Dalex Pl 100-2 nakup rabljenega (89.604)

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Na voljo je sušilec za plastični granulat Arburg z integriranim transportom materiala. Volumen lijaka: 100l, maks. temperatura sušenja: 150°C, grelna moč: 4,5kW, pretok zraka: 90m³/h, transportna višina: ca. 3000mm, dimenzije stroja (D/Š/V): ca. 950mm/600mm/2000mm, teža: ca. 150kg. Ogled na lokaciji je možen. Redpfxeyuyvae Agtst

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Na voljo 8 kosov. Različni modeli na zalogi, za več informacij nas kontaktirajte. Možen izvoz. Rjdoyypv Ijpfx Agtjt

Stanje: rabljeno, Electric dual screwdriving unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit features a pneumatic double stroke actuated via Festo valves and cylinders. Additionally, various monitoring devices are installed for complete automation. Technical data: Electric screwdriver torque: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Power consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Spacing between screwdriving tools: 73 mm - Equipped with a TORX Bit T27 or TP27 (presumably for M6 screws) - Requires a Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 each consist of the following components: Rexroth type Servo motor Rexroth type 0 Planetary gearbox Rexroth type 0 Encoder Rexroth type 0 Straight drive Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Power consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Rsdpfxohxvu Ej Agtot Straight drive Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 – 34 N Tool holder: 1/4" square Max torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A 7 m motor connection cable is included. Overall dimensions (W x H x D): approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Stanje: rabljeno, Electric dual screwdriver unit with automatic feed and pneumatic double-stroke mounted on handling device, handling system, manipulator for screwdriving technology Screwdriving unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double-stroke via Festo valves and cylinders. Additionally, various monitoring devices are installed for full automation. Screwdriver 1 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Direct drive Screwdriver 2 consists of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Offset drive Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric Screwdriver Unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material no.: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gear unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight output Rexroth Rsdpfx Aofx Hyfsgtst Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Max. payload: 14 kg Handyflex outreach: 250 to 650 mm Handyflex outreach expanded: max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable payload - Adjustable stop for limiting the radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Blue steel pallet as base plate not included Blue steel base plate is not part of the delivery.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, moč: 2,2 kW (2,99 KM), največja hitrost vrtenja: 2.700 obr/min, Demag motor/reduktor KBA 100 A -12/2 ED = 15/40% Redpjywkq Uofx Agtet 0,21 / 2,2 kW 425 / 2700 o/min Zobniški prenos DO8 i = 3,24 premer osi 50 mm Stanje: kot nov cena na vprašanje

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 1 h, številka stroja/vozila: V 516, skupna širina: 2.000 mm, skupna dolžina: 7.000 mm, skupna višina: 1.800 mm, obratovalni tlak: 300 letvica, stiskalna sila: 90 t, maks. debelina aluminijaste pločevine: 5 mm, moč: 11 kW (14,96 KM), lastna masa: 16.000 kg, rezalna sila: 90 t, leto zadnje generalne obnove: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminium throughput: 2,000–3,000 kg/h Drive power: 11 kW Rsdpfx Agolhqd Rotjt Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or oil collection tray Location: Austria Available from: 30/01/2026

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 940329, vrsta hlajenja: voda, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 Hz Sn 50% DC: 100 kVA S max: 318 kVA Redpfx Asvbgxqjgtet I20c: 48 kA U20 from 5.8 V to 8.3V in 2 steps Electrode gap: 240mm - 500mm Projection length: 350mm Fmax: 1100 daN at 6 bar Cooling water: 10L/min

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-7, lastna masa: 435 kg, največja dovoljena obremenitev: 2.265 kg, skupna masa: 2.700 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS PL 276 170 2700 2 NEW VEHICLE Internal dimensions: 276 cm x 170 cm Side wall height: 30 cm Loading platform height: 65 cm Gross vehicle weight: 2,700 kg Payload: 2,265 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sidewalls with tension latches Drop-down and removable on all sides 15 mm thick, anti-slip, heavy-duty phenolic plywood floor Automatic jockey wheel with 400 kg support load 8 noise-dampening lashing eyes, 800 kg traction force each Reinforced 13" C-rated tires with steel valve M+S tires Net/rope hooks on the frame 13-pin plug Front LED position lights Rear lamps with reversing light, fog lamp, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026: - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without sidewalls (discounted price) - Sidewall height increased to 35 cm - Black Edition (powder-coated sidewalls and rims in black) - Integrated loading ramps 2,800 kg - Steel plate on floor - Complete LED lighting - Anti-theft device - Net with fine or coarse mesh - H-frame - Mesh cage in various heights, also with closed design - Sidewall extensions 30 cm with tension latches - Flat cover tarpaulin with or without support bows - High cover tarpaulin 160 cm or 180 cm Further accessories available on request! Plus shipping to Gera and vehicle registration document: €200 net Images are for illustration purposes and may show optional equipment subject to a surcharge. Haven’t found the right trailer yet? Redpfork Iu Eex Agtst We permanently have 50–100 vehicles in stock and ready for immediate pickup. Our workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist for axle repairs, including for caravan trailers. Large selection of rental trailers. We also have an extensive range of spare parts and accessories for trailers of all makes. Get advice by phone, visit our website, or stop by in person.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-13, lastna masa: 383 kg, največja dovoljena obremenitev: 1.617 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.760 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS PL 276 150 2000 2 Internal dimensions: 276cm x 150cm Sidewall height: 30cm Loading platform height: 65cm Gross weight: 2000kg Payload: 1617kg Braked tandem trailer Overrun and handbrake by KNOTT 2x 1350kg axles with brakes Low-chassis construction Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks Folding and removable on all sides 15mm thick, non-slip and robust phenolic plywood floor Automatic jockey wheel with 400kg support load 8 noise-dampening lashing eyes with 800kg tensile strength Reinforced 13" C-type tyres with steel valve M+S tyres Net/rope hooks on the frame 13-pin plug Front LED marker lights Rear lights with reversing light, rear fog light, and triangular reflector OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - Equipment for 100km/h approval (shock absorbers) - Spare wheel with holder - Without sideboards (discounted price) - Sideboard height increase to 35cm - Black Edition (powder-coated sidewalls and rims in black) - Loading ramps - Steel plate on floor - Complete LED lighting - Anti-theft device - Net, fine or coarse-meshed - H-frame - Mesh sides in various heights, also closed - 30cm extension sideboards with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm or 180cm More accessories available on request! Plus shipping to Gera and vehicle registration documents: €200 net Pictures are exemplary and may show optional accessories subject to an extra charge. Haven’t found the right trailer yet? We have 50–100 units permanently in stock and ready for immediate pickup. The workshop is open weekdays from 8:00 to 17:00 for all kinds of repairs. Specialist for axle repairs, including caravan axles. Large fleet of rental trailers. We also have a large range of spare parts and accessories for trailers of all makes. Rsdpeghpcdofx Agtst Get advice by phone, visit our website, or come by in person.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Pressing force: 1000 kN / 100 t, ram stroke: 200 mm, max. operating pressure: 290 bar, control system: DNC70, safety distance: 166 mm, overrun time: 104 ms, overrun distance: 7 mm. Rjdpfjwcz Axsx Agtet

Stanje: rabljeno, prevoženi kilometri: 316.423 km, moč: 120 kW (163,15 KM), prva registracija: 05/2010, vrsta goriva: dizel, skupna masa: 5.000 kg, barva: bela, vrsta prenosa: mehanski, število sedežev: 2, Leto izdelave: 2010, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, je imel nesrečo, FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ FOR RENT ++ FOR SALE ++ Internal reference: #543 Mercedes Benz Sprinter 516 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Jetting Unit Fitted with: * Power take-off from Sprinter * Pratissoli KF3 high-pressure pump * Automatic pressure regulation * Pressure control and safety valve * 1st hydraulic high-pressure hose reel for approx. 120m DN13 * 2nd hydraulic high-pressure hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 L water tank Redpsxc S Atjfx Agtot * Bypass system * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage compartments * Vice * Wooden floor with coating, side walls clad with aluminum chequer plate Special Equipment: 13-pin trailer socket, 100 Ah battery, additional (reinforced) battery, digital tachograph, 180 A alternator, transmission lock for PTO, rear doors (opening angle 270 degrees), PTO 2B with intermediate shaft, programmable special module, radio pre-installation, spare wheel with operational tyres, spare wheel mount under frame end incl. jack, driver’s cab seats: comfort air-sprung seat (driver’s side), reinforced rear stabilizer, reinforced front stabilizer, fuel sender for auxiliary heating, separator relay for additional battery, prep for additional heat exchanger, pre-installation for transmission oil cooling, auxiliary heater Further Equipment: Third brake light, adaptive brake light, driver’s airbag, washer fluid level indicator, both door mirrors electrically adjustable and heated, mirrors with integrated turn indicator, brake assist, braking system with ABS+ASR, roof lining in driver’s cab, lockable glove compartment, body type: high-roof panel van standard, child safety locks, main fuel tank: 75 L, full-length load compartment partition, load securing/tie-down rings, headlight range adjustment, engine 2.1L – 120 kW CDI CAT, wheelbase 3665 mm, smoker’s package, low-emission Euro 5, sliding door right side load/passenger compartment, seat upholstery: Lima fabric, passenger seat adjustable, Assyst maintenance interval display, heat-insulating glazing, permissible total weight 5.00 t, twin wheels on 2nd/rear axle Please contact us directly for further details and/or pictures. A wide selection of additional vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively under our general terms and conditions and with the exclusion of any warranty.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: omejena funkcionalnost, skupna masa: 150 kg, Grundfos electronically controlled dry-runner pump TPE 100-250/2-S A-F-A-BAQE-ND1, single-stage inline pump, Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA motor We offer the Grundfos electronically controlled dry-runner pump. ⭐︎ Condition: good (used) The electronically controlled dry-runner pump is used but fully operational. The pump was working flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Nominal flow rate: 135 m³/h Nominal head: 20.1 m Mechanical seal: BAQE Pump casing: cast iron Impeller: cast iron Gross weight: 157 kg For further details, please refer to the nameplate. Scope of delivery as shown in the pictures. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Rjdpsyc T Apefx Agtot Shipping possible, buyer pays shipping costs. Single-stage volute pump with opposite-sided suction and discharge nozzles in inline design. The suction and discharge nozzles have the same diameter. The pumps are designed according to the top-pull-out principle, meaning the pump head (motor, head piece, and impeller) can be easily removed for maintenance or servicing while the pump casing remains in the piping. The pump is equipped with a non-balanced rubber bellows seal. The mechanical seal complies with EN 12756. Pipe connections via DIN flanges PN 16 in accordance with EN 1092-2 and ISO 7005-2. The pump is fitted with a fan-cooled permanent magnet synchronous motor. The motor efficiency meets energy efficiency class IE5 as per IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated in the motor terminal box. The electronic speed control allows continuous adjustment of the motor speed and thus the pump performance to actual requirements. The pump is equipped with a differential pressure sensor.

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Rjdpfxelqac So Agtst Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. This also depends on tool lengths, machining lengths on the component, etc.

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, skupna masa: 160 kg, Thermolift 100-2 podjetja Arburg na prodaj, 8 kosov. Cena velja za kos. Thermolift 100-2 Sušenje granulata Prostornina sušilnega lijaka: 100 l Ogrevalna moč: pribl. 4,5 kW Pretok zraka: pribl. 90 m³/h Višina dviga: do pribl. 3 m Teža: pribl. 150 kg Rodoyh Hypspfx Agtjt 100 litrov Ogrevanje: 4,5 kW Ventilator: 1,7 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Air-operated double-acting high-pressure pump The Resato P200-100-2 is an air-operated, double-acting high-pressure pump designed for generating liquid pressure in a variety of industrial applications such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump operates on the principle of an automatically reciprocating differential piston to convert compressed air into high-pressure liquid flow. Manufacturer: Resato Model: P200-100-2/U/V Type: Air-operated, double-acting high-pressure pump Air piston diameter: 200 mm Pressure ratio: 100 Flow rate: 6.6 l/min Weight: 21 kg Year: 2019 Maximum outlet pressure Regulated by air supply pressure; with 7 bar (100 psi) air pressure, the static final pressure reaches up to 700 bar (~10,000 psi) (according to the Resato specification sheet for P200-100-1/P200-100-2). Compatible media Suitable for water, oil, or an emulsion of both. Also capable of handling a wide range of chemical liquids. Materials (wetted parts) All wetted components are made from specially selected stainless steel. Operating medium (drive) Can be operated with compressed air or nitrogen at a maximum pressure of 7 bar (100 psi). Features Reduced noise levels, minimized downtime due to easy maintenance of seals and check valves, pump freezing is avoided. Rsdpfxeyk Uc Hj Agtot Applications The P Series, including the P200-100-2, is used across various sectors, including the oil & gas industry, automotive, and research. Typical areas of application include: - Hydrostatic testing of hoses, valves, pipelines, and pressure vessels. - Pressurization of hydraulic objects. - (Chemical) injection. - Dismantling bearings and bolt tensioning. - Research and development. More items—new and used—available in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Wilo DL-E 100/145-11/2-S1 Dry-Running Twin Pump Dry-running twin pump of inline design for installation in pipelines or on a baseplate with integrated frequency converter for electronic control, including constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in inline construction with flange connection and automatic power adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, chilled water, and cooling systems. Features/Functions Operating Modes - Δp-c for constant differential pressure - Δp-v for variable differential pressure - PID control - Manual operation (n = constant) Manual Operation Level - Setting the differential pressure setpoint - Setting the speed (manual mode) - Selecting the operating mode - Pump ON/OFF control - Configuration of all operating parameters - Fault acknowledgment External Control Functions - Control input "Priority Off" - Control input "External pump changeover" (only effective in twin pump mode) - Analog input 0–10 V, 0–20 mA for manual operation (DDC) and remote setpoint adjustment - Analog input 2–10 V, 4–20 mA for manual operation (DDC) and remote setpoint adjustment - Analog input 0–10 V for actual value signal from pressure sensor - Analog input 2–10 V, 0–20 mA, 4–20 mA for actual value signal from pressure sensor Signal and Display Functions - Collective fault signal (SSM) - Collective operating signal (SBM) Data Exchange - Infrared interface for wireless data transfer with IR monitor/IR stick - Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation systems Safety Functions - Full motor protection with integrated release electronics - Access lock - Twin pump management (twin pump or 2 x single pump) - Main/standby operation (automatic fault switch-over) - Main/standby operation pump changeover after 24 hours - Addition mode - Addition mode (efficiency-optimized peak load connection and disconnection) Your Benefits - Energy savings via integrated electronic performance adjustment - Simple operation with Green Button Technology and display - Various operating modes: main/standby operation and parallel operation - Configurable error behavior tailored for heating and HVAC applications - Integrated motor full protection (KLF) with release electronics Drive - Power supply: 3~380 V, 50/60 Hz; 3~400 V, 50/60 Hz; 3~440 V, 50/60 Hz - Motor efficiency class: IE4 - Maximum power consumption P1 max: 13,000 W - Motor rated power P2: 11 kW - Maximum current Imax: 21 A - Maximum speed nmax: 2,970 rpm - Emission: EN 61800-3 - Immunity: EN 61800-3 - Insulation class: F - Motor protection class: IP55 - Motor protection: KLF integrated Installation Dimensions - Installation length L0: 500 mm - Suction side pipe connection DNs: DN 100 - Pressure side pipe connection DNd: DN 100 RRP: €29,006.25 Rsdpfowbqrtex Agtst Financing through our bank is also available. komplett-konzept.leasingo.de Find more new and used items in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 1971, Tlak 100 t Razdalja med stebri 400 mm Hod 20 - 140 mm Vpenjalna površina mize 900 x 710 mm Rsdpfx Agsxuv Htotjt Površina bata 560 x 450 mm Nastavitev bata 80 mm Vgradna višina 470 mm Število hodov 70 hodov/min Skupna potrebna moč 10,5 kW Teža stroja pribl. 9 t Dimenzije stroja D x Š x V 1,98 x 1,60 x 3,10 m

Leto izdelave: 1988, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponudba vključuje: Vhodni transportni trak znamke Herbold Detektor kovin znamke S&S Rjdpfx Ageygv Uistot Rezalni mlin znamke Herbold z 8, 10, 12 mm motornimi siti Odsesovalni ventilator 7,5 kW iz Hardoxa Sistem za odpraševanje s ciklonom in celično zaporno loputo za ločevanje finih delcev iz mletega materiala Transportni ventilator za polnjenje Big Bagov Postaja za dva Big Baga s pnevmatskim preklopom Komandna omara z zaščito pred preobremenitvijo

Stanje: dober (rabljeno), Manufacturer: Thurm Rodpomw Uncjfx Agtjt Type: B 20 R 100 L 4-2 HL H STR Motor number: 12618430011409 Power: 3.7 / 4.4 kW Speed: 1,425 / 2,890 rpm Shaft length: Shaft diameter: Weight: 48 kg Dimensions: Motor from Deckel FP3A CNC milling machine, Machine number 2206 - 0443

Stanje: pripravljen za uporabo (rabljen), Nord SK71L/8-2 geared motor with SK12063AZ-71L/8-2 gearbox, SN: 201892085-100, used, in good condition, fully functional, scope of delivery as per photos. Rjdpfx Aet Rmztsgtet

Stanje: novo, Pressure: 100 t Stroke: 380 mm Rjdpfoi A S I Sox Agtot Table surface working width: 1100 mm Pressure: 258 bar Oil capacity: 46 dm³ Approach speed: 7.54 mm/sec Working speed: 2.47 mm/sec Return speed: 9.06 mm/sec Total power requirement: 2.2 kW Machine weight approx.: 970 kg Cylinder internal diameter [mm]: 220 Piston rod diameter [mm]: 90 Piston bottom diameter [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Hydraulic system with two speeds - Height-adjustable work table - Joystick for up/down piston movement - Hand pump for precision work The 100 ton hydraulic press features a movable cylinder (left-right) and a height-adjustable work table. Additionally, it is equipped with pressure regulation, two speed settings, a joystick, and a hand pump for precision pressing.

Stanje: rabljeno, Three-phase electric motor Rodpfsd Ty A Hex Agtot - Manufacturer: Lenze, Type: GFT 100-2 (0.6 kW, 800 rpm) - Power output: 0.6 kW - Speed: 800 rpm - Lenze fan: S2E 170 (0.05 kW, 2500 rpm) - Shaft dimensions: Ø x L 28 x 60 mm - Design: B3 - Dimensions: 710 x 260 x H 200 mm - Protection class: IP54 - Weight: 31.5 kg

Stanje: rabljeno, Cold conductor relay, contactor, solid-state contactor, relay, fiber optic converter - Manufacturer: Phoenix Contact, DIN rail power supply .: 29 38 73 0 - Model: MINI-PS-100-240 AC/24 DC/2 Rjdpsf Rum Njfx Agtot - Price: per unit - Quantity: 4 units - Dimensions: 100 x 45 x H110 mm - Weight: 0.3 kg

Stanje: rabljeno, Three-phase electric motor - Manufacturer: ZP, Electric Motor Type 100 - Power: 3.3/2.6 kW - Speed: 2,800/1,400 rpm Rsdpfx Agjr U Sfkstet - Shaft: Ø 24 x 50 mm - Mounting type: B5 - Dimensions: 355/235/H200 mm - Weight: 24 kg

Stanje: rabljeno, Inductive conductivity transmitter, conductivity transducer, conductivity measurement - Manufacturer: E+H Endress + Hauser, conductivity transmitter - Model: Conducta XR 2 -100434-0100 - Measuring range: 0 to 100 % Rjdpfx Agsldk I Djtjt - Voltage: 220 V 50/60 Hz - Dimensions: 180/95/H95 mm - Weight: 0.8 kg