfoxp R E Tsx Ac Njch - 2 vpenjalna območja nastavljiva prek zatiča: 0 do 158 in 148 do 308 mm - z vrtljivo ploščo Dimenzije (D x Š x V): 580 x 325 x 165 mm Lastna teža: 65 kg Dobro stanje

Stanje: pripravljen za uporabo (rabljen), Allmatic-NC LC 160/200 svěrák, strojní svěrák Úroveň 1 = 15 kN Úroveň 2 = 30 kN Úroveň 3 = 45 kN Úroveň 4 = 60 kN Tlakový snímač není součástí dodávky! Rádi vás uvítáme na prohlídce. Rádi pro vás zajistíme cenově výhodnou dopravu! Obdržíte řádnou fakturu. Pro zahraniční zákazníky lze vystavit i fakturu bez DPH za předpokladu platného DIČ. Vyhrazen prodej z důvodu mezitímního prodeje. Dcedpeyilc Sjfx Ac Njh Navštivte náš obchod a podívejte se také na naše další nabídky. Uvedené názvy firem a ochranné známky jsou majetkem jejich držitelů a slouží pouze k identifikaci a popisu produktů. Odchylky od technických údajů a chyby v popisu položky jsou možné a vyhrazeny.

Stanje: delavnici obnovljeno (rabljeno), Rotary Table Polishing Machine from Bula, Model MP81 for sale. Continuously rotating automatic machine for polishing, brushing, grinding, and deburring a wide variety of workpieces. 6 workpiece holders mounted on a 250 mm pitch circle. 1 processing station, drive power 2.2 kW, equipped with Bula Quick Lock system for polishing discs. Polishing spindle diameter 25 mm. The machine has been completely overhauled: machine body sandblasted, primed, newly painted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled via frequency converters. Subject to prior sale. Optionally, the system can also be supplied with a liquid polishing compound system, consisting of 1 high-pressure dosing gun WIDOBERG HDP-2, bracket, timer, etc., and pressure vessel. Dedolccvmspfx Ac Njch WE CAN ALSO OFFER TO REPAIR OR REFURBISH YOUR EXISTING MACHINE OR A BULA MACHINE YOU ACQUIRE THROUGH ANOTHER CHANNEL.

Stanje: rabljeno, Leto izdelave: 1980, Workpiece diameter: 600 mm Workpiece weight: 400 kg Workpiece height: 300 mm Total power requirement: 35 kW Machine weight approx.: 4,500 kg E L B Horizontal Rotary Table Surface Grinding Machine Model: SWR 60 T NC-K Dsdpfxet Abrwe Ac Nech Year of manufacture: 1980 Serial No.: 169371080 _____ Grinding area: 600 mm Table diameter / Magnetic chuck diameter: 600 mm Infinitely variable table speed: 20 – 80 rpm Swing diameter approx.: 800 mm Max. grinding height above magnet: 300 mm Vertical movement of grinding head: 220 mm Cross-feed travel of grinding carriage: 320 mm Maximum table load: 400 kg Automatic vertical feed: 0.01 – 0.2 mm/stroke Grinding spindle speeds, steplessly adjustable: 1,000 – 2,400 rpm Grinding wheel diameter max.: 400 x 120 x 76 mm Grinding spindle drive approx. max.: 28 kW Total power: 35 kW – 380 V – 50 Hz Weight: 4,500 kg Accessories / Special equipment: - Control panel at the machine with adjustment options for stepless grinding spindle speed (potentiometer) and analog display of cutting speed in m/sec. as well as ampere display - Stepless table speed, infinitely variable cross-feed speed of the grinding carriage, and stepless vertical feed of the grinding wheel with ROUGHING/FINISHING/SPARKOUT, each adjustable via potentiometer, with dressing monitor for switching rapid vertical traverse to grinding carriage intermittent mode - Hand control panel with push buttons for manual machine operation, such as: dressing unit forwards/backwards, cross-slide forwards/backwards or creep feed, vertical slide up/down or creep feed - 2 preset counters for setting pre-dimension and finish-dimension with automatic shut-off Selector switch +1μ/-1μ, digital Y-axis display - Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and stroke - Built-in standard polarity magnet approx. 600 mm Ø - Freestanding control cabinet and separate small coolant pump Condition: satisfactory to good – ready for demonstration under power / ideal for reworking and calibration tasks, etc. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Here is the link to the video: Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: E L B (Germany) Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year 1980 Serial No. 169371080 _____ Grinding range, max.: 600 mm Table Ø / magnetic chuck Ø: 600 mm Workpiece swing Ø approx.: 800 mm Infinitely variable table speeds: 20 – 80 rpm Max. grinding height above table approx.:

Stanje: rabljeno, Leto izdelave: 1969, Rotary table diameter: 1000 mm Grinding height: 500 mm Grinding head drive power: 15/5.5 kW Total power requirement: 30 kW Machine weight: approx. 18 t Space requirement: approx. ... m S I E L E M A N N Vertical Rotary Table – Surface and Internal Grinding Machine with 2 grinding heads Type RFsB 100 #8185 Year of manufacture: 1969, but completely overhauled by the manufacturer in 1990 _____ Rotary table - face plate diameter: Ø 1,000 mm Distance from table center to column: approx. 1,150 mm Installation height table/grinding heads: approx. 500 mm Workpiece height: approx. 400 mm Reach of grinding heads: approx. 500/700 mm Max. workpiece weight: approx. 900 kg Table speed hydraulic, stepless, CW/CCW (14.5 kW): 5–60 rpm Table longitudinal stroke: approx. 550 mm Table feed (internal/external grinding): 0.0025 - 0.025 mm/stroke Table oscillation (stroke) / slow feed 0.2 m: 0.2 - 1,000 mm/min Table dwell time at stroke reversal: 0-10 sec. Grindable bore diameters: approx. 0–900 mm Grinding slide stroke for both heads: approx. 500 mm Maximum internal grinding spindle diameter: 140/100 mm Surface grinding head diameter (segment wheel): 450 mm Motor drives for surface and internal grinding heads: 15 / 5.5 kW Djdpfx Asu Su Apoc Nech Total drive approx. 30 kW - 380 V/50 Hz * Weight approx. 18,000 kg Accessories/Special equipment: • The rotary table rotates with the workpiece and also carries out the feed movement • The respective grinding head is swiveled in by turning the column (hydraulic lifting), so that the workpiece can be machined accurately in a single clamping operation • Additional height adjustment of the internal grinding slide by approx. 150 mm • Digital display of grinding wheel speeds • Grinding wheel dressing devices mounted on the grinding tower and can be swung in manually • Separate hydraulic system * separate control cabinet * • Magnetic chuck with stepless holding force adjustment, various small parts • Currently no coolant system The machine is ideal for grinding heavy and irregularly shaped workpieces, gears, ball bearings, housings and circular knives, and is highly versatile and accurate for other grinding tasks as well. Condition: good – soon ready for demonstration. A video can be found here: Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A wide range of other grinding machines always in stock – please inquire with us. Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and horizontal workpiece clamping Model RFsB 100 ...

Leto izdelave: 2026, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_03, Exhibition machine – like new. EVA Turntable / base frame raised / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Base frame raised by 150mm–200mm, adjustable for loading with electric pallet truck Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up and down Acoustic signal at cycle start and at cycle end Emergency stop switch in accordance with CE regulations Turntable always stops in the same start position Fall protection for the film carriage Dcjdpfx Acsykud Dj Nsh Push buttons for machine power-on and start & stop functions, compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Continuously adjustable turntable speed 5–12 rpm Carriage speed independently adjustable up and down F03 – Carriage speed up: 1.3–5.4 m/min F04 – Carriage speed down: 1.3–5.4 m/min F05 – Number of wraps at pallet base (1–10 revolutions) F06 – Number of wraps at pallet top (1–10 revolutions) F09 – Setting of pallet wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Simple wrapping (either upwards or downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a stored height (photoelectric sensor deactivated) F29 – Soft-start cycle for application of edge protection Soft-start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Maximum outside diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power requirements: 230 V – 1N+PE – 50 HZ Total output: 1.2 kW / 6 A Other systems available immediately from stock.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Lybra02, LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter: Ø 1,700 mm Height: 2,200 mm Max. pallet dimension: 1,200 x 1,200 mm Rotation arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, independently adjustable for ascent/descent Acoustic signal at wrap start and at cycle end stop Emergency stop switch according to CE regulations Positioning aid for precise pallet placement included in delivery Safety bumper for collision protection Push buttons for machine power-on and Start & Stop functions per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All operating parameters adjustable via display F02 – Infinitely adjustable turntable speed 5–12 rpm Carriage ascent and descent speeds independently adjustable F03 – Carriage ascent speed from 1.3 up to 5.4 m/min F04 – Carriage descent speed from 1.3 up to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photocell activation delay for wrap height F62 – Ergonomic height for film changing ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 3 programmable wrap cycles storable F01–1: Cross wrapping (upwards/downwards) F01–2: Single wrapping (only upwards or downwards) F01–3: Push button for manual operation F12: Wrapping to a programmed height (photo sensor for height disabled) F22 / F23: Wrapping cycle for top sheet film F29: Soft start cycle for edge protection placement Soft start cycle to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on film carriage Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE With electromagnetically braked roller Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Dsdoykudkspfx Ac Noch Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A; 1.75 kW / 8.5A (with PRS / PS) Manual rope forming also available as an option. Further machines available ex stock Ludwigsburg for immediate delivery.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 150 mm, višina čeljusti: 40 mm, širina vpenjanja: 160 mm, obseg vpenjanja: 200 mm, dolžina vpenjanja: 200 mm, - Izjemno stabilen in robusten - pnevmatski - skoraj nerabljen - na voljo 5 kosov Dedpfx Asx Rp Ekjc Nsch - nova cena nad 5000 EUR

Stanje: rabljeno, Used Alfa Laval "Centritherm" CT-6 vacuum disc rotary evaporator. Maximum water evaporation capacity approx. 800 kg/h. This is a complete evaporation unit consisting of: Dcjdpfxslc Dwve Ac Njh 1. Centritherm CT-6 vacuum disc evaporator, mounted on a platform 2. Alfa Laval plate heat exchanger, model P2-HL 3. Control panel 4. Feed pump 5. Concentrate pump 6. Condensate pump 7. Vacuum pump 8. Interconnecting piping 9. Mounting tools for disassembly of the discs and the drum itself

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, Naprodaj je začetni elektroerozijski vrtalni stroj bes S 43-3 Lastnosti - visoka hitrost vrtanja - majhna obraba elektrod Velikost mize (širina x globina): 450 x 210 mm Hodi X/Y/Z: 290 x 190 x 350 mm Motorizirana groba nastavitev Z: 250 mm Največja višina obdelovanca: 245 mm Največja teža obdelovanca: 200 kg Nastavitev vodila elektrode: 150 mm Premer elektrode: 0,3 – 10 mm Zunanje mere stroja: 1030 x 800 x 2100 mm Neto teža stroja: 600 kg Filtracija: kanister 20 l (standard) Programabilna Z-os standard Dcodpfx Aceir Eadj Nsh Več strojev takoj na voljo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4304, premer vrtljive mize: 600 mm, višina brušenja: 450 mm, skupna masa: 14.500 kg, Machine is equipped with 3 spindles: face grinding, external grinding, and internal (bore) grinding. Turret head on B-axis with 1° indexing. Band filter unit included. Dcedpfx Acovt A Rte Nsh

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, premer vrtljive mize: 320 mm, JUNG HFR30 or H30 mechanically and geometrically overhauled to JUNG new machine standards - new rotary magnet - new hydraulics 12 months warranty Delivery time: by arrangement Dcedpfx Acebwmamj Nsh We are happy to accept your used JUNG grinding machine in part exchange.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines that utilize a powerful rotary arm in combination with a reliable pre-stretch system to achieve precise wrapping of pallets. This advanced technology allows the load to remain stationary during the wrapping process. As a result, rotary arm wrappers are particularly suitable for pallets with lightweight or unstable goods, as well as for loads that are difficult to maneuver. - Maximum product height: 2,000 mm - Maximum pallet dimensions: 1,200 x 1,200 mm Dcedper Nc Spsfx Ac Neh - Minimum weight: 45 kg

Stanje: rabljeno, Mehanski NC strojni primež BISON Precizni strojni primež, vpenjalec Širina čeljusti: 150 mm Višina čeljusti: 40 mm Vpenjalna širina: 0 do 210 mm Vpenjalni tlak: cca 3 tone Višina vodila: 52 mm Dolžina vodila: 425 mm - mehanski strojni primež - hitra nastavitev z blokado z vpenjalno kroglico - vpenjalni razpon preko trapezne vretena cca 55 mm - stabilno osnovno ohišje, brušeno z vseh strani - uporabno vodoravno, navpično ali bočno - vodilo z utorom 18 in 20 mm Dimenzije D x Š x V: 425 x 150 x 110 mm Teža: 27 kg dobro ohranjen Dcodpfxsxcbpce Ac Nsh

Stanje: rabljeno, Mehanski visokotlačni strojni primež GRESSEL tip MHS 126-3 Visokotlačni vpenjalnik Širina čeljusti 125 mm Višina čeljusti 40 mm Odpiranje čeljusti 221 mm Vpenjalna sila 2 / 3 / 4 tone Višina vodila 62 mm - Vpenjalna sila nastavljiva v 3 stopnjah Dedpfx Aexlkvdec Noch - Visokotlačni vpenjalnik z mehanskim ojačevalcem sile - Razmik vpenjanja nastavljiv v 2 stopnjah - Stranski navoj za omejevalnik obdelovanca Mere 440 x 140 x 102 mm Teža 26 kg

Stanje: rabljeno, Mechanical NC machine vice TRIGO Type SCS 120-250, mechanical Precision machine vice, clamp Jaw width: 120 mm Jaw height: 20 / 55 mm Clamping range: 0 to 190 mm Clamping range with 55 mm jaw height: approx. 0 to 40 mm and 32 to 88 mm Clamping range with 20 mm jaw height: approx. 89 to 138 mm and 132 to 190 mm Clamping force: approx. 4 tons Guide groove (top jaws): 20 mm Slideway height: 80 mm Overall height with base jaws: 100 mm Bed length: 250 mm - Mechanical precision machine vise - 1 fixed jaw holder with 2 mounting positions (distance 50 mm) - 1 movable jaw holder with approx. 55 mm adjustment - Adjustment via trapezoidal spindle with 14 mm hex drive (Allen key) - Special grip reversible jaws with 3 mm grip step on both sides, pointed design for soft materials, type 87.120 - Robust main body, ground on all sides - Can be clamped horizontally, vertically, or laterally - Guideway with 18 mm guide groove, 6x M12, hole grid 100/100 x 80 mm Dsdpfx Acewki Ave Nsch Dimensions (L x W x H): 260 x 120 x 155 mm Weight: 22.5 kg Good condition

Leto izdelave: 1987, stanje: rabljeno, Kehren rotary table type RS 7C, used Manufacturer: Kehren, Honneff Reference no.: 4179 Year of manufacture: 1987 Control: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Control panel with display Coolant system Rinsing pump Coolant pump Automatic paper band filter system Dcedpehgmwgsfx Ac Noh Control cabinet

Stanje: potreben popravila (rabljeno), Leto izdelave: 2000, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 49299, premer vrtljive mize: 600 mm, višina brušenja: 400 mm, teža obdelovanca (maks.): 300 kg, premer brušenja: 500 mm, premer obdelovanca (maks.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Dcjdpfx Acoxr U T To Njh Table load: 300 kg Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Measuring system: incremental, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross-feed: 4–1,500 mm/min, adjustable Measuring system: incremental, rotary encoder, resolution: 0.001 mm Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirements (approx.): 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm EQUIPMENT Coolant system with paper band filter Grinding program NK Electronic handwheel, switchable for B-Y-Z axis Machine housing with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (cost € 3,712.50 + packaging and shipping).

Stanje: novo, Leto izdelave: 2026, Vice used for operations on grinders, milling machines, boring machines, EDM machines, CNC machines, and machining centers. Dsdsvxgugjpfx Ac Noch Features and Applications - Base made of high-durability cast iron, hardness approx. 40 HRC, fixed and movable steel jaws with hardness approx. 48-52 HRC - Adjustable jaw inserts allow for increased working area - Movable jaw design provides additional clamping force, securing the workpiece against the base - Permissible base height deviation: ±0.015 mm - Multiple vices can be used simultaneously - Designed for work on milling machines, CNC-controlled machines, and machining centers Technical Specifications QM16125N JAW WIDTH: 125 mm JAW HEIGHT: 38 mm MAXIMUM JAW OPENING L1: 112 mm MAXIMUM JAW OPENING L2: 165 mm MAXIMUM JAW OPENING L3: 250 mm MAXIMUM JAW OPENING L4: 305 mm CROSS SLIDE KEY WIDTH: 14 mm LONGITUDINAL SLIDE KEY WIDTH: 14 mm HEXAGONAL SCREW SHAFT HEAD: 14 mm DIMENSIONS: 338x126x106 mm WEIGHT: 16 kg

Stanje: novo, Leto izdelave: 2026, Properties and application Dsdpfx Acevxgq Us Noch - The body and movable jaw are made from high-quality cast iron - Interchangeable, grooved jaw inserts, induction hardened and ground - The use of a thrust bearing increases the efficiency of the clamping mechanism - Designed for clamping long workpieces utilizing the full length of the machine table - Equipment includes: hand crank, positioning keys

Stanje: novo, Leto izdelave: 2026, Properties and Application - Base made of highly durable cast iron, hardness approx. 40 HRC; fixed and movable steel jaws with hardness of approx. 48–52 HRC Dcsdpsvxgwzjfx Ac Njh - Changing the position of the jaw inserts allows for an enlarged working surface - The movable jaw design ensures additional clamping of the workpiece to the base - Permissible base height deviation: ±0.015 mm - Multiple vises can be used together - Suitable for use on milling machines, CNC machine tools, machining centers Technical Parameters QM16200N JAW WIDTH 200 mm JAW HEIGHT 50 mm MAX. JAW OPENING L1 190 mm MAX. JAW OPENING L2 275 mm MAX. JAW OPENING L3 385 mm MAX. JAW OPENING L4 470 mm WIDTH OF TRANSVERSE BAR 18 mm WIDTH OF LONGITUDINAL BAR 18 mm HEXAGONAL SCREW SHAFT HEAD 19 mm DIMENSIONS 517x200x135 mm WEIGHT 47 kg