Paternoster Za Sistem Shranjevanja Majhnih Delov nakup rabljenega (87.713)

Stanje: novo, General Minimum diameter of workpieces: 25 mm Maximum diameter of workpieces: 270 mm Minimum size of hexagonal workpieces: 25 mm Maximum size of hexagonal workpieces: 200 mm Maximum stacking height: 2 x 350 mm Maximum stack weight: 2 x 450 kg Length of automation: 1,902 mm Width of automation: 740 mm Height of automation: 2,202 mm Total system weight: 1,000 kg Electrical connection: 380 VAC Pneumatic consumption: < 100 L / min Robot Payload: 25 kg / 19 kg net Payload: 35 kg / 28 kg net Kedpfxoh Dw Dij Al Nelr Safety Standard Safety with laser scanner Protection via integrated wall Option Protection via light curtain Protection via separate mesh wall Protection via separate transparent wall Protection via sliding doors

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Klodpfx Alsy Aldaj Nor

Stanje: rabljeno, Leto izdelave: 1989, Machine d'occasion Petite machine pour l'usinage de pièces formées Traite des matériaux de chant revêtus d'une colle thermofusible, qui est réactivée à l'aide d'air chaud L'avance de la pièce est automatique par pression contre le rouleau presseur central motorisé, assurant ainsi une réactivation régulière de la colle et une fiabilité de collage Régulation de température thermostatique avec thermostat à aiguille Soufflante à air chaud triphasée, sans entretien, pour fonctionnement continu Déviation automatique du flux d'air Dispositif de séparation de rouleau actionné pneumatiquement, coupe même les chants de placage et PVC les plus résistants Commande par pédale pour l'usinage de pièces formées Épaisseur de pièce : 10 - 50 mm Kjdewwxykjpfx Al Nslr Puissance de chauffage : 3 kW Puissance raccordée : 3,3 kW Largeur minimale de la pièce : env. 25 mm Épaisseur des chants : env. 0,5 - 1 mm Rayon intérieur minimal : env. 25 mm Avancement : 4 m/min Pneumatique : 6 bar Poids : env. 105 kg Disponibilité : court terme Emplacement : Röllbach

Leto izdelave: 2008, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The system was used for grinding oil filtration in carbide machining applications. Cooling unit: Eckert 3 filter towers with sludge bag Filtration capacity: 80-100 l/min Filtration fineness: 3-5 µm The description refers to the system with a sludge drum; technical data are similar. Original user manual available in hard copy. Klodslczcwepfx Al Njr Videos available upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, For sale due to closure of a craft bakery: a WP roll production line, year of manufacture 1995. Installed upstream is a WP Multimatic, a proofing cabinet (retarder/proofer), and a WP stamping station. Kledpfx Aljuqw Drs Nsr Please note: The dismantling of the equipment must be carried out by the buyer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Na voljo je popolna plastna paletirna linija IW-Anlagentechnik z ovijalcem palet Tosa in potisno tehnologijo. Procesna veriga: dovod izdelka – tvorjenje plasti – paletizacija – transport – ovijanje. 1) Paletirni sistem IW-Anlagentechnik PMS 120, letnik: 1992, rotacijska enota: 90°. 2) Transportna tehnika Transpak. 3) Rotacijski stretch-ovijalec Tosa 124E, letnik: 2010. Linija se je uporabljala v živilski industriji za paletiranje steklenic in drugih posod za tekočine. Dokumentacija je na voljo. Možen je ogled na lokaciji. Kljdpjy Eg Dgsfx Al Ner

Stanje: rabljeno, Leto izdelave: 2018, Technical data: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine height at 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Washing tank: 900 l Rinsing tank: 900 l Oil separator: 200 l Kljdewf U Ruspfx Al Ner

Stanje: dober (rabljeno), Peskalna naprava z steklenimi kroglicami, z odsesovanjem in reciklažo abraziva Kedpfxoyzalps Al Njlr

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi Kodjy Aagispfx Al Nslr 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah

Stanje: novo, Leto izdelave: 2026, Spray Cleaning System Type SM11 Robustly constructed parts cleaning system with basket drive via gear motor, made of stainless steel 1.4301, - Three-sided stainless steel nozzle system, incl. stainless steel flat-jet and spot-jet nozzles - Automatic steam extraction fan - Fine filter incl. pressure gauge (size 4) - Coarse filter (removable basket) in the return flow - Oil skimmer for bath maintenance - Timer for adjustable wash cycle - Electronic lid monitoring - Stainless steel wash pump (manufacturer: Ebara) - Level sensors / dry-run protection - Drain connection with ball valve Kledpfx Aopm Ed Eel Nor - Basket diameter: 1,100 mm - Usable height: 700 mm - Max. loading weight: 250 kg - Spray pressure: 3 bar - Tank volume: 260 liters - Heating: electrically adjustable (RT - 75°C) - Connected load (electric): approx. 12.5 kW - Machine dimensions (WxDxH): 1,500 x 1,600 x 2,500(h) mm (with lid open)

Stanje: novo, Leto izdelave: 2026, Spray Cleaning System Type SM11 Heavy-duty two-tank parts cleaning unit (washing + rinsing) with basket drive via gear motor, constructed from stainless steel 1.4301. - Three-sided stainless steel nozzle systems including flat and spot-nozzles made of stainless steel - Full system insulation - Automatic steam extraction fan - Side channel blower with air knife for parts drying - Oil skimmer for bath maintenance in the washing tank Kledpjq T H Siofx Al Njr - Automatic fresh water refill for both tanks - Timer for washing cycle setting - Electronic lid monitoring - Coarse filter (removable basket) per tank on the return line - Washing pumps made of stainless steel (Manufacturer: Ebara) - Level sensors / dry run protection - Drain connection with ball valve Control system: Siemens Logo - Basket diameter: 1,100 mm - Usable height: 700 mm - Max. load weight: 250 kg - Spray pressure: 3 bar - Tank volume tank 1: 260 liters, tank 2: 140 liters - Heating: electronically adjustable (room temp. – 75°C) - Connected load (electrical): approx. 20 kW - System dimensions (WxDxH): 1,800 x 2,000 x 2,350(h) mm (with lid open)

Stanje: zelo dobro (rabljeno), SISTEM ZA DOVAJANJE IN DOZIRANJE MATERIALA – COLORTRONIC S 3 KOMPONENTAMI, POPOLNOMA Z NADZORNO ENOTO Kedpfjyh Htcsx Al Nslr

Stanje: zelo dobro (rabljeno), SISTEM ZA TRANSPORT IN DOZIRANJE MATERIALA - AZO (4xRazdelilniki) Kljdpfxsyh E Ras Al Ner

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION (“BOOK ON DEMAND”) AND SHORT RUNS TECNAU LIBRA 800 Intended use: Suitable for imposition and processing of short print runs and single books (“books of one”) with varying sizes, page counts, and covers. Klsdpjylyhdefx Al Njr Productivity: from print run of 1; up to 800 copies per hour Book format: min.: 100 x 125 mm / max.: A4 Thickness: min.: 2 mm / max.: 60 mm Equipment / additional information: Line configuration: 1. Roll feed: unwinder, merger, Dupla cutting machine, and book assembly station for the production of book blocks with 2-up printing 2. Sheet feeder: A variable number of loose sheets can be inserted into the book block as inserts. The sheets must be the same size and print run as the book block to be processed. 3. Feed to binding machine: Station for manual feed of pre-assembled book blocks, transfer with document scanning station, book turning module, and loading robot at the binding machine 4. Variable binding machine for production of softcover books. The binding machine is equipped with PUR glue on the spine and hot-melt adhesive on the sides of the book. 5. Softcover cover machine, configured with sheet cover feeder: already printed cover sheets are fed in, trimmed at the front, side-trimmed, and creased to the correct size to match the thickness of the associated book block. 6. Cooling tower/cooling spiral (product-specific) not included in scope of delivery; can be ordered depending on customer requirements (product type). The cooling conveyor can be configured according to space requirements and installation conditions. Price of conveyor depends on configuration. We will be happy to advise you on selecting the suitable conveyor. 7. Variable three-knife trimmer for trimming books with three-dimensionally variable formats and different cover types. 8. Line control software Finishing line The entire process is managed via 2D data matrix codes. Through the code, the system receives release for the following automatic setups and workflow controls: • Information on book dimensions and inserts (quantity and sequence) • Setup of the binding machine (spine position, thickness, and length) • Cover preparation: softcover → creasing, cutting, edge trimming • Correct cover-to-book matching • Three-knife trimmer (knife positioning is automatically set according to book size) Very good condition // Disassembly, machine packaging, and securing (insurance for transport of the machine) will be carried out by the manufacturer / Tecnau.

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 Kedpfod H Rf Tex Al Njlr • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Kljdpfx Alsvvkips Njr Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. - Fully encapsulated housing for a clean operating environment.

Stanje: rabljeno, Leto izdelave: 2018, Nazivni volumenski pretok: 5087 m³/h Podtlak (Pa): 2300 Motor: 7,5 kW Dimenzije: 1080 x 820 x 860 mm Teža: 154 kg Skladiščna lokacija: Nattheim Klodpevxk Ansfx Al Ner

Stanje: pripravljen za uporabo (rabljen), Na voljo je slojni paletizer Happel. Izdelki: vreče/škatle/enote/posode/sodi, obračanje paketa: 90°/180°/270°, format palete: 800mm/1200mm, največja višina palete: 1500mm, najmanjše dimenzije izdelka X/Y/Z: 150mm/150mm/40mm, največja teža sloja: 150kg, največja zmogljivost paletizacije: cca. 2500 kosov/h. Dimenzije stroja X/Y/Z: cca. 4000mm/2600mm/2500mm, teža: cca. 2500kg. Možen je ogled na lokaciji. Ksdey Dup Ijpfx Al Nolr

Stanje: zelo dobro (rabljeno), Für Platten mit den Maßen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm - Nr. 2 Doppel-Deck-Zuführrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang - Hydraulischer Hubtisch (ca. 5600 x 2700 mm) - System mit Gummirädern (11 oben + 11 unten) zum Andrücken und Zuführen der Platten - Fahrbare Traverse mit 45 Saugern und 5 Auflagearmen (zur Ausrichtung des Plattenstapels) - 1. Rückseitiger Schieber mit 11 Spannzangen - Drehtisch (für 90°-Drehung der Platte) mit Kunststoffrädern - 1. Plattensäge AH8 580 - max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) Klodpfx Asxvc Rzel Njr - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Fahrbare Quertraverse mit 7 Schiebergeräten für geschnittene Platten - Mit 4 Auflagearmen (zur Ausrichtung des Plattenstapels) und 3 motorisierten Ketten - 2. Rückseitiger Schieber mit 25 (27) Spannzangen/Greifern - 2. Plattensäge - max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Restholzentsorgungssystem mit VECOPLAN-Zerkleinerer (55 kW) - Tisch mit Kunststoffbeschichtung für den Zuschnittauslauf - Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftausblassystem 400 x 6300 mm + 8 Hubtischen (4 x 1300 x 1600 mm und 4 x 1300 x 1410 mm) - Gesamtanschlusswert: 130 kVA

Stanje: rabljeno, Leto izdelave: 1996, Charge weight: 260 liters External tank diameter: 1,300 mm Tank diameter / tank height: 1,150 / 500 mm Working basin width: 300 mm Motor power: 1.5 / 3.0 kW Motor speeds: 985 / 1,480 rpm Operating voltage: 400 V Machine weight: approx. 740 kg Space requirement: approx. 1.50 x 1.30 x 1.25 m Vibratory finishing machine - Serial no.: 15770 / 96-08 Kjdpfx Alewa Uhps Nslr - Machine ON time: 37,851 h - Timer

Stanje: rabljeno, Obtežni volumen 125 litrov Zunanji premer posode 1.000 mm Premer/višina posode 920 / 480 mm Širina delovne kadi 210 mm Obratovalna napetost 380 V Teža stroja pribl. 630 kg Prostorske zahteve pribl. 1,10 x 1,50 x 1,30 m - Obratovalne ure: 4.402 h Kjdpfx Alsv R Hwxo Nolr - Gumirana obloga še v zelo dobrem stanju - Zvočno zaščitni pokrov - Brez ločilne lopute

Stanje: rabljeno, Leto izdelave: 2005, Charge weight 620 liters External tank diameter 1,700 mm Tank diameter / tank height 1,550 / 600 mm Working basin width 450 mm Kjdpfxswcg D Uj Al Nelr Motor power 4.5 / 7.5 kW Motor speeds: 900 / 1,485 rpm Operating voltage 400 V Total power requirement 8.5 kW Machine weight approx. 1.6 t Space requirements approx. 2.00 x 1.70 x 1.50 m Acoustic hood mounting 3.30 x 0.60 x 0.40 m Vibratory finishing machine - Factory No.: 36225 / 05 - Machine ON: 6,469 h - Pneumatic separation flap - Timer - Pneumatic acoustic hood

Stanje: rabljeno, Leto izdelave: 1996, Charge weight 135 liters Outer tank diameter 1220 mm Tank diameter / Tank height 1,220 / 1,035 mm Working basin width 304 mm Motor power 0.75 kW Motor speed: 1500 rpm Kedpfx Ajwcg Erjl Nslr Operating voltage 400 V Machine weight approx. 600 kg Space requirement approx. 1.38 x 1.28 x 1.04 m Vibratory finishing machine - Factory No.: 15772 / 96-08 - Machine ON time: 44,854 h - with drum heating

Stanje: rabljeno, Leto izdelave: 1998, Polnilna prostornina 620 litrov Zunanji premer posode 1695 mm Dolžina posode (raztegnjena) 3800 mm Širina delovne kadi 430 mm Število vrtljajev 900 - 1485 obr/min Obratovalna napetost 400 V Skupna priključna moč 7,5 kW Teža stroja pribl. 1600 kg Potreben prostor pribl. 1,80 x 1,70 x 1,30 m Kedpfx Aew Hnr Iel Nslr - Tovarniška št.: 18585/98-03 - z brezstopenjsko nastavitvijo vrtljajev (frekvenčni pretvornik) - s pnevmatsko ločevalno loputo

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Certificirano po DGUV do: 04/2027, vrsta vhodnega toka: trifazni, Doja Tec model: BK2-VA z regulatorjem hitrosti izvedba iz nerjavečega jekla za prekrivanje izdelkov Ksdpfxsyy Sk Is Al Njlr priključek 400 V, 16 A CEE vtičnica + stisnjen zrak Mere: 3000 x 970 x 1380 mm (ŠxGxV) rabljen stroj Možnost: Dostava do pekarne