Ovijalnik z vrtljivo roko Ovijalnik palet

ATLANTA LYBRA Easy

LYBRA EASY / 3 Programs

TECHNICAL DETAILS
Diameter: Ø 1,700 mm
Height: 2,200 mm
Max. pallet dimension: 1,200 x 1,200 mm
Rotation arm with high-resistance ball bearing
Height detection via photoelectric sensor
Frequency-controlled turntable drive (soft start/stop)
Frequency-controlled carriage speed, independently adjustable for ascent/descent
Acoustic signal at wrap start and at cycle end stop
Emergency stop switch according to CE regulations
Positioning aid for precise pallet placement included in delivery
Safety bumper for collision protection
Push buttons for machine power-on and Start & Stop functions per CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON CONTROL PANEL
All operating parameters adjustable via display
F02 – Infinitely adjustable turntable speed 5–12 rpm
Carriage ascent and descent speeds independently adjustable
F03 – Carriage ascent speed from 1.3 up to 5.4 m/min
F04 – Carriage descent speed from 1.3 up to 5.4 m/min
F05 – Number of wraps at pallet base (1–10 wraps)
F06 – Number of wraps at pallet top (1–10 wraps)
F09 – Photocell activation delay for wrap height
F62 – Ergonomic height for film changing

ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL
3 programmable wrap cycles storable
F01–1: Cross wrapping (upwards/downwards)
F01–2: Single wrapping (only upwards or downwards)
F01–3: Push button for manual operation
F12: Wrapping to a programmed height (photo sensor for height disabled)
F22 / F23: Wrapping cycle for top sheet film
F29: Soft start cycle for edge protection placement
Soft start cycle to reduce film tearing on sharp pallet edges

FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE
Manually adjustable brake roller on film carriage
Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm
Standard power requirements: 230 V – 1L+N+PE – 50 Hz
Bjdpfxoykudke Aqtewt
Total power: 1.2 kW / 6A

Optionally available:
FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE
With electromagnetically braked roller
Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm
Standard power requirements: 230 V – 1L+N+PE – 50 Hz
Total power: 1.2 kW / 6A; 1.75 kW / 8.5A (with PRS / PS)

Manual rope forming also available as an option.

Further machines available ex stock Ludwigsburg for immediate delivery.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.