Kellenberger Cilindrični Brusilni Stroj Cnc nakup rabljenega (36.425)

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 1000 mm Hnjdpfjxy S A Iex Afkst - Center height: 175 mm - Table swiveling angle: 9 degrees - Universal grinding wheelhead spindle - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead orientation: 180 degrees - Spindle speed: 20 – 400 rpm - Spindle internal taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Machine weight: 2500 kg ACCESSORIES - Automatic cycle (roughing, finishing, and return) - Counter centre - Coolant tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 steady rests with two-point contact - 1 steady rest with three-point contact - 1 set of drivers - Various grinding wheel holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Premer brušenja: 80 - 250 mm Dolžina brušenja: 600 mm Višina konic: 175 mm Vzdolžni pomik: 750 mm Obratovalne hitrosti obdelovanca: 6 - 600 min⁻¹ Hitrost brušenja vretena: 1500 - 3600 min⁻¹ Prečni pomik - avtomatsko in ročno: 320 mm Hnodsyb S Rcepfx Afkjt Krmiljenje: Kelco 80 Teža stroja pribl.: 4,4 t Potrebni prostor ca.: 3,1 x 2,1 x 2,0 m

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kellenberger okrogla brusilka v zelo dobrem stanju. Ugodno naprodaj. Cena močno znižana !!!!! Hnodpfx Aow Dy Rqefkot

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Hjdpfx Ast Ii Rfjfkont Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: zelo dobro (rabljeno), Proizvajalec: Ziersch & Baltrusch Tip: URS400 Ergonomy Hsdpfxox Sdx Is Afkont Dolžina brušenja: 400 mm Višina med konicama: 100 mm Premer brušenja: 200 mm Notranji premer brušenja: 8 do 60 mm Globina brušenja: 14 do 60 mm Premer brusnega koluta: mm (ni navedeno) Hitrost brusnega koluta: 1800 / 1970 / 2170 obr/min Hitrost vretena za notranje brušenje: 22.000 / 28.000 obr/min Dodatki/oprema: Naprava za notranje brušenje Priključek: 3 kW Teža: 1,6 t Dimenzije: mm (ni navedeno)

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 125 mm - Table swivel range: -/+ 8° - Universal grinding wheelhead - Left grinding wheel dimensions: 400 x 50 x 127 mm - Main motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead swivel range: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead swivel range: 180° - Workhead spindle speed: 20 - 400 rpm - Workhead internal taper: Morse 5 - Workhead motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions (L x W x H): 2860 x 1680 x 1670 mm - Weight: 2500 kg Hjdpfsuhbx Tjx Afkont EQUIPMENT - Automatic cycle (roughing, finishing, and return) - Counter-center - Sine bar for workhead - Headstock UR: 2 external and 1 internal grinding wheel - Coolant tank with pump - 1 internal grinding spindle SFJ UJ70: 14,000 rpm - Fixed diamond dresser on tailstock - 1 four-jaw chuck - 1 magnetic chuck - 1 set of drive dogs - 2 two-position steadies - Spacer for 175 mm height - Various grinding wheel adapters - Various grinding wheels

Stanje: generalkompletno obnovljen (rabljeno), Machine completely overhauled Hnedpfowhk Uuex Afket With digital display Centre height: 175 mm Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm With internal grinding attachment Various accessories included MARCELS MASCHINEN AG

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6860 0007, Please provide us with your offer price. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain. ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carriers Technical data of the machine: 5-axis grinding center including oval feed belt and loading gantry 12-position tool changer with HSK 63 Maximum travel distance X-axis: 500 mm Hsdpjvbgiiofx Afkont Maximum travel distance Y-axis: 650 mm Maximum travel distance Z-axis: 650 mm Table size: 500 x 650 mm Cut detection Nordmann dressing spindle Oil supply via central factory supply

Stanje: pripravljen za uporabo (rabljen), Na voljo je zunanja cilindrična brusilka Kellenberger. Razdalja med konicama: 1000 mm, višina konice: 175 mm, največji premer obdelovanca: 250 mm, pomik X/Z: 1000 mm/220 mm, premer brusilnega koluta: 500 mm, število vrtljajev: 1530 min⁻¹. Dimenzije stroja X/Y/Z: cca 3000mm/1850mm/1750mm, teža: cca 3150kg. Ogled na lokaciji je možen. Hnodpfxexxzi Ij Afkjt

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Control system: Grinding basic cycles Hedpfx Afouwv H Hjkont - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive - Tailstock with micro adjustment - Fine adjustment on swivel table Hnodpfjt Ii Nbox Afkjt - Paper band filter SBP4, 240l

Stanje: pripravljen za uporabo (rabljen), An older Kellenberger precision cylindrical grinding machine, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, max. workpiece weight: 3 kg, max. workpiece diameter: 245 mm, max. workpiece length: 130 mm. An on-site inspection is possible. Hnsdpfx Ajw Edpgefkot

Stanje: rabljeno, Leto izdelave: 1999, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina med konicama 175 mm Krmiljenje FANUC 18i-TA GENERALNO OBNOVLJENO Fotografija podobnega že dobavljenega stroja - Oprema brusnega kolesa LEVO 500 mm - Oprema brusnega kolesa DESNO 400 mm - Notranja brusilna enota 120 mm za jermensko gnane notranje brusilne vretena (standard) - CNC krmiljenje FANUC 18i-TA Hodpey U N Hpofx Afkont - Pripravljeno za kombinirano merilno krmiljenje Marposs (Minialsar, Positionar) z E5N - B-os - Kel-Set - Hidravlični povrat pinole - Mikro nastavitev na konjičku - Glavna vretena z vrtljivo osnovo

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Studer S30-12 CNC je natančen cilindrični stroj za obdelavo okroglih površin, proizvajalec je podjetje Fritz Studer AG. Znamka: Studer Tip: S30-12 CNC Serijska številka: 1248.74 Dimenzije (dolžina): 3250 mm Hodpfxozn Nqro Afkent Dimenzije (širina): 2000 mm Dimenzije (višina): 1950 mm Hitrost vrtenja vretena: 30 m/s

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit Fanuc 310is Completely mechanically overhauled. Includes grinding process and setup for one part. Original photo of the machine from EMO 2010. CNC control GE Fanuc 310is Hand panel for GE Fanuc CNC control With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel assembly 500 x 80 mm Right grinding wheel assembly 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on workpiece spindle headstock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provisions for external filter Hedpsvdk N Ejfx Afkont Coolant shut-off for table devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provisions for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, CUT 2530S - Variabilný CNC stroj Hnsdpewfdm Eofx Afkjt EPS rezací stroj so 4 nezávisle pohyblivými osami a variabilným pracovným stolom.

Stanje: rabljeno, Technical Details: Grinding length: 300 mm Centre height: 175 mm Swing diameter: 315 mm Clamping surface, table L x W: 1,800 x 200 mm Control: Heidenhain Hsdpfx Afjzaunzjkont Longitudinal adjustment of grinding unit on table max.: 1,100 mm Workpiece spindle speed: 3 steps / 1,500–2,200 rpm Feed stepless: 0.001–1 mm Max. travel x-axis: 300 mm Machine weight approx.: 3.1 t Machine dimensions approx. L x W x H: 2.9 x 1.6 x 1.4 m Swivelling for machining right and left Automatic table reversal Tailstock: MK3 taper Operation: manual control device / foot switch Coolant: system with supply Measuring device: Heidenhain

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31.211.014, višina središča: 225 mm, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, premer brušenja: 500 mm, premer obdelovanca med konicama: 500 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Kellenberger UR 175x1000 CNC Kelco 70, v popolnem delovnem stanju. Povečanje s 175 na 225 (možno povrniti v prvotno stanje). Številka stroja: 31.211.014, leto izdelave: 1987. Priprava za notranje brušenje. Dodatna oprema: 1 x prirobnica za brusilni disk (leva) 1 x prirobnica za brusilni disk (desna) 1 x nosilec za brusilni disk z različnimi nastavki 1 x magnet za obdelovance Hedpfjyyur Iex Afkent 1 x filter za papirnate trakove Brez garancije, jamstva ali možnosti vračila. Na voljo takoj, prevzem na lokaciji. Po potrebi lahko uredimo transport.

Leto izdelave: 2018, stanje: rabljeno, skupna masa: 10.000 kg, skupna dolžina: 2.300 mm, skupna širina: 6.500 mm, skupna višina: 2.400 mm, BUDERUS CNC 235 – CNC obdelovalni stroj za brušenje in obdelavo Obdelava / Vreteno 2 obdelovalna območja / kanala Maks. dolžina obdelave: 150 mm Maks. premer nihanja: Ø 310 mm Število vrtljajev vretena za obdelovanec: 0–3.000 vrt/min Premer vretena: Ø 45 mm Pozicioniranje vretena za obdelovanec preko osi C Hitrost mize X/Z: 0–30 m/min Motorno vreteno WMZ / DVS Tip: GS 205-045/17 Letnik proizvodnje: 2014 Avtomatizacija Avtomatski sistem za dovod obdelovancev / transportni sistem Sistem za hlajenje in filtriranje LIQUI-Filter GmbH Sistem: UR1060 / MW260 / Gamma 13 Prostornina rezervoarja: 2.400 l Letnik proizvodnje: 2015 Hladilni sistem HYFRA gamma 13-F-S Hladilna zmogljivost: 13 kW pri 32 °C Letnik proizvodnje: 2015 Merilna tehnika JENOPTIK merilna tehnika za postopek Letnik proizvodnje: 2018 Podatki o napajanju 3 × 400 V / 50 Hz Nameščena moč: pribl. 45 kW Potreba po stisnjenem zraku: 15 Nm³/h pri 5 bar Dimenzije (D x Š x V) pribl.: 2300 x 6500 x 2400 mm Gib osi X: 1240 mm Nadzorni sistem: Siemens SINUMERIK 840D Gib osi Z: 300 mm Premer obdelovanca na strojni mizi, maks.: 150 mm Hnedpfjzwa Rhex Afkjt Teža pribl.: 10.000 kg Letnik proizvodnje: 2018 Stanje: dobro Način plačila: 100 % predplačilo pred prevzemom Način dostave: Brezplačno natovarjanje na tovornjak Napetost: Ne

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal travel of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – floating: 130 kg incl. clamping Internal spindle fitting: 70 mm Total power requirement: 6.5 kW Hedpfx Afev I Eq Sjkjnt Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Available immediately, supplied with 12-month warranty as standard! Geometrically overhauled and newly painted with new electrics. In KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request At present, the machine tool does not meet the basic safety and health requirements as stated in the German Industrial Safety Regulation (BetrSichV) 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum protection.

Stanje: rabljeno, Leto izdelave: 2000, Grinding length: 800 mm Centre height: 150 mm Control system: FANUC Grinding wheel dimensions (max.): 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Hodpfeu Hag Nox Afkjnt Swivel range: +45° / -15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swivelling range: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed speed: 0 – 7.5 m/min Machine weight: approx. 4.0 t Space requirements (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding Hedpfxjuxfu Ns Afkent - Workpiece...

Stanje: zelo dobro (rabljeno), z notranjo brusilno napravo Višina konic: 125 mm Razdalja med konicama: 1000 mm Velikost mize: 1650 x 145 mm Brusni kolut: 400 x 50 x 127 mm Brusni kolut: 225 x 20 x 76,2 mm Hitrosti brusnih kolutov: 1.500 – 2.200 obr/min Brusilna glava vrtljiva: 270° Razna dodatna oprema Hsdpfx Afsy H Dq Hskjnt MARCELS MASCHINEN AG

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen, središčna višina pri ročični gredi: 200 mm, višina središča: 200 mm, teža obdelovanca (maks.): 100 kg, dolžina brušenja: 1.000 mm, teža obdelovanca med konicami: 100 g, premer obdelovanca med konicama: 400 mm, I am offering this machine here on behalf of a customer in an almost as-new condition. Currently still under power. It is equipped with the following options: Glass linear scales in X and Z Electric door drive Integrated wheel change assistant Fanuc 0i TF Blue Solution HMI Back Solution Basic Black CAM Profile Security Interface Remote diagnostics via mobile network (4G) Grinding head with automatic 1-degree indexing Grinding head UR 1 - 2 - 3 (prepared for HF internal grinding spindle) T 1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning on the head Semi-automatic balancing GAP control Hnodpfx Afew Ed D Rokot A brochure for the K 10 can be provided upon request.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system Hnedpfxouxfuce Afkot - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o