Flow Kent Mach 2 C nakup rabljenega (109.922)

Stanje: pripravljen za uporabo (rabljen), * Znamka: Allis Chalmers Fodpfx Aoywl S Hjplsgb * Površina: 4000 x 1200 mm - 2 podesti

Stanje: pripravljen za uporabo (rabljen), * Znamka: Främbs & Freudenberg * Površina: 4000 x 1400 mm – 2 nadstropji Fjdpfx Ajywl Syeplegb

Stanje: pripravljen za uporabo (rabljen), * Znamka: Gfa * Površina: 4200 x 1600 mm – 2 nivoja Fjdpfxsywl Smj Aplegb

Stanje: pripravljen za uporabo (rabljen), * Znamka: IBAG Fgjdpeywl Sasfx Aplsb * Površina: 4500 x 1500 mm – 2 nivoja

Stanje: pripravljen za uporabo (rabljen), * Znamka: Siebtechnik * Tip: HG * Površina: 3000 x 1200 mm - 2 palubi * Vključuje: 11 kW motor. Fgjdpfxjywl Rpo Aplob

Stanje: pripravljen za uporabo (rabljen), * Znamka: Svedala * Površina: 6000 x 1600 mm - 2 nivoja * Pogon: elektromotor 18,5 kW * Vključno z: vzmetnimi nosilci in novimi vzmetmi. Fgedpfxoywl Rij Apleb

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, barva: siv, Leto izdelave: 2020, Nosilnost: 2.518 kg Skupna masa: 982 kg Tehnično stanje: zelo dobro Optično stanje: zelo dobro Prednje pnevmatike: 13 Zadnje pnevmatike: 13 Država proizvodnje: NL Za več informacij kontaktirajte Vink Machinery. Hapert Indigo LF2 Fedoyxdiyepfx Aplegb * Leto izdelave: 2020 * Notranje mere: 4,1 x 1,64 x 0,23 metra * Nosilnost: 2.518 kg * Visokotlačne pnevmatike

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 586.317 km, prva registracija: 01/1994, vrsta goriva: dizel, gorivo: dizel, barva: drugo, Leto izdelave: 1994, Oprema: žerjav, = Additional Options and Accessories = - PTO shaft Fgjdpsymp D Defx Apleb = Notes = YV2F5A6G1RA221657 = Further Information = Empty weight: 30,520 kg Payload: 1,480 kg Gross vehicle weight: 32,000 kg Crane: GROMACH Technical condition: very good Visual condition: very good Registration number: BKW025 = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the given information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber). MOB: Dutch (Available on WhatsApp and Viber). When paying by bank transfer, the funds must be transferred to our bank account below. Always verify the payment details on our website. If you receive different payment information, please contact us. If you have any doubts, please call us so that we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta laserja: vlakenski laser, laserska moč: 6.000 W, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Maksimalna dolžina cevi: Fsdpfxow I In Rj Aplogb

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 184.731 km, moč: 324 kW (440,52 KM), prva registracija: 01/2021, vrsta goriva: dizel, medosna razdalja: 5.600 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 500 l, barva: črn, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.600 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 2021, Oprema: AdBlue, = Further options and accessories = - PTO (Power Take-Off) = Further information = Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 13,230 kg Payload: 12,770 kg Gross vehicle weight (GVW): 26,000 kg Body manufacturer: CVIM FRANCE LOW-LOADER/MACHINE TRANSPORTER/PLATFORM Loading platform height: 120 cm Technical condition: very good Optical condition: very good RENAULT C 440 DTI 6X2 LOW-LOADER / MACHINE TRANSPORTER / PLATFORM EURO 6 | L PACKAGE | 440 HP DRIVE: 6X2 | LIFTING AND STEERABLE REAR AXLE Wheelbase: 560 cm Air suspension Differential lock Day cab | Full options: air conditioning, navigation Automatic transmission Small trailer hitch Fedpfx Apeyk Du Eslegb Loading platform with hydraulically operated rear end with hydraulically extendable ramps Length: 960 cm Floor height: approx. 120 cm Lashing eyes Large, hydraulically adjustable ramps Large winch with radio control 2x rear supports Toolboxes Complete body operable with remote control Follow us on Instagram, Facebook, and TikTok to see videos of our trucks, commercial vehicles, and machines offered for sale. We speak German We speak English Hablamos Espanol

Stanje: pripravljen za uporabo (rabljen), AFC AFC-04 Advanced Flow Control AB, SN:273. On one connector socket, the plastic coating is damaged (see photo). Used condition with normal signs of wear. Fully functional (100%). Scope of delivery as per photos. Fgodpferv Npmsx Apljb

Stanje: pripravljen za uporabo (rabljen), Siemens SITRANS F C MASSFLOW MASS 2100, Part No.: 083L2551, flow meter, serial number: 200271N284, used, standard signs of use, 100% functional, scope of delivery as shown in the photos. Fgedpsxahutjfx Apleb

Stanje: pripravljen za uporabo (rabljen), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN: 287171N094, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. Fjdpjxahuysfx Apljgb

Stanje: pripravljen za uporabo (rabljen), AFC AFC-04 Advanced Flow Control AB, kataloška št. 12375, serijska št. 257, rabljeno, manjše sledi uporabe, 100% delujoče, dobava kot na fotografijah. Fgodsx Eqp Tepfx Aplsb

Stanje: pripravljen za uporabo (rabljen), AFC AFC-04 Advanced Flow Control AB SN:266, rabljeno, običajne sledi uporabe, 100 % funkcionalno, dobava po slikah. Fsdpfx Apsx Eqqqolegb

Leto izdelave: 2020, stanje: skoraj kot novo (rabljeno), Ponujamo to avtomatsko napravo za izdelavo medicinskih mask tipa IIR in FFP2. Znamka: BBCAMCNC AUTOMATIC FACE MASK MACHINE 1+2, stanje kot novo, leto izdelave 2020. Vključno z določeno količino surovin. Če imate kakršnakoli vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Fgjdpfx Asykpm Tsplsb

Stanje: zelo dobro (rabljeno), Weiss Type: WK11-1000/40 For sale is a professional climate test chamber Weiss Umwelttechnik WT-WK 1000/40, equipped with a fully automatic cold-regenerating adsorption dryer. The installed components currently in the test compartment can be removed if required. At present, due to these installations, the switch cabinet is limited to an operating temperature range of −40°C to +60°C. After dismantling these components, the manufacturer can extend the temperature range back to the standard values of −40°C to +180°C, as the existing installations are not suitable for these high temperatures. The unit is suitable for precise temperature and humidity testing on components, assemblies, and devices. Ideal for applications in industry, development, quality assurance, and research. Fsdpfx Apjx Hxkzjlsgb Weiss climate test chamber, water-cooled Specifications for temperature testing: - Temperature range: -40°C to +60°C - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Specifications for climate testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% r.H. - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temporal humidity fluctuation at workspace center: ±1 to ±3% r.H. Heat compensation: - Within +25°C to +95°C - At relative humidity up to 90%: 500 W Humidification system specifications: - Reservoir volume: 20 liters - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 µS/cm³ - Water consumption: - At constant +40°C, 92% r.H.: 21/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber interior dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Exterior dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data remain reserved!) Feel free to contact us by phone for any further questions.

Stanje: novo, Leto izdelave: 2025, Kovinsko stroj za robljenje HR-2 Kovinski stroj za robljenje HR-2 je naslednji model v proizvodni liniji za modelom stroj za robljenje HR-1. Medtem ko lahko model HR-1 oblikuje zavihke širine 5–8 mm, lahko kovinski stroj za robljenje HR-2 izdela zavihke širine 6–14 mm. Tako imajo kupci možnost izdelave širšega spektra izdelkov glede na potrebe, saj sedem profilirnih postaj stroja to omogoča. Fgodsrklxvspfx Apljb Kovinski stroj za robljenje HR-2 močno poenostavi standardna dela pri obdelavi pločevine, zagotavlja boljšo kakovost in enako ponovljivost izdelave. Pri klasični izdelavi je treba ta postopek izvesti z ročnim upogibnim strojem za pločevino, zato morata dva delavca postopoma upogibati vsak zavoj posebej, da izdelata potreben izdelek. Stroj za robljenje HR-2 omogoča, da te postopke izvedete veliko učinkoviteje. Možno je hkrati robiti obe strani ali pa postopno vsako stran posebej. Postopno robljenje je dobra rešitev, ko imate široko paleto izdelkov z različnimi širinami, saj ni potrebe po ponastavitvi širine stroja za vsako operacijo. Za izdelavo valjev stroja uporabljamo posebno orodno jeklo, kar omogoča dolgo življenjsko dobo. Rollformer HR-2 omogoča izdelavo panelov poljubne dolžine in močno olajša delo uporabnika. Z našim strojem za robljenje HR-2 lahko tako prihranite veliko časa in občutno izboljšate učinkovitost vašega proizvodnega procesa.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2014, Kornit Breeze – Geeignet für Ersatzteile. Druckköpfe defekt. Fragen und weitere Fotos auf Anfrage. Fedpfx Apjiqn R Rslsgb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, OKUMA V-Turn LVT 400 CNC vertikalni stružnica (dvo-strojna celica) Model: LVT 400 Krmiljenje: OKUMA OSP 1000L Letnik: 2006 Fedpexwy S Ejfx Aplogb Revolver za 12 orodij Hi-Power 60 bar visokotlačno hlajenje Transporter odrezkov Merjenje obdelovanca Karuselni sistem, ki povezuje obe stroji s preklopno postajo

Stanje: rabljeno, številka stroja/vozila: 005934, Maks. širina panela: 2200 mm Maks. dolžina panela: 4200 mm Maks. višina sklada panelov nad tlemi: 1000 mm Dvižna zmogljivost: 200 kg Fjdey Nkw Sepfx Apljgb Sistem gibanja: z vakuumskimi prijemali

Stanje: rabljeno, Leto izdelave: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum suction pads: 6 / 2 standard type Standard end stops / position: 1 / rear Fgedpeyymz Usfx Apleb Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles std./number/speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles std./number/speed rpm: 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power std. / opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Tool changer, traveling with the support in X: 4 positions, pneumatic INSTALLATION Installed power KVA: 23–28.5 Compressed air requirement Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction port diameter mm: 150+150 (200) Machine weight kg: 3000 * X Distance between stops – Y cutter center as reference; Z workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in frame design with work table equipped with adjustable workpiece supports and vacuum suction pads, suitable for: - Vertical drilling on the panel surface - Horizontal drilling on all four panel sides - Groove milling with disc cutter in the X direction - General milling operations Self-supporting structure and work table: Steel welded frame construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or optionally different support carriers. Box-type construction made from cold-rolled steel with internal reinforcement ribs, protective covers with component group consisting of a drilling head with vertical and horizontal spindles, integrated grooving and saw unit, and an SCM electrospindle with quick-change tool system type HSK 63 F. Travel paths of the portal and support carrier: Movement in the X, Y, and Z axes takes place on linear prismatic recirculating ball guides with preloaded bearings. Movement transmission of the X-axis (moving stand) is via a preloaded, backlash-free rack-and-pinion drive with helical gears. Movement of the support carrier in Y and Z directions is via preloaded ball screws. Positioning of the working units and machine functions is managed by "brushless" AC servomotors and digital drives. CNC CONTROL UNIT The control unit consists of a numerical control for milling and drilling machines and a connected PC with a graphical user interface "XILOG PLUS". - PC-Office operating system Windows XP - Color LCD screen 17" - QWERTY keyboard - Swivelling control panel - Machine interface software Xilog Plus Xilog Plus features: Programming - Parametric, graphical and ISO programming - Import of DXF and ASCII files - Straight line or circular interpolation in three axes, linear in space, spiral on the chosen plane - Assisted programming with graphical and syntax help for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on inclined or curved panel edges - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional features - Calculator for direct data transfer - S

Stanje: rabljeno, Leto izdelave: 2009, Max. workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Model: Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamp tables, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Processing of workpieces exceeding 2,700 mm in length is carried out using a repositioning cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from HSK 63F reference surface: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot spacing: 100 mm Fixed multi-spindle drilling head ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex-location Prices for Dismantling and loading onto customer’s truck Transport within Germany and abroad as well as reassembly Fjdpfewunwyex Apljgb commissioning and, if required, new profiles available on request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88 in- and outward opening, with fitted weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner joints: mortise/tenon & dowel Technical data as per manufacturer – no guarantee! Detailed technical description available on request!

Stanje: novo, Siemens Simatic S7 6ES7138-4FC01-0AB0 PROFIsafe Serijska številka: C-ANTU9001, verzija E: 2, nerabljeno v odprti originalni embalaži, 100 % delujoče, obseg dobave po slikah. Fgsdpfxey Nr Tue Apljb

Stanje: pripravljen za uporabo (rabljen), Rexroth MAC071B-0-TS-3-C / 095-A-2 / S001 motor s permanentnim magnetom MNR: R911241380, serijska št.: MAC071-92272, rabljen, močne sledi uporabe, 100% delujoč, dobava po slikah. Fgodpfx Aoi D Nfqoplob