9 kW vijačna kompresorska enota

KAESER AIRCENTER SM 16

Stanje: dober (rabljeno), Leto izdelave: 2008, Neposredno iz zaprte tovarne. Waldner Dosomat 12.6 (12 postaj, 6 v eni vrsti). Stroj je bil uporabljan za pakiranje aluminijastih pladnjev s steriliziranimi izdelki, kot je pašteta. Upravljanje preko Siemens zaslona na dotik. Stroj je v izvrstnem stanju, na voljo le zaradi zaprtja tovarne. Idealen za pakiranje paštet, hrane za hišne ljubljenčke ali mesnih namazov. Uporaben tudi za plastične pladnje in lončke. Kdsdpfx Asqgfaqsl Nek

Stanje: novo, Cutting capacity at 90° (round): 510 mm Cutting capacity at 90° (square): 450 mm Cutting capacity at 90° (rectangular): 650 x 450 mm Kdodpfjd Iipmjx Al Njk Blade speed: 15 – 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter bandsaw K-tech DG 62/45 HA-I • 2-column miter bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (disinfection) • Energy-saving and low vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure regulation valve • Hydraulic control of saw frame and clamping vice • LEDs for monitoring all safety functions • Large-diameter drive wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to material start or, in series cutting, directly cut 4. Saw blade off 5. Raise frame just above the material 6. Clamping vice opens

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Kedsd Eqqqspfx Al Njdk Upogib: 2 Debelina pločevine: 3 mm Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI DODATNO: kaljeni valji EURO 900,--

Stanje: novo, - Capacity: 1070 x 2 mm - Conical rolling - Removable top roll - Foot control - Emergency stop - Documentation - 400V Kdjdpohc Uvmjfx Al Nok

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. Ksdpfxjfz U S Ej Al Njdk - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Univerzalni orodjarski rezkalni stroj DECKEL FP 3 S troosnim aktivnim digitalnim prikazovalnikom Heidenhain TNC 11 Leto izdelave: 1984 Pomik: X 500 Y 300 Z 400 mm Območje obratov: 25 – 2500 min⁻¹ Z naslednjo opremo: Toga kotna miza 850 mm x 400 mm vpenjalna površina Zasukalna vrtljiva miza Ø 450 mm z delilnimi ploščami Stružna glava Premična navpična rezkalna glava Izvlečna vrtalna puša Brezstopenjski podajalnik preko potenciometra Različni rezkalni trni SK 40 / S22 x 2 Kad za ostružke Centralna mazalna črpalka (avtomatska) za osi X, Y, Z Strojna luč Hladilna naprava Kdedpfsxuh Rdsx Al Nsk 4 kosi strojnih nog Navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.730 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.335 mm, skupna širina: 750 mm, skupna višina: 1.880 mm, tlak (maks.): 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, raven hrupa: 66 dB, vrsta zaščite (IP koda): IP55, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective delivery rate: 1.67 m³/min Rated drive motor power: 11 kW Drive motor protection class: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1,335 x 1,880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration Dryer Power consumption: 0.49 kW Pressure dew point: 3 °C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment to EN 60204-1: Yes Scope of delivery: – Complete original documentation – 2x RFID cards Ksdpfoxnnd Dox Al Nsdk – 5 m supply cable with 32A plug

Stanje: novo, Leto izdelave: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roller diameter: 110 mm Lower roller diameter: 110 mm Bending roller diameter: 110 mm Total power requirement: 1.1 kW Machine weight approx. 0.9 t Kdjdovx Uvxepfx Al Njk Space requirement approx. 2.5 x 0.6 x 1.1 m New machine Conical bending device, hardened and ground rollers, motorized bending roller, stationary control panel, digital display for right and left bending rollers, digital display for lower roller

Stanje: novo, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Kedpfx Alspk Iv Ue Nedk Machine weight: approx. 0.32 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 to 890 mm Underside reinforced with ribbing. Including floor bearing Optional accessories available! Surface flatness: 0.2 - 0.4 mm per 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), GENSTAND: A-QB1200, PULVERBLANDER FOODTECH Dissolver-blanderenhed PU133 Mærke: QB Food Tech. Type: QB 1200 Kapacitet: 1.200 liter Dobbeltkappet til køling/varme. Kodopcg Haopfx Al Nodk Omrører. Vejeceller.