Thermotron Temperaturna Komora nakup rabljenega (632)

Stanje: dober (rabljeno), CTS Model: TSR-30/1000 Water-cooled The CTS cabinet series type designation is composed as follows: Example: Type TSR-30/1000 1) T stands for: Temperature Iedpfx Ajrivfcsb Aoib 2) S stands for: Stress Screening 3) R stands for: External Conditioning 4) -30 means: minimum temperature -30 °C 5) 1000 means: 1000 liters test chamber volume Technical specifications: A) TSR-30/1000 base unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature Testing: Temperature range: -40°C to +180°C Final temperature: -45°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 6.0 K/min Cooling: 5.0 K/min Heat dissipation: approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to ambient temperature of +25°C, rated voltage 400V, with no test samples, no heat dissipation, and no additional equipment. Air flow volume approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to a customer-supplied external test chamber Temperature Testing: Temperature range: -30°C to +170°C Temperature deviation: ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured with closed-loop: Heating: 4.0 K/min Cooling: 4.0 K/min within the range from +150°C to -10°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without test samples, no heat dissipation, and no additional equipment, measured with closed-loop. Note: The customer-supplied external test chamber must be completely sealed and properly insulated; any leadthroughs must be optimally sealed by the customer. Dimensions: Test volume: 1000 liters Air recirculation port: Ø 200 mm Test chamber dimensions: Height 900 mm, Width 1000 mm, Depth 1100 mm External dimensions: Height 1950 mm, Width 1270 mm, Depth 2245 mm Technical design: Refrigeration unit: Water-cooled, low-noise fully hermetic Infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully openable door, hinge on the left, one-hand operation, lockable. Insert rack: Stainless steel, support surface 970 x 980 mm Maximum load per rack: 35 kg Maximum total load with full rack installation: 100 kg Test chamber lighting: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 13.3 kW Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 850 kg Your safety as buyer – the following is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of supply: (see picture) (Specifications may change or contain errors. Subject to alteration!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate Iiedpfjtz Rqmex Ab Aeb 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation in center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature gradient (per IEC 60068-3-5): 1 to 4 K Temperature change rate (per IEC 60068-3-5): Heating: 4 K/min Cooling: 3 K/min Heat compensation: max. 4500 W Feedthrough included as standard R1: NW 125 mm L1: NW 50 mm Dimensions: Internal chamber dimensions (W x D x H): 1100 mm x 950 mm x 950 mm External dimensions (W x D x H): 1390 mm x 1525 mm x 1995 mm Maximum distributed load (test chamber floor): 150 kg Per shelf: 50 kg Total shelf load: 100 kg Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat emission (for water-cooled cabinets): max. heat output to ambient 1.3 kW Noise emission: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 Important Safety Information for Buyers: The following procedures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant Iiodpfx Aop Dun Ueb Asb 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and information!) If you have further questions, we are happy to provide information by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Test Chamber We are offering a temperature test chamber. Weiss Temperature Test Chamber, water-cooled Technical specifications: Test chamber designation: WT-600/70 External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Cooling/Heating operation: -70°C to +180°C Ijdpfjiqk Abjx Ab Asib Temperature change rate: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Required fuse (on-site): 32 A slow-blow Permissible test specimen weight: Total shelf load: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Refrigerant: R 404A/R23 Weight: 675 kg Type: WT-600/70 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), RS simulators Here we offer a temperature test chamber. Air-cooled Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x Height 520 mm x Depth 500 mm External dimensions: Width 820 mm x Height 1750 mm x Depth 1300 mm Power consumption: 13.5 A Iisdogl Acrepfx Ab Ajb Supply voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Model: TS 150/45 (50) Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data, all information is without guarantee!) If you have any further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Cooling rate: 5.0 K/min Heating rate: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, we provide the following information! The following steps are carried out on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components Iijdpsir D U Dsfx Ab Aeb 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) For further questions, please do not hesitate to contact us by phone.

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Iiodevitmdspfx Ab Asb Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VTS 7018-5 Iijdpswq Iymofx Ab Aob Water-Cooled Temperature Test Chamber Unit retrofitted to R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3000 W Heat compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.0 kW, Rated current: 21 A Main fuse (customer side): 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement):

Stanje: zelo dobro (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Plain text error messages - RS 232 interface - Free switching channels for test specimen control by customer Technical Specifications Temperature Tests: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2500 W at 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without irradiation and without extra equipment. Ijdpfxeu U Ixmo Ab Aoib Dimensions: Test volume: 600 liters Test chamber interior (HxWxD): approx. 850 mm × 850 mm × 830 mm Exterior dimensions (HxWxD): approx. 1900 mm × 1120 mm × 1875 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Important information for you as the buyer! The following steps are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; all data provided without guarantee!) Please feel free to contact us by phone for any further questions.

Stanje: zelo dobro (rabljeno), ENGLISH: Espec Type: TSA-202E-W Water-cooled thermal shock chamber Cold zone: -55°C to 0°C Hot zone: +50°C to 200°C System: Two-zone test via damper switching Temperature fluctuation: ±0.5°C Hot chamber: Heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Cooling time: Ambient temperature (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz; 65 A Refrigerants: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following points are carried out in advance of delivery on our offered chambers: 1. Functional check and replacement of necessary components. 2. If necessary, refill with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Iedewc R A Iepfx Ab Ajib Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and error!) We will be happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Type: VT 7021 Temperature Test Chamber, Air-Cooled Iedewylv Depfx Ab Aoib 1 Feedthrough, DN 80 mm Test Chamber Volume: 210 liters Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ± 0.2 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate Heating: 2.5 K/min Temperature Change Rate Cooling: 2.5 K/min Max. Heat Compensation: 800 W Test Chamber Dimensions: Width 560 mm x Depth 570 mm x Height 630 mm External Dimensions: Width 850 mm x Depth 1250 mm x Height 1640 mm Electrical Connection: 1/NPE AC 230V ± 10% 50Hz Rated Power: approx. 1.8 kW Rated Current: 12 A Refrigerants: R404A and R23 Weight: 355 kg Important Information for Buyers: For your safety, the following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical specifications and information) Further questions can be answered by phone.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Iiodpfxsihb Amj Ab Asb Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm Iisdpfx Abexdi Eze Aob • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber, Climate Chamber VLM 3068/S Air-cooled (top-loading test chambers for building materials) Control Panel The control panel is mounted on a console on top of the temperature test chamber. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Treatment Chamber The air treatment chamber is located inside the test chamber and contains the assemblies necessary for temperature control. In the air treatment chamber, the air is conditioned (heated/cooled) and circulated by the test chamber fan. Air is drawn in through the center of the side wall and re-enters the test chamber via air duct panels located along the longitudinal sides. Iisdpfx Aorbiyfjb Ajb Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs, allowing cables and test equipment to be introduced into the test chamber. Feedthroughs: front 2 x 82 mm Ø, rear 1 x 85 mm Ø Internal Dimensions: Width 2000 mm x Depth 570 mm x Height 600 mm External Dimensions: Width 3000 mm x Depth 870 mm x Height 1060 mm Technical Data: Mechanical loading data: Max. load for specimens/test material Test chamber floor (evenly distributed) 600 kg Point load 50 kg Temperature test data: Temperature range: -30°C to +125°C Temporal temperature deviation at center of working space: ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Operational data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise level: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors; all information is without guarantee!) Further questions can be answered by phone.

Stanje: rabljeno, CTS Model: TS -70/600-13 Water-cooled Temperature Test Chamber Series: TS -70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Test chamber volume: 600 liters Internal chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Iiodpfovcyawex Ab Asb Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1K over time, ± 0.5 K spatially Electrical connection: 400V / 3-phase / N / PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressors: 4TC-8.2Y / 4PC-10.2Y Refrigerants: R-404A / R-23 Weight: 1350 kg For your security as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Converted to R452a Weiss Temperature Chamber, air-cooled Temperature range: from -30°C to 180°C Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min Test space dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A Refrigerant: R452a Weight: 515 kg Model: WT1-340/30 Iiodpfxoic Rgfe Ab Ajb For your safety as the buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Changes and errors in the technical data and information are reserved!) If you have any further questions, we are happy to answer them by phone.

Stanje: dober (rabljeno), Vötsch Iodpfoxzgn Isx Ab Aoib Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm x Width 800 mm x Depth 650 mm External dimensions: Height 2025 mm x Width 1000 mm x Depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to ± 0.8 Spatial temperature uniformity: ± 0.5 to ± 2 Cooling rate: 10 K/min Heating rate: 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 480 liters Left: 1x side port ∅ 125 mm Left: 1x side port ∅ 50 mm Right: 1x side port ∅ 125 mm Chamber is water-cooled Test chamber lighting: Halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404 A / R-23 Weight: approx. 1250 kg For your security as buyer, please note the following information: The following points are carried out in advance for the chambers we offer: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change or error!) For further questions feel free to contact us by phone.

Stanje: rabljeno, Hladilna/zamrzovalna komora -Zunanje mere: 3135 x 1385 x 2260 mm Iodpfx Abexqc Rko Asib -Notranje mere: 2970 x 1225 x 2100 mm -Debelina panelov: 80 mm -Svetla širina vrat: 750 mm -Stenska hladilna enota vključena -Skladiščno stanje: 1 kos -Komora enostavna za montažo

Stanje: rabljeno, Hladilna/zamrzovalna komora Viessmann -Zunanje mere: 3300 x 2100 x 2450 mm Iisdpfsxqpgrjx Ab Ajb -Notranje mere: 3100 x 1900 x 2250 mm -Deblina plošč: 100 mm -Svetla širina vrat: 800 mm -Tla iz nerjavečega jekla -Stenski hladilni agregat vključen -Stanje zaloge: 1 kos -Komora enostavna za montažo

Stanje: zelo dobro (rabljeno), Here we offer you a Thermotron environmental test chamber. Thermotron Environmental Test Chamber, Water-Cooled Iijdomhfr Ispfx Ab Aob Working Volume: 227 liters Temperature Uniformity: All models 0.7°C Temperature Range: -70°C to +180°C Temperature Control Tolerance: All models 0.3°C Shipping Weight: approx. 400 kg Internal Dimensions (W x D x H): 610 mm x 610 mm x 610 mm External Dimensions (W x D x H): 890 mm x 1240 mm x 1850 mm Humidity Range: All models 10% to 98% RH Humidity Control Accuracy: All models 2.5% RH Heating Capacity (minutes, from -65ºC to 71ºC): 17 Heating Capacity (minutes, from -65ºC to 180ºC): 43 Heating Capacity (minutes, from -40ºC to 85ºC): 16 Electrical Requirements at full load (230V/3Ph/60Hz): 19A Electrical Requirements at full load (230V/1Ph/60Hz): 25A Electrical Requirements at full load (220V/1Ph/50Hz): 27A Cooling Capacity (minutes, from 85ºC to -40ºC): 32 Cooling Capacity (minutes, from 71ºC to -65ºC): 54 Cooling Capacity (minutes, from 180ºC to -65ºC): 72 Compressor Size: (2) x 2 Hp Operating Voltage: 400V / 16.7 A Type: SM-8-8200 Condition: used Scope of delivery: (see photo) (Specifications and details are subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Hladilna/zamrzovalna komora Viessmann Iijdpfjy S An Isx Ab Asb - Zunanje mere: 2400 x 2100 x 2150 mm - Notranje mere: 2200 x 1900 x 1950 mm - Debelina panelov: 100 mm - Svetla širina vrat: 800 x 1800 mm - Tla iz nerjavečega jekla - Hladilna enota in kondenzator vključena - Na zalogi: 1 kos - Komora z enostavno montažo

Stanje: rabljeno, Hladilna/zamrzovalna komora Viessmann - Zunanje dimenzije: 3600 x 2100 x 2150 mm - Notranje dimenzije: 3400 x 1900 x 1950 mm - Debelina panelov: 100 mm - Svetla vrata: 800 x 1800 mm Iiodjy Sxrcepfx Ab Asb - Tla iz nerjavečega jekla - Komplet z agregatom in uparjalnikom - Zaloga: 1 kos - Komora enostavna za montažo

Stanje: rabljeno, Hladilna/zamrzovalna komora Viessmann - Zunanje dimenzije: 3600 x 2400 x 2150 mm - Notranje dimenzije: 3400 x 2200 x 1950 mm - Debelina plošč: 100 mm Iodpfx Absy Sxqfe Aoib - Svetla širina vrat: 800 x 1800 mm - Tla iz nerjavečega jekla - Hladilna enota in uparjalnik vključena - Stanje na zalogi: 1 kos - Komora je enostavna za montažo

Stanje: dober (rabljeno), UNHOLTZ-DICKIE / HS Simulators Vibration Test System Model: TA117SA-560 + HS 520 K 60 V Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulatoren Horstmann GmbH For sale is a complete electrodynamic vibration testing system consisting of a UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, as well as an HS-Simulatoren climate test chamber. Ideal for combined vibration and environmental testing in industrial, automotive, aerospace, electronics, as well as research and development applications. The overhead crane and other hall equipment shown in the images are not included in the scope of delivery. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Model: 560 System: TA117SA-560 Serial Number: 259 Air-Cooled Electrodynamic Shaker Sine Force: 6000 lbf peak / 26.7 kN peak Random Force: 5200 lbf RMS / 23.1 kN RMS Max. Acceleration (bare table): 100 g / 981 m/s² Shaker Stroke: 1 inch / 25.4 mm Axial Resonance Frequency: approx. 2200 Hz / approx. 2.2 kHz Armature Effective Weight: 45 lb / approx. 20.4 kg Driver Coil: 200 A Sine 140 A Random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Model: SALL50F Power Amplifier Serial Number: 4414 Iiedey S S Eiopfx Ab Asb Power Module: PML-50-S Master Controller: MCLL50 Supply voltage: 400 V / 3 Phase / 50 Hz Power consumption: 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum Driver Currents: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Forced air cooling / air cooled. Controller UNHOLTZ-DICKIE VWIN II DSP Vibration Control System incl. industrial PC / monitor as shown in images Control Console: MA117SA-560 Serial Number: 1838 Charge Amplifier: Type 122P Serial Number: 8963 Supported Test Modes: Random Vibration Sine Vibration Resonance Dwell Classical Shock Pulse SRS Shock & Analysis Sine-on-Random Random-on-Random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulatoren Climate Test Chamber Manufacturer: HS-Simulatoren Horstmann GmbH Model: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerants: R13 R502 Equipment - Combined environmental and vibration testing - Complete electrodynamic test system - DSP-based real-time control - Forced air cooling system - Fully wired test system Original documentation available: - Operating manual - Maintenance manual - System specifications - System diagrams - Performance curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climate chamber: approx. 1200 x 1800 x 2000 mm Total estimated weight: approx. 2500 – 4000 kg Transport exclusively by suitable heavy-load forwarder. Some technical data are estimated. Details may vary. Condition Used system from industrial operation. Visual condition as shown in images. Functionality not fully tested. Inspection by prior arrangement possible and recommended. Scope of Delivery - UNHOLTZ-DICKIE Shaker Model 560 - SALL50F Power Amplifier - Control console / regulation system - VWIN II controller system - Charge amplifier - HS-Simulatoren climate test chamber HS 520 K 60 V - Industrial PC / monitor as per images - Documentation and accessories as per images Loading by arrangement possible. Commercial sale without warranty. Subject to errors and prior sale.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, air-cooled (The compressor has been replaced!) Specification: Iisdpek E Htyefx Ab Ajb - Temperature range, hot chamber: +60°C to +220°C - Temperature range, cold chamber: -10°C to -80°C - Transition hot/cold chamber: 10 s - Temperature stability: ±1 K Dimensions and further data: - External dimensions: height 1990 mm - Width (without/with swing arm): approx. 1820 mm / approx. 1915 mm - Depth (without/with test chamber door): approx. 900 mm / approx. 1155 mm - Lifting basket (test chamber) dimensions: height 450 mm, width 500 mm, depth 600 mm - Volume: 130 liters - Max. load for test chamber: 20 kg - Max. load for test chamber floor: 20 kg - Cooling water pressure: min. 2 to max. 6 bar - Max. pre-fuse: 35 A (32 A CEE plug) - Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerant: R 404A / R23 - Weight: approx. 950 kg - Type: TS 130 - Condition: used - Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.