Ohišje Zračnega Filtra nakup rabljenega (746)

Stanje: novo, številka stroja/vozila: d24246f092ae53c0e155d19dd, lastna masa: 2.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 16.000 kg, Further information Chassis: Tandem trailer Steel welded construction with approximately 152 mm high floor assembly, load-oriented and torsion-resistant steel frame design. Longitudinal floor frame with a load-resistant outer frame and guiding tunnel spaced at 600 mm intervals, tunnel with top and side alignment guides, tunnel height approx. 45 mm. Four container corner castings suitable for 20ft interchange units. 4 Jumbo support legs for parking height of 970 mm, laterally extendable and can be folded by 90°, with short safety struts and locking device, frame-mounted pin lock and robust drop latch as secondary transit locking system, symmetrical arrangement of the support legs—Type A2 for CWB C 745/782 for parking height approx. 970 mm. Reinforcement between support feet. 7 pairs of recessed lashing rings in the outer frame, each rated for 2.5 tonnes. Heavy-duty pallet stops on both sides, approx. 20-25 mm high, lash points every 200 mm, loading height reduced by approx. 20-25 mm. Side door retainers. Rear underrun protection made from flat steel. Floor Anti-slip phenolic plywood, approx. 27 or 30 mm thick (at manufacturer's discretion), designed for high point loads, suitable for forklift axle loads up to max. 4400 kg. Front wall/corner stanchions Front stanchions 2,800 mm high, remainder closed with tarpaulin, steel corner stanchions in volume design, quick-release system for side curtain at front wall. Centre posts Lsdpskt Ni Usfx Al Ijab 1 pair of sliding posts, fully adjustable lengthwise, with four latching pockets and an extended pocket at the bottom. Insert slats Three rows of aluminium V-insert slats or wooden slats as per manufacturer’s choice, One extra row of aluminium V-insert slats. Rear wall/rear corner stanchions Rear corner stanchions, steel up to the underside of the roof, tarpaulin hangers with round tube and tension ratchet. Rear portal doors, double-leaf, each door with two internal locking rods. Tarpaulin Tarpaulin with welded horizontal and vertical tension belts. Tension locks made from stainless steel. Roof Sliding curtain roof, rear end-lift foldable, roof can slide from rear to front, L-shaped roof beam suitable for the automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin colour: white. EcoLift - lifting roof, can be raised by approx. 380 mm, gas strut assisted. Approval / Plaques Country of registration: Germany Manufacturer certificate to EN 12642 XL Paintwork Frame: hot-dip galvanized Front corner stanchions: hot-dip galvanized Front wall: aluminium Rear corner stanchions: hot-dip galvanized Rear wall: white Tarpaulin: RAL 9005 deep black with advertising lettering Note: Images are archive photos.

Stanje: novo, številka stroja/vozila: e8628b18bda6db44719c946e0, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis Swap Drawbar Trailer Fine-grained steel welded construction Fliegl V-Stream frame Front stop, lengthwise adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holders Side underrun protection, aluminium Side underrun protection offset inwards for optimum clearance to swap body supports Rear underrun protection, steel Rear underrun protection shortened for optimum clearance to swap body supports, lighting system mounted for protection Half-shell mudguards Drawbar configuration for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system, colour-coded lines for easy service Air reservoir 208 litres Lajdpfxei Rivle Al Ieb Spring-actuated parking brake 2 mix-up-proof coupling heads at front, with connection lines to motor vehicle EBS, Electronic Braking System with EBS socket at front, including connection cable Note: The trailer may only be towed by tractors that ensure the functionality of ABS! With raising & lowering valve, hold function in both raised and lowered positions Wheels and Tyres 385/65 R22.5, brand as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights front 2 white/red marker lights rear 2 x 7-pin mix-up-proof plugs at front, with connection cable 2 additional LED work lights at rear, controlled via reverse light 1 LED work light centrally at the front between the crossmembers, rear-facing, controlled via reverse light Country of Registration / Plates Germany with Dekra inspection and certificate (per §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective strips according to ECE R 048, white at sides and red at rear Paintwork Frame DB 7350 Novagrau. 10-year warranty against rust-through Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: d7a33d709a92cd60f18d010e8, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/65 r22.5, Further Information Chassis Swap Central Axle Trailer Fine-grained structural steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20’ base for swap bodies 7.15 and 7.45 1 pair of gearbox support feet at the front, with straight bottom part and single-side operation on FR right 2 wheel chocks with holders Side underrun protection made of aluminium Side underrun protection set inwards, for optimal clearance to the swap body supports Rear underrun protection made of steel Half-shell mudguards Mud flaps Central axle trailer drawbar system Drawbar with tested 50 mm towing eye, freight forwarding specification (not suitable for trucks with tail lift; exact review required in case of order) Axles + Suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension Brake System Ljdpfxei Riwbs Al Ijab 2-line compressed air brake system; colour-coded line routing for easy servicing Air reservoir 208 litres Spring-loaded parking brake 2 foolproof coupling heads at the front, with connection lines to towing vehicle, connection on FR right EBS, Electronic Braking System with EBS socket at the front, with connecting cable, connection on FR right Attention: The trailer must only be towed by vehicles which ensure the function of the ABS! With lift & lower valve, hold function in both lift / lower position Wheels and Tires 385/65 R22.5 make Athos Steel rims, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane indicator lights at the rear 1 x 15-pin plug at the front, with connection cable, connection on FR right 2 additional LED work lights, integrated in the rear, switched via the reversing light 1 LED work light at the front centered between the supports, shining to the rear, switched via the reversing light Operating Notes The specified gross weight is technically possible; depending on the type of load the gross weight may not be achievable within the admissible axle, tongue and king pin loads. (Poor driving or trailing behavior possible due to improper load distribution) Country of Registration / License Plates Germany With Dekra inspection and appraisal (according to §13 EC - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective tape per ECE R 048, white on sides and red on rear Paintwork Frame DB 7350 Nova Grey, 10-year corrosion warranty Note: Archive images!

Stanje: novo, številka stroja/vozila: 087c7b6bc0c6118a84279fb46, lastna masa: 4.100 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, loading area tapered downward after the rear axle by approx. 8°. Longitudinal beams made from steel sections. Steel frame, hot-dip galvanized, with stainless steel sheet at the bend for cable guidance, flush with the platform floor. Suitable for trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm. Tow Coupling Tow coupling, ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, including installation and electrics with 7-pin socket. Accessories/Conversions 2 brackets for wheel chocks, folding side underrun protection in aluminum – adopted from the truck! Rear under-run protection in steel, quarter shell fenders with mudflaps – adopted from the truck! Toolbox Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with padlock (lock not included). 1 holder for 3 fuel canisters. 1 stainless steel toolbox, w=600 / h=400 / d=500 mm, with polished door, lockable, includes control valve and electrohydraulic power unit. Controller box with peripheral door seal and sealing grommets at the rear (splash-proof as technically possible). Electrics Adaptation of existing taillights, 2 additional recessed LED work lights in the bulkhead, switched via parking light with switch outside on front wall, left side. 1 LED work light at the rear, with integrated reversing camera, including color flat screen monitor, monitor with suction cup mount and power supply via 24 Volt, voltage divider 24/12V, 1 x 7-pin 12V socket = plug adapter. Flooring Mega Grip made from serrated galvanized grating, steel floor gratings 50/4 including mesh size 50 mm. Top with anti-slip serrations, laid continuously over main frame platform. Lashing Points 12 pairs of swivel-mounted lashing rings in the outer frame – each 10 tons, first ring at the very front, last at the very rear. 1 lashing ring centrally at the rear for fastening winch cable. 12 lashing rings recessed in the floor, each 5 tons (not in rear bevel). Bulkhead Bulkhead made from sheet steel, height 1,500 mm. Fixed with corner posts at bulkhead height. Each with 2 x 12 hanging brackets for lashing chains mounted left and right on the bulkhead. Winch Electric cable winch, 24 Volt, pulling capacity approx. 6,350 kg, mounted centrally at the bulkhead (recessed with loading bridge), operated by radio remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, cable pressure plate, incl. overload protection, winch freewheel clutch, handheld control with approx. 5 m cable, winch acceptance certificate, civil engineer test report, logbook, and operating instructions. Ramps Ledpfji Riytjx Al Isab Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg/pair (also for ramp loading), electrohydraulically foldable and laterally adjustable – incl. electrohydraulic power unit. Approach angle approx. 8° with lowered rear axle. Ramp platform made of galvanized steel grating (as platform floor), with anti-slip serrations. Ramps can be pushed together to approx. 170 mm, ramp extension hydraulically. Ramps preconfigured for use at loading docks with full load capacity. Ramp locking with 2 lashing straps. Ramp tip stepped (nose min. 150 mm) for use at loading docks. Operating instructions included. Ramps lowering valve for ramp lowering. Support Adjustable support legs at rear, foldable and length-adjustable

Stanje: novo, številka stroja/vozila: 81b04fd2e28f354df79a4c3b3, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5``, Further information Chassis: Central axle swap trailer Fine-grain steel welded construction Front stop, adjustable lengthwise and foldable 2 pairs of removable guide rollers, front and rear Locking-folding adapter + height adjustment for support height 1,000–1,120 mm, folding centre supports and guidance rollers repositionable upwards 4 container locks with robust outriggers on 20' base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support legs at the front, with straight base and single-side operation, positioned front right 2 wheel chocks with holder Side underrun protection: Aluminium Rear underrun protection: Steel Half-shell mudguards Drawbar arrangement: Central axle trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift; detailed verification required upon ordering) Lajdpfx Aloi Riy Ns Ieb Undermount coupler drawbar, free drawbar length approx. 2,200 mm Axles + suspension: SAF drum brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system: 2-line compressed air braking system, colour-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle, connection front right EBS: Electronic Braking System with EBS socket at the front, with connecting cable, connection front right Warning: The trailer may only be towed by towing vehicles that ensure ABS functionality! With lifting & lowering valve, holding function in both lower and raised positions Vehicle stability control system Wheels and tyres: 235/75 R17.5'', brand at manufacturer’s discretion Steel twin wheels, factory silver Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED marker lights 2 white position lights at front 2 white/red lane-keeping lights at rear 1 x 15-pin socket at the front, with connecting cable, connection front right 2 additional LED work lamps at the rear, controlled via reverse light 1 LED work lamp centrally at the front between the crossmembers, rear-facing, controlled via reverse light Operating instructions: The indicated gross weight is technically possible, yet depending on the cargo, the gross weight may not be reached when observing permitted axle, support, and kingpin loads. (Poor driving and trailing characteristics may result from improper weight distribution) Country of registration / Plates: Germany With Dekra inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row licence plate holder Warning plate as per ECE-70 Contour marking with reflective tapes according to ECE R 048—side white, rear red Paintwork: Frame DB 7350 Novagrau 10-year warranty against rust-through Note: Archive images!

Stanje: novo, številka stroja/vozila: ccd5fddabaca94f260d9fe895, lastna masa: 2.950 kg, največja dovoljena obremenitev: 15.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 445/45 r19,5, Further Information Chassis Swap Trailer with Turntable Fine-grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust outriggers based on 20-foot standard for swap bodies 7.15 m and 7.45 m Turntable with heavy-duty slewing ring 2 wheel chocks with holders Side underrun protection in aluminum Side underrun protection set inward for optimal clearance to swap body supports Rear underrun protection in steel Rear underrun protection shortened for optimal clearance to swap body supports, lighting installation is protected Quarter mudguards at the front and half mudguards at the rear Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy maintenance Air reservoir 208 liters Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to the truck tractor EBS, Electronic Braking System with EBS connector at front, with connection cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS operation! With raise & lower valve, hold function in both raise/lower positions Wheels and Tires 445/45 R19.5 tires, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, with connection cable 2 additional LED work lights at the rear, switched via reversing light 1 LED work light at the front center between the beams, rear-facing, switched via reversing light Country of Registration / Plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) Laodpfx Alsi Ri Rks Ieb 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Please note: Archive images!

Stanje: novo, številka stroja/vozila: c78894767223a51dd199030f3, lastna masa: 4.600 kg, Further Information Frame Steel welded construction made from fine-grain steel, hot-dip galvanized, flat platform without raised edges. The loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made from steel profiles, steel frame hot-dip galvanized, with stainless steel plate (NIRO) at the bend to guide the cable, flush with the floor. For trucks with wheelbase: 2nd axle at 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm. Trailer Coupling Ball-type tow hitch D24.8: (height from the ground to the top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrics with 7-pin socket. Accessories/Modifications 2 chock holders, foldable aluminum side underrun protection – taken from the truck! Laodok Unitjpfx Al Ieb Steel rear underrun protection, quarter-shell mudguards with mud flaps – taken from the truck! Toolbox Plastic toolbox with drawer and shelf, W = 650 / H = 520 / D = 670 mm, lockable with a padlock (lock not included). 1 bracket for 3 jerry cans. 1 stainless steel toolbox, W = 600 / H = 400 / D = 500 mm, with polished door, lockable, includes control valve and electrohydraulic pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash water protection as far as technically possible). Electrics Adaptation of existing tail lights, 2 additional LED work lights recessed into the front wall, switched via parking lights with switch on the outside front wall left. 1 LED work light at the rear with integrated reversing camera including color flat-screen monitor with suction cup mount and power supply via 24 volts, voltage divider 24/12V, 1 seven-pin 12V socket adapter. Floor Mega Grip made from serrated, galvanized grating, steel gratings 50/4 included, with 50 mm mesh. Top side with anti-slip serration, laid continuously over the entire main platform area. Lashing Rings 12 pairs of lashing rings freely pivotable on the outer frame - each rated to 10 t. 1 at the very front and one at the very rear. 1 lashing ring at the rear center for attaching the winch cable. 12 lashing rings recessed centrally into the floor, each rated to 5 t. (not included in rear slope). Front Wall Front wall made from steel sheet, height 1,500 mm. Fixed with corner posts up to full front wall height. 2 x 12 hanging brackets for lashing chains mounted left and right on the front wall. Winch Electric cable winch, 24 volts, pulling force approx. 6,350 kg, mounted centrally at the front wall (recessed in the loading bridge), operated via remote control, cable length min. 35 m x 9.5 mm, with roller fairlead, with cable pressure plate, including overload protection, cable freewheeling clutch, hand control with approx. 5 m cable, winch acceptance, civil engineer test report, test log, operating instructions. Loading Ramps Length 3,500 mm – 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg per pair (also for ramp loading), electrohydraulically tiltable and laterally movable – including electrohydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle. Ramp support surface made from galvanized steel grating (like the loading bridge floor), with anti-slip serration. Ramps can be compacted to approx. 170 mm, hydraulically extendable. Ramp prepared for operation at loading dock with full load capacity. Ramp locking with 2 tension belts. Ramp tip offset (nose min. 150 mm) suitable for placement at loading ramps. Ramp operation labeled. Drop brake valve for l

Stanje: novo, two buttons and emergency stop switch Length 129 mm Lsdjtr Ei Repfx Al Ioab Width 70 mm Height 65 mm total height 92 mm unused, from stock clearance several available

Stanje: novo, številka stroja/vozila: 003, lastna masa: 2.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, vzmetenje: zrak, Leto izdelave: 2026, Oprema: ABS, Kögel Combi swap body trailer; - New vehicle – turntable steering - Gross weight 18,000 kg - For container standing height 1220–1320 mm - Ride height unladen 1255 mm - 40 mm towing eye Lodpfeg Dkwrox Al Isab - BPW axles 2x9 t, disc brakes, ET 120 (partially also available with SAF axles) - Lifting and lowering function - Tyre size 385/ as per manufacturer’s choice - Optionally available with 385/55 tyres - ABS-EBS - Warning signs ECE-R70, 2 pieces - Kögel KTL Nano Ceramic corrosion protection system Prices are net, plus 19% VAT, ex stock. Offer is subject to change; errors, prior sale and modifications reserved. Leasing/financing/hire purchase possible, subject to credit approval. Leasing from €273.00 per month plus 19% VAT. We are available at any time for further inquiries. Pictures are for demonstration purposes and may show optional extras subject to surcharge.

Stanje: novo, številka stroja/vozila: 002, skupna masa: 18.000 kg, velikost pnevmatike: 445/45r19.5, barva: črn, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, Krone swap body trailer type AZW 18 eL3B7; - New vehicle - turntable steered - Gross weight 18,000 kg - For container support height 1,020–1,320 mm - Ride height unladen 1,080 mm - 40 mm towing eye - BPW axles 2x9 t, disc brakes, ET 120 - Lift and lower function - Tyre size 445 (manufacturer selectable) - Optionally available with 435 tyres - Spare wheel carrier - ABS/EBS - KTL primed and powder-coated - Deep black Prices are exclusive of 19% VAT ex location. Offer is non-binding; errors, modifications, and prior sale reserved. Leasing, financing, and hire purchase available, subject to credit check. Leasing from €294.00/month plus 19% VAT. We are available for any questions you may have. Images are for demonstration purposes and may show optional extras at additional cost. Laedpfx Aljg Dkwvo Ieb

Stanje: novo, številka stroja/vozila: 001, lastna masa: 2.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, vzmetenje: zrak, velikost pnevmatike: 385/65r22.5, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, Krone swap-body trailer type AZW 18 eL3B9; - New vehicle - turntable steered - Gross weight: 18,000 kg - Suitable for container support height 1220-1320 mm - Unladen ride height: 1255 mm - 40 mm towing eye Ljdjg Dkwyopfx Al Isab - BPW axles, 2 x 9 t, disc brakes, track width 120 (partially also with Krone axles) - Raise and lower function - Tire size: 385, Krone Easy Rider - Optionally available with 385/55 tires - Spare wheel holder - ABS/EBS - ECE-R70 warning plates, 2 pieces - KTL primed and powder-coated, deep black Prices are excluding 19% VAT ex works. Offer is subject to change, errors, alterations and prior sale reserved. Leasing/financing/hire purchase possible subject to credit approval. Leasing from €259.00 per month plus 19% VAT. We are available for any questions. Images are for demonstration purposes and may show optional extras at extra charge.

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, vzmetenje: zrak, velikost pnevmatike: 385/55r22.5, Leto izdelave: 2026, Oprema: ABS, Krone Swap Body Trailer Type ZZW 18 eLE10; - New vehicle - tandem - GVW 18,000 kg - Suitable for parking heights from 1,070 to 1,320 mm - Ride height unladen: 1,090 mm - 50 mm towing eye, extendable 4x100 mm - BPW axles 2x9 t, disc brakes, offset 120 (partially also available with SAF axles) - Raising and lowering function - Tire size 385 / Krone Easy Rider - Optionally also with 435 or 445 tires - Spare wheel carrier - ABS-EBS - 2 x warning panels ECE-R70 - KTL primed and powder-coated, deep black finish Prices are subject to 19% VAT, ex works. Offer is non-binding; errors, changes, and prior sale reserved. Leasing/financing/hire purchase possible, subject to credit approval. Laodpfeg Dkwnjx Al Iob Leasing from €344.00/month plus 19% VAT. For questions, we are always at your disposal. Images are for demo purposes and may show optional equipment subject to surcharge.

Stanje: rabljeno, Probe head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50 Laedpfx Aljrnagpj Ieb Probe for coordinate measuring machine Serial: 77501 - A Probe holder: TP20 probe body for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe mounting: M8 thread Head mounting with MS shank Ø 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180° socket - 5 thread connections M8 for probes (4 blind plugs included) Total weight: 280g Used, in good condition

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Laodpfxsxcbl De Al Ijb Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Teža: 3,8 kg zelo dobro stanje

Leto izdelave: 2018, stanje: dober (rabljeno), We are selling a Klepp gas filtration unit compliant with ATEX "e" II 3 G. This is the solution for continuous, optimal extraction and filtration of gaseous pollutants. Ledem Ak Rmepfx Al Ieab

Stanje: rabljeno, Outlet NW 50 top, pressure gauge with outlet. Optional: various fittings. Laedpfxjxytwmo Al Ieb Quantity available (offer per piece): 11

Stanje: rabljeno, brez vtiča Ljdpsxzi Hyjfx Al Isab

Stanje: rabljeno, Duct sensor for relative humidity/temperature 2 x 0...10 V -Type: QFM2160 For duct installation with mounting flange. Lodsb H Ebfepfx Al Isab -Technical data: -Temperature sensing element: active -Humidity sensing element: capacitive humidity sensor -Operating voltage: 24 VAC, 13.5...35 VDC -Power consumption:

Stanje: rabljeno, Wire feed unit for MIG/MAG welding machine, shielding gas unit, wire feed case - Manufacturer: Ess wire feed unit, water-cooled - Model: DVK 300-3 Ljdjf D A Abepfx Al Ioab - Accessories: hose package - Dimensions: 750 x 410 x H430 mm - Weight: 32 kg

Stanje: rabljeno, Duct sensor for relative humidity/temperature, 2 x 0...10 V -Type: QFM3160 For duct installation with mounting flange. Lodpfx Ajb H Ebgjl Ieab -Technical specifications: -Temperature measuring element: active -Humidity measuring element: capacitive humidity sensor -Operating voltage: 24 VAC, 13.5...35 VDC -Power consumption:

Stanje: dober (rabljeno), Wire feed unit for MIG/MAG welding machine, shielding gas unit, wire feed case, wire feeder Lsdpfxjvw Rade Al Ieab -Manufacturer: Oerlikon wire feed case, gas-cooled -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Stanje: dober (rabljeno), DF separator, oil mist separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, generator air filter Ljdpfx Aowbzxqjl Isab - Manufacturer: Mann Filter, air oil separator filter type 49 002 - Inner/outer diameter: Ø 124/169 mm - Quantity: 5 air filters available - Price: per piece - Dimensions: Ø 190 x 315 mm - Weight: 2.6 kg each

Stanje: dober (rabljeno), Plummer Block Housings, Plummer Block Housing, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, Pillow Block SKF, Plummer Block Housing Unit Ledpfxjv Ulaaj Al Ijab - Manufacturer: FAG, Plummer Block Housing Type TVN 312 - Bore Diameter: 70 mm - Quantity: 4x housing units available - Price: per piece - Dimensions: 295/120/H163 mm - Weight: 10.8 kg/piece

Stanje: dober (rabljeno), Plummer Block Housing, Plummer Block Housings, Plummer Block Bearing Unit, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Bearing, Plummer Block Unit - Manufacturer: SKF, Plummer Block Housing Type SN 212 - Bore diameter: 72 mm Ledpfx Alsv Ulf Nj Ioab - Quantity: 1x housing available - Dimensions: 255/105/H135 mm - Weight: 4.2 kg

Stanje: rabljeno, Refrigeration compressor, chiller, cooling compressor, condensing unit, refrigeration condensing unit, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, angle flange, valve flange - Manufacturer: Alco, Thermo valve body unused in original packaging - Type: C 501-7 mm/PCN 803235 - Price: per unit - Quantity: 10 units - Package dimensions: 105/80/H70 mm Laedpjfyfxqjfx Al Iob - Weight: 0.3 kg/unit