Hladilnik Za Ohlajeno Vodo nakup rabljenega (84.976)

Stanje: novo, *Technical Specifications: - Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C - Supply temperature range: +5°C to +30°C (Optionally, lower temperatures down to -5°C possible) - Air flow rate: 8,000 m³/h - Max. air inlet temperature: +30°C - Optional heating capacity up to 24 kW *Pumps: - Delivery rate up to 150 l/min - Delivery pressure up to max. 4 or 7 bar - Motor power: 1.1 or 2.2 kW *Dimensions: - L/W/H: 1,450 mm x 750 mm x 1,680 mm - Unladen weight: approx. 480 kg - Circulating medium connection: DN 32 internal thread *Details & Highlights: - Internal refrigerant: R 123 a - Power supply: 380-425V/50Hz - Control and regulation unit SBC-T - Setpoint and actual value display, alarm indication - Fully hermetic reciprocating compressor - Refrigerant collector with safety valve according to DIN EN 378 - Capacity control - Frost protection monitoring Hjdsg Ewwrspfx Alaonl - Flow monitoring - Protective grid over condenser - Oil sump heater - Draining device - Level monitoring via float magnetic switch - Installed dirt trap in the return line of the circulating medium - Bypass valve between supply and return for pump protection, set at the factory - High and low pressure limiter according to DIN EN 378 - Stainless steel tank, capacity: 80 litres, open system, fully insulated - Self-supporting chassis with castors, mobile - System designed for indoor installation - Control cabinet: IP 54 Other performance categories available upon request. Visit our website for further details. *This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg Hjdpog Ezarjfx Alasnl 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Millipore Milli-Q pure water system IQ 7000. Without cartridges. Hodpfx Ajwutuqolajnl Includes MilliQ Q-Pod. Unused. Including functional warranty.

Leto izdelave: 2022, stanje: novo, We offer oil coolers designed to reduce cutting oil temperature during operation on CNC lathes. Hjdpfx Aelzghpelaenl The unit is brand new. Temperature range: 5 to 40 °C Flow rate: 40 liters per minute If you have any questions, we are happy to assist you. Did you know? The exhaust air from the cooler can also help reduce heating costs, as the dissipated heat is immediately released into the surrounding environment.

Stanje: nepreverjeno (rabljeno), Type: IIRR210LG //20 30411 Hodpfx Alsh A Hxuoaenl Device Number: 882510304 Capacity: 125 litres Internal Dimensions: 450 x 450 x 450 mm 2 compartments Temperature: Refrigerant: R600a Equipment: Ex nA nC nL IIB T6II 3G explosion-proof mobile Connection: Weight: 50 kg Dimensions: 600 x 670 x 930 mm

Leto izdelave: 2025, stanje: novo, Izkoristite naše hidravlične module z integriranim zalogovnikom – popolna rešitev za sodobne sistem hladne vode. Centralni zalogovnik omogoča stabilno delovanje sistema, zmanjšanje tlačnih nihanj in izboljšano razpoložljivost vaše naprave. Primer izvedbe: Hjdpfehtfhajx Alasnl Hidravlični modul s 5000-litrskim zalogovnikom Integrirana dvojna črpalka za redundantno delovanje ali povečano kapaciteto pretoka Hidravlično ločevanje med primarnim in sekundarnim krogom Natančen nadzor tlaka in temperature za optimizacijo skupne učinkovitosti Prostorsko varčna zasnova ohišja za enostavno integracijo v obstoječi proces. Z veseljem vam pripravimo individualno ponudbo z dimenzioniranjem in dobavnim rokom.

Stanje: rabljeno, Leto izdelave: 1900, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 6.600 m³/h, končni tlak: 2,5 letvica, moč: 610 kW (829,37 KM), vhodna napetost: 6.600 V, vhodni tok: 69 A, vrsta vhodnega toka: Klimatska naprava, 2 kosa črpalk za hladilno vodo. Vertikalna cevna črpalka z odprtim spiralnim kolescem Proizvajalec: KSB Tip: SEZ N 8-60 Oblika kolesa: odprto spiralno Število kolesc: 1 Potopna globina: 2550 mm Tesnilo gredi: drsno obročasto tesnilo Radialni ležaj: RESIDUR vlaknasta keramika Nosilni ležaj: segmentni drsni ležaj Hlajenje: lastno hlajenje, CuNiFe hladilnik Število obratov: 745 / 600 / 496 vrt/min Pretok: 6600 / 5750 / 4750 m³/h Dvižna višina: 25 / 15,5 / 10,5 metra Moč na gredi: 525 kW / 280 kW / 180 kW Učinkovitost črpalke: 85,7 % Temperatura medija: 20°C NPSH: 8,0 m Ohišje: S235JRG2 Gred: 1.4313 Hjdpfx Aexb Tvxolasnl Koleso: 1.4409 Premer kolesa: 766/571 mm Elektromotor: Siemens 1LA44548 AW94Z Moč: 610 kW Napetost: 6600 V Tok: 69 A Vključno s frekvenčnim pretvornikom Mere: Tlačni priključek: DN 800 Tlačna stopnja: PN 10 Teža črpalke brez motorja: 4100 kg Dolžina z motorjem: 7723 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Naprava za proizvodnjo ultra čiste vode PODROBNOSTI O STROJU Krmilna plošča: TP177B PN/DP Color OPREMA Hedpfx Alow Nn Itoajnl Načrti Navodila

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B500-1091-05 / 705-05, obratovalna temperatura: 110 °C, kapaciteta rezervoarja za vodo: 1.500 l, Oprema: dokumentacija / priročnik, TEHNIČNI PODATKI Kapaciteta: 400 l/h Prostornina: 1.500 dm³ PODROBNOSTI O STROJU Delovni tlak: -0,025 bar / +0,49 bar Delovna temperatura: 0/110 °C Hnjdpfxjw Nn Sls Alajl OPREMA Z rezervoarjem Cevovodi Krmilna omarica Navodila za uporabo

Stanje: generalkompletno obnovljen (rabljeno), 60 m³ / 60,000 L Firefighting Water Tank According to DIN 14230 Tank volume: 60,000 litres / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, grade S 235 JRG 2 Underground tank for subterranean storage, single- or double-walled, suitable for pedestrian and drive-over areas (load class SLW 30) with 1 manhole (external diameter 720 mm), equipped with blank cover, gasket and bolts. Available immediately either new or used! The tank is emptied, cleaned, refurbished and professionally leak-tested by our certified workshop. The tank complies with the requirements of DIN 14230 (Underground Firefighting Water Tank): - Firefighting water suction connection in accordance with DIN 14244, fitted with a fire brigade coupling / fixed coupling type A as per DIN 14319, design type B, without level gauge - Ventilation flange nozzle NWN 100 with cap, overall length approx. 1,300 mm, suitable for 800 mm underground coverage and 500 mm above ground - Exterior protected by bitumen coating - Upon request, we can provide an internal full lining with bitumen-based or epoxy resin coating (for corrosion protection) - It is also possible to fit the tank with an internal plastic liner Cost-effective delivery with our own truck is available. Simply provide your delivery location and you will immediately receive the exact freight costs. Inspection by appointment is possible at any time. If you need further information, please call us or send an e-mail to b.barth(at)barth-tank.de We also accept trade-ins and purchase tanks/containers of all kinds. Please contact us for details. We always have tanks of similar types in stock in the following sizes: Hnsdpfshh Sruox Alajl - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: generalkompletno obnovljen (rabljeno), Firefighting Water Tank according to DIN 14230 (Underground Firefighting Water Tank): 100,000-litre firefighting water tank for underground storage, single-walled, equipped with 1 manway DN 600 complete with blank cover, gasket and bolts. External surface with bitumen insulation - used - Hjdpfsfn Rddox Alajnl Tank volume: 120,000 litres / 120 m³ Length: approx. 16,500 mm Diameter: approx. 3,100 mm Weight: approx. 3,100 kg Material: Steel, grade S 235 JRG 2 The tank is fitted with a firefighting water suction connection in accordance with DIN 14244, including a pre-installed Storz fire brigade coupling (A type) according to DIN 14319, design type B, without dip tube. Additionally, the tank is equipped with a vent flange (NW/DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground level. - The tank has been emptied, cleaned, and given a bitumen exterior coating in our workshop. On request, we can fit the tank with a full interior coating based on bitumen (for corrosion protection) or with an epoxy resin interior coating. Affordable delivery with our own truck can be offered. Please share the delivery address and we will promptly provide the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please do not hesitate to call us or email us at b.barth(at)barth-tank.de. We also accept trade-ins and purchase used tanks/containers – feel free to contact us for details. We always stock similar tanks in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000, 100,000 litres

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Hnsdpfx Alefnh Tgoasl Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: generalkompletno obnovljen (rabljeno), The following firefighting water tank complies with the requirements of DIN 14230 (underground firefighting water storage): 100,000 litre water tank – firefighting water tank – underground storage tank for below-ground installation, single- or double-walled, equipped with 1 DN 600 manway (inspection hatch) with blank cover including seal and bolts, external bitumen insulation – used – Tank volume: 100,000 litres / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 11,600 kg Material: steel grade S 235 JRG 2 The tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling type A according to DIN 14319, design type B, without dip tube. In addition, the tank has a vent flange outlet NW/DN 100 with cap, overall length approx. 1,300 mm, suitable for 800 mm earth coverage and extending 500 mm above ground. - The tank is drained, cleaned and has been factory-coated on the outside with bitumen by us - On request, the tank can be fitted with a full internal bitumen-based lining (for corrosion protection) or an epoxy resin internal coating Hnsdpfx Aled E S U Seaol - It is also possible to line the inside of the tank with a plastic liner Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive a precise freight quote. Inspection is possible at any time by prior appointment. If you require further information, simply call us or send an email to s.barth (a) barth-tank.de. Part exchange and the purchase of tanks/containers is possible – just contact us with your offer. We always have such tanks available in the following sizes as well: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Leto izdelave: 2001, stanje: rabljeno, Tank & Environmental Protection Wozniack – Certified Specialist Company under the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 25,000-liter storage tank for the storage of water and wastewater, as detailed below. The tank is a 30 cbm steel storage tank. Material: S235JRG2 steel. Including manufacturer's certificate as per DIN standards and type plate. The tank is internally cleaned and externally coated with bitumen. Suitable for both underground and above-ground installation. Tank dimensions: Length: approx. 8,390 mm Diameter: approx. 2,000 mm Weight: approx. 4,500 kg Shape: Cylindrical Fittings: On request For use as a fire water reservoir, a suction line with A-type fixed coupling according to DIN can additionally be offered. Hedpfx Aec Nkyzelajnl Of course, you can also participate in the configuration of your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. Inspection of our tanks is possible at any time. Additional storage tanks for both above-ground and underground use are available in all sizes and can be viewed on our premises. Have we convinced you with our offer? If you have any questions or special requests, simply give us a call—one of our experienced employees will be happy to assist you. General information: All offers are ex location Warstein, loaded free of charge. Delivery can be arranged at an additional cost. Delivery time: immediate You will receive an invoice with VAT shown separately. In addition, we purchase existing tank systems and, as a certified specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them for you. Best regards from Warstein, Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Leto izdelave: 2000, stanje: rabljeno, Tank & Environmental Protection Wozniack Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We are offering a 30,000-liter storage tank for the storage of water and wastewater as described below. This is a 30 cbm storage tank made of steel. Hedpfec Nkznex Alajnl Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standards and type plate. The tank is cleaned on the inside and bitumen-coated on the outside. Suitable for both underground and above-ground storage. Tank dimensions: Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 14,000 kg Shape: cylindrical Equipment: upon request For use as a fire water tank, a suction line with A-storz coupling according to DIN can be offered additionally. Of course, you can also participate in the tank system design! All our systems undergo thorough inspection and testing by our carefully selected staff. Affordable delivery can be offered upon request. Inspection of our systems is possible at any time. We have a wide range of tanks for both above-ground and underground storage in all sizes available for sale at our premises. Have we convinced you with our offer? If you have any questions or wishes, just give us a call; one of our experienced staff will be happy to advise you. General Information: All offers are ex-works Warstein, loaded free of charge. Delivery can be offered at low cost for an additional charge. Delivery time: immediate You will receive an invoice with VAT shown separately. Furthermore, we purchase existing tank systems and, as a certified specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Best regards from Warstein Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Leto izdelave: 1995, stanje: rabljeno, Tank & Environmental Protection Wozniack – Certified Specialist Company under the German Water Resources Act (WHG) Dear Sir or Madam, We offer a 50,000-litre storage tank for the storage of water and wastewater as follows. This is a 30 m³ (cubic metre) storage tank made of steel, material grade S235JRG2. Including manufacturer’s certificate (DIN) and type plate. The tank has been cleaned internally and externally coated with bitumen insulation. Suitable for both underground and above-ground storage. Hsdoc Nkzgopfx Alajnl Tank dimensions: Length: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Shape: cylindrical Equipment: as required For use as a fire water tank, a suction line with Type A fixed coupling (DIN standard) can also be offered. You may, of course, also customise your tank system with us! All our systems are thoroughly inspected and checked by selected, qualified personnel in our company. We also offer cost-effective delivery upon request. Inspection of our tanks is possible at any time. Further tanks for above-ground and underground storage in all sizes are available and can be viewed for sale at our premises. Are you interested in our offer? If you have any questions or special requirements, just give us a call—one of our experienced team members will be happy to advise you. General information: All offers are ex works Warstein, loaded free of charge. Delivery can be provided at low cost for an additional fee. Delivery time: immediate. You will receive an invoice with VAT shown separately. In addition, we purchase existing tank systems and, as a certified specialist company under the Water Resources Act (WHG), can empty, clean, dismantle and remove them professionally. Best regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: LWT , Tank & Environmental Protection Wozniack – Specialized Company in Accordance with the Water Resources Act (WHG) Dear Sir or Madam, We are offering a 20,000-liter storage tank for the storage of water and wastewater as follows. This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Including manufacturer's certificate according to DIN and nameplate. The tank is internally cleaned and externally insulated with bitumen. Suitable for both underground and aboveground installation. Tank dimensions: Length: approx. 6,400 mm Diameter: approx. 2,000 mm Weight: approx. 4,000 kg Shape: cylindrical Equipment: on request Hjdpfx Aloc Nkyvoasnl For use as a fire water tank, an additional suction line with an A fixed coupling according to DIN can be installed upon request. Of course, you can also participate in configuring your tank system! All our tanks are thoroughly inspected and checked by selected employees in our company. We can also offer cost-effective delivery upon request. Inspection of our tanks is possible at any time. Further tanks for aboveground as well as underground storage in all sizes are available and for sale at our premises. Have we convinced you with our offer? If you have any questions or requests, simply call us – one of our experienced staff will be happy to advise you. General Information: All offers are ex works Warstein, loaded free onto truck. Delivery can be offered at reasonable extra cost. Delivery time: immediate You will receive an invoice with VAT shown separately. Furthermore, we purchase existing tank systems and, as a certified specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle and remove these systems. Best regards from Warstein, Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100, Suitable for use as a fire water tank, fire water reservoir, fire water retention tank, stormwater retention tank, cistern, water tank, etc. 100,000 liter underground tank for storage of rainwater, service water, fire water, etc. Dimensions: Diameter = 2.90 m – Length = approx. 16.00 m The tank features a manway DN 600 with dome cover, is used, internally emptied and professionally cleaned, and externally coated with a bitumen layer/bitumen insulation. Minor insulation damage from removal and transport may be present on the tank. Hnedpfx Asctzy Relael Price ex location Söhrewald – loaded free of charge – Delivery can be offered at low cost. General information: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and can empty, clean, dismantle, and remove them professionally with certified expertise according to the German Water Resources Act (WHG).

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device Hnedpsivdvcjfx Alaol 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control all year round + Rapid swelling when mixing without ice + Fluffier doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and dosing unit + Water-carrying components are made of stainless steel and require no cleaning + Hygienically perfect, clean drinking water Langheinz ice water systems are characterized by: + Consistently low water temperatures + Powerful refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controllers + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in ice water bath + High flow performance + Compact dimensions + Easy-care surface finish + Low energy consumption SPECIAL Accessories, optionally available at extra charge: - Stainless steel wall bracket (for model L60 + L100): + €319 net - Machine table (for model L100): + €389 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters / hr - Peak cooling capacity*: 180 liters / hr - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Electrical connection: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 950 x 530 x 560 mm (L x W x H) - Net weight: 60 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device 12 months warranty Benefits of chilled ice water: + Consistently low filling water temperatures + Precise dough temperature control all year round + Rapid hydration during mixing without ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and dosing unit + Water-carrying parts made of stainless steel – maintenance-free Hedpfx Aoivdvkjlajnl + Hygienically perfect, clean drinking water Langheinz ice water units are characterized by: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller + Stainless steel refrigeration evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available for a surcharge: - Stainless steel wall bracket (for models L130 + L170): + €499 net - Machine table (for models L130 + L170): + €589 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters / hr - Peak cooling capacity*: 230 liters / hr - Ice bank: 30 kg - Cooling output (CECOMAF): 1.189 kW - Electrical connection: 230 V - 50Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet