Debelinska Žaga S Spiralno Gredjo nakup rabljenega (86.191)

Stanje: rabljeno, Mitre crosscut saw for aluminium (special-purpose machine construction with 4 servo motors) Crjdpfx Ahodzp T Do Hsf Circular saw, mitre saw, longitudinal cutting saw Year of manufacture: 2002 Saw blade diameter: 500 mm Cutting capacity at 90° Round: Ø 180 mm Rectangular: 350 x 140 mm (via longitudinal cut) Cutting capacity at 45° Round: Ø 180 mm Rectangular: 350 x 100 mm (via longitudinal cut) Guide rail length (base frame): 1100 mm Travel on base frame (forward-backward): 650 mm Travel on column (up-down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Controlled longitudinal cutting motion - Controlled saw blade height adjustment - Controlled mitre cut via swivelling saw aggregate - Controlled mitre cut via tilting saw aggregate - Swivelling and tilting of the saw via INDRAMAT servo motors with precision gearbox (Motors: MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Vertical axis movement via INDRAMAT servo motors and ball screw spindles (Motor: MKDO41B-144-KP1-KN) - A total of 4 Indramat servo motors installed - Very high-quality German machine construction Space requirement (L x W x H): 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition The unit comes from a special-purpose machine for specific products. All other components and electrical parts necessary for building a new special-purpose machine are also available.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 450 mm, cutting capacity at 90° (round/square/profiles): 160 / 145 / 320x50 mm, cutting capacity at 45° (round/square/profiles): 160 / 130 / 250x40 mm, cutting speed: 1950 / 3900 m/min, feed rate: 0–3000 mm/min, mitre range: 0° to 90°, pivot range: 180°, weight: approx. 1.5 t. An on-site inspection is possible. Codpfx Aowa Tilsh Horf

Stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 450 mm, cutting width: 4 mm, saw blade type: carbide-tipped (HM) / high-speed steel (HSS), bore diameter: 50 mm, mounting screws: 4, bolt circle for mounting screws: 80 mm, screw diameter: M12. Saw blade feed rate: 3.5 m/min, rapid return: 4.5 m/min, infeed speed: 10 m/min / 20 m/min, single stroke cut length: 10 mm / 1000 mm, double stroke: 2000 mm, rotary table swivel range: +/-90°. Machine dimensions (L/W/H): approx. 2700 mm / 1450 mm / 1900 mm, weight: approx. 1500 kg. Documentation available. An on-site inspection is possible. Credpfx Asv Hgkqsh Hsf

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: omejena funkcionalnost, K440 je ena izmed visoko zmogljivih tračnih žag. Zaradi optimalne hitrosti traku je vertikalna žaga idealna za razrez večjih količin svežih in zamrznjenih kosov. Žaganje zamrznjenih blokov rib in mesa. Stacionarna žaga K440 z valjčno drsno mizo je primerna za univerzalno uporabo v razsekovalnicah, supermarketih, v mesni in ribji industriji. Uporabne dimenzije: Premer jermenice: 430 mm Cedpfxjx S I Rbj Ah Hsrf Tračna žaga: 3370×16 mm Največja višina reza: 415 mm Največja stranska odprtina reza: 410 mm

Leto izdelave: 1995, stanje: rabljeno, Max. cutting length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of length and angles via Diamond control system Saw head swivels for internal and external angles (20–135°) Travelling roller conveyor Cjdpov Ip T Djfx Ah Horf Soundproof enclosure Minimum quantity lubrication system Chip conveyor Weight: approx. 2,800 kg

Leto izdelave: 2004, stanje: delavnici obnovljeno (rabljeno), Walter Double Saw with TRKS 200 Feeder Cjdpsh R Tvtofx Ah Hjrf Cutting height of the double saw: 200 mm, motor power: 40 kW. Chain feeder with controllers and adjustable prism for various diameters. Gearbox for feed speed adjustment.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Horizontalna tankorezna tračna žaga s 3 glavami Delovna širina: 300 mm Za rezanje največ 4 lamel naenkrat Nova različica 2025 z večjimi kolesi in širino 80 mm Zaslon na dotik in PLC Schneider Kolesa premera 970 mm za večjo hitrost rezanja Frekvenčni pretvornik na kolesih za nastavljivo hitrost rezanja Za lamele od 2 mm naprej * kot nova * Cedpfxovwbg Us Ah Horf

Leto izdelave: 2026, stanje: novo, - 260 mm cutting height Cedpjbu Rqpefx Ah Hsrf - 750 mm passage width - 5–30 m/min infinitely variable feed rate - 2 x 75 kW saw motors - 3 kW feed motor - 70 mm saw shaft diameter - 400 mm saw blade diameter - 5,000 kg weight

Stanje: novo, Leto izdelave: 2026, max. cutting height: 200 mm max. cutting width: 400 mm max. passage width: 490 mm feed speed: 5–30 m/min Cedpfx Aou I Dujh Herf saw motors: 2 × 37 kW (higher power available) feed motor: 2.2 kW saw shaft diameter: 70 mm saw blade diameter: 325 mm weight: 2,800 kg Standard features: electric height adjustment for upper rollers Optional equipment: laser with adjustment mechanism driven roller conveyors electronic braking system

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.000 mm, vrsta vhodnega toka: trifazni, premer žaginega lista: 160 mm, skupna širina: 1.000 mm, skupna dolžina: 4.600 mm, skupna višina: 1.400 mm, Rezkalna žaga za furnir s predrezilom TOMESANI 3,0 m Specifikacija: • stanje - po celovitem pregledu, popolnoma delujoča • proizvajalec - TOMESANI • največja delovna dolžina rezanega elementa - 300 cm • glavni motor žaginega lista premera 160 mm - 2,2 KM • motor predrezila premera 100 mm - 0,17 KM • pnevmatski pritisni valj za križno furnir • lasten izpuh s vgrajenim ventilatorjem • dimenzije - 460 x 100 x 140 cm (d x š x v) Dodatne informacije: • stroj je v zelo dobrem tehničnem stanju, pripravljen za takojšnjo uporabo • priložene fotografije prikazujejo dejansko stanje izdelka Csdpfoxb Dyzjx Ah Hsrf • omogočamo vklop in preizkus naprave na kraju samem

Stanje: rabljeno, STROMAB TR 500 – Under-table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideally suited for precise and efficient cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in excellent technical condition and ready for immediate use. • Inspection possible at any time Csdpfx Asxiza Ujh Herf • Secure palletised shipping by freight carrier available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to changes and errors.

Stanje: dober (rabljeno), Leto izdelave: 2011, VEČKRATNA KROŽNA ŽAGA znamke COMA (izdelano v Španiji) Codpfxoza Hlrj Ah Herf 3 žagini listi. Ena fiksna, na levi strani, ostale premične. Največja razdalja med prvo in zadnjo žago: 3.100 mm 1. transportna veriga enojna 2. transportna veriga dvojna 3. transportna veriga enojna Stroj v celoti pregledan.

Stanje: rabljeno, dzinēji – 55 un 55 kW padeves motors – 7,5 kW augstuma regulēšanas motors – 1,1 kW griešanas augstums – 200 mm griešanas platums – 350 mm Cjdjwrw D Ropfx Ah Herf zāģripas diametrs max. – 300 mm vārpstas diametrs – 2 x 60 mm uzmavas diametrs – 2 x 70 mm sliežu platums – 350 mm kopējā jauda – 119 kW elektriskā padeves regulēšana automātiskā centrālā eļļošana elementa minimālais garums – 600 mm elektriskā augstuma regulēšana vārpstas augstuma regulēšana seši augšējie spiediena rullīši pneimatiskie stiprinājumi pieci pretatsitiena mietiņi lineāls uzgaļa diametrs – 220 mm vārpstas apgriezienu skaits – 4500 apgr./min iekārtas izmēri (garums/platums/augstums) – 275 / 235 / 210 cm svars – ~7000 kg Padevējs: max. griešanas garums – 1850 mm min. griešanas garums – 800 mm max. materiāla garums – 2500 mm min. materiāla garums – 600 mm max. materiāla platums – 700 mm max. materiāla augstums – 200 mm rullīšu platums – 700 mm rullīšu diametrs – 130 mm rullīšu skaits – 26 3 gludi spiediena rullīši 4 zobaini uzvelkošie rullīši padeve regulējama ar invertoru 0–70 m/min zāģa vadotņu centrālā eļļošana zāģa motoru jauda – 2 x 9,2 kW padeves motora jauda – 1,5 kW disksāna motoru jauda – 3 kW ķēdes motora jauda – 1,1 kW izmēri (garums/platums/augstums) – 7050 / 2100 / 1850 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Popoln okvir za žago za EWD Esterer Gatter. Tip HDN 600 ali HDS 600 z nastavljivo širino. Crjdpfx Aozn Uv Hsh Hjf Vključno z dvojnim napenjalnikom verige Jansen. Uporabljen le nekajkrat. Idealno za zalogo rezervnih delov.

Leto izdelave: 1999, stanje: rabljeno, The DSG 200 vertical sawmill is the ideal choice for woodworking shops specializing in furniture and wooden flooring production, offering high efficiency and reliable performance in daily operations. The used Wintersteiger mini band saw for wood is a very good investment—its major advantage over standard machines of this type is its compact footprint, while still excelling in material processing. It is designed for splitting individual elements and sizing them to the required dimensions. Operation of this machine is not particularly complicated and can be mastered quickly. The main advantage of our sawmill is its comprehensive equipment, most notably the saw blade lubrication system, controlled from the panel, which enables precise cutting of wet material. It features independent upper roller height adjustment for quicker cutting height changes. A pneumatic feed pusher supports material feed. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Saw frame stroke: 210 mm - 400 strokes per minute - Cutting height, steplessly adjustable on our frame: 45–250 mm - Maximum achievable cutting height: 400 mm - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm Crsdpfotvm Hdjx Ah Hjf - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Saw kerf: 0.9–1.1 mm depending on cutting height - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm - Weight: 5000 kg Pneumatic feed pusher included Supplied with the machine: - complete large saw blade frame - small saw blade frame - frame pins - frame tensioning wedges - saw blade spacers - wet-cutting saw blades - dry-cutting saw blades - set of upper transport rollers - 4 lower transport rollers - complete set of slides - frame yokes - pocket cutting guides - loading magazines - DTR documentation - electrical diagram

Leto izdelave: 2009, stanje: rabljeno, Aluminium saw system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Crodpfxjqzmnuj Ah Hsf Cross conveyor, discharge table, chip conveyor, and extraction system included Soundproof enclosure Controlled via Siemens S7 panel Operating manual and other documentation available; further technical data upon request The machine was operational until disassembly For further technical data, please inquire or refer to the photos

Stanje: novo, Leto izdelave: 2026, pritisk: 8 letvica, Bevel angle adjustment horizontal 15°-90°-15°, infinitely variable Saw motor: 5.50 kW (400 Volt) Saw blade: 600 mm Travel range - rear stop: 180 mm Working height: adjustable from 940 to 1000 mm via feet 2 x extraction nozzles (top on the hood & bottom) Net weight: 600 kg Dimensions (W x D x H): 135 x 140 x 150 cm RAL 9007 Grey Aluminum Rotary plate of precision-ground nickel steel Saw head guided by ball recirculation linear guides, offering high accuracy, long service life, and high rigidity. Workpiece clamping under low pressure possible when the hood is open. Hydropneumatic blade feed Chip flow directed to extraction hood. Equipment: • Precision under-table circular saw • Bevel adjustment: 0º/ 45º/ 90º/ -45º / -60º, infinitely variable • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction device – chip extraction unit • Mist lubrication system for air-oil cooling • Air pistol with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel Credpfsgwt S Tsx Ah Hof • Max. cutting height: 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures your workpieces are positioned precisely at the desired processing position on our UK 600 HA 90°. A gripper clamp holds the material; the NC controller automatically positions it. Then, clamping and sawing operations are initiated. All positions are pre-programmed into the control system. After the machine completes the operation, it automatically moves to the next cutting position. Depending on the workpiece, multiple parts can be clamped together side-by-side or stacked and positioned simultaneously. You are welcome to inspect the machine at any time in our production/demonstration hall. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-600-A is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials possible to a limited extent). The machine stands out for its easy operation, quick and convenient material changeover, as well as simple mitre angle adjustment. The UK-600 A offers a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed operates automatically at the push of a button, and the material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders. As standard, the machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connection points for a chip extraction system are provided as well. Additionally, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety cover! Equipment • Precision under-table circular saw Crsdpfxjgwt S Ee Ah Hef • Stepless mitre adjustment 0º/45º/90º/-45º/-60º • Includes 2 pneumatic clamps (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Minimum quantity coolant system for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600mm Our NC pusher system ensures that your workpieces are positioned at the desired machining point on our UK 600 HA 90°. A gripper clamp holds the material, with the NC controller positioning it automatically. Next, the clamping and sawing process is triggered. The positions are pre-programmed in the control system. After the machine completes the machining process, it automatically moves to the next sawing position. Depending on the workpieces, multiple parts can also be clamped either on top of or next to each other and positioned simultaneously. You are welcome to visit the desired system at any time in our manufacturing/showroom. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), 603 LBH Technische Beschreibung Haupttechnische Daten • Minimale Sägeleistung bei 90° min. mm 60 x 10 max. mm 610 x 310 • Sägeleistung bei 45° mm 400 x 310 • Sägeleistung bei 60° (nur an zwei Flanschen mit entsprechendem Zubehör verfügbar) mm 250 x 250 • Gehrungswinkel +45° / -60° Credpfx Ael Si Uujh Hjf • Sägebandabmessung mm 34 x 1,1 • Sägebandgeschwindigkeit m/min 78 • Bandmotorleistung kW 4 • Arbeitshöhe mm 850

Stanje: rabljeno, Leto izdelave: 2003, Delovna višina 2300 mm, delovna širina 3500 mm, motor 1,5 kW. 3 tlačni cilindri od zgoraj, 2 s strani. Tlačna moč na valj: 3000 kg. Hod tlačnega valja do 200 mm. Hidravlika: 10–150 bar. Potrebni prostor: 3950 x 900 x 2550 mm. Teža: 670 kg. Skladišče: Nattheim. Csdpfx Aevvkmbjh Hsrf

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Delovna širina: 4000 mm Delovna višina: 2550 mm Število tlačnih cilindrov: 6 kos S+S Bavaria 2000 L, stiskalnica za okna in okvirje Stiskalnica bo pred prevzemom v našem skladišču delno obnovljena. Tehnični podatki: - Delovna velikost: 4000 mm x 2550 mm (dolžina x višina) - Globina naslonjal in tlačnih plošč: 100 mm - Samodejni cikel stiskanja za kotne spoje "režo/čep" - Ročno upravljanje za ročno stiskanje - 1 osrednja tlačna letva, višina do 2550 mm - 1 bočna tlačna naprava - 1 zaporni ventil na 3. vertikalnem cilindru - 1 zaporni ventil na zgornjem horizontalnem cilindru - 3 krmilniki za poševna okna za vertikalne cilindre - 3 gibljive tlačne plošče, ki se lahko pritrdijo za stiskanje do 60 stopinj Crodszpblkspfx Ah Hjf - 2 podaljška za gibljivo tlačno ploščo za konična okna (trikotna) - Vse tlačne plošče in naslonjala so prevlečene s plastiko - Nadzorna omarica na spodnji strani, levo - Stiskalnica se lahko po potrebi popolnoma razstavi (cena na zahtevo!) - Barva: RAL 7035 svetlo siva z RAL 7016 antracitno sivo Slika prikazuje arhivsko sliko obnovljene stiskalnice. Še ni na voljo originalnih slik. (tehnični podatki glede na proizvajalca – brez jamstva!)

Stanje: zelo dobro (rabljeno), Ponujam na prodajo profesionalni digitalni osciloskop LeCroy WaveJet 354A, namenjen laboratorijski, servisni in industrijski uporabi. Gre za visokokakovosten merilni instrument s pasovno širino 500 MHz in frekvenco vzorčenja 2 GS/s. Credpfx Ahezru Sis Hjf Tehnični podatki: • Proizvajalec: LeCroy • Model: WaveJet 354A • Pasovna širina: 500 MHz • Frekvenca vzorčenja: 2 GS/s • 4 analogni kanali • USB-priključek • Vgrajen transportni ročaj • Napajanje: 90–264 V AC, 47–63 Hz Stanje: • Rabljen, v dobrem vizualnem stanju z običajnimi znaki uporabe. • Naprava se vklopi in deluje pravilno – zaslon je deloven, kar je razvidno iz fotografij.

Stanje: zelo dobro (rabljeno), Ponujam digitalni osciloskop Tektronix DPO 4032 Digital Phosphor Oscilloscope. Naprava je popolnoma delujoča, brez težav se vklopi in deluje pravilno. Prikaže začetni zaslon in merilni zaslon, kar potrdijo priložene fotografije. Vizualno stanje je dobro – ima normalne sledove uporabe, ki so posledica normalne uporabe. Tehnični podatki: • Proizvajalec: Tektronix • Model: DPO 4032 • Tip: Digitalni osciloskop • Pasovna širina: 350 MHz • Frekvenca vzorčenja: do 2,5 GS/s • 2 analognih kanalov • Barvni LCD zaslon • Vmesniki: LAN, USB Host, USB Device, VGA, CompactFlash • Napajanje: 100–240 V AC, 50–60 Hz Stanje: • Popolnoma delujoč. • Naprava se vklopi in deluje pravilno. • Prodaja se brez merilnih sond in ostale opreme. • V kompletu je samo osciloskop, kot je prikazan na fotografijah. Credpfx Aozru Hmjh Hof

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2014 Load capacity: 20 kg Reach: 1,726 mm Crsdpfx Aer Aka Ajh Hof

Stanje: dober (rabljeno), Leto izdelave: 2012, Malo rabljena mešalna, dozirna in nanosna naprava z zobniško črpalko v dobrem stanju: t-s-i mastermix gear basic – Mešalna in dozirna naprava za dvokomponentne silikonske lepile Codszq S Ifspfx Ah Hjrf – Dvozložna dozirna naprava z zobniško črpalko – Komplet cevi, 2,5 m, dvokomponentna pištola – Krmilnik Siemens S7-200 – Nadzor tlaka/izklop pri pomanjkanju – Nadzor časa ohranjanja v posodi z akustičnim opozorilom – 200-litrska posoda A – 20-litrska posoda B – Podaljšek nihajne roke, 800 mm – Podaljšek nihajne roke, 300 mm – Podaljšek kompleta cevi, 1000 mm – Samodejno izpiranje v položaju parkiranja – Leto izdelave 2012, ponovna izdelava pri T-S-I v letih 2016/17 – Naprava je bila malo rabljena – Prodaja iz lokacije Karlsruhe / južna Nemčija – Ogled je možen po dogovoru