Zoller Zoller Smc 4/4-00060 nakup rabljenega (59.622)

Stanje: rabljeno, prevoženi kilometri: 223.000 km, prva registracija: 01/2019, vrsta goriva: dizel, skupna masa: 31.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 01/2027, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: klimatska naprava, * MAN TGS 31.420 8x2 smetarsko vozilo * Euro6C * Avtomatski menjalnik * Zöller Medium ASF X2 29 Pgsdpfx Aoyx R Ebogxsk * Zöller Delta Lifter 2301 * Prostornina 28,7 m³ * Kamera za vzvratno vožnjo * Sistem za pomoč pri zavijanju * Tempomat * 3-sedežna kabina * Klimatska naprava * Električni pomik stekel

Stanje: rabljeno, prevoženi kilometri: 167.500 km, moč: 129 kW (175,39 KM), prva registracija: 10/2016, vrsta goriva: dizel, lastna masa: 5.905 kg, največja dovoljena obremenitev: 1.585 kg, skupna masa: 7.490 kg, velikost pnevmatike: 205/75R17.5, konfiguracija osi: 4x2, barva: oranžna, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, Oprema: ABS, dodatne luči, kabina, klimatska naprava, meglenke, nadzor oprijema, računalnik na krovu, servovolan, Lokacija vozila: Bovenden, tip karoserije: Hiša, dvojna sedežna klop, električno okno levo, električno okno desno, klimatska naprava, ABS (protiblokirni sistem), regulacija zdrsa pogona (ASR), avtomatski menjalnik, meglenke, listnato vzmetenje, stranska aluminijasta zaščita, ekološka nalepka zeleno. Nadgradnja: Vozilo za zbiranje smeti z nadgradnjo Zöller tip Micro XL približno 7 m³ in Zöller naprava za praznjenje 0359. Vozilo je trenutno registrirano za dovoljeno skupno maso 8.550 kg, teža se lahko kadarkoli ponovno zmanjša! Potrebna so servisna dela v vrednosti približno 3.000 €! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake so pridržane! Podew Spckspfx Agxjgk

Stanje: rabljeno, prevoženi kilometri: 245.872 km, moč: 240 kW (326,31 KM), prva registracija: 02/2015, vrsta goriva: dizel, lastna masa: 16.100 kg, največja dovoljena obremenitev: 9.900 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.200 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: polavtomatski, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 3, skupna dolžina: 10.300 mm, Oprema: ABS, centralno zaklepanje, klimatska naprava, nadzor oprijema, tempomat, zapora diferenciala, Faun Power II 524 V19 št. 524117 Zöller Nezavezujoča ponudba – spremembe in vmesna prodaja pridržane – prodaja poteka brez kakršnega koli jamstva – vsi podatki brez jamstva! Pgjdpfoxpgvhsx Agxsk

Stanje: rabljeno, prevoženi kilometri: 193.381 km, moč: 240 kW (326,31 KM), prva registracija: 03/2017, vrsta goriva: dizel, lastna masa: 15.120 kg, največja dovoljena obremenitev: 10.880 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, medosna razdalja: 4.200 mm, naslednji pregled (TÜV): 08/2026, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 9.500 mm, Oprema: ABS, filter saj, klimatska naprava, nadzor oprijema, sistem za imobilizacijo, tempomat, zapora diferenciala, Faun Vario 524 št. 527433 Zöller 2301 120/240/1100 Nezavezujoča ponudba - pridržujemo si pravico do sprememb in vmesne prodaje - prodaja poteka brez kakršnekoli garancije - vse informacije brez garancije! Pgedpswftazofx Agxok

Stanje: rabljeno, prevoženi kilometri: 81.819 km, moč: 90 kW (122,37 KM), prva registracija: 12/2014, vrsta goriva: dizel, lastna masa: 4.750 kg, največja dovoljena obremenitev: 2.250 kg, skupna masa: 7.000 kg, konfiguracija osi: 4x4, medosna razdalja: 2.750 mm, zavore: zaviranje z motorjem, barva: oranžna, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 2, skupna dolžina: 4.250 mm, obratovalne ure: 7.122 h, Oprema: ABS, klimatska naprava, pogon na vsa štiri kolesa, Zöller Micro HG 4,5 št. 1405095001 120/240/1100, štirikolesni pogon in štirikolesno krmiljenje, klimatska naprava, vzvratna kamera, zapora diferenciala, nezavezujoča ponudba – spremembe in vmesna prodaja pridržane – prodaja poteka brez kakršnega koli jamstva – vsi podatki brez jamstva! Podexzt Unspfx Agxegk

Stanje: rabljeno, prevoženi kilometri: 142.921 km, moč: 129 kW (175,39 KM), prva registracija: 03/2011, vrsta goriva: dizel, lastna masa: 5.720 kg, največja dovoljena obremenitev: 1.770 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 3.450 mm, zavore: zaviranje z motorjem, barva: oranžna, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 6.880 mm, Oprema: ABS, klimatska naprava, nadzor oprijema, zapora diferenciala, Zöller Micro XL7 A0001842 Zöller. Posoda 100 l, Emisijski standard: EEV. Nezavezujoča ponudba – spremembe in vmesna prodaja pridržane – prodaja izključuje kakršno koli jamstvo – vsi podatki brez garancije! Psdpfx Agexn Tm Rjxjgk

Stanje: novo, prevoženi kilometri: 232.115 km, prva registracija: 04/2009, vrsta goriva: dizel, gorivo: dizel, emisijski razred: Euro 5, Leto izdelave: 2009, Oprema: ABS, EBS (Elektronski zavorni sistem), elektronski program stabilnosti (ESP), klimatska naprava, tempomat, = Dodatne opcije i oprema = - Kontrola stabilnosti = Napomene = = Dodatne opcije i oprema = - Motorna kočnica = Napomene = Iveco Magirus 260 S42 kamion za smeće UMLEERER 60 lit - 5 m³ sa Zöller Medium XXL 24 nadogradnjom i MOBA vagom • Klimatizacija • Motorna kočnica • Tempomat • Diferencijalna blokada • Kočnica za stajalište Podpfxjwmn Rde Agxsgk • Pomoć pri kretanju uzbrdo • Kamera za vožnju unazad • Rotaciona svetla • Krovni otvor • Radio-CD plejer • Multifunkcionalni volan • 3. osovina: upravljiva / podizna! • Dimenzije pneumatika 1. i 3. osovine: 385/65 R22,5 • 2. osovina: 315/80 R22,5 • Stanje pneumatika: ~ 10 mm • Međuosovinsko rastojanje: 4.200 mm • Neto težina: 17.425 kg • Dozvoljena ukupna masa: 26.000 kg • ZÖLLER nadogradnja Medium XXL 24 sa MOBA vagom i štampačem • ZÖLLER LIFTER 356 za kontejnere 60/120/240/1.100 litara – 5 m³ (5.000 litara) - nemačko vozilo! - TÜV / tehnički pregled na zahtev i uz doplatu: NOVO! Greške i prethodna prodaja zadržani! = Dodatne informacije = Oštećenja: nema

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Servomotor, elektromotor, enosmerni motor, servo motor z reduktorjem, sinhronski motor Pedpfsxr A Avex Agxsgk -Proizvajalec: Siemens Wittenstein, servo motor z reduktorjem -Sinhronski motor: Siemens tip 1FK7083-2AF71-1RG0 -Napetost: 308 V -Hitrost: 3000 / max: 6000 vrt/min -Reduktor: Wittenstein SP 100S-MC1-4 -1K1-2K i= 4 -Gred: Ø 32 x 60 mm -Količina: 5x motorji z reduktorjem na voljo -Cena: na kos -Dimenzije: 450/155/V200 mm -Teža: 25,1 kg/kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Servomotor, elektromotor, enosmerni motor, servo motor z reduktorjem, sinhroni motor Pjdpfx Aoxr Ugaegxjgk -Proizvajalec: Siemens Wittenstein, servo motor z reduktorjem -Sinhroni motor: Siemens tip 1FK7042-2AF71-1RG0 -Napetost: 270 V -Hitrost: 3000 / maks: 9000 vrt/min -Reduktor: Wittenstein SP 075S-MC1-4 -1E1-2K i= 4 -Gred: Ø 22 x 35 mm -Količina: 8x motor z reduktorjem na zalogi -Cena: na kos -Dimenzije: 345/96/H140 mm -Teža: 8,2 kg/kos.

Stanje: dober (rabljeno), Guide cylinder, guided pneumatic cylinder, pneumatic cylinder, compact cylinder - Piston diameter: 16 mm - Stroke: 40 mm - Max. pressure: 10 bar - Dimensions: 105/65/H35 mm Pgedpsfdd Auofx Agxsk - Weight: 0.5 kg

Stanje: pripravljen za uporabo (rabljen), Zoller CH-2501 projektor in prosojna osvetlitev za H4000, rabljeno, v dobrem stanju, 100% delujoče, obseg dobave po fotografijah. Psdjx Evcxspfx Agxsgk

Stanje: rabljeno, Leto izdelave: 2014, Použit stroj Leto izdelave: 2014 Oprema in tehnični podatki: - Delovno območje X: 3.740 mm - Delovno območje Y: 1.570 mm - Delovno območje Z: 350 mm - 4. os: prisotna - 5. os: 5-osno vreteno, motor 12 kW - z dodatno blokado C-osi - Mesta za menjavo orodja: 24 s ploščnim menjalcem; 10 na levi strani stroja - Vertikalna vrtalna vretena: 12 - Strojna miza: konzolna miza - Avtomatika pozicioniranja mize: prisotna - 6 delovnih podpor tipa e-motion - Poseben sistem vpenjanja za okvirje - Programska oprema: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 delovni polji za nihajno obdelavo - z avtomatskim centralnim mazalnim sistemom - z mobilnim upravljalnim pultom in PC monitorjem Pgedpox Hllxjfx Agxsk - s klimatsko napravo za elektro omaro - z vakuumsko črpalko 90 m³/h - z ročnim upravljalnikom - Vključeno: 12 vpenjal za okvirje, 8 velikih in 4 srednje vakuumske priseske Razpoložljivost: takoj Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Pgsdpfx Agey Dg N Toxek Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) Pgsdjd Tbbdopfx Agxsk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level. Pgedpfx Aefdkb Tjgxjk

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg Pgjdpfsd Tqalox Agxek - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Psdpfxjfdkb Uj Agxogk - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards Pjdpfx Ageguk A Hexjgk - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Pedpfx Ageguk Dksxogk - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard Pgodpfsfdkbhex Agxok - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg Pgsdpfx Agjguk Dvsxek - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, Pjdpeyz Iccsfx Agxegk vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit Pgodpfx Ageu R S Nwsxsk x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Podpfoy Ehnasx Agxsgk Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.