Kombinacija Navijalnika In Ravnalnika nakup rabljenega (119.957)

Stanje: novo, M&S Gruseck GmbH NOVI bobni za presejanje priznanega tržnega vodje - 100% IZDELANO V NEMČIJI! Boben za presejanje, primeren za Doppstadt SM518 Kvadratne ravne odprtine (QG) 20 mm Debelina pločevine = 6 mm !!! Več kot 500 izdelanih bobnov za presejanje na leto govori samo zase !!! - Visokokakovostna izdelava! - Vedno preverjeno! Popolno vrtenje med obratovanjem! - Najboljše razmerje med ceno in zmogljivostjo - Kratki dobavni roki! - Izsekane odprtine za popolne rezultate siejanja! - Različne odprtine (kvadratne, okrogle, sataste ipd.)! - Majhni mostički za optimalno presejalno površino! Rsdpfsxnyhhjx Apbsu - Različne debeline pločevine! - Možno različni materiali (min. S355)! - Posebne želje kupcev so za nas običaj, ne težava! - Vsi bobni so lakirani! - Velika izbira na zalogi! - Za vse običajne presejalne stroje!

Stanje: novo, M&S Gruseck GmbH NOVE sejalne bobne vodilnega na trgu – 100 % IZDELANO V NEMČIJI! Sejalni boben primeren za Doppstadt SM718 Kvadraten zamaknjen preboj (RV) 80 mm Debelina pločevine = 10 mm !!! Več kot 500 izdelanih sejalnih bobnov letno govori zase!!! Rjdpsxnyzuofx Apbeu - Visokokakovostna izvedba! - Vedno preizkušeni! Natančno kroženje v delovanju! - Najboljše razmerje med ceno in zmogljivostjo - Kratki dobavni roki! - Preluknjane odprtine za popolne rezultate sejanja! - Različne izvedbe lukenj (kvadratne, okrogle, satje itd.)! - Majhni mostiči za optimalno sejalno površino! - Različne debeline pločevin! - Možni različni materiali (min. S355)! - Posebne želje strank za nas niso ovira, temveč naša specialnost! - Vsi bobni so lakirani! - Velika zaloga! - Za vse običajne sejalne stroje!

Stanje: novo, M&S Gruseck GmbH NOVI sejalni koši strokovnjaka – 100% IZDELANO V NEMČIJI! Sejalni koši ustrezajo seriji Doppstadt AK: 430, 435, 510, 535, 560, 635, 640 itd. - NAJVIŠJA KAKOVOST - Različne perforacije - Kratki dobavni roki Na zalogi tudi številni drugi rezervni deli: - Zadnji koši - Zadnja vrata - Različne udarne plošče - Obrabne plošče - Strgala za dno - Kladiva - Nosilci kladiv Rjdpfx Aoxp Nzmjpbju - ... IN ŠE VELIKO VEČ!

Stanje: novo, M&S Gruseck GmbH NOVE sejalne bobne vodilnega proizvajalca – 100% IZDELANO V NEMČIJI! Sejalni boben primeren za Doppstadt SM620 Kvadratna zamaknjena perforacija (QV) 15 mm Debelina pločevine = 6 mm !!! Več kot 500 izdelanih sejalnih bobnov letno govori samo zase !!! - Visoka kakovost! - Vedno pregledano! Natančno kroženje v delovanju! - Najboljše razmerje med ceno in zmogljivostjo - Kratki dobavni roki! - Preluknjane odprtine za popolne rezultate sejanja! Rsdpfx Apoxnyqiobeu - Različne perforacije (kvadratne, okrogle, satovje itd.)! - Majhni distančniki za optimalno sejalno površino! - Različne debeline pločevine! - Možni različni materiali (min. S355)! - Posebne želje strank niso problem, ampak naša specialnost! - Vsi bobni so lakirani! - Velika izbira na zalogi! - Za vse običajne sejalne stroje!

Stanje: novo, M&S Gruseck GmbH NOVE sejalne bobni vodilnega proizvajalca – 100% IZDELANO V NEMČIJI! Sejalni boben, primeren za Doppstadt SM620 Kvadratna zamaknjena perforacija (QV) 20mm Debelina pločevine = 8mm !!! Več kot 500 izdelanih sejalnih bobnov letno pove vse !!! - Visoka kakovost! Rodsxnyrgspfx Apbju - Vedno preizkušeno! Natančno kroženje v delovanju! - Najboljše razmerje med ceno in kakovostjo - Kratki dobavni roki! - Izsekane odprtine za popolne rezultate sejanja! - Različne perforacije (kvadratne, okrogle, sataste itd.)! - Ozki mostički za optimalno sejalno površino! - Različne debeline pločevine! - Možni različni materiali (min. S355)! - Posebne želje strank niso problem, temveč naša specialiteta! - Vsi bobni so lakirani! - Velika izbira na zalogi! - Za vse običajne sejalne stroje!

Stanje: novo, M&S Gruseck GmbH NOVE sejalne bobne vodilnega proizvajalca na trgu – 100% IZDELANO V NEMČIJI! Sejalni boben, primeren za Doppstadt SM518 Kvadratna zamaknjena perforacija (QV) 30 mm Debelina pločevine = 8 mm !!! Več kot 500 izdelanih sejalnih bobnov na leto govori samo zase !!! - Visokokakovostna izdelava! - Stalno testirano! Gladko delovanje! - Najboljše razmerje med ceno in kakovostjo - Kratki dobavni roki! Rsdpfx Apexnyl Tjbou - Strojno izsekane odprtine za popolne rezultate sejanja! - Različne perforacije (kvadrat, krog, satje itd.)! - Ozki mostički za optimalno sejalno površino! - Različne debeline pločevine! - Možni različni materiali (najmanj S355)! - Posebne zahteve strank za nas niso problem, temveč naša specialnost! - Vsi bobni so lakirani! - Velika zaloga na voljo! - Primerno za vse običajne sejalne stroje!

Stanje: novo, M&S Gruseck GmbH NOVE bobnaste site vodilnega proizvajalca – 100 % IZDELANO V NEMČIJI! Bobnasta sita, primerna za Doppstadt SM620 Rjdpfexnywpjx Apbou Kvadratna zamaknjena perforacija (QV) 30 mm Debelina pločevine = 8 mm !!! Več kot 500 izdelanih bobnastih sit na leto govori samo zase !!! - Visokokakovostna izvedba! - Stalno preverjano! Zagotovljen brezhiben tek med obratovanjem! - Najboljše razmerje med ceno in zmogljivostjo - Kratki dobavni roki! - Preluknjane odprtine za popolne rezultate sejanja! - Različne vrste perforacij (kvadratne, okrogle, satovje itd.)! - Majhni mostički za optimalno sito površino! - Različne debeline pločevin! - Možnost različnih materialov (min. S355)! - Posebne želje kupcev niso problem, ampak naša specialiteta! - Vsi bobni so lakirani! - Velika zaloga! - Za vse običajne sejalne stroje!

Stanje: novo, M&S Gruseck GmbH NEW drum screens from the market leader – 100% MADE IN GERMANY! - Drum screen suitable for Doppstadt SM620 - Square staggered perforation (QV) 80 mm - Plate thickness: 10 mm !!! More than 500 drum screens produced per year speak for themselves !!! - Premium quality - Consistently tested – true running in operation - Excellent price-performance ratio - Short delivery times - Punched perforations for perfect screening results - Various perforation types available (square, round, honeycomb, etc.) - Small webs for optimal screening surface - Available in different plate thicknesses - Different materials possible (at least S355) - Special customer requirements are not a problem, but our specialty! - All drums are painted - Large inventory in stock Rsdpfoxnyykex Apbeu - Suitable for all common screening machines

Stanje: novo, M&S Gruseck GmbH NOVE sejalne bobne vodilnega na trgu - 100 % IZDELANO V NEMČIJI! Redsxnylaspfx Apbou Boben za sejanje, primeren za Doppstadt SM518 Kvadratna zamaknjena perforacija (QV) 10 mm Debelina pločevine = 6 mm !!! Več kot 500 izdelanih sejalnih bobnov na leto govori zase !!! - Visoka kakovost! - Vedno preizkušeno! Zagotovljeno mirno vrtenje v delovanju! - Najboljše razmerje med ceno in kakovostjo! - Kratki dobavni roki! - Preluknjana perforacija za popolne rezultate sejanja! - Različne vrste perforacij (kvadratna, okrogla, satovje itd.)! - Majhni mostički za optimalno sejalno površino! - Različne debeline pločevine! - Različni možni materiali (najmanj S355)! - Posebne želje strank niso problem, temveč naša specialnost! - Vsi bobni so lakirani! - Velika izbira na zalogi! - Za vse običajne sejalne stroje!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100.000 h, vhodna napetost: 4.000 V, vrsta vhodnega toka: trifazni, skupna dolžina: 65.000 mm, skupna masa: 40.000 kg, model krmilnika: partially manual, Oprema: transportni trak za ostružke, Linija za valoviti karton, profil C, B, E, enote 1530 mm, noge navijalnega stroja 4/3 enojne in 1 dvojna, enota za prenos lepila, grelni tunel, stranska rezalna in odrezna enota. Vključene so plinska in zračna postaja, enota za pripravo lepila. Vse so deli proizvodne linije. Rsdpfxswycrcj Apbou

Stanje: dober (rabljeno), Žična spirala za vezivanje, zaprta spiralna žica na kolutih. 3 palete spiral, 12 popolnoma novih spiral + 12 načetih spiral. Rsdpfxowunmbs Apbou V razmiku 3:1 in 2:1. Prodaja samo v kompletu.

Stanje: rabljeno, WEBSTER & BENNETT DH 48” NAVPIČNI STRUŽNIK IZDELEC: WEBSTER & BENNETT, IZDELANO V ANGLIJI Rsdpfx Apoxcn Hujbsu MODEL: DH 48” PREMER MIZE: 1219,0 mm MAX. OBDELAN PREMER: 1524 mm VIŠINA POD VODILOM: 650,0 mm HITROST: 4,5 – 100 min⁻¹ PODAJALNA HITROST: 0,0050” – 0,250” / 0,127 – 6,035 mm/min DODATNO: - 2-OSNI DIGITALNI PRIKAZ MITUTOYO - 4-ČELJUSTNI VPADEZ - 4 ČELJUSTI VPADCA - VARNOSTNA ZAŠČITA - PROTITEŽ - ČISTO STANJE STROJA

Stanje: rabljeno, Leto izdelave: 2004,

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1988, Funkcionalnost: nepreverjeno, številka stroja/vozila: 0278, premer struženja nad prečnim suportom: 240 mm, premer struženja nad ležiščem sani: 400 mm, višina središča: 120 mm, največja hitrost vretena: 2.000 obr/min, prehod palice: 53 mm, Brez minimalne cene - prodaja zagotovljena najvišjemu ponudniku! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 23.06.2026 in 26.06.2026! TEHNIČNI PODATKI Rsdpfxjy D Sdie Apbou Premer struženja nad posteljo: 400 mm Premer struženja nad suportom: 240 mm Hitrost vretena: 45 - 2.000 min⁻¹ Prehod vretena: 53 mm Razdalja med konicama: 1.000 mm Višina konice nad posteljo: 200 mm Višina konice nad suportom: 120 mm PODROBNOSTI STROJA Dimenzije & Teža Dimenzije (D x Š x V): 2.400 x 900 x 1.600 mm Teža stroja: 1.500 kg OPREMA Konjiček Multifix držalo za stružni nož Tročeljustna vpenjalna glava (premer: 200 mm) + še ena tročeljustna glava Držalo za stružni nož Stružna orodja Obojestranske rezalne ploščice Zunanja referenca: 11

Leto izdelave: 2004, stanje: rabljeno, model krmilnika: TLF POWERCONTROL, teža obdelovanca (maks.): 250 kg, dolžina plošče: 2.200 mm, širina plošče: 4.300 mm, številka stroja/vozila: 0-286-05-6067, Nižja cena ni določena - zagotovljena prodaja za najvišjo ponudbo! Rsdpfx Apsy Uvgisbju Odpeljati je potrebno stroj med 10.06.26 in 30.06.26! TEHNIČNE PODROBNOSTI Največja širina plošče: 4.300 mm Največja dolžina plošče: 2.200 mm Največja dvižna zmogljivost: 250 kg Skladiščna dolžina: 22.000 mm Skladiščna širina: 12.000 mm PODROBNOSTI STROJA Programska oprema za programiranje stroja: TLF POWERCONTROL Stroj se prodaja in dostavi v dejanskem in pravnem stanju ("kot je viden in sprejet") na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico osebno pregledati blago pred prevzemom in prevzema vso odgovornost za montažo, varnost in uporabo stroja na ciljni lokaciji. Zunanja referenca: 8523

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: 19500624, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 7 letvica, največja hitrost vrtenja: 18.000 obr/min, delovna višina: 1.000 mm, Original purchase price of the machine was €950,000! TECHNICAL DETAILS Milling Units / Motor Specifications Speed: 2,800 rpm Small milling unit motor power: 0.27 kW Small milling unit frequency: 300 Hz Small milling unit speed: 18,000 rpm Large milling unit motor power: 1.1 kW Large milling unit frequency: 200 Hz Large milling unit speed: 12,000 rpm Tool Data / Milling Cutter Data Clamping arm diameter (small milling unit): max. 8 mm Cutter diameter (small milling unit): max. 8 mm Clamping arm diameter (large milling unit): max. 10 mm Cutter diameter (large milling unit): max. 14 mm Electrical Data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Rsdoy Syuxepfx Apbju Pneumatic Data Operating pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 Nl/min Pneumatic line pressure limit at 70°C: approx. 15 bar Working Height Working height: 1,000 mm EQUIPMENT Clamping Units Vertical clamping Maintenance unit with filter regulator Control cabinet / saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile storage Tools: Two screwdrivers, three cutting discs

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 14 kW (19,03 KM), vhodni tok: 80 A, dolžina obdelovanca (maks.): 4.000 mm, številka stroja/vozila: 6080008129, TEHNIČNE PODROBNOSTI Maks. širina profila: 130 mm Maks. višina profila: 205 mm Maks. dolžina obdelovanca/profila: 4.000 mm Kapaciteta obdelave: 80 enot PODROBNOSTI O STROJU Priključek: 3 N/PE 400 V Frekvenca: 50 Hz Rsdpfoy Synlex Apbju Tok: 80 A Moč: 14 kW OPREMA Pogonjen, brezstopenjsko nastavljiv prijemalec Dvižna funkcija za nemoteno podajanje Vodenje profila na valjih Notranje prijemalo za preprečevanje poškodb profilov Integrirani merilni senzorji za nadzor dolžine obdelovanca Prevzem obdelovancev preko izhodne mize Portalna konstrukcija za velike preseke profilov Industrijski PC z Windows operacijskim sistemom Čitalec črtne kode

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with a Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Features integrated spindle motors, water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and sub-spindle. State-of-the-art SINUMERIK ONE control technology with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0–5000 rpm Sub-spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0–7000 rpm Tool turret: • 12-position VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis • Travel: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/sub-spindle • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remainder material detection • USB interface • Control cabinet air conditioning unit • Coolant system incl. reinforced pump (24 bar) • Chuck washing (additional pump 3.5 bar) • Parts ejector and flushing through sub-spindle Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control languages: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows use of the sub-spindle with installed live center to support workpieces. Shaft parts can therefore be supported and machined in machines without a tailstock by using the sub-spindle. Max. contact force is limited to 50% of max. axis force. EMCO PROFI-NET ROBOTER INTERFACE: Interface for robotic integration. Implementation via HARTING plug. Signal exchange via Profinet. Safety signals are dual-channel/potential-free. Digitization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard information includes: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece-count pulse (M30) • Programmable pulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically actuated finished parts catcher for gentle unloading of finished parts. Finished parts are transferred into a catch box (standard) or onto a conveyor (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connection to the EMCO SL1200 bar loader. ...and more Machine is available immediately! Redpex E Dncefx Apbou

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Features and technical data: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis CNC controlled, with working length 1300 mm, max. traverse speed 105 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter; drilling depth from 0-35 mm (with drill bit length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in the glue container - 1 pc. left side stop, 1 pc. right side stop, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm Rsdpjy Ih Skjfx Apbju 1 pc. TCT control unit with: Integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensions, automatic workpiece mirroring and process optimization, 4 work fields assignable with different programs, graphic workpiece display, parametric programming, zero-point shifting, programmable job lists, error diagnosis in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with CNC-controlled, dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Traverse speed max. 30 mm/sec. 1 single-spindle vertical drilling unit from above, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, max. drilling depth (Z) 30 mm (with drill bit length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical inclined clamping cylinders 10° with mount, additionally 1 keyboard with mount Availability: by arrangement; currently being overhauled at the Ganner factory Location: Austria

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Rodexzq Ncopfx Apbeu Transport can be organized upon request!

Stanje: rabljeno, Leto izdelave: 2001, Condition: used Year of manufacture: 2001 Stock number: 9647 Delivery time: immediate, subject to prior sale Country of origin: Italy Price: €24,400 Available in stock: 1 Punching force: 30 tons Working area: 1250+N x 1000 mm X-axis travel (with repositioning): 1250 mm Y-axis travel: 1000 mm X-axis speed: 40 m/min Y-axis speed: 30 m/min Combined X+Y speed: 50 m/min Stroke: 30 mm Max. stroke rate (in 1 mm steps, 1 mm sheet thickness): 730 strokes/min Max. stroke rate (in 25 mm steps, 1 mm sheet thickness): 300 strokes/min Table height: 980 mm Motor power: 4 kW Oil tank: 115 l Length: 4000 mm Width: 2780 mm Height: 1900 mm Transport dimensions: 4000 x 2300 x 1900 mm + Z mm Weight: 4800 kg Equipped with MTE6 6-station multi-tool holder (max. diameter 24 mm) 2 clamping claws Table with brushes, table size 1970 x 2260 mm Foot pedal 2 additional single die holders PC with Euromac Eurowin 8.36 software Max. punching force: 300 kN Automatic repositioning up to 10,000 mm Max. punching diameter with single tool: 88.9 mm Max. punching diameter with MTE6 multi-tool holder: diameter 24 mm Max. clamp jaw opening: 7 mm Transport width: 2350 mm Operating manuals in English and Italian CE declaration available INCLUDES LARGE TOOLING PACKAGE Multiple pieces each of the following dimensions: Round: diameter 2.5/2.8/3/3.12/3.2/3.5/3.9/4.1/4/4.5/5/5.2/5.5/6/7/7.5/8/8.5/9/9 .5/10/10.5/11/11.5/12/12.5/13/13.5/14/15/16/18/19/20/21/23 mm Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong slot: 10x6.5/12x8.5/12.2x10.7/18x5 mm BUYING USED MACHINES IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. Rjdpfjwirkgsx Apbou • HONEST INSIGHTS Detailed photos & functional videos of the current condition • ON-SITE LIVE CHECK Live demonstration at our facility • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Leto izdelave: 2024, obratovalne ure: 100 h, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 500 kg, vhodna napetost: 230 V, obratovalni tlak: 6 letvica, vrsta vhodnega toka: Klimatska naprava, številka stroja/vozila: 2K.MA.WPE.241, Used 2-component mixing and dosing system Mur.Tech KMD-3000 V1 (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled potting compounds. Pulsation-free material delivery thanks to eccentric screw pump. Prior to delivery, as the original manufacturer, we carry out a complete factory refurbishment of all material-contacting components: pump, material containers, mixing head, hoses, and valves are rebuilt or renewed. The wear condition of all media-carrying parts thus corresponds to a new system. The frame and sheet metal parts show signs of use consistent with previous operation. Redozabnzjpfx Apbou Highlights: - Factory refurbishment of all media-contacting components before delivery - Modular design: entire delivery chain from pump head to mixing gun can be exchanged without tools (clamp technology) - Material change in minutes – minimal material loss - Stator can be replaced with only 3 screws – service possible without production downtime - Mixing tube can be changed tool-free in seconds - Lightweight, ergonomic mixing head made of carbon/aluminium/GRP - Swivel arm for fatigue-free operation - Mobile thanks to wheeled chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year: 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, continuously adjustable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: static or dynamic possible Operation: gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement throughout the entire material path - Clogging detection - Flow measurement and bubble detection Discharge modes: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on images: The pictures show the system in its current state before factory refurbishment. The material-contacting components will be renewed before delivery. Fields of application: adhesive dosing, electronic potting, specialty chemicals, series production, medical applications. Scope of delivery: system, operating manual, circuit diagrams. Commissioning and training optional. From manufacturer: spare parts supply and service by the original team. Sale as seen, with exclusion of any warranty. Price: on request Location: 8811 Scheifling Viewing on site possible by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Avtomatski rilni stroj Morgana AutoCreaser Pro 33 Odlična priložnost! Po pošteni ceni! Redpjy Uxbpefx Apbju Letvasta rilna za vse digitalne odtise Leto izdelave: 2016 Upravljalni zaslon na dotik Maks. format: 70x33 cm Min. format: 21x14 cm Maks. število ril na list: 16 Maks. zmogljivost: 8.500 A4 listov/uro z enim rilom Dimenzije: 145x52xV125 cm, 120 kg 230V/50Hz

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Mazak, model krmilnika: Mazatrol SmoothAi, Description: General: Year of manufacture: 2023 Control system: Mazak Mazatrol SmoothAi Max. machining diameter: 600 mm Max. machining length: 850 mm Main spindle: Technology: Motor spindle Speed: 6,000 rpm Power: 11 kW Max. torque: 184 Nm Bar capacity: 51 mm C-axis: 0.0001° Chuck: 3-jaw chuck Clamping cylinder: Hollow clamping cylinder Counter spindle: Technology: Motor spindle Speed: 6,000 rpm Power: 11 kW Max. torque: 184 Nm Bar capacity: 51 mm C-axis: 0.0001° Tailstock function: Yes Tool carrier (X/Y/Z/B): Technology: Gantry with milling spindle X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis: -30° / +210° Milling spindle speed: 20,000 rpm Power: 24 kW Tool holder: HSK 63 Tool magazine: Technology: Rack magazine Number of stations: 250 Tool changer: Double gripper Rsdpfsyrvzmsx Apbou Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 15 bar Workpiece measurement: Renishaw RMP 60 Tool measurement: Renishaw tool setter Bar feeder: IRCO ILS-MUK 7012 Finished parts removal: Parts catcher Software option I: 5-axis simultaneous machining Software option II: Synchronous thread cutting Software option III: Cylinder interpolation Software option IV: Tool radius compensation Software option V: Tool length compensation Emulsion mist separator: Mechanical Set-up operation: Electronic handwheel

Stanje: generalkompletno obnovljen (rabljeno), Spodnji in zgornji vrtalni stroj, nagibni, za sedišča stolov tipa Old America ali podobne izdelke št. 4 neodvisne spodnje nagibne skupine št. 2 zgornji navpični nihajni skupini Rodpfeytr Edox Apbou