Filter zračnega ločevalnika olja

Mann Filter 49 002

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor RLA 160 For wood dust and chips, designed for commercial use Article number: 5131620 Brand: Holzkraft Suitable for wood chips and wood dust. Designed for commercial use. Podecnw T Ispfx Afaepu All clean air extraction units in this series are H3 dust-tested, with residue dust content less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet Areas of application Clean air extraction units for wood chips and wood dust Designed for commercial applications Suitable for all woodworking machines with the corresponding extraction port diameter Can be used for multiple dust sources High-quality and well-engineered construction Durable and compact housing made of galvanized sheet steel Extraction ports easily convertible from left to right, allowing flexible use Large inspection openings Large-capacity mobile chip containers with clamping bracket and collection bag Unit is delivered fully assembled for immediate use Mobile Filter Description Ultra-compact design with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and thus long-lasting Filter comes in antistatic design as standard, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp on the control panel The fan is installed after the filter (downstream) Features: Equipped with a new type of locking mechanism for secure container positioning All units in this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE 5-pin plug and phase inverter 2 fixed and 2 swivel castors with locking brake Manual filter cleaning Model RLA 160 Item number 5131620 Technical data Extraction port diameter 160 mm Nominal air flow 1448 m³/h Max. air flow 2400 m³/h Negative pressure at nominal flow 2247 Pa Filter surface area 9.21 m² Filter material Dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning — Compressed air supply — Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (L x W x H) 1681 x 830 x 1654 mm Weight 254 kg Location: Available from stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of suction connection (inlet): 200 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Max. sound pressure level: 72 dB(A) Air Volume Nominal air flow: 2262 m³/h Dust tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirement Maximum performance in this class Very quiet All models equipped with collision protector Applications Designed for commercial use Suitable for all woodworking machines with corresponding suction connection diameters High-Quality, Thoughtful Construction -Robust and compact housing made of galvanized steel sheet -Suction connection can be easily converted from left to right for flexible use -Large access openings for maintenance -Large, mobile chip containers with clamping bracket and chip collection bag -Dust extractor comes fully assembled for immediate operation -All models are mobile -RLA 210 model: Optimal chip distribution in the containers thanks to a large filter area Filter Description -Ultra-compact with maximum filter area -Filter material made of polyester fleece, aluminum-coated, washable and therefore highly durable Ppjdpfx Ajhk Dfrofaeu -Filter standard antistatic, certified and approved according to category M-BIA -Filter resistance monitoring via differential pressure switch, adjustable with warning lamp on control panel -Fan mounted downstream of filter Equipment Details With innovative locking device for secure container positioning Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 590 m², volumenski pretok: 70.000 m³/h, skupna širina: 2.450 mm, skupna dolžina: 9.600 mm, skupna višina: 8.500 mm, priključek za stisnjen zrak: 6 letvica, Oprema: dokumentacija / priročnik, Samodejno čistilni vrečasti filter Pretok zraka: 70.000 m³/h Dimenzije: približno 9600 x 2400 x V 8000 mm Število con za usedanje prahu: 2 Skupna površina filtrirne tkanine: 590 m² Filtrirna tkanina, antistatična Pjdpfxexfb Nns Afaspu Čiščenje filtrirne tkanine z zračnim tokom v protitoku, regulacija z upravljalno enoto – sekvencimeter Polž, rotacijski ventil za izpust filtriranega prahu Električna upravljalna omarica Sesalni elektroventilatorji, moč se določi z uporabnikom Izpušni elektroventilator za izpust filtriranega materiala v zbiralni sistem

Stanje: novo, Leto izdelave: 2026, CORMAK DCV Series Dust Extractors are designed for filtering primarily very fine dust particles. Engineered to deliver effortless automatic filter cleaning cycles, these units feature a motor-driven shaking system that allows the entire filter cleaning process to occur automatically within a closed circuit. Key Features of DCV Dust Extractors: - Robust, heavy-duty construction ensures quiet and vibration-free operation of the dust collector - High system tightness guarantees optimal air quality inside the facility and, during the heating season, eliminates heat loss - Powerful and quiet radial fan delivers high vacuum performance - Option to build a ceiling-mounted system, enabling connection to several machines operating simultaneously with the DCV extractors - Reliable, maintenance-free automatic filter shaking system - Mobile chassis for convenient relocation throughout the facility - Waste containers designed to maintain 99.99% airtightness of the system, equipped with a mobile handling system - Control cabinet with precise monitoring of filter contamination status and device on/off functions - Polyester filter captures particles down to 5 microns; for smaller particles, such as under 5 microns, a HEPA filter is recommended Psdpfxsuc Unqo Afaepu - The extractor must not be used in explosive atmospheres - Suitable for use in the woodworking industry for sawdust, shavings, and dust (not suitable for wet materials such as wet sawdust) - Before starting the extractor, remove the lower beam to allow quick access to the chip containers Technical Specifications: CONTINUOUS DUTY MOTOR POWER (S1): 3.0 kW ROTATIONAL SPEED: 3000 rpm EXTRACTION CAPACITY: 4500 m3/h INLET DIAMETER: 200 mm SUCTION VELOCITY: 28-32 m/s FILTER AREA: 6 m2 FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 18 DIMENSIONS: 752 x 1502 x 2200 mm WEIGHT: 200 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, The CORMAK DC2200 is an efficient and robust cyclone dust extractor, designed for effective air filtration in carpentry workshops, furniture manufacturing plants, and metalworking facilities. With its cyclone separator, powerful centrifugal fan, and advanced filtration system, the unit ensures efficient dust fraction separation and sustained high performance over time. Main advantages of the CORMAK DC2200: - High extraction capacity – up to 2800 m³/h – effective removal of dust and chips from multiple workplaces simultaneously - Cyclone separator – pre-separates larger particles before the filter, extending filter lifespan - Powerful 2.2 kW motor (2200 W / 50 Hz) – stable and reliable continuous operation - Large 151-litre metal collection bin – convenient and safe waste storage - Filter area of 4.8 m² – ensures excellent fine dust capture efficiency - Compact, mobile design – sturdy frame with castors for easy transportation - Quiet operation – optimized fan design reduces noise levels without compromising efficiency Construction and technology: The CORMAK DC2200 features a 365 mm diameter centrifugal fan, delivering up to 2220 Pa of maximum static pressure. This enables the machine to efficiently draw air from long ducts and multiple workstations. Three suction ports (3 × Ø100 mm) and one main inlet (Ø200 mm) allow flexible adaptation to the requirements of any workshop layout. The cyclone system efficiently separates heavier particles at the inlet, allowing only filtered air into the bin. The cylindrical filter (Ø370 × 612 mm) maintains steady airflow even during intense usage. Performance and ergonomics: The DC2200 is designed for daily use in small and medium-sized facilities. The 151-litre bin (Ø620 × 570 mm) guarantees long work cycles without frequent emptying. Its compact dimensions (1320 × 900 × 1840 mm) and manageable weight (136 kg net) make it easy to integrate into any workspace. Applications: The CORMAK DC2200 is ideal for use in: - Carpentry and furniture workshops - Sawmills and woodworking centres - Model making and metalworking shops - Production of composite and MDF components Ppodpfx Afexrdhaeasu Standard equipment: - Cyclone separator - Large-surface cylindrical filter - Metal collection bin for dust and chips (151 L) - Transport wheels - Suction inlets Ø200 mm and 3 × Ø100 mm Technical specifications: Motor power: 2.2 kW / 50 Hz Airflow (without filter): 3900 m³/h Max. static pressure: 2220 Pa Fan diameter: 365 mm Inlet diameter: 1 × Ø200 mm / 3 × Ø100 mm Collection bin volume: 151 L Bin dimensions: Ø620 × 570 mm Filter area: 4.8 m² Filter dimensions: Ø370 × 612 mm Overall dimensions (L×W×H): 1320 × 900 × 1840 mm Weight (net/gross): 136 / 170 kg

Stanje: rabljeno, Leto izdelave: 2000, Naziv stroja: Komorni filtrski stiskalnik, rabljeno Proizvajalec: Simex Sauer Tip: SPK 80 Leto izdelave: 2000 Izvedba: Stransko voden stiskalnik Filtracijski tlak: 16 bar Vsebina stiskalnika: Približno 1.000 litrov Odtok: Zaprt Filtracijska površina: Približno 80 m2 Format plošč: 800 × 800 mm Ppodpsxa Dwqjfx Afaou Število plošč: 78 Material plošč: Polipropilen Transport plošč: Ročno Filtrske tkanine: Ne Pralni sistem filtrov: Ne Dolžina paketa plošč: 4.400 mm Debelina filtračne pogače: 25 mm Zapiralni tlak: 350 bar Dimenzije: D 6.400 × Š 1.400 × V 1.500 mm Lastna teža: 6.000 kg Tehnična dokumentacija: Ne Dodatna oprema: Ena komandna omara in hidravlični sistem Stanje: Rabljeno Cena: Na zahtevo

Stanje: zelo dobro (rabljeno), Vrečasti filter ARGUMAT nameščen v asfaltni bazi Leto 2014 Motor 90 kW Demontaža ni vključena Ppodpfx Aoywct Iefaou

Stanje: rabljeno, MAS 3-vrečka odsesovalnik prahu Moč motorja: 3 kW Frekvenca: 50 Hz Pedoy Hq S Ropfx Afaepu Tok: 7 A Napetost: 380 V

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, CORMAK FM230 with dust filter is a compact, mobile professional-class chip extraction unit, designed for efficient removal of chips, dust, and shavings in woodworking workshops. Thanks to the use of a dust filter, the device not only ensures high suction performance but also increased filtration efficiency, which significantly improves air quality in the workplace. Key Advantages - Capacity of 1000 m³/h – ideal for use with medium- and low-power machines. - Dust filter – effective capture of small diameter particles, including fine sanding dust. - 0.75 kW / 230 V motor – quiet, energy-efficient operation with no need for three-phase power. - Mobility – four caster wheels enable easy relocation of the extractor within the facility. - Compact design – the device takes up little space, making it an ideal choice for small workshops. Pjdpfoycuckex Afaspu Construction and Technology The unit is equipped with a metal chip impeller, guaranteeing long service life and reliability. The high-quality dust filter effectively separates dust particles from the airflow, reducing room contamination. The solid, powder-coated housing protects internal mechanisms, and an airtight suction system prevents pressure loss. Precision and Working Efficiency The CORMAK FM230 woodworking extractor ensures stable and consistent suction. Its capacity of 1000 m³/h with a low-power motor allows for efficient operation of a single woodworking machine without interruption. Thanks to its fine particle filter, it is also an excellent extractor for dust generated during wood sanding. Applications - Small and medium woodworking shops - Craft and production workshops - Technical schools and educational workshops - Hobby woodworking studios The FM230 works perfectly with: milling machines, planers, jointers, belt sanders, and thicknessers. Standard Equipment - Dust filter - Waste collection bag - Caster wheels with brakes - Clamp band for bag fixing Optional Equipment - Ø100 mm extraction hose - Extraction port reducers - Additional set of filter bags Technical Specifications Motor power: 0.75 kW Extraction capacity [m³/h]: 1000 Vacuum: 1800 Pa Noise level: 70 dB Bag volume: 60 l Number of bags: 2 (filter + waste) Extraction port diameter: 100 mm Dimensions (H x W x L): 1500 × 420 × 600 mm Power supply: 230 V Weight: 27 kg

Stanje: zelo dobro (rabljeno), Hidravlični filter -Tip: RG 045/070/RE045G20B -Količina: na voljo 3 kosi -Cena: na kos -Teža: 0,5 kg/kos Podpfx Afsb A Skusaspu