Ambold Peev 40.3 nakup rabljenega (110)

Stanje: rabljeno, skupna dolžina: 780 mm, skupna širina: 600 mm, prebojna odprtina v mizi: 120 mm, The following used clamping plates are available for sale in the listed sizes: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / through hole 130 mm / T-slot 22 Gisdsvcyx Tjpfx Aa Uju No. 13 / 900 x 620 mm / through hole 250 mm No. 14 / 545 x 545 mm / through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available upon request.

Stanje: rabljeno, Wire diameter - max. 10 mm Wire diameter - min. 3 mm Wire length: 8 m Total power requirement: 7.5 kW Gedpfswu Hg Hsx Aa Uoiu Machine weight: approx. 1.1 t Space requirement (LxWxH): approx. 2.53 x 0.75 x 1.1 m

Leto izdelave: 1986, stanje: rabljeno, Pressing force: 15 t Installation height: --- mm Gijdpfx Aefn Apxoa Ueu Strokes per minute: 200 – 2,000 Table surface: --- mm Ram area: 490 x 200 mm Sheet width: 5 – 50 mm Stroke adjustment: 10–30 mm Weight: 3 t Dimensions (L x W x H): 1,370 x 1,200 x 2,200 mm Drive power: 10 kW Pass-through opening in table: 350 x 100 mm Table width: 530 / 210 mm Table length: 530 / 350 mm Only 2 years in operation High-speed model

Leto izdelave: 1979, stanje: rabljeno, Pressure: 75 t Throat depth: 260 mm Godpefn Ap Djfx Aa Ueiu Stroke: 16–80 mm Table surface: 800 x 520 mm Distance table/ram: 350 mm Variable stroke rate: 50–250 strokes/min Ram surface: 400 x 300 mm Ram adjustment: 70 mm Total power requirement: 7.5 kW Space requirement approx.: 2.7 x 1.7 x 2.6 m Machine weight approx.: 4 t Pass-through opening in table: 260 x 180 mm - Pneumatic Ortlinghaus air clutch with auxiliary brake - Infinitely variable speed control via Stöhrer drive - Shear plate - Two-hand operation - Additional clamping plate - Air reservoir tank for clutch - Oil circulation lubrication

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Giodjcubatepfx Aa Ueu Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, Pressure 10 t Stroke 400 mm Downward speed from 200 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 8.5 kW Machine weight approx. 1.3 t Space requirement approx. ... m Giedpfx Aasd R Szuj Usu - without clamping plate - only approved for operations with closed tooling

Stanje: rabljeno, Pressure: 160 t Installation height: 600 mm Stroke: 25 - 150 mm Table area: 1500 x 900 mm Ram area: 1500 x 900 mm Ram adjustment: 100 mm Clearance between guides: 1500 mm Clearance in side stands: 400 x 200 mm Frame width: 1680 mm Machine weight: approx. 15 t Required space: approx. 2.7 x 1.8 x 4.4 m 2003 Modernisation / Retrofit The following work still needs to be carried out on the machine: - New control cabinet with ABB PLC - Separate two-hand control panel with foot switch - Vogel loss lubrication system Gjdpfx Aaocgqvps Uoiu

Stanje: rabljeno, skupna dolžina: 1.100 mm, skupna širina: 700 mm, Used clamping plates are available for sale in the following sizes: No. 10 / 1100 x 700 mm / Through hole 180 x 220 mm / T-slot 28 Gedpjvcyp Sjfx Aa Usiu No. 11 / 1200 x 600 mm / Through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Through hole 250 mm No. 14 / 545 x 545 mm / Through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available upon request.

Stanje: rabljeno, Leto izdelave: 1990, Pressure: 125 t Throat depth: 360 mm Stroke: 8 - 140 mm Installation height (with max. upper stroke and upper ram adjustment): 500 mm Ram adjustment: 100 mm Ram surface: 800 x 400 mm Table surface: 1000 x 720 mm Clamping plate: 990 x 670 mm Gedpfsyatx Eox Aa Usiu Clamping plate thickness: 80 mm Strokes per minute: 60 spm Pin hole (depth x diameter): 90 x 50 mm Total power requirement: 23 A Machine weight approx.: 11 t Space required (W x D x H): approx. 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reversing circuit (return stroke) - Electric stroke counter - Electronic preselection counter - Cam controller The machine is partially overhauled in our workshops as follows: - Disassembled, cleaned, and fully inspected technically - Newly painted (custom colors available on request) - New seals - New control cabinet with touchscreen, incl. machine wiring - Current press inspection

Stanje: rabljeno, Sheet width: 300 mm Coil weight: 400 kg Coil inner diameter: 240 – 640 mm Coil outer diameter: 1000 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m² Double Decoiler, Type MSD 18 (Machine No. 18791): Strip width: 300 mm Coil weight: 400 kg Gjdopflptopfx Aa Ujiu Coil outer diameter: 1000 mm Coil inner diameter: 240 – 680 mm Straightening Machine, Type MR17S60M (Machine No. 18591): Strip width: 100 mm Strip thickness: 0.2 – 1 mm

Leto izdelave: 1971, stanje: rabljeno, Pressure: 160 t Throat depth: 440 mm Stroke: 20 - 120 mm Table size: 1050 x 750 mm Strokes: 42 and 62 strokes/min Ram area: 800 x 500 mm Pin hole (depth x diameter): 85 x 50 mm Pass-through opening in table: 355 mm Installation height (stroke down, ram adjustment up): 455 mm Ram adjustment: 100 mm Machine weight: approx. 11.2 t Gisdecyc Adepfx Aa Uju *with gear train *with fixed work table *with enlarged table and ram area *with enlarged throat depth *with pass-through in the frame *with ram weight compensation The machine is currently being overhauled and the clutch is being disassembled for this purpose. (The press is currently in a disassembled state)

Leto izdelave: 1990, stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Gijdpfxed Nl E Us Aa Uou Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Leto izdelave: 1984, stanje: rabljeno, Pressure 100 t Column width 1000 mm Stroke 150 mm Table area 1000 x 700 mm Distance table/ram 500 mm Blankholder stroke 180 mm Ram area 1000 x 700 mm Ram boreholes x depth 50 mm Strokes per minute 85 spm Pin hole (depth x diameter) 85 x 50 mm T-slots 22 DIN 650 design: diagonal Number of T-slots 2 Sheet width 400 mm Sheet length 1000 mm Giedpfefn Apzsx Aa Usu Required floor space approx. 3.0 x 3.0 x 3.0 m Machine weight approx. 8 t Total power requirement 30.2 kW - Fine stroke adjustment - Shear stroke damping - Oil extraction - 2 cylinders - Roller feed by Dreher, type WAV, control PMS3000 by Dreher - Soundproof cabin - Machine was overhauled in 2001 and fitted with new SIEMENS SIMATIC OP17 control system

Stanje: zelo dobro (rabljeno), Pressure 125 t Throat depth 400 mm Stroke 6 - 125 mm Ram adjustment 100 mm Installation height (stroke bottom, ram adjustment top) 400 mm Table area 1100 x 750 mm Strokes per minute 60 spm Total power requirement 16 kW Machine weight approx. 10 t Required space approx. WxDxH 1.1 x 1.9 x 3.53 m - Machine partially overhauled - Completely disassembled and technically inspected, Godpfjt Eix Rjx Aa Ueiu - New seals - New pneumatic clutch - New seals in the compensating cylinder - New drive motor - New ball screw - New paint finish - Current UVV inspection and brake time measurement Machine safe for manual loading operations At extra cost, we can equip the machine as follows: - Workspace protection with light curtain / cycle operation, but only in combination with a new control cabinet (freestanding) with ABB safety controller and touch panel - Two-hand operation on a separate stand

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Stroke: 200 mm Table area: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram area: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m - Safe for manual loading operations - Conversion to West system - Light curtain Gsdpfxotqm Dgj Aa Ueiu

Stanje: rabljeno, Leto izdelave: 1988, Sheet width 150 mm Coil weight t Coil inner diameter mm Total power requirement kW Machine weight approx. t Space requirement approx. m - Manual decoiler, braked - Without own drive - Manual Gsdpfx Aer Eth Ija Uoiu

Stanje: rabljeno, Leto izdelave: 1995, Sheet width 300 mm Gsdpfsr Hginox Aa Ujiu Coil weight 1.5 t Coil inner diameter 400 - 500 mm Arm length per arm 670 mm Total power requirement kW Machine weight approx. 760 kg Space requirement approx. L 1.23 x W 1.7 x H 1.1 m

Leto izdelave: 1990, stanje: rabljeno, Pressure: 100 t Throat depth: 260 mm Stroke: 300 mm Table size: 500 x 500 mm Ram dimensions: 650 x 500 mm Installation height: 700 mm Oil capacity: 600 l Ejector in table: 40 t Retraction force: 13 t Total power requirement: 22 kW Machine weight: approx. 7 t Space requirement: approx. 2.07 x 2.48 x 3.3 m - Ejector built into the table, pressing force 40 t, stroke 100 mm - Sideways movable work area guarding with light curtain (BWS), equipped for intermittent operation - Cooling unit behind the machine: accumulation water tank (beige), air cooler (grey-blue), including complete piping and control systems, etc. Gsdpjb U Hvasfx Aa Ueiu - Press is safe for unrestricted manual loading operation - Last accident prevention inspection/approval: Nov. 2013 - Documentation available Demonstration under power not possible, sale as is, no known defects, press should also be recommissioned by qualified personnel due to the control system.

Leto izdelave: 1977, stanje: rabljeno, Pressure: 40 t Outreach: - mm Stroke: 8 - 90 mm Table dimensions: 630 x 430 mm Ram adjustment: 60 mm Maximum stroke rate: 65 strokes/min Total power requirement: kW Machine weight approx.: 2,480 kg Space requirement approx.: m Gjdpsb U Hxfsfx Aa Ujiu - Gear drive - Tiltable - Table clamping plate - Mechanical overload protection in the ram (shear plate) - Pneumatic clutch

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Gedpfx Aovprv Rja Ueiu Stroke: 500 mm Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Stanje: rabljeno, Leto izdelave: 1968, Pressure: 40 t Outreach: 200 mm Stroke: 150 mm Table surface: 600 x 300 mm Clear hole in table, diameter: 140 mm Ram surface: 600 x 300 mm Installation height approx.: 325 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m 2 guide columns Gijdpfeu Dn Shox Aa Uou 2 T-slots in ram and table, transverse orientation

Leto izdelave: 1996, stanje: rabljeno, Material width 150 mm Material thickness 2.5 mm Feed length 485 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Equipment: Control cabinet ETMZ (including valves and intermediate ventilation for automatic and setup operation) Mounting bracket, type BFW 8 Protective cover, type SHE, electrically interlocked Support, type ABS, for long feeds Gedpfxeul D Slj Aa Ueiu

Stanje: rabljeno, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range in mm Gisdsfn Aqmopfx Aa Uou Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. [missing data] Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with hold-down roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, tested, and newly painted.

Stanje: rabljeno, Leto izdelave: 1984,

Stanje: rabljeno, Leto izdelave: 1988, Sheet width 150 mm Coil weight t Coil inner diameter mm Total power requirement kW Machine weight approx. t Space requirement approx. m - motor-driven - loop control via sensor Gijdor Eth Djpfx Aa Uju - manual expansion - on base plate