Zett-Mess Stroj Za Merjenje nakup rabljenega (95.994)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2019, Funkcionalnost: nepreverjeno, številka stroja/vozila: 71267, skupna širina: 500 mm, skupna dolžina: 500 mm, skupna višina: 500 mm, skupna masa: 20 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Merilni volumen: 1.200 mm Natančnost: 0,015 mm Pgodpfszb A Dtox Amfer PODROBNOSTI STROJA Dimenzije in teža Postavitvene mere (D x Š x V): pribl. 500 x 500 x 500 mm Teža pribl.: 20 kg OPREMA Prenosni računalnik in programska oprema (popolnost ni zagotovljena) Transportni zaboj Opomba: Rdeče podnožje, na katerem je prenosnik, ni vključeno v ponudbo.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 70352, skupna širina: 1.200 mm, skupna dolžina: 1.200 mm, skupna višina: 1.800 mm, skupna masa: 100 kg, Brez najmanjše cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Merilni volumen: 3.000 mm Natančnost: 0,045 mm PODROBNOSTI STROJA Dimenzije in teža Postavitvene mere (D x Š x V): 1.200 mm x 1.200 mm x 1.800 mm Teža: 100 kg OPREMA Prenosnik in programska oprema (popolnost ni zagotovljena) Podnožje Transportni zaboj Pgjdpfxszb A Avs Amfjr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 13.072 h, Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.500 mm, Brez minimalne cene – zagotovljen prodaja po najvišji ponudbi! Stroj je v odličnem optičnem in tehničnem stanju. Ni opaznih poškodb, korozije ali večjih znakov obrabe. Vzdrževanje je izvajano interno prek sistema SAP PM (električno vzdrževanje vsakih 6 mesecev, mehansko vzdrževanje vsakih 3 mesece). TEHNIČNE PODROBNOSTI Material: Neprekinjena valovita kartonska plošča Največja delovna širina: 2.500 mm Minimalna dolžina: 200 mm Debelina kartona: 2,57 mm Širina orodja: približno 45 mm Natančnost vzdolžnega reza: 0,2 mm Dolžinska toleranca: 1,5 mm/m Velikost embalaže: 600 × 600 × 300 mm Zmogljivost: približno 55 s/enota embalaže Pjdpfx Amjzu Akrsfegr Programska oprema in nadzorni sistem (z 21-palčnim večtočnim zaslonom na dotik in integrirano nadzorno omarico) Računalnik: Beckhoff C6930 (Intel Core i5, 16 GB RAM-a, SSD) z operacijskim sistemom Windows 10 IoT Enterprise Programska oprema: Beckhoff TwinCAT 3 Baza podatkov za oblikovanje embalaže: približno 250 modelov Nadzor proizvodnih seznamov Dinamično upravljanje orodij Večstopenjska optimizacija izkoristka materiala Dvostranska obdelava Nadzor dolžine ostankov Zbiranje proizvodnih podatkov v formatu CSV Jasna sporočila o napakah PODROBNOSTI O STROJU Delovne ure: 13.072 ur (v enosmenskem delovanju) Konstrukcija stroja: Varjena konstrukcija Večfunkcijska orodja za vzdolžno obdelavo: 6 Orodja za prečno obdelavo: 1 Gumirana valja: 2 Nadtis: segmentno nadzorovan Teža (po tovarniški tablici): približno 2.110 kg OPREMA Avtomatski menjalnik kartonov Avtomatska izbira optimalne širine kartonske plošče Dva delovna mesta za kartonske plošče Programska oprema Box-Designer za uporabniške delovne postaje Reže, perforacije in rezi po principu enega točkovnega sistema Tehnologija rezanja, ki ščiti material in preprečuje luščenje kartona Perforacija s oscilirajočim nožem z nastavljivo stopnjo perforacije Rezi z nazobčenim nožem na gumiranem valju Čisti robovi brez vlaken Servomotorji za nastavitev orodij Konstrukcija embalaže Konstrukcija dna/pokrova Dno z zatiči v vogalih za trdno pritrditev platišč Pokrov po standardu FEFCO 0331 Primerno za proizvodnjo natančnih embalaž za aluminijasta in kovana platišča

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HB10011N2025006, Stroj je še nerabljen! TEHNIČNE PODROBNOSTI STROJA Nadzor: Učenje s programiranjem Pgsdpjzuw D Tefx Amfer Moč motorja: 4,0 kW Dimenzije in teža Dimenzije (D x Š x V): 1.300 x 800 x 1.400 mm Lastna teža: 800 kg Transportni paketi: 1 kos OPREMA Dokumentacija Označba CE Certifikat CE

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, številka stroja/vozila: 19142, premer spodnjega valja: 140 mm, premer zgornjega valja: 120 mm, delovna širina: 1.250 mm, najv. debelina pločevine: 6 mm, TEHNIČNE PODROBNOSTI Pgedpfozuwwasx Amfjr Maksimalna debelina pločevine: 6 mm Maksimalna debelina predoblikovanja: 4 mm Maksimalna delovna širina: 1.250 mm Število valjev: 4 kos Število pogonjenih valjev: 2 kosa Premer zgornjega valja: 120 mm Premer spodnjih valjev: 140 mm PODROBNOSTI O STROJU Nadzor: CNC Pogonska enota: Hidravlična Moč: 4 kW Dimenzije in teža Lastna teža: 1.450 kg Dimenzije (D x Š x V): 2.700 x 1.450 x 1.500 mm Transportna teža: 1.450 kg Število transportnih paketov: 1 kos OPREMA Označevanje CE Dokumentacija

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 612332V00006, Leto izdelave: 2019, obratovalne ure: 8.893 h, nosilnost: 1.000 kg, dvižna višina: 4.780 mm, prosto dvigovanje: 1.850 mm, vrsta goriva: električni, tip droga: dupleks, dolžina vilic: 1.190 mm, TEHNIČNE PODROBNOSTI Višina dviga: 4.780 mm Nosilnost: 1.000 kg Prosti dvig: 1.850 mm Višina prehoda: 2.930 mm Dolžina vilic: 1.190 mm Minimalna širina vilic: 300 mm Maksimalna širina vilic: 680 mm PODROBNOSTI O STROJU Tip droge: Duplex Način pogona: Električni Tip baterije: 4 PzS 620 Leto izdelave baterije: 2019 Kapaciteta baterije: 620 Ah Napetost baterije: 48 V Delovne ure: 8.893 ur Dimenzije in teža Dimenzije (D x Š x V): 3.100 x 1.680 x 2.920 mm Lastna teža: 6.225 kg Pgsdpfx Aezulkusmfer OPREMA Prosti dvig Pnevmatike, ki ne puščajo sledi Polna kabina Merilec višine Uporabniški priročnik je na voljo CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, skupna masa: 7.000 kg, višina središča: 160 mm, razdalja med središči: 2.000 mm, model krmilnika: Siematic Rack PC 840, natančnost pozicioniranja: 0,001 mm, Avtomatski stroj za brušenje rezalnih orodij / stroj za brušenje rezalnih plošč! Za brušenje rezkalne komore in rezkalne površine na okroglih rezalnih orodjih. TEHNIČNE PODROBNOSTI Pgodszt Si Uepfx Amfjr Dolžina zobatega oboda: 1.700 mm Razdalja med centri: 2.000 mm Višina med centri: 160 mm Ločljivost osi X: 0,001 mm Ločljivost osi Y: 0,001 mm Ločljivost osi Z: 0,001 mm Ločljivost osi W: 0,001 mm PODROBNOSTI O STROJU Upravljanje osi: 4 osi Krmilnik: Siematic Rack PC 840 Procesor: Pentium 3 Pomnilnik programa: 20 GB Operacijski sistem: Windows 2000 Teža: 7.000 kg OPREMA Sočasna obdelava prek 2 ročnih koles.

Stanje: nepreverjeno (rabljeno), številka stroja/vozila: 23095, vrsta vhodnega toka: trifazni, skupna masa: 4.500 kg, vhodna frekvenca: 50 Hz, vhodna napetost: 380 V, vhodni tok: 17 A, Brez minimalne cene – zagotovljen prodaj po najvišji ponudbi! TEHNIČNE PODROBNOSTI Vrsta toka: 3~ Frekvenca: 50 Hz Delovna napetost: 380 V Upravljalna napetost: 220 V Nazivni tok: 17 A Varovanje Nazivni tok glavne varovalke (hitra): 35 A Nazivni tok glavne varovalke (počasna): 25 A Dimenzije in teža Dimenzije (D x Š x V): 3.800 x 2.100 x 2.000 mm Teža stroja: približno 4.500 kg Pgsdpszt Sfpjfx Amfer

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 60 mm, dolžina obdelovanca (maks.): 150 mm, največja debelina roba: 3 mm, vrsta nastavitve višine: mehanski, hitrost pomika os X: 18 m/min, vrsta aktuacije: električni, skupna višina: 1.468 mm, skupna dolžina: 4.412 mm, skupna širina: 1.511 mm, Zelo dobro ohranjeno in redno vzdrževano. TEHNIČNE PODROBNOSTI Višina obdelovanca: maks. 60 mm Širina obdelovanca: maks. 60 mm Pjdpfxjzv Rcrs Amfsgr Dolžina obdelovanca: maks. 150 mm Debelina robov: maks. 3 mm Materiali, ki se obdelujejo: ABS, PVC, furnir, masivni robni profili Napredovanje in upravljanje Hitrost napredovanja osi X: 18 m/min Nastavitev višine: mehanska Način upravljanja: električni PODROBNOSTI O STROJU Podatki, stanje: 20. 03. 2026 Glavno stikalo – skupni čas delovanja: 9.720 ur 57 min 06 s Verižni pogon – skupni čas delovanja: 1.216 ur 19 min 51 s Skupno število obdelovancev: 91.356 kosov Skupna dolžina obdelovancev: 63.904,7 m Skupna višina: 1.468 mm Skupna dolžina: 4.412 mm Skupna širina: 1.511 mm OPREMA - Nadzorna plošča Smartouch z zaslonom na dotik - Nastavitve programov s funkcijo shranjevanja - Sredstvo proti prijemanju - Predrezalna enota - Radijsko rezilo na zgornji in spodnji strani - Enota za zaobljanje kotov - Enota za odrezovanje robov (radij) - Enota za odrezovanje ravnih robov - Odstranjevalec lepila - Enota za poliranje - Samodejna podaja

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm Pgjdpfxjd Supgo Amfer - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Leto izdelave: 2025, težka konstrukcija z litoželezno mizo nežni premiki z ročico in ročnim kolesom ekcentrična vpenjalna naprava nastavek za vrtanje moznika z rasterji 16-22-25-32 mm 2 hitrosti 1500/3000 obr/min WESCOTT vrtalna glava 1 - 16 mm CE Dimenzije delovne mize: 287 x 550 mm Vzdolžni hod: 200 mm Vertikalni hod: 160 mm Prečni hod: 125 mm Pgedoycg U Espfx Amfor Moč trifaznega motorja: 1,8 kW, 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Chain Mortising Machine PANHANS Drilling table size: 520 x 290 mm Max. drilling depth: approx. 130 mm Max. drilling length: approx. 240 mm Height adjustment: approx. 135 mm Drill speed: 3000 rpm Motor power: 1.5 kW, 400 V, 50 Hz Required space (L x W): approx. 900 x 1100 mm Weight: approx. 220 kg 2-lever operation WESCOTT drill chuck, 20 mm Dowel drilling device with 4 stops (16, 22, 25, 32 mm) Mitre fence, continuously adjustable up to 45° 2 workpiece clamps Height adjustment via handwheel Pedoza Dx Njpfx Amfogr Motor protection switch with undervoltage release Workpiece stop, 1500 mm Includes inspection certificate for compliance with section 4 of the AM-VO Space requirement: approx. 950 mm x 1000 mm x 1300 mm Weight: approx. 200 kg Note regarding used machines: • Errors in technical data and prior sale excepted. • Prices listed are ex-location, free loading. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine at its location. • Special agreements are only valid if made in writing. (We only answer inquiries containing your address and telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Pedpsdd Hi Eofx Amfjgr Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Pgodpfxev Tb Hgs Amfor Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Pgsdor A Eq Repfx Amfsr The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue application system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture manufacturing, panel processing, custom productions, kitchens, bathroom furniture, joineries, and much more – CE compliant. Technical specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine features: Automatic feed for roll and strip materials Cartridge glue system allows switching between EVA and PUR adhesives during operation or changing adhesive colour 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer milling, with 2 motors each 0.6 kW Surface scraper unit Radius scraper unit Buffing unit Acoustic enclosure Control: Rotating and tilting operator panel All units can be individually controlled Function display with text and graphics Pgjdjy Emw Hspfx Amfer Preselection display for units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1,000 kg INCLUDES OTT Rondomat corner rounding device Note on used machines: • Subject to technical changes or prior sale. • Stated prices are ex-works – loading included! • Machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyer is welcome to inspect the machine at the site. • Special agreements are only valid in written form. (We will respond to enquiries only if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Debelina robov: 0,2 – 12 mm Dimenzije obdelovanca: Širina min. 70 mm Višina min./maks. 8 / 42 mm Dolžina min. 160 mm (robovi v trakovih) Dolžina min. 60 mm (z role) Hitrost podajanja: 12 m/min Valj za nanašanje lepila Višina delovne površine: 880 mm Stisnjen zrak: 6 bar, 1/4 palca Priključek za odsesavanje: premer 160 mm Dimenzije stroja (D x Š x V): 5600 x 950 x 1300 mm Teža: pribl. 2200 kg Priključna moč: pribl. 11,5 kW, 400 V, 50 Hz Oprema: - Dvojni pritisk z električno nastavitvijo višine - Avtomatski hranilnik za robove z role, do premera 800 mm - Pnevmatične škarje za robove v trakovih, do debeline 3 mm - Avtomatska vodilna letev Predrezalna enota z 2 visokofrekvenčnimi motorji, 1,5 kW, 12.000 vrt/min Dvojna krožna žaga - 2 visokofrekvenčna motorja, 0,2 kW, 12.000 vrt/min 2 avtomatska položaja = 0 + 3 stopinje Enota za obdelavo robov z 2 visokofrekvenčnimi motorji, 0,7 kW, 12.000 vrt/min Enota za obdelavo ukrivljenih robov - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min Enota za zaokroževanje robov AR2 - z 2 visokofrekvenčnimi motorji, 0,3 kW, 12.000 vrt/min, dvostopenjska, dotikalna Strgalna plošča Opomba o rabljenih strojih: • Pridržujemo si pravico do sprememb tehničnih podatkov in prodaje. Pjdpfehy Tlrjx Amfsgr • Navedene cene so cene ob prevzemu na našem lokalu – brezplačno natovarjanje! • Stroj je očiščen in preizkušen. • Vsi stroji se prodajajo v stanju, v katerem so, brez kakršnih koli jamstev. • Kupec ima možnost, da stroj pregleda na našem lokalu. • Posebni dogovori so možni le v pisni obliki. (Na povpraševanja bomo odgovorili le, če boste navedli svoj naslov in telefonsko številko!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Pgjdpslc Ewisfx Amfsr Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Pgedpfjwiwnqjx Amfjr Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Stroj za nanašanje lepila HÖFER LAN 1300 Za učinkovito nanašanje vodotopnih disperzij (belo lepilo ipd.), enostransko ali dvostransko nanašanje Največja širina nanašanja: 1300 mm Psdpfx Amsza A Aaofsgr Pogon: motor z zobniškim prenosom 0,37 kW Gumirani nanašalni valji Ø 170 mm Žlebljenje za količino nanosa: cca 120 g/m2 (furnirji) Konstantna hitrost nanašanja: cca 16 m/min. Delovna višina cca 900 mm Največja debelina obdelovanca: 80 mm Izvedba po CE Ročni podajalnik Upravljalna stran: desna Vključuje kolesca za lažje premikanje Dimenzije stroja D x Š x V = 1750 x 660 x 1300 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Pgedpfxsx Ah A Ae Amfjr Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: Pjdpfjt Dx U Sox Amfogr For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Pedog Nn E Nepfx Amfjgr Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. Pgedpsuxqzusfx Amfjr • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Pjdpfxett Da Ds Amfegr Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)