Kraussmaffei Km 200-700 C2 nakup rabljenega (31.342)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: colour monitor integrated with the operator console The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nwodpfx Aoyugkweh Uog Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Size of mounting plates (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater power: 29 kW Number of heating zones, cylinder: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class quality and proven industrial technology - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Increased lifetime of hydraulic components - Possibility to retrofit existing hydraulic injection moulding machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Nwedpfx Ahoyugfze Uog Control panel: colour monitor integrated with the control desk Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for thermoplastics processing, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2210 × 1910 mm Tie bar spacing (H × V): 1550 × 1250 mm Mould opening stroke: 2,000 mm Minimum mould height: 600 mm Maximum mould height: 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical and Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 82 kW Number of barrel heating zones: 7 Number of dry cycles (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions and Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. Key benefits: - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy loss during idle operation - Lower heating of the hydraulic system - Prolonged lifespan of motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce running costs while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Krauss Maffei KM 1300-12000 MX injection moulding machine Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for processing thermoplastics and is equipped with a complete plasticizing unit featuring abrasion protection. Technical Specifications Clamping Unit Clamping force: 13,000 kN Mould opening force: 910 kN Platen dimensions: 2210 × 1910 mm Tie bar clearance: 1570 × 1270 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection Unit Screw diameter: 105 mm Injection pressure: 2296 bar Shot volume: 5195 cm³ Shot weight for PS: 4728 g Injection rate: 856 cm³/s Plasticizing Parameters Nedpfx Aoyrrwkoh Uewg Screw speed: 103 / 145 rpm Plasticizing rate (PS): - Standard speed: 122 g/s - Increased speed (option): 171 g/s Electro-hydraulic Equipment Nominal pump motor power: 132 kW Installed heater power: 71 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap 6: 765 cycles/h Hydraulic oil tank capacity: 2440 l Dimensions and Weight Net weight with control cabinet: 70 tons Installation dimensions: 13.03 × 3.65 × 2.82 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine Year of manufacture: 2025 Machine equipped with a five-point, double toggle clamp mechanism (three-platen system) featuring a servo-electric drive for the clamping unit. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing unit Complete unit for thermoplastics Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle opening: 6 mm Clamping unit Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar clearance (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Nodpfoyft Nzox Ah Uswg Opening width: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection throughput: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater power: 29.2 kW Number of cylinder heating zones: 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight with control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in a modern servo-electric configuration, offering high precision, energy efficiency, and process repeatability.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, razmak između stupova: 1.120 mm, tlak vbrizgavanja: 1.795 letvica, hod izmetalca: 250 mm, Nižja cena ni določena - zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Enota za zapiranje Sila zapiranja: 8.000 kN Razmak med stebri (v x h): 1.120 mm x 1.000 mm Največja odprtina orodja: 1.400 mm Minimalna/maksimalna vgradna višina orodja: 600 mm / 1.100 mm Hod odprtja pritrdilne plošče: 2.000 mm Hod izmetalca: 250 mm Sila izmetalca: 226 kN (v nasprotni smeri: 59 kN) Nedpfx Asy Ulhcsh Ujwg Enota za brizganje Premer polža: 95 mm Razmerje L/D: 23 Tlak brizganja: 1.795 bar Prostornina za brizganje: 3.367 cm³ Brizgalna teža za PS: 3.064 g Zmogljivost brizganja: 690 cm³/s Sila šobe za zapiranje: 166 kN PODROBNOSTI O STROJU Model krmiljenja: MC4 Pogonska moč črpalk: 90 kW Moč gretja: 61 kW Dimenzije & Teža Dimenzije stroja (D x Š x V): 10,4 m x 2,86 m x 2,39 m Neto teža: 45 t

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 22 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61035145, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 2.429 letvica, injekcijska masa: 140 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 120 mm, odmični hod: 950 mm, vgradna višina: 450 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 6.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection molding, enabling you to respond quickly and innovatively to market requirements. It combines high performance, easy operation, and short delivery times. It can be used in a wide range of applications, for example in the packaging industry, electrical and electronics industry, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Realization of demanding delivery times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM  MC P1 with 15" TFT color display with multitouch functions CLAMPING UNIT  Clamping force kN 1200  Maximum mold opening force kN 180  Tie bar spacing (h x v) mm 520 x 470  Mounting platen (h x v) mm 690 x 640  Mold height min. - max. mm 180 - 450  Maximum opening stroke mm 850  Maximum mold opening travel mm 450  Ejector drive electric  Ejector stroke mm 120  Ejector force forward/backward kN 27 / 33  Ejector speed forward/backward mm/s 300 / 300  Maximum mold weight kg 850 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 22.9  Injection pressure bar 2429 Nwodpfsy Rmwdex Ah Ujg  Shot volume cm³ 154  Shot weight at max. stroke for PS g 140  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive / speed 1/min 374  Plasticizing rate (standard screw)4) g/s 18.9  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 22.7  Installed heating power kW 11.5  Power supply V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 6.7  Length x width x height m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing unit  BluePower full insulation for plasticizing cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface pneumatic cascade 4-fold  Euromap interface for handling E18 + E67  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Electrical pre-equipment for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.609 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61008195, vpenjalna sila: 800 kN, premer vijaka: 40 mm, razmak između stupova: 420 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 183 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 750 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series impresses with exceptionally compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with a cantilevered clamping unit provides generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with the BluePower servo drive further establishes a powerful foundation to meet the highest demands and to provide the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Max mold opening force: kN 55 - Tie bar clearance (h x v): mm 470 x 420 - Mounting plate size (h x v): mm 670 x 670 - Mold installation height min.-max.: mm - Maximum daylight opening: mm 750 Nodpfey Rlmwex Ah Uswg - Max. mold opening stroke: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force forward/return: kN 23 / 10 - Ejector speed forward/return: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT - Screw diameter / Type: mm 40 / Standard (other diameters available) - Effective L/D ratio: 20 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow: cm³/s 126 - Screw drive/speed: rpm 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phase with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 3.55 - Length x width x height: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control zone for nozzle heating - Air valve, single (BWAP) - Pneumatic control for hot runner closure, single - Hydraulic core pull, single (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression mode - Graphics analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Krauss Maffei Injection Moulding Machine KM 350-3000 CX Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 19-inch control panel featuring a colour touchscreen, LED backlighting, and visualisation of all ongoing processes (ProcessDesigner). Plasticising unit Complete plasticising unit for thermoplastics, abrasion-resistant version, with an 80 mm screw diameter, non-return valve and open nozzle. TECHNICAL DATA – STANDARD VERSION Clamping unit Clamping force: 3500 kN Opening force: 221 kN Platen dimensions (h x v): 1060 x 1095 mm Tie bar clearance (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95/49 kN Injection unit Screw diameter: 80 mm L/D ratio: 20.0 Nwsdpfxoy Tp Rlo Ah Uog Injection pressure: 1855 bar Shot volume: 1608 cm³ Shot weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticising capacity: 109.5 g/s Electrical-hydraulic equipment Pump motor rated power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time / stroke as per Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 l Dimensions and weight Net weight including control cabinet: 16.3 t Machine dimensions (L x W x H): 7.21 x 2.17 x 2.25 m

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 44731, vpenjalna sila: 500 kN, premer vijaka: 25 mm, razmak između stupova: 320 mm, injekcijska masa: 47 g, minimalna višina orodja: 200 mm, odmični hod: 550 mm, skupna dolžina: 4.000 mm, skupna širina: 1.163 mm, skupna višina: 1.787 mm, skupna masa: 2.300 kg, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vhodni tok: 58 A, Please refer to the images and video for the condition and contents of the offer. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. Nsdpfxox Srgge Ah Uowg You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our website to view this and other available offers. The stated company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the item description may occur and are reserved.

Stanje: novo, Bosch KM 2200-T 1070048799-307 kondenzatorski modul, ser. št. 005014224, neuporabljen, z dodatki, 100% funkcionalen Nodpfx Ahji D T U Rs Uowg

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 98.806 h, vpenjalna sila: 40.000 kN, premer vijaka: 130 mm, injekcijska masa: 8.100 g, skupna dolžina: 4.900 mm, skupna višina: 4.200 mm, skupna masa: 255.000 kg, # 🇫🇷 Annonce de Vente 2x KraussMaffei KM 4000-19000 MC – Presses à injecter – Année 1998 À vendre : deux presses à injecter identiques du fabricant KraussMaffei, modèle KM 4000-19000 MC, équipées d’une commande MC3F. Ces machines sont spécialement conçues pour la production de grandes pièces plastiques nécessitant une très forte force de fermeture. Les installations sont entièrement équipées, comprenant plusieurs périphériques pour l’alimentation matière et la gestion du procédé. ## Données techniques * Fabricant : KraussMaffei * Modèle : KM 4000-19000 MC * Commande : MC3F * Année de fabrication : 1998 * Heures machine : env. 98 806 h * Force de fermeture : 40 000 kN * Poids d’injection max. : 8 100 g * Diamètre de vis : 130 mm ## Dimensions & Poids Nodpfoyt Hy Nsx Ah Uowg * Profondeur machine : 4 900 mm * Hauteur machine : 4 200 mm * Poids machine : env. 255 000 kg ## Équipements * Interface robot : KUKA KRC4 * Commande d’injection séquentielle : S.I.S.E. IS-Tech * Thermorégulateurs : GWK * Système de dosage et de mélange : Motan Colormetric * Convoyeur à bande ## Machines disponibles * Machine n°14 * Machine n°15 Les machines peuvent être achetées séparément ou en lot. Visite sur rendez-vous possible.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036679, vpenjalna sila: 1.600 kN, premer vijaka: 40 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 Nwedjyzz Irepfx Ah Ujg - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 61.300 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, razmak između stupova: 470 mm, pritisk: 2.429 letvica, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: We are also actively purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Operating hours: 61,300 h Control system: MC5 Closing Unit Technical Data Clamping force: 1,200 kN Tie bar spacing (H x V): 470 x 470 mm Platen size (H x V): 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. daylight: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric location moving platen D: 160 mm Centric location fixed platen D: 125 mm Permissible mould weight: 1,485 kg Injection Unit Technical Data Screw diameter: 35 mm Shot volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 L/D Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free-flow injection rate: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 6m x 1.7m x 2.19m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras+++ Automation: Handling device/Take-out robot included - Handling: LR 100-2300 Conveying system: Roller conveyor included CE mark: Present Complete maintenance and inspection history Full latest test report Incl. conveyor belt and protective cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrical Equipment Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty until initial commissioning Njdjy D Adtjpfx Ah Ujwg Loading/Shipping Free loaded onto the buyer's truck or free delivered within Germany against freight charge. Available ex our warehouse Hannover, Germany.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, Clamping Force: 1600 kN Max. Tool Opening Force: 87 kN Moving Platen Drive Force (opening): 45 kN Moving Platen Drive Force (closing): 38 kN Clamping Plate (H x V): 820 x 845 mm Clear Tie Bar Spacing (H x V): 520 x 520 mm Mould Opening Stroke: 650 mm Min. Mould Installation Height: 300 mm Max. Opening Width: 950 mm Ejector Stroke: 150 mm Ejector Force (forward/back): 23 kN Injection Unit: Screw Diameter: 50 mm L/D Ratio: 20 Injection Pressure: 1892 bar Nwjdey Nlb Sjpfx Ah Ueg Stroke Volume: 393 ccm Shot Weight (PS): 358 g Injection Flow Rate: 177 ccm/s Screw Speed: 265 rpm Plasticizing Rate: 36.2 g/s Nozzle Contact Force: 50 kN Electro-Hydraulic Equipment: Rated Pump Motor Power: 22 kW Installed Heating Capacity: 16 kW Cylinder Heating Zones: 5 Oil Capacity: 489 l Dimensions & Weights: Floor Space Approx.: 5.50 x 2.00 x 2.20 m Overall Weight: 8200 kg Max. Mould Weight: 1862 kg Accessories: - Oscillation elements - BluePower - Servo Pump Drive Additional Equipment: - 1 x Air Valve - 8 x Hot Runner Control Zones - 2 x Core Pull on Moving Platen - 2 x Core Pull on Fixed Platen - Robot Interface according to Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 57.830 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 70 mm, delovna prostornina: 1.047 cm³, Zaklepna sila 3000 kN Maks. sila za odpiranje orodja 160 kN Pogon pomične plošče, odpiranje 86 kN Pogon pomične plošče, zapiranje 68 kN Vpenjalna plošča (š x v) 995 x 1050 mm Prost prehod (š x v) 630 x 630 mm Hod odpiranja orodja 820 mm Minimalna višina vgradnje orodja 330 mm Maksimalna odprtina 1150 mm Izmetalni hod 200 mm Izmetalna sila naprej/nazaj 58 kN Brizgalna enota: Premer polža 70 mm Razmerje L/D 20 Brizgalni tlak 1778 bar Volumen hoda 1047 ccm Teža brizgalnega strela (PS) 953 g Pretok vbrizgavanja 400 ccm/s Hitrost vrtenja polža 218 1/min Pretok plastifikacije 75 g/s Sila šobe 82 kN Elektrohidravlična oprema: Nazivna moč črpalnega motorja 55 kW Vgrajena moč gretja 30 kW Regulacijske cone cilindričnega gretja 6 Polnjenje z oljem 720 l Dimenzije in teža: Potreben prostor pribl. 6,20 x 2,20 x 2,40 m Skupna teža 12500 kg Največja teža orodja 3430 kg Dodatki: - Nihajni elementi Njdpsy Nk Taofx Ah Ujwg Dodatna oprema: - 1 x zračni ventil - 2 x izvleki jedra - Robotski vmesnik po Euromap 12

Leto izdelave: 2020, stanje: novo, Krauss Maffei touch panel, latest version for MC5/MC6, spare parts Width: 37 cm Nwedpjqvuicofx Ah Ujg Height: 47 cm Depth: 8 cm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as a dealer in injection molding machines, are offering the following well-maintained used injection molding machine: Of course, we are also actively purchasing well-maintained injection molding machines from the year 2010 onwards. We have been a major dealer in used injection molding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery: As of 01/07/2025, used machines can also be subject to a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to new equipment, you may claim the same depreciation amounts as for new machines. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Currently available in our tested warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Nedpfx Ahoxqhuuo Ujwg Year of manufacture: 2010 Operating hours: 65,850 h Machine Number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2x core pulls (movable core, fixed core) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection performance - Fast SK shut-down CX Midrange - Ejection of cooled nozzle plug - Start handling during mold movement - Start-up mode - Cycle time analysis - External USB keyboard - Graphic analysis with maintenance notes - Electronic coding injection unit - Pneumatic valve on BWAP for blow-out - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target/actual comparison - PV control - Active back pressure control - Single owner – German origin - Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2,500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening stroke: 820 mm Mold height: min. 330 mm Max. daylight: 1,150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrical Equipment Pump: 45 kW Heaters: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software included Available immediately from our warehouse in Hannover, Germany, ex works or delivered free to your site (shipping costs apply). The machine is offered function-tested and is in our sole ownership. The requested machine is immediately available in our Hanover warehouse, is offered function-tested, and may be inspected under power. For additional information about our machines and company: - We sell only machines purchased from active production that are in our own stock in Hannover. - All offered machines are tested and inspected before dismantling. - We DO NOT sell insolvency assets and we are NOT brokers handling third-party equipment. - All machines offered come from successful companies where maintenance and care are self-evident. - All machines offered are available for inspection at our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 47.137 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61020607, vpenjalna sila: 1.300 kN, razmak između stupova: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current note – Tax information and benefit for used machinery: From 01.07.2025, used machines can also be depreciated for tax purposes with a special depreciation rate of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster (§ 7 Para. 2 EStG-E) Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-colour, 2-component machine Nsdoyf Uy Uspfx Ah Uswg Control: MC6 Year: 2014 Machine-No.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st Injection Unit 750 horizontal Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit 180 vertical Screw diameter: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2,500 bar Clamping Unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. daylight: 900 mm Min. mould height: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – full machine card as PDF document attached Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pull 1 x blow-off Water BGS: 6 circuits each, nozzle side and ejector side BluePower technology up to 40% energy savings The machine is very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or delivered to site with freight costs reimbursed. Information about the machines we offer and our company: - We only sell machines acquired from ongoing production from our own stock in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency goods – we are NOT brokers trading third-party property - All machines offered come from successful businesses where maintenance and care are standard - All offered machines can be inspected at our warehouse

Stanje: rabljeno, prevoženi kilometri: 19.700 km, moč: 75 kW (101,97 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, prva registracija: 11/2003, naslednji pregled (TÜV): 01/2027, emisijski razred: Euro 3, barva: bež, število sedežev: 5, Oprema: ABS, centralno zaklepanje, parkirni grelec, pogon na vsa štiri kolesa, sistem za imobilizacijo, 1st owner. Original mileage only 19,700 km. With service booklet. Last service in 2025 at 17,983 km. Engine, transmission, and rear axle oils replaced. Timing belt also new. Tyres were replaced at the same time; fitted are Semperit winter tyres from DOT 2023/2024. Manufactured in 02/2003, first registration in 11/2003. One of the last T4 syncro models produced. Long wheelbase. Originally, the vehicle was technically specified ex works for standard passenger car (9-seater) registration. However, this registration was immediately cancelled in the original vehicle registration document, as the vehicle was always used exclusively as an emergency rescue vehicle. Actual registration type has always been "Other vehicle type - Water Rescue Emergency Vehicle". Currently, 5 seats are registered and genuinely present, all made of durable and easy-care synthetic leather. Nwjdpfx Ahjyyfr Ss Ueg SORTIMO shelving units are installed in the rear, previously used for storing emergency equipment and uniforms. Unladen weight according to documents: 2270 kg. Permissible gross weight: 2890 kg. Overall exterior dimensions of this VW T4: Length 5107 mm / Width 1840 mm / Height with special warning lights 2100 mm (without the blue lights: 1920 mm). Sliding door on the right and double rear wing doors. Dent at the left rear. All doors function smoothly and without noise. WEBASTO AirTop 3500D auxiliary heater. Towbar with ball hitch rated for 2000 kg braked trailer load / 750 kg unbraked. Maximum gross train weight: 4500 kg. 2.5-litre TDI five-cylinder diesel engine. 2461 cc. 102 hp. Engine code: AXL. 5-speed manual gearbox. Differential lock. ABS. Power steering. Driver and passenger airbags. Central locking with remote. 2 original VW keys with remote-control included. Electric windows and electrically adjustable exterior mirrors. Maximum speed registered: 155 km/h. The T4 was recently driven over 600 km on the motorway to us without issues. It runs excellently and is in good original condition. MOT (TÜV) valid until 01/2027. This offer is valid only for commercial operators and freelancers of any kind, as well as for authorities/emergency services. Unfortunately, sale to private individuals is generally not possible. Subject to prior sale and errors. The syncro is immediately available from us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 9.585 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.600 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, skupna dolžina: 6.700 mm, skupna širina: 1.600 mm, skupna višina: 2.300 mm, skupna masa: 10.900 kg, Zapiralna sila: 1.600 kN - kolenčasta ročica Steberna razdalja: 520 x 470 mm Velikost plošče: 710 x 660 mm Vgradna višina: 200 - 500 mm Odpiranje: 950 mm Premer polža: 55 mm Prostornina hoda: 523 ccm Tlak brizganja: 1.904 bar Oprema Zaslon v nemškem jeziku CEE vtičnica 16A CEE vtičnica 32A Tlačni akumulator za povečano zmogljivost vbrizgavanja Po 3 prosto programabilni vhodni in izhodni kanali Jedrni izvlek pnevmatski, 2 x Stroj z vodnim baterijskim hladilnikom Stroj brez dozirnega lijaka Izravnalni elementi Vmesnik za barvalno napravo Vmesnik za temperirno napravo Njdpfxoy Aktmo Ah Uewg USB vmesnik Schuko vtičnica 10A Obrabno odporna plastificirna enota Ogrevanje orodja 24x Dimenzije stroja D x Š x V: 6.700 x 1.600 x 2.300 mm Skupna teža: 10.900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, vpenjalna sila: 1.300 kN, premer vijaka: 55 mm, delovna prostornina: 523 cm³, tlak vbrizgavanja: 1.904 letvica, injekcijska masa: 479 g, minimalna višina orodja: 300 mm, Zapiralna sila: 130t Leto izdelave: 2008 Teža vbrizga: 475,9g Vbrizgalna enota 1000 Premer polža: 55 mm Specifičen tlak vbrizga: 1904 bar Volumen vbrizga: 523 ccm Teža vbrizga: 475,9 g Zapiralna sila: 130 t Dimenzije orodnih plošč: 745 x 745 mm Nodpfxjynzrps Ah Uswg Razmak med stebri: 470 x 470 mm Sila izmetalca: 22,6 kN Višina orodja: 300 mm Odpiralna pot: 600 mm Maksimalna razdalja med ploščami: 900 mm Teža: 8000 kg Leto izdelave: 2008 Krmiljenje: MC5 Oprema: - Akumulator - Priključek euromap 67 - 2x pnevmatski ventil - Hidravlično jedro na gibljivi plošči

Stanje: dober (rabljeno), vpenjalna sila: 3.000 kN, Proizvajalec: KraussMaffei Model: KM 300-1400 C2 Tip stroja: Hidravlični brizgalni stroj Leto izdelave: 1999 Zapiralna sila: 3000 kN Nwjdpfx Aheytnnzo Ueg Mednarodna oznaka velikosti: KM 1400 C2 / 300 Teža stroja: 12.500 kg Oznaka CE: prisotna Na voljo 2 kosa Dodatne informacije na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 78.454 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 60 mm, razmak između stupova: 630 mm, delovna prostornina: 678 cm³, tlak vbrizgavanja: 2.007 letvica, vgradna višina: 330 mm, skupna dolžina: 6.500 mm, skupna širina: 2.200 mm, skupna višina: 2.300 mm, Zapiralna sila: 3000 kN Mere stebra h x v: 630 x 630 mm Velikost plošče h x v: 995 x 1050 mm Minimalna vgradna višina: 330 mm Največja razdalja med ploščama: 1150 mm Hod odpiranja: 820 mm Premer polža: 60 mm Volumen hoda: 678 ccm Tlak brizganja: 2007 bar Oprema Stroj brez rokovanja Prikaz na zaslonu v nemščini CEE vtičnica 16A Tlačni akumulator za povečano zmogljivost vbrizgavanja Hidravlični izvlek jedra 2x Stroj brez materialnega lijaka Nivelirni elementi Vmesnik EUROMAP 67 za rokovanje Vmesnik za rokovanje Schuko vtičnica 10A Nedjyxmz Espfx Ah Uowg Dimenzije stroja D x Š x V: 6,5 m x 2,2 m x 2,3 m Skupna teža: 15000 KG

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 76.000 h, skupna višina: 2.480 mm, skupna širina: 2.330 mm, skupna dolžina: 9.830 mm, premer vijaka: 70 mm, vpenjalna sila: 4.200 kN, delovna prostornina: 1.047 cm³, Zapiralna sila: 4200 kN Velikost vodilnega stebra (h x v): 800 x 800 mm Velikost plošče (h x v): 1270 x 1200 mm Minimalna vgradna višina: 380 mm Maksimalna razdalja med ploščama: 1400 mm Odpiralni hod: 1020 mm Premer polža: 70 mm Prostornina hoda: 1047 ccm Vbrizgovalni tlak: 1778 bar 2. agregat 55 z ø 22 Vbrizgovalni tlak: 1674 bar Prostornina: 30 cm³ Razdalja med plastičirno enoto 1 in 2: 300 mm (piggyback postavitev / Z-položaj) Nodpfx Asyv E Ewsh Ujwg Oprema Zaslon v nemškem jeziku 6x hidravlični izvleki jedra Stroj brez manipulacije Stroj brez zalogovnika materiala Nastavljivi elementi 16x orodna gretja Dvo-komponentni brizgalni stroj Dimenzije stroja D x Š x V: 9,83 m x 2,33 m x 2,48 m Skupna masa: 23.090 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 54.872 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 55 mm, delovna prostornina: 570 cm³, tlak vbrizgavanja: 2.387 letvica, skupna dolžina: 6.500 mm, skupna širina: 2.200 mm, skupna višina: 2.300 mm, skupna masa: 15.000 kg, Zapiralna sila: 2500 kN Dimenzije vodil h x v: 630 x 630 mm Velikost plošče h x v: 995 x 1050 mm Vgradna višina min.: 330 mm Največja razdalja med ploščama: 1150 mm Odpiralna pot: 820 mm Premer polža: 55 mm Prostornina hoda: 570 ccm Vbrizgovalni pritisk: 2387 bar Oprema 2x regulacija temperature za vročekanalni sistem Nwjdpfoyv Elwsx Ah Uog Ekranski meni v nemščini CEE vtičnica 16A Tlačni akumulator za povečane vbrizgovalne zmogljivosti + izmetalec ali vleka jedra vzporedno Hidravlični izvlek jedra 1x Ventil za zrak 4x Stroj z lijakom za material Stroj z vodno baterijo Stroj brez ravnanja/rokovanja Elementi za niveliranje Vmesnik EUROMAP 12 Vmesnik EUROMAP 67 za ravnanje USB vmesnik Schuko vtičnica 10A Plastificirna enota z manjšo obrabo Dimenzije stroja D x Š x V: 6,5m x 2,2m x 2,3m Skupna teža: 15000 kg