Donau Dr40 nakup rabljenega (74)

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), delovna širina: 620 mm, številka stroja/vozila: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive system is hydraulic, supported by positioning and control systems. The machine features its own vacuum pump. Low operating hours (approx. 6,800 h). Usable heating element area: width 600 mm x depth 400 mm Max. part dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. upper part height: 350 mm - Max. lower part height: 350 mm (Combinations of part heights are possible, depending on contour.) - Max. operating temperature for contact process: 400°C The machine’s modular frame allows for easy retrofitting. Side and front doors in the welding area can be easily opened for simple retooling. The automatic safety lift door offers a high level of operator safety. Temperature controllers on the control panel display both actual and set values. The operating panel is a Siemens PLC control unit. Machine control is managed via Siemens PLC (S7-300 controller). Tjdsykvdlspfx Aiqoc Heating elements are equipped with temperature sensors for temperature regulation and serve as safety shutoffs in case of overtemperature. Pin systems in the tool clamping surfaces enable reproducible positioning. Advantages of heating element welding technology: - Secure welding of workpieces with low or varying wall thicknesses - Low rejection rates due to precise and reproducible weld joints - Sensitive parts can be welded thanks to precise time, temperature, and force control - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility must be verified) Technical specifications: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 wires, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with control panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with safety door fully raised: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping unit Coolant system Tjdpfx Aismt Ed Rsqec Electrics 24V control voltage Emergency stop, dual-channel Safety guard at the drill Completely overhauled in 2025 12 months warranty New paint finish RAL 7035/7031

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Tedjt Hwwqspfx Aiqoc Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Stanje: rabljeno, Leto izdelave: 1980, Milling length 1750 mm Milling width 260 mm Module – max. 10 Module – min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Tsdpfx Aet Hxageiqjc Space requirements approx. m D O N A U – K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year 1980 # 80-234x _____ Max. gear cutting length 1,750 mm Milling travel/crosswise milling width max. 260 mm Helical gearing up to 30° Module range steel/cast iron max. 10 to 12 Effective table clamping surface 275 x 1,830 mm Mounting height under milling spindle axis min./max. 150 / 430 mm Cutter diameter min. / max. Ø 108 + 2 x cutting depth / max. 165 mm Cutter width max. unsupported / with counter bearing 50 / 140 mm Cutter arbor diameter max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swivels right / left 30° Milling spindle head swivels right / left 30 / 45° Infinitely variable feeds (milling slide) 0 – 600 mm/min Rapid return 2,000 mm/min Milling spindle drive approx. 4 kW Total power requirement 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special equipment: • Automatic milling cycle control via cam plate on the milling head slide and on the table slide, with the possibility of skip control (automatic bypass of non-milling sections) and pendulum milling operation (synchronous milling on one table half and workpiece change on the other table half) • Hydraulic workpiece clamping device continuous approx. 260 x 1800 mm, clamping width max. 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric actuation • Manual fine adjustment of the table (0.001 mm), e.g. for precise insertion into a pre-milled gear profile • Various change gears (approx. 10 pcs), 2 cutter arbors, central lubrication with pulser, built-in hydraulic system, separate coolant unit, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT € 49,500.-- This machine is especially suitable for milling racks as well as for making broaching tools (back milling by swiveling the milling head). Condition : very good – ready for demonstration Delivery : ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2011, Tlak: 400 Dolžina upogibanja: 4050 Razmik med stojali: 3400 Moč motorja: 37,5 kW Teža cca.: 25.000 kg Dimenzije (D x Š x V): 5750 x 2110 x 3440 mm RAZPRODAJA ZALOG – NEVERJETNA CENA! CNC upogibni stroj DURMA AD-S 40400 (4 m x 400 t) (Nova cena cca. 170.000 EUR) Tehnični podatki: Proizvajalec: DURMA Model: AD-S 40400 Leto izdelave: 2011 Dolžina upogibanja: 4.050 mm Tedpfxjvfy Sxo Aiqjc Pritisna sila: 400 ton Osi: Y1, Y2, X, R + CNC-krmiljeno bombiranje Moč motorja: 37 kW Oprema in poudarki: - CNC bombiranje – motorizirano nastavljivo prek krmiljenja - Zgornje orodje: 1010/A/75° segmentirano, zamaknjeno - Matrica: Multi-V matrica - CNC-krmiljen zadnji bat - 2 roki za podporo pločevine na linearnih vodilih - CE skladna laserska varnostna naprava (Lasersafe) na zgornjem nosilcu - Stroj ustreza aktualnim CE predpisom - Vgrajena nova črpalka Stroj se prodaja v trenutnem stanju. Stroj je bil kupljen v okviru stečajnega postopka in nato prepeljan v našo halo. Osnovne funkcije "gor" in "dol" so bile preizkušene in delujejo. Poleg tega ne moremo dati nadaljnjih informacij o tehničnem stanju ali delovanju stroja. Ogled na lokaciji je možen po predhodnem dogovoru. Prodaja po ogledu in brez garancije. Enkratna priložnost – na voljo takoj! Samo 1 kos na zalogi – neposredno z lokacije – brez čakalnih dob! Izkoristite to redko priložnost za visokozmogljiv stroj za delček cene novega.

Stanje: rabljeno, Leto izdelave: 2011, Pritisk: 400 Dolžina upogibanja: 4050 mm Razdalja med stojali: 3400 mm Moč: 37,5 kW Teža pribl.: 25.000 kg Dimenzije (D x Š x V): 5750 x 2110 x 3440 mm RAZPRODAJA ZALOGE – NEVERJETNA CENA! CNC upogibni stroj DURMA AD-S 40400 (4 m x 400 t) (Nova cena cca. 170.000 EUR) Tehnični podatki: Proizvajalec: DURMA Model: AD-S 40400 Leto izdelave: 2011 Dolžina upogiba: 4.050 mm Tlačna sila: 400 ton Osi: Y1, Y2, X, R + CNC vodena bombiranje Moč motorja: 37 kW Oprema in poudarki: CNC bombiranje – motorizirana nastavitev preko krmiljenja Zgornje orodje: 1010/A/75° – segmentirano, zamaknjeno Matrica: Multi-V matrica CNC vodeni zadnji prislon 2 nosilna roka za pločevino na linearnih vodilih CE skladna laserska varnostna naprava (Lasersafe) na zgornjem prečniku Stroj izpolnjuje aktualne CE predpise vgrajena nova črpalka Stroj se prodaja v trenutnem stanju. Tsdpjv Rtg Tsfx Aiqsc Stroj je bil pridobljen v okviru stečajnega postopka in nato prepeljan v našo halo. Osnovne funkcije 'gor' in 'dol' so bile preizkušene in delujejo. Dodatnih informacij o tehničnem stanju ali delovanju naprave ne moremo podati. Ogled na lokaciji je možen po dogovoru. Prodaja po sistemu 'videno-kupljeno' in brez garancije. Enkratna priložnost – takoj na voljo! Samo 1 kos na zalogi – neposredno s skladišča – brez čakalne dobe! Izkoristite to redko priložnost za visoko zmogljiv stroj za delček nove vrednosti.

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, For sale is an FTIR spectrometer – NICOLET IS20 MID-IR DTGS spectrometer, which was used for one year as part of a research project. Operated in a laboratory environment; no damage. Scope of delivery: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 device labeling in German 1x European Schuko power plug, 250V 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 upgrade from 20" monitor to 24" monitor 1x iS10-iS20 transmission accessory 1x ST JAPAN ATR-FTIR polymer bundle 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB Tjdpferklx Isx Aiqoc Original price: €31,998.77 Sale EXW, as is

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots on the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Central lubrication Tjdpfx Aioyxw Ddoqec • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travels Tool holder type SK 40 Column diameter 195 mm Table dimensions 1800 x 600 mm Number of T-slots 4 T-slot spacing 125 mm Quill travel (Z-axis) 200 mm Column travel (W-axis) 410 mm Distance spindle nose to table top (min.) 70 mm Distance spindle nose to table top (max.) 680 mm Distance spindle nose to floor (min.) 970 mm Distance spindle nose to floor (max.) 1580 mm Drilling radius 540 – 1590 mm Working table height 900 mm Machining Capacities Drilling capacity full material St 60: Ø 40 mm GG 22: Ø 50 mm Thread cutting St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range 15 – 2800 rpm Torque up to 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis AC servo motor 0.25 kW Y-axis AC servo motor 0.25 kW Z-axis AC servo motor 4.50 kW W-axis AC servo motor 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless 5 – 2000 mm/min Precision Positioning accuracy X/Y-axis over 1200 mm ± 0.075 mm Electrical Data Operating voltage/frequency 400V / 50Hz Control voltage 24V Hydraulic unit for clamping 0.75 kW Total connected load 13.0 kVA Weight Danumeric 440 (without packaging) with 1800 x 600 mm table 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, back-lit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Unit of measurement: mm or inch, also in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining Cycles Standard software options: dialog programming, 38 zero point shifts, rotate and mirror, Teach-In for X, Y, Z, program restart with selectable entry options Zero point determination: cycles for determining zero points by manual touch probe for: - arbitrarily fixtured rectangular parts - arbitrarily fixtured round parts - alignment of cast or flame-cut parts - angle determination on round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools Tjdpfxsu Dg D Ae Aiqsc • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: • USB

Stanje: dober (rabljeno), Leto izdelave: 1965, Funkcionalnost: popolnoma funkcionalen, globina grla: 930 mm, For sale is a Donau brand radial drilling machine, model DR30. The machine is in good condition and fully functional. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle taper: MK 3 Spindle speeds: stepless, approx. 45 - 2240 rpm Tjdpfowal Hpjx Aiqec Quill travel: approx. 170 mm Reach: approx. 930 mm Swing range of the arm: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Thread cutting device with automatic cut-off and reversal. Electrically driven vertical adjustment of the arm. Left-hand drilling operation, both by hand and by foot pedal. Transport and loading can be organized Europe-wide upon request, at an additional cost. All prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Tsdpjvv Spkefx Aiqsc Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine Tjdsirax Uspfx Aiqjc -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: dober (rabljeno), Leto izdelave: 2006, Automated Small Parts Warehouse (AKL), Dematic / Siemens, approx. 19,450 tote storage locations, totes approx. 600 x 400 x 320 mm – : Price ex location: €109,000 (net), plus dismantling, etc.! Manufacturer: Siemens AG, Logistics and Assembly Systems, Distribution and Industry, 58300 Wetter/Ruhr Type: AKL Year of manufacture: 2006 Device type: Dematic SR-M100/1 System dimensions (L x W x H): 32,282 x 15,015 x 7,064 mm Tedpfxotw Diie Aiqec Storage locations: 19,450 pcs Number of stacker cranes: 3 units Payload: 2 x 50 kg Load units (max. dimensions): 600 x 400 x 320 mm Travel speed: 200 m/min Lifting speed: 120 m/min Extension speed: 100 m/min Condition: good Available: Q4 2024 Location: 89584 Ehingen (Donau)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dokumentacija / priročnik, Kapaciteta: 4050 mm x 175 ton Razdalja med okvirji: 3600 mm Hod: 265 mm Krmiljenje: DURMA DT15 (3D zaslon na dotik) Tedpfx Ajyrdgqjiqsc Serijska št.: 73362219436 Dimenzije: 5200 x 1900 mm Višina: 2930 mm Teža: 12.750 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, stiskalna sila: 178 t, hod: 265 mm, skupna širina: 1.900 mm, skupna višina: 2.930 mm, skupna masa: 12.750 kg, največja dolžina izdelka: 5.200 mm, število osi: 3, Ta 3-osna stiskalnica Durma AD-R 40175 je bila izdelana leta 2022. Ponaša se z dolžino upogibanja 4.050 mm in močjo upogibanja 175 ton ter nudi robustne zmogljivosti za različne aplikacije. Stroj je opremljen s CNC krmiljenjem DURMA DT15 in 3D zaslonom na dotik za boljšo uporabniško izkušnjo. Če iščete visokokakovostno zmogljivost upogibanja, razmislite o stiskalnici Durma AD-R 40175, ki je na voljo v naši ponudbi. Za več informacij nas kontaktirajte. • Razdalja med stebri: 3.600 mm • CNC krmiljenje: DURMA DT15 (3D zaslon na dotik) Tehnične specifikacije Tjdpfxoy E Nfye Aiqsc Dolžina upogibanja 4050 mm

Stanje: novo, Leto izdelave: 2025, We are a manufacturing company that continues to develop dynamically, thanks to the professionalism and commitment of our employees. Our accumulated experience enables us to offer the best and highest-quality solutions in the field of manufacturing. Folding Machine ZGR – 4140 mm 0.8 mm - Working length: 4140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max. 150 degrees - Clamping beam thickness: 30 mm - Upper beam lift: 80 mm - Weight: approx. 1000 kg - Upper beam adjustable in three positions Features: Tedpjch Tkvefx Aiqsc - Roller shear 0.8 mm + 350 euros - Degree scale - Angle stop - Rear frame for sheet support Price: 7,200 euros Shipping: 500 euros to Germany and Austria Please contact us if you are interested.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 47.512 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.230 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 850 mm, model krmilnika: HEIDENHAIN iTNC 435, največja hitrost vretena: 6.000 obr/min, TEHNIČNE PODROBNOSTI Pomik osi X: 2.230 mm Pomik osi Y: 1.400 mm Pomik osi Z: 850 mm Dimenzije mize: 2.000 mm × 1.250 mm Največja obremenitev mize: 6.000 kg Hitrost vretena: 6.000 min⁻¹ Vpenjalni konus: SK50 Število orodij v menjalniku: 40 Hitri premik v X / Y / Z smeri: 12 m/min PODROBNOSTI O STROJU Model krmiljenja: HEIDENHAIN iTNC 435 Moč vretena: 38 kW Dimenzije in teža Dimenzije (D × Š × V): 6.135 mm × 4.338 mm × 4.150 mm Teža stroja: 22.000 kg Obratovalne ure stroja: 72.846 h Obratovalne ure programa: 48.891 h Todpfsy Dgy Esx Aiqsc Obratovalne ure vretena: 47.512 h OPREMA Sistem za hlajenje Notranje hlajenje (IKZ) Elektronsko ročno kolo Merilna tipala Avtomatsko merjenje obdelovanca Izpiranje ostružkov Transporter za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 42.832 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 760 mm, model krmilnika: FANUC SERIES 18i MB, razmak između stupova: 2.300 mm, DÉTAILS TECHNIQUES Course X: 3 000 mm Course Y: 2 100 mm Course Z: 760 mm Distance entre colonnes : 2 300 mm Dimension de la table : 3 020 mm × 2 010 mm Charge maximale sur table : 10 000 kg Cône de broche : ISO-50 Vitesse de broche standard : 6 000 tr/min Diamètre max. outil / logement vide : 127 mm / 215 mm Longueur max. outil : 350 mm Poids max. outil : 20 kg Capacité changeur d’outils : 32 outils Avance rapide X : 20 000 mm/min Avance rapide Y : 15 000 mm/min Tedpfxoymxi Aj Aiqsc Avance rapide Z : 15 000 mm/min Avance de coupe : env. 1 – 10 000 mm/min DÉTAILS DE LA MACHINE Commande CNC : FANUC SERIES 18i MB Puissance moteur broche (continu / 30 min) : env. 22 / 26 kW Heures de fonctionnement avance : 42 832 h Heures de fonctionnement automatique : 53 246 h ÉQUIPEMENT Changeur automatique de tête (avec tête de fraisage angulaire) Palpeur RENISHAW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 47.870 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 760 mm, obremenitev mize: 10.000 kg, največja hitrost vrtenja: 6.000 obr/min, TEHNIČNE PODROBNOSTI Pomik X-osi: 3.000 mm Pomik Y-osi: 2.100 mm Pomik Z-osi: 760 mm Tedpfx Aox Agh Rsiqsc Razdalja med stebri: 2.300 mm Velikost mize: 3.020 mm × 2.010 mm Nosilnost mize: 10.000 kg Vpenjalo vretena: ISO-50 Standardna hitrost vretena: 6.000 vrt/min Moč vretena (trajna / 30 min): ca. 22/26 kW Kapaciteta menjalca orodij: 32 orodij Maks. premer orodja: Ø 127 mm / Ø 215 mm Maks. dolžina orodja: 350 mm Maks. teža orodja: 20 kg Hitro pomikanje X-osi: do 20.000 mm/min Hitro pomikanje Y-osi: 15.000 mm/min Hitro pomikanje Z-osi: 15.000 mm/min Rezalni pomik: pribl. 1 – 10.000 mm/min PODROBNOSTI STROJA Število ur programa: 47.870 h OPREMA Razširitev opreme na avtomatski menjalec glav z kotno rezkalno glavo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 61.082 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 800 mm, model krmilnika: HEIDENHAIN TNC 426, Oprema: transportni trak za ostružke, Important information: Auction extended by 14 days. The control system has been subsequently identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly serviced! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Tsdoy Dgyfepfx Aiqjc Feed rate Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Total installed power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT Highly rigid gantry design Precision linear guides and ball screw drives Spacious working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 61.297 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 800 mm, model krmilnika: HEIDENHAIN TNC 426, Oprema: transportni trak za ostružke, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! Januarja 2025 je proizvajalec vgradil novo vreteno! Stroj je bil redno vzdrževan! Prejšnja uporaba: Stroj je bil pretežno uporabljen za precizno obdelavo. Groba obdelava je bila opravljena le v manjši meri. TEHNIČNI PODATKI Hod X-os: 2.800 mm Hod Y-os: 2.200 mm Hod Z-os: 800 mm Pomiki Hitri pomik: 35.000 mm/min Moč vretena S1 (neprekinjeno delovanje) navpično: 10.000 vrt/min Moč vretena S1 (neprekinjeno delovanje) univerzalna nihajna glava 2-osi: 18.000 vrt/min Vertikalna rezkalna glava: TVS 10.000 Nihajna rezkalna glava: TU 18.000 Vpenjalo za orodje: HSK 63 A Menjalnik orodja: 40 orodnih mest PODROBNOSTI O STROJU CNC krmiljenje: HEIDENHAIN iTNC 530 Todpezb D Aqjfx Aiqec Električni podatki Napajalna napetost: 400 V (–15 %, +10 %) Frekvenca: 50 Hz Tok: 101,1 A Skupna instalirana moč: 59,8 kW Delovne ure Čas vklopa: 99.222 h Čas delovanja programa: 61.297 h OPREMA Visoko toga portalna konstrukcija Precizna linearna vodila in kroglična vretena Prostorna delovna cona s 2,8 m hoda X-os Visoke hitrosti podajanja za učinkovito rezkanje Idealno za orodjarstvo, izdelavo kalupov in strojegradnjo Dokumentacija in certifikat o prevzemu po ISO standardih Menjalec orodja Hladilni sistem Transporter za ostružke Menjalna rezkalna glava s 4. in 5. osjo Vzdrževalna in servisna dokumentacija

Stanje: rabljeno, številka stroja/vozila: 2796, Case Rounding Machine Hunkeler BDR 40 – fully cleaned and repainted – Serial No. 26964 Output: 250–300 pcs/hour Spine width: 10–120 mm Spine length: up to 450 mm Online video inspection via Skype video We would be pleased to welcome your visit – further machines in stock Immediately available – ready for inspection Located in Emskirchen / Nuremberg – available for testing Tedpfxeh Axcve Aiqoc

Stanje: rabljeno, številka stroja/vozila: 4344, Buchdeckenrundemaschine - Hunkeler BDR 40 (4344/1) Serien-Nr. 4344/1 Leistung: 250 - 300 Stück/Stunde Formatbereich: Rückenbreite: 10 - 120 mm Rückenlänge: bis 450 mm Online-Video-Inspektion via Skype-Video möglich Tsdpfjh Axcrsx Aiqec Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen/Nürnberg – Test unter Strom möglich

Leto izdelave: 2024, stanje: novo, Manufacturer: DURMA Model: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Clearance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Throat depth: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis return speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 mm Motor power: 37 kW Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25,000 kg Standard equipment Control unit: CNC Cybelec ModEva 19T CNC-controlled motorized crowning system European tool clamping system, or Durma clamping system upon customer request Extended equipment: Safety system according to CE standard for the EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Backgauge controlled axes: X1, X2, R1, R2, Z1, Z2 Controller: DELEM DA-66T Choice of Delem 66T – 69T or Durma controller DAM – Durma angle measuring system Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation software AP3 & AP4 bending aids Selectable from 750 mm to 1500 mm Parking area for support arms (1000 mm) TANDEM setup preparation Laser bending line Tedpfjd Hy Husx Aiqsc Oil heating Centralized lubrication, manual or motorized Cabinet air conditioning Other machines are available for demonstration at our site in Staufenberg. Further information available upon request.