Hidrobrasil Stiskalnica Za Betonske Plošče nakup rabljenega (83.043)

Stanje: rabljeno, številka stroja/vozila: 008382, Maksimalna obdelovalna širina: 800 mm Maksimalna obdelovalna dolžina: 2800 mm Maksimalna obdelovalna višina: 1320 mm Djdpfx Aceywadwj Noch Maksimalna hitrost podajanja: 40 m/min

Stanje: rabljeno, Leto izdelave: 2009, NC krmiljen avtomat za okroglo upogibanje Schröder-Fasti tip 114 Leto izdelave: 2009 Stanje: rabljeno, kot novo Razstavni stroj Delovnih ur: < 50 ur Tehnični podatki 10/1,0 10/1,5 Uporabna dolžina (mm): 1080 1080 Debelina pločevine (400 N/mm²): 1,0 1,5 Premer valjev (mm): 68 80 Moč motorja (kW): 8,2 8,2 Teža (kg): 1780 Standardna oprema: - Upravljanje CR80 na vrtljivem panelu, pozicioniranje zadnjega valja, frekvenčno krmiljeno - Valji, cca 700 N/mm² natezne trdnosti - Pogon treh valjev - Hidravlično nastavljanje prijemnega valja - Hidravlično nastavljanje spodnjega valja - Samodejno odpiranje ležišča zgornjega valja - Nožno stikalo - Električna varnostna kontrola Dodatna oprema: Dsdey Twfqepfx Ac Noch - Valji kaljeni in brušeni, premer valjev 68/80 mm - Izmetalec cevi - Hidravlična podpora za velike cevi

Stanje: zelo dobro (rabljeno), skupna dolžina: 3.000 mm, skupna širina: 1.500 mm, Stiskalnica za plošče v zelo dobrem delovnem stanju + finger jointing Grecon Dsdpfx Acst Uduxe Njch

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, RBB – Leto 2017 Polavtomatski skladiščni regal Dedpfx Aey T Enmjc Nsch Jumbo 17 pozicij - 1 fiksni voziček, 400 mm platforma - 16 mobilnih vozičkov, 250 mm platforma Hod bata: 900 mm 380 V 50 Hz Skupne dimenzije: 7300 x 6400 mm

Stanje: rabljeno, Leto izdelave: 1992, Rabljeni stroj Leto izdelave: 1992 Premer žaginega lista: 290-300 mm Število vrtljajev žaginega lista: 4750 vrt/min Dcjdpfxey Dkg Nj Ac Noh Moč motorja: 4,5/5,5 kW Število vrtljajev motorja: 2880 vrt/min Maks. širina reza: 5300 mm Maks. višina reza: 2100 mm Maks. višina plošče: 2200 mm Maks. debelina obdelave: 80 mm Nosilec za majhne dele: Da Transportne dimenzije pribl. 7000 x 2000 x 2600 mm Teža pribl. 1000 kg Razpoložljivost: takoj Lokacija: Röllbach

Stanje: novo, Zasukalni voziček za plošče nov primeren za formatno krožno žago s pritisno letvijo Fimal Concept 350 popoln, vključno s 4 vrtljivimi kolesi (2 z zavoro) Dedsw I U A Iepfx Ac Noch 12 večsmernih valjev in preklopna podporna miza Razpoložljivost: hitro dobavljivo Skladišče: Hochheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, največja višina reza: 2.200 mm, največja širina rezanja: 4.100 mm, premer žaginega lista: 250 mm, vrsta nastavitve višine: pnevmatičen, vrsta aktuacije: pnevmatičen, skupna dolžina: 4.100 mm, skupna višina: 2.200 mm, skupna masa: 700 kg, Oprema: CE označba, dozator, We are offering this very well-maintained Holzkraft VPS 2241 VR ED vertical panel saw, year of manufacture 2022. The machine was installed and commissioned in May 2023. Holzkraft VPS 2241 VR ED – vertical panel saw (Commissioned in 2023, excellent condition) The machine is connected and can be demonstrated under power. I am selling my Holzkraft VPS 2241 VR ED vertical panel saw, purchased new and set up in 2023, so the condition is correspondingly very good. Sale is due to business expansion. — Features & Highlights • Scoring unit for clean, splinter-free cuts • Digital measurement displays (horizontal & vertical) • Panel positioning on movable rollers (no lifting required) • Pneumatic locking of the saw carriage • Changeover between vertical / horizontal cutting • Sturdy, torsion-resistant machine frame • Integrated extraction system for direct connection to dust collector Dodsyxv T Ropfx Ac Njch Machine is running perfectly, no defects — Technical Specifications • Cutting length: 4100 mm • Cutting height: 2200 mm • Cutting depth: 60 mm • Saw blade: Ø 250 mm • Motor: 3 kW / 400 V • Weight: approx. 700 kg — Condition • Year of manufacture: 2022 / Commissioned: 2023 • Lightly used • Ready for immediate operation If you have any questions or require further information, please feel free to send us a message or call us. —

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 364, Maszyna do produkcji rożków do lodów, producent COMACO Alimentare, model UNIRUS UR2, rok produkcji: 2018, numer seryjny: 364, pobór prądu 25A; zasilanie 380V, zużycie energii 9 kW, częstotliwość: 50/60 Hz; maszyna posiada formę z 2 rzędami, po 7 gniazd w każdym rzędzie, łączna liczba gniazd w formie to 14. Maksymalna średnica rożka mierzona w mm wynosi 80. Średnia wydajność produkcyjna przy cyklu 2 minuty i temperaturze 45°C to 420 rożków. Średnia wydajność produkcyjna przy cyklu 1 minuta i temperaturze 45°C to 480 rożków. Dcsdsx Dzifepfx Ac Njh Półautomatyczna maszyna z wymiennymi formami do produkcji rożków do lodów. Maszyna wykonuje kubki i podwójne rożki o różnych rozmiarach i pojemnościach. Formy otwiera i zamyka się ręcznie. Napełnianie form odbywa się poprzez specjalne urządzenie podające. Podgrzewanie realizowane jest przez zasilanie elektryczne 380V. Rożki są automatycznie wyrzucane do pojemnika na dole maszyny po uruchomieniu dolnej formy. Kontrola temperatury jest automatyczna: maszyna utrzymuje zadaną temperaturę aż do momentu, gdy sygnał (wizualny i dźwiękowy) wskazuje zakończenie procesu wypieku. Cena: 11.400 Euro + VAT, do negocjacji; warunki Incoterms 2025, FCA, Oradea/Rumunia Zastrzega się możliwość pomyłek, zmian oraz wcześniejszej sprzedaży.

Stanje: rabljeno, Nagibno žagin list 45° Dolžina vozička ~2.900 mm Širina reza 1.250 mm Dodpfxsy Umfps Ac Noch Moč motorja 5,5 kW Maksimalna višina reza 155 mm Maksimalni premer žaginega lista 450 mm Formatna krožna žaga Altendorf tip F45 za natančno razrezovanje masivnega lesa, ploščatih materialov in materialov s prevlekami z nagibnim žaginim listom. Stroj omogoča natančne vzdolžne, prečne in poševne reze ter je zasnovan za vsakodnevno uporabo v profesionalni obdelavi lesa.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Lisec plinska polnilna stiskalnica za maksimalne dimenzije elementov 3500 x 2500 mm, leto izdelave 2001, sestavljena iz: Dcsdpfoy Swfzsx Ac Njh - RTVN-15/25ST, podaljšek za merilno cono, tip z jermenom, leto izdelave 2001 - RTVN-15/25MZ, merilna cona za plinsko polnilno stiskalnico, tip z jermenom, z merjenjem dolžine in višine ter merjenjem debeline stekla in okvirja, leto izdelave 2001 - FPS-36/25U2T, polnilna stiskalnica za argon, nastavitev pritisnih plošč preko vreten, možna tudi polnitev modelov, na stroju se lahko obdelujejo tudi 4-stranski stopničasti elementi (spodaj 50 mm, spredaj, zgoraj in zadaj 130 mm), leto izdelave 2001 - RTVN-15/25ST, izhodni transportni trak stiskalnice, tip z valji, leto izdelave 2001 Stroj je v brezhibnem delovnem stanju in si ga je po dogovoru mogoče ogledati v našem skladišču strojev.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 15,4 kW (20,94 KM), hod: 360 mm, širina mize: 1.100 mm, dolžina mize: 2.500 mm, skupna dolžina: 2.900 mm, skupna širina: 1.300 mm, skupna višina: 1.900 mm, skupna masa: 3.200 kg, leto zadnje generalne obnove: 2015, Ponujamo to zelo dobro furnirsko stiskalnico Joos HP 65, leto izdelave ni znano. Dsdpfxjy U Tw Ee Ac Njch Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2023, Display Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY GUARDS: MORE WORKING SPACE FLOATING CLAMPS: GUARANTEED PERFECT CUTTING TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Number of standard clamps 5 Number of clamps for versions 33/38/43 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz RPM 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING UNIT Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz RPM 5850 Scoring blade diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power kW 12÷15 Machine voltage Euro voltage (400 V / 50 hz) Compressed air requirement NL/min 300 Required air pressure bar 7 Extraction air flow rate m3/h 2440 Extraction air speed m/sec 20 Extraction nozzle diameter mm 4x120 () Note: For countries where EC directives apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel saw with PC/PLC control, for cutting panels from solid wood, MDF, chipboard, plywood and similar materials. Machine frame and working table - Machine frame constructed from steel tubing - Working table made of ribbed, reinforced steel with bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of - one motor for the main saw blade and one for the scoring blade - Vertical lift of saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure optimum cutting quality - Travel direction against the longitudinal fence - Saw carriage drive by rack and pinion - Carriage guidance on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year warranty), protected by special dust wipers - Pneumatic switch for quick and safe main/blade changingPressure beam - Pressure beam applies even pressure to the workpiece over the entire cut length with cutouts to avoid collisions with the clamps; pneumatic height adjustment on high-precision racks and pinions, pressure adjustable 1.5-6 bar - Dual extraction system with a unit above the pressure beam for cleaning the worktable and one below on the saw carriage – Side automatic aligner with pneumatic cylinder along the entire length. Slide on linear ball bearing guides and shoes. * Travel distance: 1200 mm * Minimum working width: 60 mm * Maximum working width: 1200 mmPositioning pusher and rear part of the machine - Positioning pusher along the entire length driven by robust shaft. Positioning pusher movem... Dedpfx Aox Twcvec Noch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 110 789, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, - Lamelna korpusna stiskalnica Dodoy Uxzvepfx Ac Njch - Delovno območje: - Širina od 150 do 2.500 mm, višina od 150 do 1.400 mm; globina 700 mm; - Moč je nastavljiva = 1000/1500/1800 daN (kg) - Timer = samodejno odpiranje po preteku nastavljenega časa - Teža: ca. 1800 kg - Zelo dobro stanje, vse deluje - Možen preizkus delovanja

Stanje: rabljeno, Leto izdelave: 2001, Použitý stroj Rok výroby: 2001 Oprema in tehnični podatki: - Dolžina reza: 4300 mm - Višina reza vertikalno: 2150 mm, horizontalno: 2100 mm - Največja globina reza: 60 mm - Premer žaginega lista: 250 mm; pritrdilna odprtina: 30 mm - Motor: 4 kW - Obrati: 5100 obr/min - Nosilna površina z valji za material - Fiksni nosilni elementi za varno stabilnost obdelovancev Dsdpfx Acoxvnpce Noch - Srednja nosilna točka: stabilni nosilni elementi v delovni višini, posamezno ročno zložljivi - Odčitavanje mer: - horizontalni rezi prek lestvice - horizontalni rezi prek dolžinskega prislona 50–500 mm - vertikalni rezi prek prislona 0–1300 mm - Priklop na zračni tlak za pnevmatsko pomični letveni ležišče (potreben tlak: 6 bar) - Predrezovalni sistem: z dvojnim rezom glavnega žaginega lista; globina potopa žaginega lista je omejena s preprostim premikom prislona, tako da žagin list v enakomernem gibanju predreza obdelovanec Razpoložljivost: kratkoročno Lokacija skladišča: Röllbach

Stanje: rabljeno, Tehnične podrobnosti: Dolžina stebla: maks. 30 mm Zmogljivost: 600 kos/min Največji premer žice: 5 mm Delovno območje: 30 mm Dimenzije krmilne omarice DxŠxV: 1,45x0,55x2,1 m Dimenzije stroja: 2,95x1,5x2,15 m Dimenzije odvijalnika: 1,15x1,15x1,15 m Mehanska stiskalnica za hladno preoblikovanje Dodpfxju Nfrco Ac Noch Za proizvodnjo zakovic, verižnih zatičev, zatičev ali posebnih izdelkov. (BREZ VIJAKOV po navedbah proizvajalca) Naprava je posebna izvedba in neuporabljena (kot nova). Pribor: - odvijalnik - navodila za uporabo Stroj je možno prikazati v obratovanju. i.D.

Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm Odpiralna širina: 300 mm Število etaž: 1 kos Djdpfxey Ty E Te Ac Nsch Teža stroja ca. 3 t Leto izdelave: neznano

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C Dcjdjd Nm Siepfx Ac Noh - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates Dcodpjgl Nlmofx Ac Njh + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje. Dcjdpjv Rpxljfx Ac Neh

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable) Dedpfx Acschqxxo Nsch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Dcjdpfxefci D Ae Ac Njh Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Dcsdpfx Acsgfm Ryo Noh Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Dedet Hxudepfx Ac Nsch Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: Djdpsxfwdofx Ac Njch - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo Dcedpsw Ig Suefx Ac Neh - Oljni hladilnik