Mlinček Za Oreščke In Sir nakup rabljenega (132.170)

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Multifix quick-change tool post with turning tool Coolant system Ncsdpovav Sdsfx Ah Ujt Foot switch Thread cutting possible (metric, Whitworth, module, pitch)

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Nedpfsvc Aklex Ah Uect Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Swing diameter over bed: 356 mm Swing diameter over cross slide: 220 mm Turning length: 1000 mm Centre height: 180 mm Distance between centres: 1000 mm Nodpfx Asw D Dcqoh Uect Spindle bore: 38 mm Speed range: 45 - 1800 rpm Longitudinal feeds: 0.043 - 0.653 mm/rev, 42 steps Tailstock quill taper: MT3 Tailstock quill travel: 95 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Machine dimensions approx. (LxWxH): 1.92 x 0.8 x 1.49 m (including display unit) Various accessories

Stanje: rabljeno, Leto izdelave: 1970, Technical Details: Swing diameter over bed: 325 mm Swing diameter over support: 150 mm Turning length: 1000 mm Turning length, facing: 165 mm / cross: 160 mm Center height over bed: 200 mm Length of gap: no gap mm Spindle speed range: 48 - 1,500 rpm / 10 steps Spindle bore: 40 mm Feeds: longitudinal: 0.021–2.34 mm, cross: 0.09–1.6 mm Tailstock quill taper: MK 4 Tailstock quill travel: 125 mm Total power requirement: 2.2 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Nedpfxsu Ixydj Ah Uoct Equipment: - 3-jaw chuck Ø 200 mm with internal clamping jaws - Multifix quick-change tool post - Foot brake - Coolant pump (supply exclusive)

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Nedpou Ix D Asfx Ah Uoct Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: rabljeno, Leto izdelave: 1951, Technical Details: Swing over bed: 400 mm Swing over cross slide: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Ncedeu Ix Hdjpfx Ah Uet Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions (LxWxH): 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been rewired and fitted with a new control cabinet. Emergency stop switch and chuck guard 3-jaw chuck, Ø 250 mm Live centre Toolpost: four-way toolholder Compound slide swivels approx. 30° to the right/left Taper turning attachment (taper 15° right/left) 4 change gears included

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over face slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm / only 6-step left-right Feed range X-axis: longitudinal: 0.02–0.8 m/min Feed range Y-axis: cross: 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel distances: longitudinal slide = 580 mm, cross slide = 170 mm - incl. tool rest - incl. change gears - Steady rest Ø 100 mm - Four-way toolpost The machine is operating with restricted function! Nedpfx Aju Ix Hqsh Usct 6 spindle speeds are currently selectable! (224/1800; 280/2240; 355/2800 rpm) Sale as described.

Stanje: rabljeno, Tehnične podrobnosti: Obratovalne ure: 2151 h Čas vklopa rezkalne glavne osi: 2 h Čas vklopa stružne glavne osi: 709 h Nodeydvfcepfx Ah Ujct Obhodni premer: 1000 mm Stružni premer: 900 mm Maks. višina obdelovanca: 800 mm Krmiljenje: Mazatrol Smoothg os X: 470 mm os Z: 876 mm os C: 20 m/min Držala za orodja / postaje: 12 Hitrost revolverja: 4000 obr/min Teža obdelovanca: 3000 kg Hitri pomik v X- in Z-smeri: 24 m/min Približna masa stroja: 14 t Približne mere stroja (DxŠxV): 3989 x 2375 x 3400 mm

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Notranji premer: 63 mm Zunanji premer: 800 - 320 mm Globina brušenja: 380 mm Dimenzije brusnega kolesa: Ø 65 x 25mm (posodasto kolo) Podajalna hitrost: 0,05 - 0,40 obr/min / 8-stopenjska obr/min Skupna potrebna moč: pribl. 1,1 kW Teža cca: 1060 kg Mere stroja cca. DxŠxV: 1,1 x 1,1 x 1,4 m Stružnica in brusilni stroj za zavorne bobne in kolute - Max./min. premer struženja in brušenja: 800 / 320 mm Njdpfxeu Ngaue Ah Ujct - Vpenjanje zavornega bobna: 63 mm, hod pinole 120 mm - Vzdolžna pomikalna miza: vzdolžna pot 380 mm; prečna pot 200 mm - Nosilec za brušenje: prečni hod 60 mm; motor = hitrost vrtenja 3410 obr/min - Upravljanje preko kontrolne plošče

Leto izdelave: 2003, stanje: rabljeno, Technical details: Workpiece length: 130 - 2000 mm Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Machine weight approx.: 4,500 kg CNC milling and deburring machine for both ends of tubes or round steel. - Material feed via conveyor belt, travel length approx. 3,300 mm - Brush unit type PGAS 8/100 V-HV on both sides/opposed, speed 10,000 rpm (driven by compressed air) - Milling cutter holders, both sides/opposed - Milling spindle and brush holder arranged in sequence Ncsdsu Ngc Njpfx Ah Uet - Operation via control panel on the control cabinet Supports: - 2 units: 1x movable, 1x fixed - Lateral adjustment of right support: length 1,725 mm manually - Working strokes: cross = 5-50 mm; longitudinal = 5-50 mm - Working spindle: max. speed 320 rpm.

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Rotary Table: Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. Nedju Id H Aepfx Ah Uoct CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Best regards.

Stanje: rabljeno, Leto izdelave: 1963, Technical details: Swing diameter over bed: 1000 mm Swing diameter over saddle: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Nsdpfx Aju Ix Areh Ujct Swing diameter in gap: 1200 mm Length of gap: 800 mm Machine weight approx.: 11.5 t Machine dimensions approx. LxWxH: 7.5 x 1.5 x 1.7 m Including 2 steadies and various centres

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Ncsdpfx Ahou Ix Dcj Ust Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 400 mm Swing diameter over carriage: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis: longitudinal: 0.08 - 1.10 m/min Feed range y-axis: cross: 0.028 - 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws - Multifix tool post - Coolant system with pump - Chuck guard - Chip tray Njdpju Ix E Hjfx Ah Uect - Splash guard Accessories: - Chuck key - Tool holder - 2 gears

Stanje: rabljeno, Leto izdelave: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 1000 mm Centre height measured in bed: 250 mm Centre distance: 1000 mm Nedpfx Ahsvvrpke Uoct Spindle speeds: 18...1800 / 21 step rpm Spindle bore: 56 mm Tailstock quill stroke: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change tool post Coolant system Accessories: various reduction sleeves MK3-MK5-MK4 Live centre Driving dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV regulations!

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat Ncodpfx Aevadd Ioh Uot - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Copying attachment

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 460 mm Premer struženja nad suportom: 350 mm Dolžina struženja: 1500 mm Višina konice: 250 mm Ncjdpfx Ahswa Nwfo Ujt Vrtina delovne vretena: 52 mm Območje vrtljajev: 35 - 1800 min⁻¹ Hod pinole konjička: 230 mm Konjičkovo vpenjanje MK: MK4 Približna teža stroja: 2,7 t Dimenzije stroja pribl. D x Š x V: 2,88 x 1,2 x 1,5 m Črpalka za hladilno tekočino z dovodom do ročnega ventila Pribor: luneta D = 130 mm zaprta 3-čeljustna vpenjalna glava D = 315 mm Forkhardt F315

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, leto zadnje generalne obnove: 2026, vhodna napetost: 400 V, Certificirano po DGUV do: 06/2027, skupna dolžina: 615 mm, skupna širina: 640 mm, skupna višina: 1.380 mm, električna varovalka: 16 A, vhodna frekvenca: 50 Hz, Mešalni stroj Rego SM 2 + obnovljen Nodpow Tqizjfx Ah Uect Stacionarni stroj 2 delovni funkciji: 1x mešanje / 1x stepanje Osvetlitev kotla Priključek 400V, 16A-CEE vtič Mere: 640 x 615 x 1380 mm (ŠxDxV) Rabljeni, obnovljeni stroj Kakovost iz strokovne delavnice! Izkoristite več kot 35 let izkušenj! Možnosti: Obročasti plinski gorilnik Vzdrževalna pogodba E-box za večjo varnost Dostava Na voljo imamo veliko izbiro mešalnih strojev!

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2026, vhodna napetost: 400 V, Certificirano po DGUV do: 06/2027, skupna dolžina: 1.140 mm, skupna masa: 285 kg, skupna širina: 800 mm, skupna višina: 1.620 mm, električna varovalka: 16 A, vhodna frekvenca: 50 Hz, lastna masa: 285 kg, Mešalnik Rego SM 2000 M Njdpow Tqihefx Ah Usct Stroj, ko gre za stepanje! Mešalnik z avtomatskim časovnim vklopom 2 delovni funkciji: 1 x mešanje / 1 x stepanje Ročno dvigovanje kotla Osvetlitev kotla Priključek: 400V, 16A-CEE vtič Rabljeni stroj, obnovljen z garancijo + servis rezervnih delov + Kakovost iz specializiranega podjetja! Izkusite več kot 35 let izkušenj! Opcije: Nov kotel Nova metlica Plinski obročasti gorilnik Vzdrževalna pogodba Servisni paket Dostava Usposabljanje / Zagon Obiščite našo veliko razstavo pekarskih strojev!

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, Elektronska naprava za doziranje vode s prikazom temperature NOVO +++ NOVO WMD Aquamix 11 NOVO +++ NOVO Vaše prednosti: - brzo i precizno unošenje količine vode - pregledna upravljačka ploča s velikim, svijetlim prikazom - kompaktno i kućište od nehrđajućeg čelika otporno na prašinu od brašna - jednostavno spajanje na sustav ledene vode Nodpfxofmciij Ah Uoct - s automatskom funkcijom ponavljanja Tehnički podaci: - Raspon doziranja: 0,1 l - 999,9 l - Točnost prikaza temperature: samo prikaz - Točnost doziranja od 1 l: +/- 0,1 l - Protok vode pri 3 bara: do 30 l/min - Priključak za vodu: 3/4" vanjski navoj - Samo kod nas DGUV V3 ispitano - Priključak na struju: 100 - 240V - Dimenzije uređaja (Š x V x D): 200 x 300 x 130 mm - NOVO i SAB testirano - s jamstvom + servis rezervnih dijelova Opcije: - Leasing i najam - Montaža - Dostava i puštanje u rad Posjetite naš prodajni centar i pogledajte još strojeva i uređaja!

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, skupna dolžina: 172 mm, skupna širina: 229 mm, skupna višina: 391 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 220 V, trajanje garancije: 24 meseci, Certificirano po DGUV do: 06/2028, temperatura okolja (min.): 15 °C, NOVO +++ NOVO Edhard stroj za polnjenje peciva, serija P NOVO +++ NOVO Polnilnik za avtomatsko polnjenje peciva Nastavljiva dozirna količina preko digitalne nadzorne plošče 5,5-litrski lijak z nastavkom Namizna naprava S tem polnilnim in dozirnim sistemom se mase neposredno dozirajo v 2 kosa peciva preko dveh 57 mm dolgih in 7 mm debelih polnilnih špic. Plastični lijak ima kapaciteto 5,5 litra. Motorsko podnožje sproži delovanje ob vsakem pritisku stikala. Natančno se vbrizga nastavljena količina, do največ 800 g. Nedpfxsfxk Txj Ah Usct Samo pri nas: preverjeno po DGUV V3 Priključek: 220V, 44 W Mere: 172 x 391 x 229 mm (D x V x Š) NOVA naprava, SAB preverjena Z garancijo in servisom rezervnih delov Obiščite našo trgovino Milbrandt s testno pekarno in številnimi pekarskimi stroji ter napravami!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, globina grla: 2.700 mm, najv. debelina pločevine: 13 mm, najv. debelina jeklene pločevine: 13 mm, skupna masa: 2.120 kg, skupna širina: 1.200 mm, skupna dolžina: 4.500 mm, skupna višina: 2.000 mm, potrebna višina: 2.300 mm, zahteva za prostor dolžina: 4.800 mm, vhodna napetost: 400 V, Obnovljen in v odličnem stanju Pullmax Kumla F13C stroj za obrobljanje robov na prodaj. Obrobljanje jeklenih pločevin do 13 mm, obrobljanje nerjavečih pločevin do 10 mm! Ncsdey Tni Tepfx Ah Uot

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. Ncjdpfxed Hkqhs Ah Uot The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: rabljeno, Proizvajalec: Kuderer Maschinenbau GmbH Model: AZ-2 Leto izdelave: 1992 Nedpfx Ahey N Nw Re Ujct Tračni brusilnik Skupne dimenzije: 1000 x 440 x 1080 mm Dimenzije traku: 150 x 1440 mm Moč: 1,5 kW Ekstraktor Skupne dimenzije: 560 x 560 x 690 mm

Stanje: rabljeno, Leto izdelave: 1996, Dolžina obdelovanca: 55–170 mm Največja širina obdelovanca: 28 mm Največja višina obdelovanca: 27,5 mm Število rezkalnih agregatov: 2 Prečna žaga: 1 Posebni stroj: avtomat za žaganje in rezkanje APK za odrezovanje na dolžino in naknadno rezkanje lesenih blokov. Posebna izvedba za izdelavo vložkov vstavkov za predale s priborom (glej slike) ali podobnih obdelovancev. Ncodpoy Ty Hqefx Ah Uot Delovni potek: 1. Dovod materiala iz zalogovnika 2. Odrez (žaganje) na želeno dolžino 3. Rezkanje odrezanih obdelovancev 4. Izmet končnega kosa.