Mul 1/6 nakup rabljenega (98.527)

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds Lhodpfx Aheuxfu Njuoh - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: dober (rabljeno), Leto izdelave: 1998, Auxiliary lifting device Brand: Single Type: STW 1-6-25-ZN Year approx. 1998 Ledpfxjfcy Drs Ahuehh

Stanje: zelo dobro (rabljeno), Manual control unit for Mitutoyo machines with CMMC 1, 1S, 2, 2S, 3, 3S, 6 and UC200/400 Ledpfx Ahogynw Dsushh

Leto izdelave: 2024, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, DESTACO Pnevmatski silovni valj WK3000-30-6-1. Št. artikla: 0576762. Sila bata pri 6 bar: 3000N. Največja vpenjalna sila: 30.000N. Več informacij na slikah. Leta 2024 kupljen samo za testiranje. Ogled je možen. Prodaja brez garancije in vračila. Lodpfxjvb Di Ts Ahuohh

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 3.800 km, moč: 140 kW (190,35 KM), prva registracija: 08/2024, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 3.670 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 70 l, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, število prestav: 8, emisijski razred: Euro 6, skupna dolžina: 6.980 mm, skupna širina: 2.020 mm, skupna višina: 2.350 mm, dovoljena osna obremenitev (os 1): 2.000 kg, dovoljena osna obremenitev (os 2): 2.300 kg, Leto izdelave: 2024, Oprema: AdBlue, Splošne informacije Število vrat: 2 Kabina: enojna Uporaba: kmetijstvo, gradbeništvo, drenaža, zemeljska dela, gozdarstvo, sadjarstvo, vrtnarstvo, živinoreja in gradnja cest Registrska oznaka: V-18-GLV Tehnične informacije Število valjev: 4 Prostornina motorja: 1.950 cc Največja dovoljena obremenitev sprednje osi: 2.000 kg Največja dovoljena obremenitev zadnje osi: 2.300 kg Teža Lastna teža: 2.256 kg Nosilnost: 1.244 kg Dovoljena skupna masa: 3.500 kg Funkcionalno Nakladalna ploščad: Dhollandia, zadnja dvižna vrata, 1.000 kg Znamka nadgradnje: Mercedes-Benz Vzdrževanje, zgodovina in stanje Tehnični pregled: veljaven do 08.2027 Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije DDV/obračun marže: odbitni DDV Lhodpfsynznkox Ahush Dodatne informacije Za več informacij se obrnite na Jelmer Broekhuizen, Mike Kornet ali John De Frankrijker.

Stanje: zelo dobro (rabljeno), Features: - Brand: Graco / Ref: 24e837 Ledpfx Ahoqfdyaouehh - Fully reconditioned second-hand equipment - Suitable for general industry - 1-year warranty - VAT not included - 2 units in stock

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Znamka: BWF, tip: SI 6/1 AS-N X710, serijska št.: 1114, krmiljenje, znamka Siemens, tip 840 Dsl, obdelava Ø 40-400 mm, globina obdelave 710 mm, obdelovanec Ø 500-600 mm, največja dolžina obdelovanca 1.000 mm, glava WSTK z nastavljivim naklonom -5/+30, tračni filtrirni sistem, filter za oljno meglo, znamka Unifil, nadgradnja 2011. Lhjdpfsyfii Dsx Ahush

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 250 mm, premer osi rezila: 76 mm, ALCA Mida 250 TRE for sale – a professional roll-to-roll label finishing system designed to perform multiple processes in a single, compact and robust line. Ideal for high-end, value-added finishing of pressure-sensitive labels, it provides die-cutting, slitting, rewinding, hot foil stamping, and UV varnishing in one workflow. The unit is in good, fully operational condition, well maintained, and available for on-site inspection and test runs without obligation. *BONUS: Includes 1,000 cutting dies and a photopolymer plate making machine* -> Key Features: - Roll-to-roll finishing line for self-adhesive labels - Maximum web width: 250 mm - Minimum web width: approximately 50 mm - Maximum unwind diameter: approximately 500 mm Lhodpjy Udf Hefx Ahujh - Maximum rewind diameter: approximately 330 mm - 76 mm (3”) cores - Mechanical speed up to 30–35 m/min (depending on material and finishing) - High-precision die-cutting system - Longitudinal slitting (slitting) with rotary/circular and razor blades - Dual product rewinder - Independent waste (matrix) rewinding - Hot foil stamping unit with accurate pressure and temperature control - Supports metallic foils (gold, silver, various colors) - UV varnishing unit for flood or spot varnish application - Enhances gloss, protection and durability of labels -> Compatible Materials: - Self-adhesive papers - Plastic films (PP, PET, PE) - Standard synthetic substrates - Laminates suitable for hot foil stamping and UV varnishing

Stanje: pripravljen za uporabo (rabljen), Stroj v dobrem delovnem stanju Lhodpfxoy Rnnqj Ahueh

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Lhsdjrkgy Uepfx Ahueh Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.

Stanje: rabljeno, Power cable, solar cable -Solarflex: PV1-F 1 x 6 mm² -1 x 4 mm², 0.6/1 kV -Roll dimensions: Ø 400/310 mm -Weight: 8 kg Lsdpefdvp Eofx Ahuehh

Stanje: dober (rabljeno), Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve manifold, control block Lhodpjb A Sf Esfx Ahueh - Operating pressure: 8 bar / 120 psi - Dimensions: 200/85/H75 mm - Weight: 2 kg

Stanje: dober (rabljeno), Proportional pressure control directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 8 bar / 120 psi -Dimensions: 200/85/H75 mm Lodpfxeb A Sims Ahuohh -Price: per piece -Quantity: 2 available -Weight: 2 kg per piece

Stanje: dober (rabljeno), Proportional pressure control directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve manifold, control block Ljdpfx Aheb A R Hpouohh - Operating pressure: 8 bar / 120 psi - Dimensions: 200/85/H75 mm - Weight: 2 kg

Stanje: dober (rabljeno), Transport hook / Screw lifting clamp / Lifting claws by J.D.T. – 1 ton / 6 ton / 17 ton / 17 ton. Ledpfxeu U H Dne Ahuohh

Leto izdelave: 2026, stanje: novo, „Bosporas Machinery“ yra ritinių apdirbimo linijų, profiliavimo linijų ir presų padavimo sistemų gamintojas, pasauliniu mastu tiekiantis aukštos kokybės ir individualiems poreikiams pritaikytus pramoninius sprendimus. Mūsų kompaktiškos ritinių pjaustymo linijos sukurtos efektyviam ir tiksliam lengvo bei vidutinio storio medžiagų pjaustymui juostelėmis. Šios sistemos siūlo lanksčias komplektacijas – nuo bazinių, kompaktiškų linijų iki pažangių sprendimų su integruotais tiesintuvais. Linijos suprojektuotos siekiant užtikrinti stabilų darbą, nuoseklią pjaustymo kokybę ir optimizuotą gamybos našumą, išlaikant kompaktišką išplanavimą bei ekonomišką investicinį lygį. GALIMI KONFIGŪRACIJŲ VARIANTAI 1 mm | 1300 mm | 4 t | Kompaktiška pjaustymo linija be duobės 3 mm | 600 mm | 6 t | Kompaktiška pjaustymo linija (padavimo spaustuvais) 3 mm | 600 mm | 6 t | Pjaustymo linija su tiesintuvu 3 mm | 1000 mm | 6 t | Kompaktiška pjaustymo linija (padavimo spaustuvais) SISTEMOS KONFIGŪRACIJŲ PASIRINKIMAI Priklausomai nuo gamybos poreikių, linija gali būti komplektuojama su: - Tiesintuvu geresniam medžiagos ištiesinimui bei stabiliam padavimui - Padavimo spaustuvų sistema kompaktiškam ir ekonomiškam darbui - Duobės arba be duobės konstrukcija, atsižvelgiant į išdėstymo reikalavimus TECHNINIAI PARAMETRAI Medžiagos storis: 0,3–3 mm Ritinio plotis: iki 1300 mm Ritinio svoris: 4–6 t Pjaustymo tikslumas: ±0,1 mm PAGRINDINIAI LINIJOS KOMPONENTAI - Hidraulinis išvyniotuvo mazgas (išplečiamas velenas) - Ritinių užkrovimo sistema (pasirinktinai) - Įvyniojimo sistema su spaustuvais arba tiesintuvu - Pjaustymo modulis su preciziškai reguliuojamais peiliais - Atraižų suvyniojimo sistema - Įtempimo ir skaidymo sistema - Vyniotuvas su hidrauliniu velenu - Elektros valdymo ir automatikos sistema (HMI valdymas) INŽINERINIAI YPATUMAI - Aukšto tikslumo pjaustymo našumas - Reguliuojami pjaustymo peiliai su tikslia padėtimi - Tvirtas, pavarų dėže valdomas pjaustymo galvutė - Stabili įtempimo kontrolės sistema - Kompaktiška ir modulinė konstrukcija - Dvipusio darbo galimybė EKSPLOATACINIAI PRIVALUMAI - Lanksti komplektacija skirtingiems biudžetams ir poreikiams Ljdpjyzbm Uofx Ahushh - Kompaktiškas dizainas nedidelėms gamybinėms erdvėms - Stabili ir nenutrūkstama gamyba - Paprastas valdymas ir priežiūra - Trumpesni pristatymo terminai, palyginti su Europos gamintojais PASKIRTIES SRITYS - Plieno aptarnavimo centrai - Lakštinio metalo apdirbimo įmonės - ŠVOK ir statybinių medžiagų gamyba - Automobilių pramonės subrangovai - Bendrosios metalo apdirbimo įmonės

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), VACUUM CALIBRATION TANK LÜERS VT 125-1-6 Lhodpfoiidm Tex Ahueh Chamber: 1 Pipe diameter: max. 125 mm Length: 6 meters Feed: electric, forward and reverse Year of manufacture: 2000 Material: stainless steel (VA)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, HIDRAVLIČNI VENTIL Lhjdpexzqwtefx Ahuoh Vsi naši izdelki so bili pregledani s strani tehničnega oddelka.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna dolžina: 5.500 mm, skupna masa: 6.500 kg, vrsta vhodnega toka: trifazni, moč: 150 kW (203,94 KM), Stetson Ross 6-12-C1 skobelni/frezalni stroj Naprodaj zanesljive lesnoobdelovalne Stetson Ross 6-12-C1 skobelne/frezalne naprave. Močna industrijska konstrukcija, primerna za intenzivno uporabo. Odlično za skobljanje, profiliranje in obdelavo desk, hlodov ter površin v velikih količinah. Stroj deluje brezhibno, tehnično vzdrževan, pripravljen za takojšnjo uporabo. Lsdsxvn Tbjpfx Ahushh Povzetek opreme: Model: Stetson Ross 6-12-C1 Namen: skobljanje/profiliranje lesa Trdna industrijska zasnova Nemoteno delovanje in visoka kakovost obdelave

Stanje: rabljeno, Leto izdelave: 1980, Wickman 1" SN: 17069 Izdelano: 1980 6 vreten Kapaciteta: 1" Motor in krmiljenje Zaloga stojala in koluta Transportni trak za odrezke Univerzalno navojevanje Prevzem in zadnja obdelava Nedavno obnovljeno Lsdezfa U Njpfx Ahuehh

Stanje: rabljeno, Leto izdelave: 1980, Wickman 1" SN: 17069 Letnik izdelave: 1980 6 vreten Zmogljivost 1" Motor in upravljalniki Regal in kolut za zalogo Transportni trak za odrezke Univerzalno navojevje Konfiguriran kot na sliki Nedavno obnovljen Lhodoyzkfyjpfx Ahujh

Stanje: rabljeno, Wickman 1-3/4" 6-vreten Serijska številka: 16814 Elektromagnetna sklopka Magazin za material in stojalo Lhjdeyzkf Hepfx Ahueh Navojno rezanje Transportni trak za ostružke 6 prečnih sani 4. pozicija: Logan univerzalni navojni sistem Očiščen in prebarvan Nedavno odstranjen iz proizvodnje Preverjen pod napajanjem Lahko opremljen glede na vaše zahteve

Stanje: rabljeno, lastna masa: 8.600 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, prostornina tovornega prostora: 60 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Oprema: ABS, Stas FSS Ferrostar 60m³ steel tipper body | ABS / EBS | SAF axles | Disc brakes | Lift axle | Tyres: 385/65 R 22.5 | Front platform | Rear portal doors | Rolling tarpaulin | Lift-lowering system | Suspension: lift / air / air | Sidewalls and floor made of Hardox 450 | LED work lights | Rear underride protection, foldable | Loading dimensions: | Length: approx. 11,000 mm | Width: approx. 2,430 mm | Height: approx. 2,280 mm | Volume: 60 m³ | Unladen weight: Lhjdpfx Ahowwld Aeush

Stanje: rabljeno, Leto izdelave: 1977, Pressure: 160 t Throat depth: 360 mm Stroke: 560 mm Total power requirement: 33 kW Machine weight: approx. 6,000 kg Space requirement: approx. 2000x2400x3650 mm F R I T Z M Ü L L E R Hydraulic Single-Column Drawing Press Model: CEZ 160.5.8 Year of manufacture: 1977 / 2004 Serial no.: 856597 ----- Upper ram pressure capacity: 160 t Return stroke pressure capacity: 16 t Blankholder/drawing cushion capacity: approx. 40 t Ram area: approx. 800 x 600 mm Table size: approx. 900 x 720 mm Table bore: 160 mm Max. installation height: 700 mm Throat depth: 360 mm Table height above floor: 900 mm Ram bore for tool mounting: 50 mm Stroke of the upper ram: approx. 560 mm Stroke of the drawing cushion: approx. 200 mm Total drive: approx. 30/33 kW – 400 V – 50 Hz Weight: approx. 6,000 kg Machine dimensions (LxWxH): 2,000 x 2,400 x 3,650 mm Accessories / Special equipment: Lhodpfx Aet Hw E Ishueh • Table-integrated hydraulic drawing cushion with adjustable cam rail for stroke length • Side-mounted cam rail for ram stroke adjustment, including switch for rapid traverse, working stroke and return • Two-hand control at front of the table, foot pedal, etc. • Built-in filter pump, pressure display via manometer above the cylinder • Integrated shock-absorber, piece counter, etc. • Free-standing control cabinet, completely refurbished in 2004 by the manufacturer, with timer for pressing time and indicator lights • Overhauled/modernised hydraulics with integrated oil cooler Condition: Good – will be powered up and ready for demonstration shortly Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A wide selection of hydraulic presses is always available from our stock, please enquire.

Stanje: rabljeno, največja dovoljena obremenitev: 24.780 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2006, * Schwarmüller HKS 2/E-S1 * 2 osi * 1. os dvižna * FIN: VAVSAK2356H239756 * Lastna masa: 6.220 kg * Nosilnost: 24.780 kg * Skupna masa: 31.000 kg * Osna obremenitev: 9.000 / 9.000 kg * Dolžina polpriklopnika: 8.960 mm * Širina polpriklopnika: 2.550 mm * Višina polpriklopnika: 3.250 mm * Pnevmatske gume: 385 / 65 R 22,5 Lhjdpfx Aenpyg Ejhueh * Cena brez DDV * Vsi podatki so brez garancije Tel./WhatsApp: