Friul Co Srl M44/700. nakup rabljenega (34.997)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h for the compaction and formation of bales of soft waste materials, such as glass wool mats or similar. The MG 50 T.E. model features a fully enclosed compaction chamber; both the material loading door and bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and comes with a 10 m extension cable, allowing it to be positioned away from the baler. The press plate is operated by a single cylinder with a 2700 mm stroke and is guided by 4 lateral sliding rails. Material is loaded from the front. The compaction cycle (downward and upward movement of the press) is automatic, operated by push button. - For transport, the machine is constructed in three sections: one of 2000 mm height, one around 2300 mm, and the cylinder, which will be assembled onsite. - Bale tying is preset-type, performed with the doors open, and is done manually; tying can be done with standard pre-cut wire or strapping through slots at the rear of the chamber. - Bale extraction is carried out using a forklift; dedicated channels at the base allow the forklift tines to be inserted. - The bale extraction door is closed via a handwheel, ensuring safe opening even with highly elastic materials; a microswitch ensures the door is securely closed before pressing. The upper door is equipped with a hydraulic lever closure with controls on the machine. - Can be installed against a wall; requires front access only for material loading and bale extraction. - The hydraulic circuit features a safety lock valve to prevent press plate descent. - The machine must be fixed to the ground and is positioned over a wash liquid collection tray. • Manufacturer / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Material pressing pressure: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Pressing chamber: 1200 x 1100 x 3500 mm • Loading opening: 1200 x 1800 mm • Ram stroke: 2700 mm, single extension • Operation: Automatic, push button • Cycle time (automatic): 130 seconds • Manual ties: 5 • Bale ejection: Removed with forklift • Hydraulic unit: Integrated in press • Motor power: 10 Hp (7.5 kW) • Supply voltage: 380V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm • Noise level: 78 dB Fgjdpfxeyzr Nmo Aplsb • Press weight: approx. 5000 kg • Certification: CE Condition: • Used vertical hydraulic baler, in excellent condition, sold as seen and approved.

Stanje: novo, Leto izdelave: 2024, dolžina transportnega traku: 2.000 mm, širina transportnega traku: 350 mm, hitrost transportnega traku: 33 mm/s, skupna dolžina: 2.050 mm, skupna širina: 450 mm, skupna višina: 500 mm, skupna masa: 50 kg, izpraznilna višina: 500 mm, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, NP 2000 - U 350 O 76 mod.NP (BLADE SEPARATOR) STANDARD FRAME Profile type: STANDARD FRAME Drive roller diameter 76 STANDARD Bottom flat part length 2000 Usable width 350(l Real width345) Charge height esterne-300-500mm Belt type BLACK PVC ROUGH FINISH BELT LATERAL MOTOR Motor Kw 0.18 4P B14 400V TRIFASE 50 Hz 400V THREE-PHASE \ RIGHT SIDE Gear box RMI40P 1/100 63 B14 ( 3.3 mt/min ) LOAD HOPPER 700 X 550 X H. 200mm Fsdpfx Apjyym Izslegb GALVANIZED STEEL SUPPORT support type RUOTE \ WHEELS Control unit INTERRUTTORE START/STOP CONTROL UNIT ON/OFF + EMERGENCY BUTTON 400V THREE-PHASE 50 HZ ON LEFT SIDE

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Ponujamo rabljeni EMproject89 MS 1700 TWOCOL, letnik 2020. Fodpfx Apeyz T H Hjlsgb Tip stroja: MS 1700 TWOCOL Serijska številka: 24/2020 Leto izdelave: 11/2020 Napetost: 220 V Nazivna moč: 1,5 kW Za fleksotisk, tisk na karton, valovito lepenko, embalažo Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: skoraj kot novo (rabljeno), Dimenzije komore: 280 x 180 x 500 mm (gornja) Fedped Sm Dijfx Aplogb 280 x 130 x 450 mm (donja) Maksimalna temperatura: 700 °C

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ST2100-001, skupna masa: 450 kg, Leto izdelave: 2021, STEMA GLF avtomat za vbijanje moznikov Zagotovo najbolj produktiven avtomat za vbijanje močnih in dolgih moznikov. Prednastavljen za moznike 80 x 8 mm, kot je pogosto uporabljeno v proizvodnji oken. Podrobnejši opis najdete v priloženem PDF-ju. Fgjdpfxexhv A Ie Apljb Stroj je na naši razstavni površini in je pripravljen za predstavitev.

Stanje: novo, Leto izdelave: 2026, NDS 2 • Konstrukcija iz aluminijastih profilov • Nastavljiv kot/nagib • Dolžina poševnega dela: 1300 mm • Uporabna širina: 350 mm • Nakladalna dolžina: 600 mm • Separirna dolžina: 800 mm • Minimalna višina (H min): 600 mm • Maksimalna višina (H max): 1000 mm Fjdpfxowktn Ao Aplsgb • Vključen separator z lopaticami

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) Fodpfx Asng Exaeplsgb • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. Fedpfx Aondn Agjplogb The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available Fgodpfenh R Ekox Aplsb • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder Fsdpfx Aonfvx Nepljgb • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation Fjdpfx Apjndk N Aolsgb • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room Fsdsng Amkjpfx Aplegb • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: Fjdpfx Aong A R Ssplegb • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D Fgedenfvy Uepfx Aplob • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° Fodpsng Ax Sefx Aplsgb • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: OM2339002, moč: 750 kW (1.019,72 KM), vrtljajska hitrost (min.): 745 obr/min, vhodna napetost: 5.000 V, vhodna frekvenca: 50 Hz, vhodni tok: 112 A, vrsta vhodnega toka: trifazni, skupna masa: 8.800 kg, skupna dolžina: 3.200 mm, skupna širina: 1.700 mm, vrtilni moment: 9.614 Nm, vrsta hlajenja: zrak, vrsta zaščite (IP koda): IP5K5, 2 kos srednjenapetostnih trifaznih asinhronskih motorjev 5000V, možno prodati tudi posamezno. Lokacija: 44866 Bochum. Ogled in poskusni zagon možni po dogovoru. Fgedsy N N Szepfx Aplsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide Fgodpsyz Af Ejfx Aplsb - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), skupna masa: 13.500 kg, Vecoplan V-eco 1700 Rotor pribl. 1700 mm Premer rotorja pribl. 500 mm Motor 1x 132 kW Število vrtljajev rotorja nastavljivo pribl. 100-300 obr/min. Krmilna omarica s frekvenčnikom + hladilni sistem. Teža pribl. 13,5 t Vecoplan je deloval zelo kratek čas v proizvodnji. Komplet vsebuje: Osnova drobilnika vložni lijak električna omarica Fgsdpsy D T Ipjfx Aplob Dodatni komplet rezervnih delov vsebuje: Nova rezila/protirezila/ležišča. dodatni rezervni motor paleta dodatnih perforiranih sit. Popolna navodila za uporabo Rotor ima nameščena vsa nova rezila (180 kosov, 40/40) in nova protirezila. Rotor in stroj sta trenutno zaščitena za čas mirovanja.

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Fedpehx Elfofx Apljgb Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Fodpfx Apju Tha Islegb Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Fodpfxju Thh Es Aplogb Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Fgsdpfjx A U Ncsx Apljb Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: skoraj kot novo (rabljeno), Pakirna linija za skrčljive vrečke Linijo sestavljajo: Vakuumski pakirni stroj MULTIVAC C 700 Mere komore (D x Š x V): 1060x440x200 mm Mere stroja (D x Š x V): 1270x850x1150 mm Dolžina varilne letev: 1 x 1060 mm Cikel stroja: 15-40 sek. Napetost: 400 V-3-50 Hz Moč: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Avtomatska platforma s transportnim trakom Digitalno upravljanje temperature Fgodjy Iv Iaspfx Aplsb Ohišje iz nerjavečega jekla Največja nosilnost: 30 kg Globina potopa: 200 mm Čas potopa: 3-5 sekund (nastavljiv) Cikel: 22 sekund Poraba stisnjenega zraka: 50 l/min pri 6 bar Samodejno krmiljen dotok vode Odtok vode Avtomatska kontrola nivoja vode Vgrajena zaščita tehtnice Časovni preklopnik za predgrevanje vode

Stanje: novo, Priložnost: stekleni moduli iz švicarske razgradnje, 96 steklenih modulov Fgedpfxjyxth So Apleb

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 15.000 h, številka stroja/vozila: M312, Technical specifications and performance data This used monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functionalities into a compact rotary system designed for professional beverage production. The machine is equipped with a dual capsule applicator with rotating heads for precise capsule fitting, as well as three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting premium wines and can be integrated into an existing bottling line or used as a standalone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer and Dryer Year: 2010 Configuration: Drying module + dual capsule applicator with rolling head + 3 self-adhesive labeling stations (front/back/neck) Bottle formats: Compatible with Bordeaux and Burgundy bottles Label application: Pressure-sensitive (self-adhesive) for front, back, and neck Container type: Glass bottles Format examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling operations Advanced automation and control systems Fodpfx Apjygh I Ujlsgb The monoblock is designed for synchronized operation of the drying, encapsulation, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The dual rollhead capping stations guarantee consistent finishing quality for wine capsulation. Quick mechanical adjustments support switching between Bordeaux and Burgundy bottles, enhancing production flexibility in existing filling lines. Production line integration capability Designed for inline operation, the unit connects upstream to fillers and capping/closure machines and downstream to inspection and packaging equipment. It adapts to standard conveyor logistics, allowing smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine condition and maintenance history The machine has undergone a thorough overhaul including purchase, transport, and recommissioning, resulting in a fully functional and reliable used item. It is ready for deployment in a production environment and suitable for rapid integration into an existing bottling line. Performance and versatility Optimized for glass wine bottles, the monoblock combines drying, precise rollhead capsule application, and three-point pressure-sensitive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking uniform presentation quality in an industrial packaging setting. Installation requirements and site preparation The compact footprint of the rotary machine allows easy placement in standard filling rooms. Connection to existing conveyors and...