Ergoplus 4 M nakup rabljenega (99.852)

Stanje: rabljeno, Leto izdelave: 2025, nosilnost: 3.000 kg, dvižna višina: 5.020 mm, skupna dolžina: 4.640 mm, · Operator type: Seated · Load center: 500 mm · Load distance, center of drive axle to fork: 747 mm · Front axle load (laden) / Rear axle load (laden): 7,490 kg / 1,475 kg · Front axle load (unladen) / Rear axle load (unladen): 2,155 kg / 3,810 kg · Front track width: 1,520 mm · Rear wheel spacing: 1,630 mm · Seat height: 1,426 mm · Fork carriage DIN 15173 A/B 3A · Aisle width for 1000 x 1200 mm pallet (crosswise): 6,180 mm · Aisle width for 800 x 1200 mm pallet (lengthwise): 6,180 mm · Turning radius: 4,030 mm · Travel speed (laden / unladen): 10 km/h / 22 km/h · Lifting speed (laden / unladen): 0.60 m/s / 0.60 m/s · Lowering speed (laden / unladen): 0.40 m/s / 0.40 m/s · Traction force / Traction force (unladen): 6,290 daN / 4,250 daN Hsdpfeyb Tqqjx Al Dju · Parking brake: Hydraulic · Manufacturer / Engine model / Emission standard: Deutz / TCD 2.9 / Stage V · Engine output according to ISO 1585: 65 kW · Rated speed: 2,300 rpm · Number of cylinders / Displacement: 4 - 2,925 cm³ · Auxiliary hydraulic circuit working pressure for attachments: 185 bar · Oil flow for attachment: 97 l/min · Noise level at operator's ear according to DIN 12 053: 78 dB

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 3.182 h, nosilnost: 1.600 kg, dvižna višina: 4.400 mm, prosto dvigovanje: 1.500 mm, vrsta goriva: plin, tip droga: triplex, gradbena višina: 2.100 mm, moč: 30 kW (40,79 KM), vrsta pogona: Treibgas, Plinski viličar Težišče tovora: 500 Tip droga: triplex Stanje: pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Vrsta pnevmatik spredaj: superelastične Vrsta pnevmatik zadaj: superelastične Hodpjz Hg D Dsfx Al Dsu Opis: Stranski pomik, 3. ventil, delovna luč zadaj, delovna luč spredaj, polkabin,a

Stanje: rabljeno, Leto izdelave: 2025, nosilnost: 3.000 kg, dvižna višina: 5.550 mm, skupna dolžina: 4.800 mm, Terenski viličar Manitou M 30-4 Pogonsko gorivo: dizel Letnik izdelave: 2025 Višina dviga (mm): 5.550 Hjdpfx Aljztgabo Deu Nosilnost (kg): 3.000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 725 h, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: triplex, moč: 54 kW (73,42 KM), proizvajalec motorjev: Perkins, skupna višina: 2.690 mm, skupna dolžina: 3.500 mm, skupna širina: 1.930 mm, barva: drugo, Oprema: pogon na vsa štiri kolesa, Splošne informacije Letnik izdelave: februar 2024 Registrska tablica: T-93-GBJ Tehnične informacije Število valjev: 4 Prostornina motorja: 2.925 cm³ Lastna teža: 5.965 kg Medosna razdalja: 200 cm Funkcionalnost Nosilnost: 3.000 kg Označba CE: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro = Dodatne možnosti in oprema = - 3. hidravlični krog - 4. hidravlični krog - delovna luč(i) - bočni pomik = Opombe = Pogonski sistem Stopnja (Tier): Stopnja V / Tier IV final Hodpfxszxbggj Al Dsu Splošno Država proizvajalca: Francija Stanje Tip CE: CE 1800 mm širok nosilec vilic, bočni pomik, 4. hidravlična funkcija, prosti triplex stolpec, nizozemska registrska tablica

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 346 h, nosilnost: 1.800 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.660 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.175 mm, širina nosilnega okvirja vilic: 970 mm, dolžina vilic: 1.200 mm, lastna masa: 3.670 kg, skupna dolžina: 2.250 mm, vrsta pogona: Elektro, gradbena širina: 1.110 mm, Električni viličar z 4 kolesi Težišče tovorja: 500 Širina vilic: 100 mm Hodpfezzgq Njx Al Dsu Debelina vilic: 35 mm Razred ISO: ISO razred 2 = 1.000 – 2.500 kg Tip dvigala: Triplex Tehnično stanje: zelo dobro Sprednje pnevmatike, tip: Polno gumijaste Sprednje pnevmatike, velikost: 6.50-10 (5.00) Sprednje pnevmatike, stanje: 80–100 % Zadnje pnevmatike, tip: Polno gumijaste Zadnje pnevmatike, velikost: 16x6-8 (4.33) Zadnje pnevmatike, stanje: 80–100 % Napetost baterije: 48 V Kapaciteta baterije: 480 Ah Proizvajalec baterije: Heli Tip baterije: PzS Letnik izdelave baterije: 2024 Stanje baterije: Nova 3. ventil, 4. ventil, polna kabina, zaščitno ograjno mrežo za tovor, certifikat CE, varnostna luč, vzmeteno sedalo.

Stanje: rabljeno, Leto izdelave: 2025, nosilnost: 3.000 kg, dvižna višina: 5.535 mm, skupna dolžina: 4.800 mm, Terenski viličar Manitou M 30-4 Pogon: dizelski Letnik: 2025 Hsdpfeztgahsx Al Deu Višina dviga (mm): 5.535 Nosilnost (kg): 3.000

Stanje: rabljeno, Leto izdelave: 2025, nosilnost: 3.000 kg, dvižna višina: 5.020 mm, skupna dolžina: 4.800 mm, · Operator type: Seated · Load center: 500 mm Hodjztgmbopfx Al Dju · Load distance, center of drive axle to fork: 747 mm · Front axle load (laden) / Rear axle load (laden): 7,490 kg / 1,475 kg · Front axle load (unladen) / Rear axle load (unladen): 2,155 kg / 3,810 kg · Front track width: 1,520 mm · Rear wheel spacing: 1,630 mm · Seat height: 1,426 mm · Fork carriage DIN 15173 A/B 3A · Aisle width for 1000 x 1200 mm pallet (crosswise): 6,180 mm · Aisle width for 800 x 1200 mm pallet (lengthwise): 6,180 mm · Turning radius: 4,030 mm · Travel speed (laden / unladen): 10 km/h / 22 km/h · Lifting speed (laden / unladen): 0.60 m/s / 0.60 m/s · Lowering speed (laden / unladen): 0.40 m/s / 0.40 m/s · Traction force / Traction force (unladen): 6,290 daN / 4,250 daN · Parking brake: Hydraulic · Manufacturer / Engine model / Emission standard: Deutz / TCD 2.9 / Stage V · Engine output according to ISO 1585: 65 kW · Rated speed: 2,300 rpm · Number of cylinders / Displacement: 4 - 2,925 cm³ · Auxiliary hydraulic circuit working pressure for attachments: 185 bar · Oil flow for attachment: 97 l/min · Noise level at operator's ear according to DIN 12 053: 78 dB

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 253.000 mm, obremenitev na par nosilcev (maks.): 2.000 kg, nosilnost na odsek shranjevanja: 2.000 kg, število vrst polic: 10, višina police: 7.500 mm, višina okvirja: 7.500 mm, dolžina police: 25.300 mm, dolžina opore: 2.700 mm, 10 rows of pallet racks (10 x M75112711-4) Each 25.3 m long, 7.5 m high, 1.1 m deep, Each with 9 bays, 2.7 m wide, Each with 4 beam levels, compartment load capacity 2,000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, assembly bolts - 400 floor anchors (ZZBA1210) - 720 individual beams (T27114 - RAL2008) - 2 impact protections / rack guards (ZRS40901) - 4 side guards (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load capacity signs (BSMcP) Hsdev Uqwdspfx Al Deu Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivery to construction/Montage site free of charge - Unloading from the truck is the responsibility of the buyer, using own lifting equipment - Deliveries made throughout the entire territory of the Federal Republic of Germany; except islands! Deliveries to EU countries subject to individual arrangements.

Stanje: rabljeno, Leto izdelave: 2025, nosilnost: 5.000 kg, dvižna višina: 3.980 mm, Operator type: Seated - Max. lifting capacity: 5,000 kg - Load center: 600 mm Hjdpfoy E Uhgex Al Dou - Load distance, center of drive axle to fork: 773 mm - Front axle load (laden) / rear axle load (laden): 11,520 kg / 1,805 kg - Front axle load (unladen) / rear axle load (unladen): 3,285 kg / 5,040 kg - Tyres: Pneumatic - Number of front wheels / rear wheels: 2 / 2 - Number of drive wheels: 4 - Front track width: 1,620 mm - Rear track width: 1,740 mm - Overhead guard height (cabin) / overall height with low driver protection (buggy version): 2,486 mm / 2,486 mm - Seat height: 1,455 mm - Fork carriage DIN 15173 A/B 4A - Aisle width for pallet 1000 x 1200 across: 6,812 mm - Aisle width for pallet 800 x 1200 lengthways: 6,812 mm - Turning radius: 4,640 mm - Travel speed (laden / unladen): 10 km/h / 22 km/h - Lifting speed (laden / unladen): 0.40 m/s / 0.40 m/s - Lowering speed (laden / unladen): 0.50 m/s / 0.40 m/s - Parking brake: Hydraulic - Rated output combustion engine: 55 kW - Manufacturer / Engine model / Emission standard: Deutz / TCD 2.9 / Stage V - Rated speed: 2,300 rpm - Number of cylinders / displacement: 4 – 2,925 cm³ - Auxiliary hydraulic circuit pressure for attachments: 230 bar - Oil flow for attachments: 97 l/min - Noise level at driver’s ear according to DIN 12 053: 78 dB

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) Hsdpfx Asd Tqaljl Dou - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, nosilnost: 4.000 kg, Manufacturer: KONE Note: MK10L1 Year of manufacture: 1986 Span: 9.3 m Payload capacity: 4 t Lifting height: 6.3 m Wired remote control Net weight: 2,550 kg Additional dimensions can be found in the photos. Hjdpfxoumt Irj Al Dou

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. Hsdpfjd Tbbdjx Al Dsu The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: dober (rabljeno), Popolna linija za lupljenje čebule, ki obsega: Hedpjzzpu Djfx Al Deu - Naprava za lupljenje čebule, proizvajalec M&P Engineering, model MP 16584. Velika naprava za lupljenje čebule podjetja M&P Engineering odstranjuje zgornji in spodnji del ter lupi čebule s premerom od 45 mm do 115 mm, pri čemer uporablja samonastavljive gibljive sklope nožev, ki se lahko nastavijo v obsegu do 25 mm za vsako posamezno nastavitev. Nato čebulo vodoravno prereže od vrha do dna, globina reza pa je odvisna od kakovosti in razreda čebule. Naprava na koncu odstrani lupino s pomočjo stisnjenega zraka, kar zagotavlja končni izdelek z optimalnim videzom. - Nakladalnik Dolav - Dvignjeni transporter - Valjasta miza - Naprava za pranje čebule

Stanje: rabljeno, Leto izdelave: 2007, Labotek sušilnik za suho zračno obdelavo DDM 4/60, 60 litrov + transportni sistem + mešalni sistem Letnik: 2007 Cena: 3.950,00 € Hsdpfx Aoz Hx Axsl Dou Kontaktna oseba: gospod Rainer Eckerle

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Hsdpfsguk Dvsx Al Dou - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: rabljeno, prevoženi kilometri: 713.000 km, moč: 243 kW (330,39 KM), prva registracija: 03/2012, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 5, dolžina tovornega prostora: 8.733 mm, širina tovornega prostora: 2.445 mm, višina nakladalnega prostora: 2.550 mm, Leto izdelave: 2012, Oprema: ABS, klimatska naprava, Proizvajalec: Volvo Model: FM 330 6x2, stranska odprtina, 8,7 m Letnik: 2012 Stanje: Dobro Serijska številka: YV2J1D1C0CA725961 Referenčna številka: 328174 Datum registracije: Motor: 11-litrski, Euro 5 SCR, 330 KM, 1600 Nm Konjske moči: 330 Prevoženi kilometri: 713000 Menjalnik: I-Shift Euro tip: 5 Dizelski rezervoar: 1 Prostornina rezervoarja: 330 L Hjdezv A Erepfx Al Deu Kamera za vzvratno vožnjo: ? Klimatska naprava: ? Število ležišč: 1 Vrsta kabine: Globetrotter Radio: ? Diskovne zavore: ? ABS: ? Motorna zavora: ? Velikost pnevmatik: 385/55R22,5 - 315/70R22,5 - 315/70R22,5 Sprednje vzmetenje: Parabolno Zadnje vzmetenje: Zračno Medosna razdalja: 6000 mm Skupna masa: 26000 kg Lastna masa: 12390 kg Nosilnost: 13610 kg Notranja dolžina: 8733 mm Notranja širina: 2445 mm Notranja višina: 2550 mm Blagovna znamka dvigala: Zepro Nosilnost dvigala: 2000 kg Daljinski upravljalnik: ?

Stanje: rabljeno, prevoženi kilometri: 332.000 km, moč: 346 kW (470,43 KM), prva registracija: 03/2013, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: > 3 osi, vrsta prenosa: polavtomatski, Leto izdelave: 2013, Oprema: ABS, elektronski program stabilnosti (ESP), parkirni grelec, žerjav, RENAULT KERAX 460 – ODKRITI TOVORNI AVTO Z ŽERJAVOM – 8 X 4 – STRANSKE OGRADE – ŽERJAV 10,2 M – Z VILICAMI – * ZGODOVINA VOZILA * NA ZAHTEVO NA VOLJO VIDEO * TAKOJ PRIPRAVLJEN ZA UPORABO / ŽERJAV IN TOVORNI AVTO * VOZILO IMA FRANCOSKO DOKUMENTACIJO OPREMA VOZILA * AVTOMATSKI MENJALNIK * MOTORNI ZAVOR * TEMPOMAT * ZAKLEPANJE DIFERENCIALA * KAMERA ZA VOŽNJO V ZADNJEM SMERU * LISTNE VZMETI * HMF ŽERJAV Z VILICAMI * TIPO ŽERJAVA: 2200-K3, LETNIK: 2013 * DOLŽINA 10,2 M * ŽERJAV UPRAVLJAN Z ROČNIM IN RADIJSKIM DALJINSKIM UPRAVLJALNIKOM (RADIJSKI DALJINSKI UPRAVLJALNIK NI NA VOLJO) * DOLŽINA 7 M * ŠIRINA 2,48 M * VIŠINA STRANSKE OGRADE 1 M * ODKRITA PLATFORMA IMA KOVINSKO TALNO OBLOŽENJE * 1 X REZERVOAR * DOVOLJENA SKUPNA TEŽA: 32.000 KG * PRAZNA TEŽA: 16.360 KG Hedszw Sb Espfx Al Deu * NOSILNOST: 15.640 KG * VELIKOST PLATIŠČ: 12R22,5 * DOBRE PLATIŠČA * IZVOZ: PRODAJA SAMO Z VARŠČINO (DEPOZITOM) MIN. 500 € – 2000 € * IZVOZ: PRODAJA SAMO Z VARŠČINO (DEPOZITOM) MIN. 500 € – 2000 € * IZVOZNA PRIJAVA CARINA EXW V 10 MIN. (POOBLAŠČEN IZVAŽAČ) 5 DNI, 15 DNI, 30 DNI, REGISTRACIJSKE ŠČITKE IN 15 DNI AVSTRIJSKE REGISTRACIJSKE ŠČITKE, EURO 1, TEHNIČNI PODATKOVNI LIST. * REZERVACIJE VOZIL SPROTIJTE SAMO PREKO FUNKCIJE E-POŠTE. USTNE REZERVACIJE VELJAJO. * ZA PRODAJO V EU IN DRUGE DRŽAVE SE ZARAČUNA VARŠČINA V VIŠINI MINIMALNO 500,00 € / 1.000,00 €. * PRIDRŽUJEMO SI PRAVICO DO SPREMEMB, NAPAK IN PREDPRODAJE! * DODATNA VOZILA NAJDETE NA NAŠI SPLETNI STRANI. PRODAJA SE IZVAJA IZKLJUČNO PO NAŠIH SPLOŠNIH POGOJIH – GLEJTE SPLETNO STRAN. * POMEMBNO OPOZORILO – POMEMBNA INFORMACIJA: KOT PRAVILO IZVAJAMO NATANČNO PREVERJANJE VSEH PODROBNOSTI V NAŠI PONUDBI, VENDAR SE LAHKO VZROK ZA NAPAKE POJAVIJO. NEKATERE SO POVZROČENE S PRENOSNOSTJO PODATKOV V SISTEMIH RAZLIČNIH PONUDBNIKOV PLATFORM. ZATO ŽELIMO OPOMNITI, DA SO VSE NAVEDENE INFORMACIJE BREZ GARANCIJE IN NE USTVARJAJO PRAVNEGA ZAHTEVKA. * PRAVNO: TA OGLEŠ NI PONUDBA V SMISLU ČLENA 145 BGB. RAZMERJENJE BO INFORMACIJA ZA ZAČETEK POGAJANJ. TUKAJ NAVEDENE INFORMACIJE SO BREZ GARANCIJE IN ZATO NE USTVARJAJO GARANTIRANIH LASTNOSTI.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, obratovalne ure: 12.931 h, nosilnost: 2.000 kg, dvižna višina: 4.000 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 2.600 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION Hsdpfxey Rm Rwe Al Deu WE ARE HERE FOR YOU. WITH DEDICATION, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers, thoroughly serviced, tested, and fully refurbished by us in accordance with FEM 4.004 (UVV) regulations. - Over 350 vehicles in stock - Custom modifications of any kind upon customer request possible - International transport with suitable vehicles and customs clearance available upon request - See for yourself and visit us at our facility Friedmann Forklifts – Our Quality Promise - Full operational safety in compliance with FEM 4.004 - Serviced & tested batteries (C5 test) on electric units (minimum 70% capacity)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 4.750 h, nosilnost: 3.000 kg, dvižna višina: 4.400 mm, prosto dvigovanje: 1.350 mm, vrsta goriva: plin, tip droga: triplex, gradbena višina: 2.180 mm, moč: 37 kW (50,31 KM), dolžina vilic: 1.150 mm, vrsta pogona: Treibgas, Viličar na plin Položaj težišča tovora: 500 Tip nosilca: Triplex Menjalnik: hidravlični menjalnik Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: zelo dobro Sprednje pnevmatike, tip: Superelastik Zadnje pnevmatike, tip: Superelastik Hedez Hg Ipepfx Al Dsu Opis: Stranski premik, 3. ventil, 4. ventil, delovna luč zadaj, delovna luč spredaj, strešna zaščita, popolnoma prosto dviganje, certifikat CE, LED.

Stanje: rabljeno, Leto izdelave: 2025, nosilnost: 5.000 kg, dvižna višina: 3.980 mm, Operator type: Seated - Max. lifting capacity: 5,000 kg - Load center: 600 mm - Load distance, center of drive axle to fork: 773 mm - Front axle load (laden) / rear axle load (laden): 11,520 kg / 1,805 kg - Front axle load (unladen) / rear axle load (unladen): 3,285 kg / 5,040 kg - Tyres: Pneumatic - Number of front wheels / rear wheels: 2 / 2 - Number of drive wheels: 4 - Front track width: 1,620 mm - Rear track width: 1,740 mm - Overhead guard height (cabin) / overall height with low driver protection (buggy version): 2,486 mm / 2,486 mm - Seat height: 1,455 mm - Fork carriage DIN 15173 A/B 4A - Aisle width for pallet 1000 x 1200 across: 6,812 mm - Aisle width for pallet 800 x 1200 lengthways: 6,812 mm - Turning radius: 4,640 mm - Travel speed (laden / unladen): 10 km/h / 22 km/h - Lifting speed (laden / unladen): 0.40 m/s / 0.40 m/s - Lowering speed (laden / unladen): 0.50 m/s / 0.40 m/s - Parking brake: Hydraulic - Rated output combustion engine: 55 kW - Manufacturer / Engine model / Emission standard: Deutz / TCD 2.9 / Stage V - Rated speed: 2,300 rpm Hsdpfxey E Ucwe Al Dsu - Number of cylinders / displacement: 4 – 2,925 cm³ - Auxiliary hydraulic circuit pressure for attachments: 230 bar - Oil flow for attachments: 97 l/min - Noise level at driver’s ear according to DIN 12 053: 78 dB

Stanje: rabljeno, OKK HM 4 je horizontalni obdelovalni center z visoko natančnostjo, točnostjo in zanesljivostjo. Delo: miza 400×400 mm, hodi X560 Y510 Z560 mm; obdelovanci do 620×620×700 mm, nosilnost mize 400 kg. Glavni podatki: vreteno ISO40 100–12.000 min⁻¹ (brezstopenjsko), največji navor 150 Nm, pomik 1–40 m/min, hitri pomik 40 m/min, razdalja vreteno-miza 150–710 mm; mere stroja D2100׊3995×V2884 mm. Oprema: zalogovnik orodij 60 mest, Ø orodja 82 mm (140 mm ob prostih sosednjih mestih), dolžina 300 mm, masa 8 kg, menjava orodja 1 s, chip‑to‑chip 3,4 s, samodejni menjalnik palet (2), 8 palet, hladilna tekočina 400 l z IKZ 20 bar, signalna luč. Dosega ozke tolerance; primeren za avtomobilsko, letalsko, medicinsko, urarsko in strojno industrijo. Hsdsz Dv Akjpfx Al Deu

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 44.800 mm, skupna višina: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 4.500 mm, prosta razpetina: 3.600 mm, razmak između stupova: 3.600 mm, širina okvirja: 1.100 mm, višina police: 4.500 mm, dolžina police: 44.800 mm, dolžina opore: 3.600 mm, 4 vrste regalov za palete (M45113615-3) dolžina 11,3 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, Hjdpjzvunrofx Al Dou 3 nivoji nosilcev, nosilnost 3000 kg. - 16 okvirjev (RM4511 - RAL5019) - 32 podstavnih plošč, podložni material, vijaki - 64 talnih sidrnih elementov (ZZBA1210) - 72 posameznih nosilcev, dolžina 3,6 m (T3615 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so priviti, niso vnaprej sestavljeni. Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča/mest montaže - raztovarjanje z tovornjaka opravi kupec z lastno dvižno napravo - dostave se izvajajo na celotno ozemlje Zvezne republike Nemčije; razen na otoke! Dostave v države EU se izvajajo po predhodnem dogovoru.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Hjdpfefdkbhsx Al Dou Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard Hjdpfx Alsfdkb Ts Dju - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Hodefdkb Uepfx Al Dou - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.