Weiler Commodor B - Teilüberholt nakup rabljenega (39.553)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout Heidenhain – In Excellent Condition!!! Technical Data: >> Year of manufacture: 1991, Machine No. 3140 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027 Size 6 with bayonet lock >> Tailstock MT 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.35 to 12 mm >> Weight: approx. 1,500 kg >> Spindle brake can be engaged >> Motor power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis digital readout by Heidenhain >> 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders >> Drill chuck, live centre >> Bed stop Laedpfx Ajylh Ncsl Ijb >> Machine feet About the Machine: For sale is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned facility where it saw very little use. The Commodor is one of the largest manual lathes produced by Weiler – robust and high-performance. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us; a complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our facility.

Stanje: dober (rabljeno), WEILER COMMODOR L&Z stružnica iz vojaške zaloge Bundeswehra - Dobro ohranjen, pripravljen za uporabo - Premer struženja 180 mm - Dolžina struženja 1000 mm - Prehod palice 56 mm - Območje vrtljajev 25 - 2000 obr/min - Navoji / metrični / colski itd. - Avtomatski vzdolžni in prečni pomiki - Konjiček MK 4 - Trivpenjalno vpenjalo 250 mm - Električna zaščita vpenjala Ledpfjykknfsx Al Ioab - Osnovni nosilec Multifix in vložki - Naprava za hlajenje - Zadnja zaščita za ostružke - Dokumentacija stroja Dimenzije: D x Š x V 2,5 x 1,3 x 1,7 m / Teža: 1500 kg Napake in spremembe pridržane

Stanje: dober (rabljeno), Leto izdelave: 1988, 1 rabljeni stružnica z vodilnim in vpenjalnim vretenom Proizvajalec: Weiler Tip: 160 B Leto izdelave: 1988 Tehnični podatki Razdalja med konicama: 650 mm Premer obdelave nad posteljo: 320 mm Premer obdelave nad prečnim suportom: 192 mm Višina konic: 160 mm Premer vretena: 40 mm Nazivna moč: 2,4 / 3 kW Hitrosti vrtenja: 48 – 2500 obr/min Dimenzije: pribl. D 2,20 x Š 1,10 x V 1,40 m Teža: pribl. 1 t Lodpfow Sdr Hjx Al Ioab Oprema Digitalni prikazovalnik Heidenhain Glava Multifix z različnimi vložki 3-čeljustna glava Nujna zaustavitev

Stanje: potreben popravila (rabljeno), Leto izdelave: 1990,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop Lsdpfx Alexcuazs Ijab >> Electronic spindle guard >> Rear cover >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: Lodpfew Nw Dqex Al Isab >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: potreben popravila (rabljeno), Turning length 1000 mm Swing diameter over bed 380 mm Swing diameter over cross slide 190 mm Spindle speed range 25 - 2000 rpm Lsdow U U Uqjpfx Al Ieab Number of spindle speeds 18 Spindle bore Ø 56.0 mm Tailstock quill taper MK DIN 228 / MK 4 Quill stroke 150 mm Bed width 310 mm Spindle mount DIN 55027 / 6 Longitudinal feeds 0.022 - 0.8 mm/rev Cross feeds 0.011 - 0.4 mm/rev Thread cutting metric 0.3 - 10.0 mm Operating voltage 380 V Total power requirement 7.5 kW Machine weight approx. 1600 kg Basic functions available Machine has various leaks Sold as is at a special price! Lathe with precision-ground and induction-hardened bed. Very well suited, e.g., for use in workshops and training centers. - Machine video - ?v=zCGu4i6V5dM Equipment: - robust lead-screw and feed-screw lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX tool post - size B - with 3 inserts - movable tailstock, including quick-action drill chuck - swarf guard rear panel - front emergency stop button - adjustable bed stop - coolant device including coolant tray - operating manual (PDF)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor v dobrem delujočem stanju. Specifikacije: Premer struženja nad posteljo: 380 mm Lsdox Ngpdspfx Al Ioab Premer struženja nad prečnim suportom: 190 mm Razdalja med konicama: 1000 mm Premer skozi glavna vretena: 56 mm Hitrost vrtenja: 25-2000 vrt/min Moč motorja: 4 kW Stroj je opremljen z: 3-osnim digitalnim merilcem 3-čeljustno glavo z več kompleti čeljusti Hladilni sistem Multifix nosilec orodja s 4 nastavki Vpenjalna naprava s vpenjalnimi pušami Ležiščni omejevalnik

Stanje: rabljeno, Leto izdelave: 2001, Condition: Used Year of manufacture: 2001 Stock number: 010191 Delivery time: prompt, subject to prior sale Country of origin: Germany Price: €24,500 Available in stock: 1 Swing diameter over bed: 320 mm Center distance: 650 mm Center height: 160 mm Spindle bore: 40 mm Swing diameter over cross slide: 192 mm Bed width: 205 mm Spindle mount / DIN55027: Size 5 Spindle taper: 5 MK (Morse taper) Number of spindle speeds: 16 Spindle speed range: 48 – 2500 rpm Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Metric thread range: 0.25 – 8 mm Inch thread range: 80 – 2 TPI Module thread range: 0.2 – 4 DP thread range: 200 – 5 Cross slide travel: 150 mm Compound slide travel: 100 mm Tailstock quill diameter: 40 mm Tailstock taper: 3 MK (Morse taper) Tailstock quill stroke: 85 mm Motor: 2.4 / 3 kW Length: 1582 mm Width: 715 mm Height: 1245 mm Weight: 720 kg 3-axis digital readout Heidenhain NEW Röhm 3-jaw chuck, Ø 160 mm, with internal and external jaws Quick-change tool post with 1 rectangular and 1 round insert Ledpfxoyxxyge Al Ijab Quick-action collet chuck with collets Ø 3 – 30.5 mm Live center Drill chuck Chuck guard Lead screw and feed screw guard cover Motor brake Coolant system Machine feet Operating manual in German with CE declaration of conformity Hydraulic drive Standard control system Extension rail on bending beam 2-stage foot switch Resettable sheet metal support Water groove Safety device according to BG testing standards Operating manual in German with CE declaration of conformity Quality made in Germany BUYING USED MACHINES IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum safety and complete transparency. • HONEST INSIGHTS Detailed photos & functional videos of the actual condition • LIVE ON-SITE CHECK Live demonstration at our premises • DIGITAL PRESENTATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day return policy Details:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 750 mm, premer struženja: 330 mm, izvrtina vretena: 41 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, moč vretenovega motorja: 11.000 W, premer tulec: 50 mm, poteza s peresom: 110 mm, premer struženja nad ležiščem sani: 435 mm, skupna masa: 1.400 kg, višina središča: 165 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: Cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Lasdpfsvphv Tex Al Ieb Condition: good, fully operational Location: Austria (Graz) Inspection: On-site or via video call by arrangement Images/Video: Additional photos and videos of the running machine available upon request. Technical specifications: Working area: Center height: 165 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Distance between centers: 750 mm Spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. spindle torque: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed drives Feed range (stepless): longitudinal: 0.001–50 mm/rev (additionally specified: 0–20 mm/rev) cross: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (additionally specified: 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / Quill: Quill diameter: 50 mm Quill travel: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for more information or to arrange a viewing appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by Elesta from Training Workshop!! Technical Data: >> Machine No. 88-8115, Year of manufacture: 1988 >> Centre height: 140 mm Ledpfsy Tmkvex Al Isab >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by Elesta >> Quick-clamping device for internal and external collets (see photo) >> 1 pc. 3-jaw chuck, 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler runs smoothly even at high speeds. The original location was a training workshop. The lathe is equipped with extensive accessories. You are welcome to inspect and test the machine under power on site to convince yourself of its excellent condition.

Stanje: rabljeno, Leto izdelave: 1993, Interna številka artikla: 26036 Stružnica Weiler Praktikant 160B Leto izdelave: 1993 Višina konice: 160 mm Razdalja med konicama: 650 mm Hitrost vretena: 48–2.500 obr/min Vpenjalna odprtina vretena: 40 mm Stroj je opremljen z naslednjim: - 3-osni digitalni prikazovalnik (Prikaz Z0 ne deluje, verjetno je poškodovana merilna letev) - Multifix "A" osnovni nosilec - Vpenjalna glava MK3 - Tridelna vpenjalna glava Garant 160 (vklj. z izmenljivimi čeljustmi) - Luneta - Različna izmenljiva zobniška kolesa - Navodila za uporabo / dokumentacija o servisih ipd. Stanje: Vse prestave menjalnika se lahko gladko prestavljajo. Lodpfxsy D N Dae Al Isab Glavno vreteno teče zelo mirno tudi pri visokih obratih. Ležišče ima manjše brazgotine. Mere (D x Š x V): 180 x 90 x 170 cm Teža: ca. Stroj je popolnoma funkcionalen in ga je mogoče po dogovoru ogledati pod elektriko na več kot 500 m² ogrevane skladiščne površine.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 140 B Lead and Feed Spindle Lathe, toolroom precision, with NEW K&C 3-axis digital readout! Technical Data: >> Year of manufacture: 1989 Machine no.: 89-140-1471 >> Centre height: 140 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Switchable spindle brake >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Equipment: >> NEW 3-axis digital readout by K&C, 12-month manufacturer's warranty with operator’s manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch >> Collet chuck NEW, collet range 3 to 25 mm in 1 mm steps NEW >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size A with 2 steel holders >> Face plate Laodpjymdymefx Al Isb >> Bed stop >> Rear wall >> Machine feet >> Electronic spindle guard >> Operating manual For safety: Electronic spindle guard, lead and feed spindle covers, 2 emergency stops, spindle brake, electronic gear cover safety interlock About the machine: For sale is a Weiler Praktikant 140 B lead and feed spindle lathe in very good condition. This fine lathe comes from a training workshop. The slides all move smoothly and evenly. The Weiler runs quietly even at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for surface finishes comparable to grinding. Take advantage of the opportunity to inspect and test the machine under power on site and see its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching Laedpfx Alsvrdlcj Ieb >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Laedpewrm Dtofx Al Ijb Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: novo, Schinfa MachineREVISIE has been the specialist for overhauls for more than 27 years. All work is carried out in-house. We are able to grind up to 2700 mm. We restore machines precisely according to DIN standards. Lsdpfx Aofhnr Iol Isab We can overhaul your existing machine or supply you with one of our own machines.

Stanje: delavnici obnovljeno (rabljeno), Informations sur le produit "Voest Alpine DA 160" Tour à vis-mère et à vis de chariotage Voest Modèle DA 160 État : révisé Données techniques Hauteur de pointe : 165 mm Distance entre pointes : 650 mm Diamètre de rotation au-dessus du banc : 330 mm Diamètre de rotation au-dessus du chariot transversal : 190 mm Largeur du banc : 210 mm Diamètre de la vis-mère : 25 mm Diamètre du mandrin : 160 mm Cône de la contre-pointe : CM 3 Vitesse de broche (16) : 30 - 2500 tr/min Puissance moteur : 2 / 2,4 kW Course de la contre-pointe : 100 mm Dimensions (LxlxH) : 1500 mm x 900 mm x 1650 mm Équipement : - Affichage numérique 3 axes, marque Sino - NEUF - Mandrin 3 mors - Bouton d'arrêt d'urgence - Porte-outil à changement rapide système Multifix, nombre d’outils : 6 - Éclairage machine NEUF - Butée de banc - Système de refroidissement NEUF Ljdpfjy Ndqrex Al Ijab - Mandrin de perçage avec cône morse - Pointe tournante - Carters de vis-mère et de vis de chariotage NEUFS - Protecteur de mandrin avec contact de sécurité - Outils de service - Notice d’utilisation - Pieds de machine

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Dear Sir or Madam, We hereby offer a Deckel FP3 milling machine. The machine is extensively partially overhauled in our workshop and is therefore in excellent condition. Upon request, we are happy to equip the machine with safety or additional devices according to your requirements. We look forward to your inquiry! Delivery time: on request Dimensions: 2.00 x 1.60 x 1.90 m (LxWxH) Weight: approx. 1500 kg Travel X-axis: 500 mm Laodpfx Aloq H Eabo Ieb Travel Y-axis: 300 mm Travel Z-axis: 380 mm Clamping table area: 800 x 420 mm Spindle speed range: 40–2000 rpm Spindle taper: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed speed: 10–500 mm/min Rapid traverse: approx. 1500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - You can freely choose the paint color of the selected machine - Additional accessories such as tools can be ordered together upon request - Upon request, we can supply and install further equipment such as safety devices - We are happy to organize shipping and/or on-site installation

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 380 mm, dolžina podajanja os Z: 350 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 380 mm, pomik po osi Z: 350 mm, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 2 m/min, poteza s peresom: 50 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 63 obr/min, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 2 m/min, hitri pomik na osi Z: 4 m/min, dolžina mize: 360 mm, širina mize: 800 mm, skupna masa: 1.600 kg, obremenitev mize: 200 kg, leto zadnje generalne obnove: 2026, teža obdelovanca (maks.): 200 kg, moč: 5 kW (6,80 KM), Dear Sir or Madam, For sale is a universal milling machine of the type Maho MH500M, which stands out in particular due to its extremely simple and user-friendly operation. For example, all feed rates can be infinitely adjusted using potentiometers. The machine has undergone extensive partial overhaul in our workshop and is therefore in excellent technical and visual condition. All guideways are in good shape, the gearboxes run quietly, and the operating levers shift smoothly. Availability: on request X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 350 mm Main spindle speed range: 63 – 4,000 rpm Transmission stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table type: fixed Table clamping surface: 800 x 360 mm T-slots: 14H7 – 5 / 63 Maximum table load: 200 kg Feed rate: 1 – 2,000 mm/min Rapid traverse (X / Y / Z): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Space requirements: approx. 3.0 x 3.0 x 2.5 m Further equipment and accessories: coolant system, work lamp, electrical documentation, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint your chosen machine in your desired color - On request, you can order further accessories such as tools, etc. directly - On request, we can install additional accessories, such as safety devices, etc. - We would be happy to take care of shipping and/or installation Ledpfx Alernnf No Ioab

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv milling machine. This newer version impresses particularly with its infinitely variable spindle speed control featuring a Heidenhain Aktiv controller, which makes operation both extremely straightforward and highly convenient. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site. Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Travel paths: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital display with Aktiv controller, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can provide a complete or partial overhaul of the selected machine - Upon request, you can order additional accessories such as tools, etc. - Upon request, we can install further equipment, such as safety devices, directly for you - We are happy to arrange shipping and/or installation services Lsdpfsx Hr Dzex Al Ijab

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a partially overhauled Deckel FP2. This later model stands out especially due to its stepless speed control, making operation very easy and extremely comfortable at the same time. The machine underwent extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site to see for yourself. --- 3 units currently available immediately! --- Availability: 3x Immediately Machine No.: 2202-xxxx Table: Fixed angle table or swiveling rotary-tilt table Travel: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2,500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling pads, safety devices (optional) Lsdpey Exayefx Al Ieab Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install further equipment such as safety devices, etc. for you - We are happy to organize shipping and/or on-site delivery for you

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance Lasdpfx Aspy Eldel Iob - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, poteza s peresom: 90 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, Oprema: dokumentacija / priročnik, Dear Sir or Madam, We are pleased to offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly and partially refurbished in our workshop, bringing it to an absolutely top condition, making it technically, visually, and geometrically almost indistinguishable from a new machine. We look forward to receiving your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Axis travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table design: rigid angular table or rotary/swivel/tilt table Additional features and accessories include: Heidenhain 3-axis digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request… Our service promise to you: Lodpfx Asx Irwdjl Ioab - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - You can freely choose the color of your selected machine - If desired, you can order additional accessories, such as tools, directly - On request, we can install additional accessories, such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.000 obr/min, poteza s peresom: 60 mm, širina mize: 650 mm, dolžina mize: 350 mm, skupna masa: 1.800 kg, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a Kunzmann WF4/3 CNC milling machine, year of construction 2004. The machine can be operated both manually and under CNC control. The Heidenhain TNC124 controller is ideal for learning basic CNC programming and remains a popular choice for production applications as well as for machining special components. The quickly retractable vertical milling head turns the Kunzmann into a true all-rounder with a compact footprint. This machine is available from us workshop-tested, partially refurbished, or fully overhauled—each variant available with or without an enclosure. Availability: on request Year of manufacture: 2004 Control: Heidenhain TNC124 Table: fixed angular table 650x350mm Lsdpfsu H U Hksx Al Isab Travels: X400mm / Y350mm / Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1–4000 rpm Feed rate: 0–2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, instruction manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master craftsman business specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced prior to delivery - Upon request, we can completely or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install further accessories such as safety devices - We are happy to arrange shipping and/or on-site installation for you

Stanje: rabljeno, Centrifugal Pump, Water Pump -Pump Housing: Stainless steel (Nirosta) -Impeller: Stainless steel -Max. flow rate: 80 m³/h -Max. head: 4 m water column -Motor power: 2.5 kW -Speed: 1,415 rpm -Pipe connection inlet: DN125 Ledpfedwc I Dox Al Isab -Pipe connection outlet: DN80 -Dimensions: -Weight: 125 kg