Debus Hoover nakup rabljenega (210)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Čistilni stroj s krtačami in dvema nastavitvama hitrosti: 1500/3000 vrt/min. Tjdpfxjzmp U Uj Aqtsb Navodila za uporabo.

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Rated power: 8 kW, weight: 2.2 t, with control cabinet. Tsdpfoilht Uex Aqtjb

Stanje: rabljeno, ACCESSORIES 1°) Round Vibratory Finishing Machine Model CD200 * Sound insulation hood * Separation device * Tank dimensions: 200 [L] * Diameter: 1085 [mm] - Weight: 475 [kg] - Required space: 1560 x 1350 [mm] 2°) Drying Tunnel Model BFHL 350 * Weight: 1200 [kg] - Required space: 2470 x 1030 [mm] 3°) Powered Table Model SDT 1500 * Diameter: 1500 [mm] * Max. load on table: 25 [kg] - Weight: 100 [kg] Tedjug U Eqopfx Aqtob 4°) Waste Treatment by Centrifugation Model ZM03 * Water recycling - Weight: 250 [kg]

Stanje: rabljeno, TECHNICAL DATA - High-performance machine for deburring and polishing small and micro parts - Low-noise operation - Vibration-dampened rotor suspension - no floor anchoring required - Tool-free container fixation - Stainless steel water collection tray - Integrated control with 5 fixed speeds - Number of containers: 4 units - Speeds: 75/100/125/175 rpm - Fuse protection: 16 A - Power: 2.2 kW - Dimensions (W x D x H): 1537 x 1268 x 1041 mm - Weight: 640 kg Working Container Technical Data - Material: Stainless steel - Container volume: 5 l - Usable volume: 3 l - Batch volume: 1 l - Inner lining: Rubber Tjdpoug U Hnofx Aqtob

Stanje: rabljeno, TEHNIČNI PODATKI - Kapaciteta rezervoarja: 4 x 8L * Hitrost: 23-132 [obr./min] * Moč: 0,25 [kW] - Premer bobna: 402,5 [mm] - Uporabna prostornina: 14 [l] Tedew Hufuopfx Aqtjb

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Boschert Brushing Deburring Machine Model K3 for deburring straight sheet metal edges and at the lateral aggregate suitable for cut-outs and notches up to 70 mm depth as well as outside radii on sheet metal. 3 motors, each 1.5 kW Brush diameter: 300 mm Brush material: wire brushes VA/steel Material thickness range: 0.8–8 mm Machine dimensions: Width: 1400 mm Tjdpfetr Avisx Aqtob Height: 580 mm Depth: 670 mm Base frame: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down as sheet guide The sheet edge is deburred simultaneously from above and below as it is guided through the machine. For heavy burrs, the motors can be switched to operate together so that both remove the heavy burr from above. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table extension serves as a storage surface.

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 715 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2530-01, delovna širina: 900 mm, Zaradi posodobitve strojev prodajamo naš skoraj nerabljen stroj Timesavers za mokro odstranjevanje robov. Stroj si je možno ogledati in ga preizkusiti, saj je priključen na elektriko. Za vprašanja smo vam na voljo. Tedpfx Aqev Tnfietob

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: B III 33-7086, Ponudba 25440 Tehnični podatki: - Premer krtače 250 mm - Širina krtače 60 mm - Hitrost kroženja 1500 / 3000 vrt/min Todpfszrv Daox Aqtob - Pogon 400 V / 1,0 / 1,4 kW - Višina delovne površine 900 mm - Potrebna površina cca. Š 650 x V 1150 x G 450 mm - Teža cca. 100 kg

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: B II 17-5680, Ponudba 26901 Tehnični podatki: - Premer krtače 250 mm - Širina krtače 60 mm - Hitrost krožnega gibanja 1500 / 3000 vrt/min - Pogonski sistem 400 V / 2,2 / 3,0 kW - Nastavitev globine krtače - Nastavljiva višina oporne mize - Višina delovne površine 900 mm - Potrebna površina cca. Š 720 x V 1150 x G 450 mm - Teža cca. 180 kg Tedpfx Aszrvxweqtsb

Stanje: rabljeno, Leto izdelave: 2005, skupna dolžina: 3.940 mm, skupna širina: 1.980 mm, skupna višina: 2.010 mm, Poids à vide : 7 000 kg Largeur de travail : 950 mm Hauteur de travail : 0,5–120 mm - Année de construction : 2005 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : - Commande : CNC - Nombre de stations [pcs] : 3 - Type de station 1 : Bande abrasive Tjdexwnbujpfx Aqtsb - Type de station 2 : Brosse rotative - Type de station 3 : Brosse rotative - Puissance [kW] : 39 - Épaisseur min. de la tôle [mm] : 0,5 - Épaisseur max. de la tôle [mm] : 120 - Largeur de travail max. [mm] : 950 - Dimensions de transport : 3940 mm x 1980 mm x 2010 mm (L x l x H) - Poids de transport [kg] : 7 000 kg - Nombre de colis de transport : 4 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/Régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Lukas van Rossum

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Tsdpfxot Hwyls Aqtob Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Machine weight approx. t Tedpfx Ast Hwv Heqtsb Space requirement approx. m CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. Tsdpfx Aqet Hw Shotsb 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 Tsdpfxst Hw Iio Aqtob _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 1995, stanje: rabljeno, Diameter 0 mm Workpiece length 1000 mm Workpiece width 875 mm Tedpfx Ajt Hwu Noqtob CNC deburring cell, with 2 pallets / 10 WW / 510 - 5 axes CNC - SIEMENS 510 controlled flexible brushing and deburring center

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Tedpfxot Hw Dko Aqtjb Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Stanje: novo, Leto izdelave: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Tedpfx Asv R U Ifjqtjb 2nd unit, rotor group: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush with a 1.5 kW motor, variable drive Both units with oscillation: yes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Širina stroja: 900 mm Teža: 500 kg Tedstnf Rrepfx Aqtsb

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, moč: 19 kW (25,83 KM), DM1100 DC EVO Odstranjevanje trdne žlindre Zaobljanje robov do širine 1100 mm. DM1100 DC EVO odstranjuje ostrine in zaobluje notranje in zunanje konture debelih jeklenih delov, ki so bili večinoma izrezani s plazmo ali plamenom. DM1100 DC je opremljen z velikim valjem za odstranjevanje ostrih robov in dvema protismerno vrtečima se prečnima pasovoma. Ti zagotavljajo zaobljanje robov z enakomernimi in mehkejšimi robovi. Ta stroj izstopa zaradi vertikalno premikajočega se brusilnega valja za izravnavo toleranc ter širokega magnetnega območja, ki omogoča varno obdelavo tudi majhnih delov. DM1100 DC Delovna zmogljivost (mm) 1100x120 Število brusilnih valjev (D) 1 Število postaj s prečnim pasom (C) 1 Tedpfetzkg Uex Aqtsb Specifikacije brusilnih valjev Ø435mm 20SH Dimenzije brusilnega pasu (mm) 1150x1520 Hitrost brusilnega valja (vrt./min.) 185-650 Hitrost prečnega pasu (m/s) 2-8 Hitrost podajanja (m/s) 0,5-4,0 Motor brusilnega valja (kW) 11 Motor prečnega pasu (kW) (2x) 3 Motor za podajanje (kW) 0,37 Skupna moč (kW) 19 Priključek za sesanje prahu na glavo (Ø mm) (2x) 150 Dimenzije (mm) 2258x2900x2220 Teža (kg) 4100

Leto izdelave: 1990, stanje: dober (rabljeno), številka stroja/vozila: XXXX, Ref. No. 20314 Technical Data: - Steel – Stainless steel – Aluminium – Plastics, machining - Deburring and chamfering process performed with milling cutter - Support angle / chamfer angle adjustable - Chamfer angle adjustment: 15 to 45° - Chamfer width continuously adjustable: 0 to 7 mm - Length of guide rail: 500 mm - Speed: 2750 rpm - Drive: 400 V / 0.7 kW - Required space approx.: W 650 x D 600 x H 950 mm - Weight approx.: 30 kg Tsdpek H D Dfofx Aqtob

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 2.309.044, Offer 23195 Precision Deburring and Chamfer Milling Machine / Edge Milling Machine Technical specifications: Tjdpfsnvdtcsx Aqtjb - Suitable for processing steel, stainless steel, aluminium, and plastics - Deburring and chamfering process performed with milling cutter - Chamfer angle: 45° - Chamfer width: steplessly adjustable - Guide rail length: 500 mm - Working height: 750 mm - Spindle speed: 2750 rpm - Drive: 400 V / 0.7 kW - Required floor space: approx. W 500 x D 400 x H 850 mm - Weight: approx. 30 kg

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: ST-B-1661, Offer 24154 Technical Data: Todjtwmv Ejpfx Aqtob - Brush diameter: 250 mm - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 1.0 / 1.4 kW - Working height: 900 mm - Required space approx.: W 650 x H 1150 x D 450 mm - Weight approx.: 100 kg

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Ponujamo dvostransko strojno orodje za odstranjevanje robov cevi. Premer cevi: 8 mm. Število obdelovalnih postaj: 2. Vključno z orodji za odstranjevanje robov in nadzorno omarico. Ogled na licu mesta je možen. Tsdpfx Aezrn Nujqtsb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0312101, delovna širina: 550 mm, skupna masa: 3.000 kg, moč: 32 kW (43,51 KM), TEHNIČNE PODROBNOSTI Število postaj: 1 kos Vrsta postaje: brusilni trak Maksimalna delovna širina: 550 mm PODROBNOSTI O STROJU Tjdpfx Aszrmqqsqtob Moč: 32 kW Način upravljanja: konvencionalen Način obdelave: suha Dimenzije in teža Dimenzije (D x Š x V): 1.700 x 2.700 x 2.900 mm Lastna teža: 3.000 kg Transportni paketi: 2 kosa OPREMA Označitev CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Letnik 2013 Serija 2200 Tedey Tu Dkjpfx Aqtsb