Brinox Gmp Cip-Naprava + 200 L Vmesna Posoda nakup rabljenega (79.593)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, High-pressure cleaning unit, high-pressure jetting unit, high-pressure built-in jetter mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Similar to PTC Salmon, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760 x 1,250 x 1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670 x 1,250 x 1,200 mm Unladen weight without water tank: approx. 370 kg Unladen weight with 400l water tank: approx. 400 kg Unladen weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max output: 26 HP (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, RPM measurement, generator, and glow plugs - Emergency stop button ELECTRIC OPERATION: Bedpsiky H Sefx Altowr - Hydraulic hose reel wind/unwind; - Bypass on/off; - Engine speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low-water protection to prevent the high-pressure pump from running dry, with automatic shut-off. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, pressure control valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine ON/OFF; - Bypass ON/OFF; - Engine speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to hydrants; - UNI 45 kit; - Version with 2 high-pressure hose reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint, and quick coupling; - High-pressure lance kit with flat jet nozzle 15° / rotating nozzle; - Lance kit for increased flow; - Rotating nozzle kit; - Double-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, volumenski pretok: 3.400 m³/h, raven hrupa: 71 dB, skupna masa: 425 kg, premer povezave za izpihovanje: 200 mm, nazivni pretok: 3.400 m³/h, negativen tlak: 2.900 Pa, največja hitrost vrtenja: 3.000 obr/min, Hierbij bieden wij onze mobiele afzuigsysteem van Höcker Polytechnik, model VACUMOBIL 200, bouwjaar 2014, te koop aan. Fabrikant: Höcker Polytechnik Model: VACUMOBIL JT200-L JT = jetreiniging (filterreiniging met perslucht) De JT-versie is een verbeterde versie van de VT-versie (trillingsreiniging). De JT200-L is ideaal voor continu gebruik (CNC, schaaflijn, nesting) Betere continue werking Minder onderhoud bij intensief gebruik Bodpeygw Iqefx Altowr Type ingangsstroom: driefasig Negatieve druk: 2.900 Pa Volumestroom: 3.400 m³/u Totaalgewicht: 425 kg Ingangsspanning: 400 V Aanzuigaansluiting: 200 mm Vermogen: 4 kW Toerental (max.): 3.000 tpm Ingangsfrequentie: 50 Hz Wij verkopen ook ons model JT300-L op Machineseeker. Als u vragen heeft of meer informatie wenst, aarzel dan niet om ons een bericht te sturen of ons te bellen.

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4514927-4514928, Printed manuals are available for both the SLAU 80-60 packaging machine and the TR 65-150 shrink tunnel. Automatic "L"-sealer packaging machine, ULMA brand, SLAU model, with shrink tunnel, designed to package all types of products using either shrink or non-shrink film, achieving outputs of up to 45 cycles/minute. Highly versatile machine: its simple adjustment settings enable quick adaptation to different products to be packaged. Seamless packages are obtained at both the top and bottom of the product, ensuring excellent product visibility whether shrink-wrapped or not. The SLAU has been specifically engineered for frequent format changes and is equipped with systems that allow all size adjustments to be performed easily and quickly, without the need for additional tools. Automatic in-line feeding by means of a conveyor belt, with product separation and alignment, and manual conveyor width adjustment. Motorised 90° film unwind with mechanical perforation system and film end detection. Manually adjustable forming triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD – with nichrome wire; OPC – with heated blade or clamp for PE film. The latter two options feature electronic temperature control. Pneumatically operated three-position jaw opening adjustment, allowing increased throughput for lower-height products. Sealing head equipped with safety end components to prevent products from becoming jammed in case of obstacles during product transfer. Belt closing system facilitates the passage of small and/or unstable products. Sealing centre adjustment by means of jaw elevation. Easy-access automatic scrap film winder with film break detector. Function and parameter control and adjustment via programmable PC. Bwsdpfx Aoykqhfjlter Robust frame made of painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full access to all components. Ventilated electrical cabinet. Protections and safety systems in accordance with CE regulations. Available in painted and stainless steel versions. ULMA TR 65-150 hot air shrink tunnel, designed for shrinking film around products exiting side-seal, bundling, flow-pack, overlap, or similar packaging machines. High calorific performance tunnel with low energy consumption and minimal heat loss. Sturdy frame built from painted, welded steel. Easy to integrate into existing lines. Wheels and height-adjustable feet. Right-to-left product flow. Electronic control of temperature and conveyor speed. Homogeneous distribution system for hot air flow inside chamber assures significant energy savings. Maximum insulation to reduce heat loss.

Leto izdelave: 2024, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Technical Description: The system is designed for weighing standard trolleys. The trolley is pushed into the system. By pressing a button, the free lift and weighing process are activated. The free lift is driven by a motor. In combination with the bending beam load cell and the weighing terminal, the weight can be read from the display and forwarded to the existing DMS or ERP system. If required, the recipe scale can be equipped with rollers as a mobile version. The system can be fitted with all common weighing terminals. • Stainless steel base frame in hygienic design • 1 drive unit • Push button • Shafts, bearings Bwsdpfx Alottv Dfjtsr • Height-adjustable feet (alternatively mobile version) • CEE plug

Leto izdelave: 2013, stanje: delavnici obnovljeno (rabljeno), Nagibni kuhalni kotel Getinge model M4. Naprava po generalnem remontu. Prostornina 200 l, moč 35 kW, 400V. V ponudbi tudi kotli s prostornino 150, 200, 300 l. Bwedoy Rhu Dspfx Altor

Stanje: zelo dobro (rabljeno), SHIPPING AVAILABLE 🚚 Bjdpfxsv Ta H Eo Altowr - Brand: Graco - Reference: 226942 - General industry use - Applications: Painting, Adhesion, Sealing, PVC, Joints, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 15.1 l/min - Maximum working pressure: 12.4 bar - Maximum air inlet pressure: 12.41 bar - Pressure ratio: 1:1 - Fully overhauled second-hand unit - 1-year warranty - Shipping or in-store pickup available - 21% VAT NOT included - VAT INCLUDED. VAT refund available for companies registered in VIES or with TAX ID

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 0841412556, Offener Milchkühltank FRIGOMILK G1, 200 Liter, 2 Melkgänge SERIENNUMMER: 0841412556 TECHNISCHE DATEN HERSTELLERANGABEN: - Innenbehälter und Außenverkleidung aus Edelstahl AISI 304, auf Rollen; - maximales Volumen 212 Liter, Nennvolumen 200 Liter; - Durchmesser 784 mm; - Gesamthöhe 1800 mm; - Gesamtgewicht 77 kg; - Spannung 1230 V; - Max. Druck: 14 bar; - Hochdruckseite: 28 bar; - Nennleistung: 0,82 kW; - Kompressorleistung des Kühlaggregats: 0,5 PS; - Primärfläche des Trapcold™-Laserschweißverdampfers für höchste Effizienz. - Extra starke, umweltfreundliche und leistungsfähige Polyurethanschaum-Isolierung. - DN50 Auslauf – Schmetterlingsventil inklusive. - Millimetergenauer Edelstahl-Peilstab zur Direktablesung des Milchpegels in Litern. KÜHLSYSTEM: - Vereisungsfrei, kühlt auch bei geringem Füllstand; - Direktexpansion; - Kältemittel R404A; - Edelstahlgehäuse. - Kompakt und einfach zu installieren. ELEKTRISCHES SYSTEM: - FIPO 0 elektronischer Milch-Controller; - Temperaturkontrolle und Anzeige der Milch; - Rührwerk-Programm; - Anschlusskabel mit genormtem Stecker (männlich), 380 V; - Edelstahlellenbogen; - 60 Hz Netzfrequenz. Sehr guter technischer Zustand. Nur für rumänische Unternehmen besteht die Möglichkeit des Ratenkaufs, Anzahlung erforderlich. Preis: 2.300 Euro + MwSt., verhandelbar, FCA: Oradea/Rumänien. Bedpfx Aljild N Rjtewr Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Leto izdelave: 2017, obratovalne ure: 1.052 h, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclical mold temperature regulation. It is equipped with a tool-close valve switching unit (piston accumulator) to supply the piston inserts with water up to 200°C. PURCHASE PRICE of the system: €67,000 + water hoses. The system will be inspected at Technotrans (GWK) before sale. More technical details about the "vario" temperature control unit available upon request. The complete system consists of: - Medium: water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect Bsdpfx Ajyxgnfoltswr - Cooling capacity: 280 kW - 1x 2-circuit vario system wh200 (cyclical temperature control of mold inserts) - 1 tool-close valve switching unit - 1 piston accumulator - 1 electronic control unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection package (optional, surcharge applies) - and much more...see photos

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 27 reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Free shipping: 10-day delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ Bwjdpjfvqixefx Altsr ✨Sandblasting Set with Pressure Vessel✨ ⭕ Outdoor sandblasting, indoor sandblasting, and applications where mobile sandblasting machines powered by compressed air are used. ⭕ Pressure Sandblasting Vessel Technical Specifications: ✔ Working pressure: 7 bar ✔ Abrasive type: Steel grit, steel shot, garnet, glass bead (glass sand), etc. ✔ Air consumption: see table below for L/min values. ❓What is a pressure sandblasting vessel?❓ ✨A pressure sandblasting machine is a type of sandblasting equipment that can be deployed as a mobile unit for blasting non-portable surfaces (e.g., buildings, large steel structures) outdoors. Sandblasting rooms can also be used for blasting large components. Since it operates with compressed air, a compressor is required. ✨At Proton, we offer standard sandblasting vessels in 50 L, 100 L, and 200 L capacities. In addition, we can supply blast vessels in various sizes according to your requirements. ✨All spare parts and accessories are available from our company. We offer sandblasting helmets, sandblasting gloves, sandblasting hoses, and boron carbide blasting nozzles to ensure the operator is not affected by the surrounding environment. ⚡️Typical Applications of Sandblasting Vessels⚡️ This system is used to achieve the required surface profile prior to painting and coating, and in areas where cleaning and decorative finishes are desired. Main applications include: shipbuilding, foundry industry, automotive, marble, textile, glass, pipe, fabrication, and assembly industries. ✳️Standard blast vessel sets are supplied with the following equipment:✳️ SAND BLASTING VESSEL 200 L ►1x blasting control valve ►1x remote control valve ►1x quick silencer ►1x water separator regulator ►1x remote control handle ►1x abrasive flow diverter "Y" fitting ►1 set quick-connect couplings ►20 meters blast hose ►40 meters dual pneumatic hose ►1x 8 mm Venturi nozzle ►1x 39 mm nozzle holder (MHE-1) ►1x sandblasting helmet ►1x coverall ►1 pair gloves ►1x sandbag ►1x air supply manifold with 2 outlets ►20 m breathing air hose and coupling sockets ❗❗❗ Recommended Compressor Specifications for Sandblasting Vessel Motor power: 37 kW - 50 HP, Airflow: 6.25 m³/min, 7-8 bar pressure. A compressor with these features is required. It is recommended to use a screw compressor. ❗❗❗

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CIP Installation Westfalia Separator AG CIP Installation Westfalia Separator AG | Tank, Pump, Heat Exchanger System Type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group Complete CIP (Cleaning In Place) system from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of technological lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, circulation pumps, GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the installation: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs.) Serial Numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High heat exchange efficiency in CIP solution preparation process 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for operation control and system monitoring 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Bwodoxtvb Uepfx Altsr Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separatoren AG CIP installation is a complete solution for cleaning process systems, providing: - high process hygiene, - control of cleaning parameters (temperature, flow, time), - the possibility of integration with dairy, food, or beverage production lines. The use of components from brands such as GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Na voljo je mobilna odsesovalna in filtrska naprava Höcker. Filtrski razred: H3, moč motorja: 4kW, sesalna šoba: 200mm, filtrirna površina: ca. 12m², maks. volumenski pretok: 3400m³/h, maks. podtlak: 2700Pa, volumen zbirnega posode: 350l, dimenzije stroja (D/Š/V): ca. 2000mm/1100mm/2000mm, teža: ca. 420kg. Možen je ogled na lokaciji. Bwjdpfx Aloyg Nu Notjr

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 1 h, - High-pressure cleaners PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam, similar but not Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection Bjdpfefh Skajx Altewr The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Incl. 10 m high-pressure hose, spray gun, lance and 25° flat jet nozzle

Stanje: novo, Nerabljen vertikalni mešalni rezervoar proizvajalca Langields s prostornino 7766 l. Izdelava rezervoarja iz zlitine Nikelj 200 (BS3072N11). Dimenzije rezervoarja: premer 1950 mm x dolžina ravne stene 1950 mm. Zgornja in spodnja elipsoidalna, varjena dna. Rezervoar je namenjen delu pri tlaku do 18,35 bar in temperaturi do 200 °C. Rezervoar je opremljen z nameščenim zgoraj, dvonivojskim, lopatičnim mešalom s privijačenimi lopaticami. Pogon preko menjalnika z regulacijo obratov, električni motor 3 kW. Mešalo ima dve mehanski gredi tesnili in temperaturna senzorja. Rezervoar je montiran na štirih nogah iz ogljikovega jekla. Bwedpfx Alozbt U Netjr

Stanje: dober (rabljeno), Tlak 11 bar Bwjdjg A Hc Hopfx Altor Prostornina 1500 litrov

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, High-Pressure Cleaner PTC Easypower L B, similar but not Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200–700 bar - Flow rate: 13–42 l/min - Engine: Kohler Stage V Diesel 35 HP/26 kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Unladen weight: approx. 260 kg Bodpfx Alofdzy Ujtewr - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Stainless steel covers - Holder for gun with lance - Trolley with 4 industrial wheels, 350 mm - Electric start - Hour counter - Including 20 m high-pressure hose with stainless steel quick couplers, spray gun, lance, and 15° flat-jet nozzle The following models are available: Easy Power L D 16/500 | 16 l/min, 500 bar Easy Power L D 23/350 | 23 l/min, 350 bar Easy Power L D 20/400 | 20 l/min, 400 bar Easy Power L D 30/280 | 30 l/min, 280 bar Easy Power L D 42/200 | 42 l/min, 200 bar Easy Power L D 13/700 | 13 l/min, 700 bar

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CE125 series is an electrically powered high-pressure unit designed for pressures ranging from 200 to 2500 bar and a flow rate of 21 to 240 l/min. The frame is constructed from hot-dip galvanized sheet metal components, complemented by stainless steel side frames. Four rubber feet ensure secure positioning. A lifting eye is provided to facilitate machine transport. Similar in function, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: Bwedpshga Rxjfx Altor ----- 50 Hz - bar - l/min CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and further models: see data sheet and on request. General specifications: ----- Drive motor power: 90 kW (50 Hz) / 90 kW (60 Hz) Voltage: 400V (50 Hz) - 440V (60 Hz) Current: 81A (50 Hz) - 108A (60 Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Mounted in a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotary nozzles, chemical injectors, and a sandblasting kit. Comparable but not identical to machines from Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop General Specifications: ----- Drive motor output: 6.0 kW Bwodpfx Ashf Nakslter Voltage: 400V (50Hz) - 440V (60Hz) Current: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, The CE150 series is an electrically powered high-pressure unit designed for a pressure range from 200 to 2500 bar and a flow rate from 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal components with stainless steel side frames. Four rubber feet ensure secure positioning. A lifting eye facilitates transportation of the machine. Similar, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Bwedpfx Alehga Scstor 50 Hz - bar - l/min: CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 For 60 Hz and other versions, please refer to the datasheet or inquire directly. General specifications: ----- Drive motor output: 90 kW (50Hz) / 110 kW (60Hz) Voltage: 400V (50Hz) – 440V (60Hz) Current: 160A (50Hz) – 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Supplied with standard accessories.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Manufacturer: BRINOX Type: LEP 11 – CIP Skid Year of manufacture: 2020 Version: Pharma / GMP Condition: New, unused, original packaging LEP 11 CS6710 Package 1 Machine type Pharmaceutical CIP unit (Cleaning in Place) as a compact package unit on a stainless steel frame. Application Automated cleaning of process plants, chromatography systems, vessels and piping systems in the pharmaceutical, biotech and chemical industries. Suitable for NaOH, acetic acid, WFI, PW and other cleaning media. Technical Data CIP medium heating capacity: from +5 °C to +80 °C in max. 10 minutes Pump capacity: 1 – 4 m³/h (adjustable) Operating pressure at CIP supply: 1 – 3 bar (adjustable) Measuring ranges: Flow: 0 – 10 m³/h Temperature: 0 – +150 °C Pressure: 0 – 6 bar Design pressure: -0.9 to +6 bar Design temperature: Bedpfx Aeyl Hwljltowr +2 to +95 °C Construction • Compact package unit on stainless steel frame • CIP supply pump as centrifugal pump • Shell-and-tube heat exchanger with leak-proof transfer • Height-adjustable dome feet • Completely drainable design • Maintenance-friendly layout • Industrial heavy-duty construction Material & GMP version • Product- and cleaning-media-contact parts made of stainless steel 1.4435 • Electropolished surfaces Ra ≤ 0.8 µm • FDA-compliant seals (EPDM / PTFE / silicone) • Designed for NaOH 0.3 mol/L at +80 °C • Resistant to acetic acid, WFIH, WFIC, PUW Documentation & Quality • Complete GMP documentation • CE conformity • 3.1 material certificates • Complete welding protocols • Weld seam documentation incl. photo documentation • Pressure and leak tests documented • FAT documentation available • Drainability and final rinse certificates available Condition • New • Unused • Originally packaged • No production hours • Immediately available Special features • Very high thermal cleaning performance • Fully adjustable process operation • Pharma GMP top configuration • High-quality European components • Investment-safe system with complete documentation Location: Germany Inspection possible by appointment

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Primary Precipitation Vessel – 316L – Double Jacket – PED Module G – FAT 2020 – Like New Manufacturer: BRINOX d.o.o. Type: SVMBI-1500 Tag No.: BH6724-BH1001 Package 22 Serial Number: 1003457 Year of Manufacture: 2020 Condition: Like new / unused CE Mark: CE 0036 TECHNICAL DATA Product type: Primary Precipitation Vessel / Process Vessel Nominal volume: 1,500 liters Total volume: 1,785 liters Empty weight: approx. 866 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: Stainless steel Operating pressure vessel: -1 / +3 bar Test pressure vessel: 5.4 bar Operating pressure jacket: as per design Temperature range: -10 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Individual inspection Bwsdpfx Ajykn Iijlter Inspected by notified body 0036 FAT – Factory Acceptance Test (08/2020) The vessel was fully tested at the BRINOX factory as part of a documented FAT. Tests performed included: • Delta ferrite test of weld seams (compliant, no deviations) • Surface roughness test (Ra internal ≤ 0.8 µm, compliant) • Visual inspection of all product-contact surfaces • Pressure testing as specified • Documentation verification • GMP deviation management (non-critical points, fully closed) • Measuring equipment with valid calibration certificate EXECUTION • Double jacket for heating/cooling • Horizontal orientation • High-quality pharmaceutical design • All product-contact areas in stainless steel 316L • Mirror-polished internal surface • GMP-compliant, documented welds • Large manway with swing cover • Multiple clamp and flange connections • Spray ball / CIP connections • Instrumentation prepared (pressure, temperature, sensors) • Insulated jacket with connections • Heavy-duty flange bottom • Lifting lugs and transport configuration • Project build for CSL Behring (Project SPHINX) CONDITION • Never used in production • Direct from project surplus • Internally absolutely as new • No corrosion • No signs of wear • Industrial mint condition • Immediately available DOCUMENTATION Complete project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity • TÜV inspection documents • PED Module-G documentation • Material certificates 3.1 • Welding documentation (WPS/WPQR) • Delta ferrite test reports • Roughness measurement logs • Calibration certificates for measuring devices • GMP deviation reports • Fully signed FAT protocols • Operating and maintenance documentation Documentation is complete and well-structured. • Pharmaceutical active ingredient processes • Precipitation and reaction processes • Buffer and solution preparation • Sterile liquid processing • Biotechnology • GMP-compliant production facilities • High-purity media SPECIAL FEATURE This is a premium BRINOX process vessel manufactured for CSL Behring in genuine pharmaceutical project quality, with full PED Module-G individual inspection, documented FAT 2020 and complete GMP documentation. Not a standard tank – but certified project quality for sterile applications. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Machine description BRINOX Process Plant / CIP Skid Type CS6700 (CS6723) GMP CIP Process Skid 1.4435 Manufacturer BRINOX Process Systems Year of construction 2020 Technical Data Design as a stainless steel process skid in hygienic construction. Conductivity measurement 1–500 µS/cm, analog signal (AI), hygienic connection DN 50. Flow measurement 0–18,000 kg/h, analog signal (AI), connection DN 25, sterile flange DIN 11864-2A. Pressure measuring points −1 to 9 bar and −1 to 15 bar, analog signal (AI), hygienic connections DN 50 and ½", among others DIN EN ISO 228. Temperature measuring points −50 °C to +200 °C, analog signal (AI), connection DN 32, welded according to DIN 11866/A. Bwsdpfjyl H Svex Altsr Limit level sensors, digital (DI), hygienic connection DN 50. Multiple position feedbacks with IO-Link / digital. Pneumatically actuated on/off valves (DO) in stainless steel hygienic design. Product-contacting materials according to EN 1.4435 / 1.4404 (AISI 316L). Documented surface roughness of product-contacting surfaces in the range of Ra approx. 0.3–0.4 µm. Application Hygienic CIP and process skid for pharmaceutical and biotechnological applications. Suitable for cleaning process lines and vessels under GMP conditions. Construction Welded stainless steel skid with orbitally welded piping. Hygienic clamp and sterile connections. Fully instrumented with flow, pressure, temperature, and conductivity measurement. Pneumatic valve technology with digital feedback. Components from renowned manufacturers such as Endress+Hauser, Gemü, Samson, SICK, etc. Clean, GMP-compliant execution. Condition New. In original packaging. Unused. Never installed or put into operation. FAT / Documentation Status Fully documented Factory Acceptance Test performed. Layout drawing review documented. Maintenance and calibration accessibility check documented. Surface roughness inspection documented. Tightness test documented. Sensor calibration documented. Welding documentation fully checked. Complete documentation list FAT plan and FAT report. P&ID diagram. Layout drawings. Material lists for metals and polymers. Material certificates 3.1. WPQR, WPS, welder qualifications. Welding reports and isometric drawings. Calibration certificates for measuring instruments. Surface roughness measurement protocols. Tightness test protocols. EU declarations of conformity for installed components. Operating documentation. Special features GMP-compliant, fully documented manufacturing. High-quality instrumentation. Very low documented surface roughness values. Immediately available. Ideal for pharmaceutical, biotech, or contract manufacturers with high documentation requirements.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, For sale is a fully procured, modular GMP process system for the production of C1-esterase inhibitor (C1-INH) from human plasma. The plant was planned, procured, and FAT-completed from an engineering perspective, but has never been installed or commissioned. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: factory new, original packaging Operating hours: 0 Storage: stored at controlled temperature SCOPE OF SYSTEM (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): – 2 adsorption lines (DEAE / QAE) – 2 intermediate tanks – 2 pigging systems – 2 cooled transfer lines (pipe-in-pipe) – 4 filter press racks – 4 cooling cascades – 4 CIP loops Precipitation PRE: – 3 pre-precipitation tanks (incl. 1,000 L) – 3 main precipitation tanks – 3 CIP stations – 3 multilayer filters – 1 vacuum station Buffer preparation (Bay 2 & 3): – 6 buffer tanks (NaCl, DEAE, QAE buffers) – 6 temperature control skids – 4 media/WFI/CIP distributors LEP 2.3 – Washing & elution solutions: – 2 washing solution tanks (up to 9,000 L) – 2 elution solution tanks – 4 temperature control units LEP 13 – Ammonium sulfate system: – 1 make-up tank (3,500 L) – 2 storage/distribution tanks – Solid material crusher – Dosing & neutralization system – Heat-traced lines Media distribution: – 1 pharmaceutical NaOH 1M system – 1 technical NaOH 32% system – 1 acetic acid 60% system – Pump and dosing stations Additional process vessels: – >15 stainless steel vessels 316L (1,000–9,000 L) – Various skids, distributor and instrumentation units GMP & DOCUMENTATION – URS / specification sheets by LEP – P&ID diagrams – Layout & section drawings – EMSR & instrumentation documentation – FAT documentation Bwjdpfeym Ayfsx Alter – Complete weld seam documentation (digital) – Comprehensive photo documentation The project documentation is available completely in digital form and additionally physically structured in 316 folders. PCS connection with prepared MES interface provided. Cleanroom integration as per specification. SALE Preferably as a complete system. Sale by module possible if a total system sale cannot be realized. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or greenfield projects. Availability: short-term Inspection by appointment Price: on request

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Stainless steel transport container, used and cleaned Capacity: 1 cbm Order number: 3980 Material: V2A 1.4301 Dimensions: 1,226 x 1,026 x 1,856 mm (height) Design: Free-standing in a galvanized steel frame, stackable in two layers Designed for a specific gravity of 1.8 Top with flat lid, equipped with toggle fasteners Fully openable, with one 1" socket in the base Lower section with conical bottom Terminating with a Ø 250 mm opening, with DN 80 flange and lateral DN 80 Kamlock outlet Weight: approx. 250 kg Bedsgayh Dopfx Altewr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Horizontalna peč za konvekcijsko kaljenje stekla. Največje dimenzije stekla: 1500 x 3000 mm Debelina stekla: 4 - 19 mm Napetost: 400 V 50 Hz Krmilna napetost: 230 V AC, 24 V Moč: Bjdpfxoyw Hgro Altewr Ogrevanje: 296 kW Motorji: 262 kW Skupaj: 558 kW Tok: Ogrevanje: 470 A Motorji: 450 A Skupaj: 920 A

Stanje: rabljeno, Tip: Talilnik Notranji premer: 40 cm Uporabna višina: 38 cm Uporabna prostornina: 45 l Zaprta plaščna konstrukcija z vgrajenimi grelnimi elementi: dno + plašč rezervoarja Najvišja dovoljena temperatura rezervoarja: 280 °C Tlak: 4 / -1 bar Pnevmatski izpustni ventil Temperature senzor (T°C) Termični regulator Bwedpfox R Dflex Altor Izolacija Manometer: vpihavanje zraka.