Tkt Kontejner Po Prenovi E-1170 nakup rabljenega (75.721)

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Nljdpfx Aegcw Rmjgxoa Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Njdpfx Aeyh S Aisgxola Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, širina skobljanja: 230 mm, skupna višina: 120 mm, Štiristranski skobeljni stroj / Avtomat za profiliranje Proizvajalec: Weinig Model: Profimat 23 E Leto izdelave: 1999 Za štiristransko skobljanje in profiliranje Maks. širina skobljanja: 230 mm Maks. višina skobljanja: 120 mm 5 vreten Nlodsygcl Ijpfx Agxja Premer vretena: 40 mm Razporeditev vreten: Spodaj, ca. 4 kW Desno + levo, ca. 5 kW Zgoraj, ca. 4 kW Spodaj, ca. 4 kW Priklop: 380 V, 50 Hz

Leto izdelave: 2020, obratovalne ure: 0 h, stanje: kot nova (razstavni stroj), High-Pressure Cleaner PTC Easypower E – Similar but not Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, ... - Working pressure: 300–700 bar - Flow rate: 15–30 l/min - Motor: Electric 32A/63A, 3Ph-400V-50Hz, 20–30 HP / 15–22.5 kW, 1450 rpm / 1750 rpm Nlsdpfxjfdz E Hj Agxja - Dimensions: 1,000 x 750 x 850 mm - Net weight: approx. 180/210 kg - High-pressure pump: Comet three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Stainless steel covers - Mounting bracket for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-delta starter - Safety switch with thermomagnetic relay for motor protection - Hour meter - 4 industrial wheels, 320 mm - Direct water intake via self-priming pump - Stainless steel unloader valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Includes: 20 m high-pressure hose with stainless steel quick couplers, spray gun, 1200 mm stainless steel lance and 15° flat jet nozzle The following models are available: Easy Power E 30/300 | 30 l/min, 300 bar | 18.5 kW Easy Power E 15/500 | 15 l/min, 500 bar | 15 kW Easy Power E 21/500 | 21 l/min, 500 bar | 22 kW Easy Power E 15/700 | 15 l/min, 700 bar | 22 kW

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), High-Pressure Cleaner PTC Easypower XL E – similar but not Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Flow rate: 13-38 l/min - Motor: IE3 electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 rpm or IE3 electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 rpm Nlsdpfsfdzxijx Agxsa - Dimensions: 1,450 x 900 x 1,050 mm - Unladen weight: approx. 450 and 550 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Stainless steel covers - Bracket for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-delta starter and 10 m power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Hour meter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and 15° flat jet nozzle The following models are available: Easy Power XL E 38/400 | 38l/min 400bar | 30kW | 560kg Easy Power XL E 30/500 | 30l/min 500bar | 30kW | 560kg Easy Power XL E 20/800 | 20l/min 800bar | 30kW | 580kg Easy Power XL E 15/1000 | 15l/min 1000bar | 30kW | 580kg Easy Power XXL E 19/1000 | 19l/min 1000bar | 37kW | 580kg Easy Power XXL E 15/1250 | 15l/min 1250bar | 37kW | 580kg Easy Power XXL E 13/1500 | 13l/min 1500bar | 37kW | 580kg

Leto izdelave: 2022, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), High-pressure cleaner PTC Easypower L E, similar but not Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Flow rate: 38 or 30 l/min - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or Electric 63A, 3Ph-440V-60Hz 40HP/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Unladen weight: approx. 280 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Stainless steel covers - Holder for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage (24V) supply and control unit with star-delta starter and 10 m power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels Nledpfjfdzz Uex Agxoa - Direct water intake via self-priming pump - Stainless steel unloader valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Includes 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance, and 15° flat jet nozzle The following models are available: Easy Power L E 38/500 | 38l/min. 400bar Easy Power L E 30/500 | 30l/min. 500bar

Stanje: pripravljen za uporabo (rabljen), Allen-Bradley 22-COMM-E SN: 4024A5A5 module with Rockwell Automation 194706-Q06 / AMP0621 cable for PowerFlex 40 – with cover, used, in good condition, 100% functional, scope of delivery as per photos. Nlodpfjpf An Rex Agxoa

Stanje: pripravljen za uporabo (rabljen), Siemens 6FM1706-3AA20 Positioning/Counting Module WF706 E-Version A / 3 SN11458, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos Nlsdpfx Aoi I I D Nogxoa

Stanje: novo, Siemens 6SC6500-0BC01 Simodrive 650 FBG spindle positioning unit, version D, unused, in sealed original packaging, 100% functional Nsdpfx Aoxag Ewogxola

Stanje: pripravljen za uporabo (rabljen), Siemens 6ES5247-4UA41 Simatic positioning module for stepper motors, version E, revision 5, serial no. H0203080, used, normal signs of wear, 100% functional. Njdoi Edn Njpfx Agxola

Stanje: pripravljen za uporabo (rabljen), Siemens 6FM1706-3AA20 pozicijski/številčni modul WF706 E-stand A / 3 SN11270, uporabljen, z običajnimi sledovi uporabe, 100 % delujoč, obseg dobave po slikah. Nodpfx Aji I I D Eogxola

Stanje: pripravljen za uporabo (rabljen), Siemens 6FX1124-0BA02 module, Dualport, version E, revision: D, serial number: 333, used condition with normal signs of wear, fully functional, scope of delivery as per photos. Nlsdpoxagn Sofx Agxea

Stanje: pripravljen za uporabo (rabljen), Siemens 6ES5247-4UA41 Simatic positioning module for stepper motors, version E, revision 7, serial number F9 414445, used, normal signs of wear, 100% functional. Njdpfx Asi Edn Tsgxjla

Stanje: rabljeno, prevoženi kilometri: 16.902 km, moč: 110 kW (149,56 KM), prva registracija: 05/2021, vrsta goriva: hibrid, barva: modra, vrsta prenosa: samodejen, število sedežev: 5, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, sistem za imobilizacijo, Special equipment: Storage and luggage compartment package, ambient lighting, trailer hitch preparation, Audi connect plus (internet-based services), exterior mirrors electrically adjustable, heated and folding, with automatic dimming and curb function, business package, roof rails (aluminum), driver assistance system: high beam assist, tailgate electrically operated (open + close), gloss package, interior mirror with auto-dimming, S line interior package, low rolling resistance tires, front lumbar supports electrically adjustable, metallic paint, progressive steering, rear seat backrest split/foldable (40:20:40), seat upholstery/trim: Alcantara/artificial leather combination with embossed logo, heated front seats, Bang & Olufsen sound system, sound generator, privacy glass (tinted rear windows) Nlsdpfxjv Tt A Te Agxja Further equipment: Passenger airbag deactivation, driver and front passenger airbags, acoustic pedestrian protection, external sound (e-sound), Audi connect (emergency call and assistance system), Audi Drive Select, driver's side aspherical exterior mirror, passenger side convex exterior mirror, body-colored exterior mirrors, roof edge spoiler, e-tron charging system, entry sills with aluminum inserts, electric motor 85 kW (hybrid drive), driver assistance system: evasive assist, driver assistance system: brake assist (Audi pre sense front), driver assistance system: lane departure warning, windshield with heat-insulating glass, velour floor mats, hybrid, hybrid 150 kW (1.4 liter - 110 kW TFSI engine), interior trim accents in black glass-look on the dashboard, ISOFIX child seat anchorages, 4-door body, child locks electrically operated, 2-zone comfort automatic climate control, head airbag system (Sideguard), three rear headrests, charging cable for public charging stations (e-tron), charging cable with industrial plug (16 A / 400 V), charging cable with household plug (Schuko), steering column (steering wheel) mechanically height and reach adjustable, alloy wheels, illuminated vanity mirrors, Multi Media Interface MMI Basic Plus / MMI Radio Plus, non-smoker package, gasoline particulate filter (GPF/OPF), electro-mechanical parking brake, digital radio reception (DAB), tire repair kit, tire pressure monitoring system, low emission according to Euro 6d emissions standard, front side airbags, seat occupancy sensor for seatbelts, standard suspension, stationary air conditioning, start/stop system, 12V socket in front center console, bumper: advanced design, universal Bluetooth interface

Stanje: pripravljen za uporabo (rabljen), Siemens 6FX1121-8BC02 večvratni modul SN: 34 E-Stand: B / 00, rabljen, dobro ohranjen, 100% funkcionalen, dobava v skladu s fotografijami. Njdpfx Asx Euuyogxsla

Stanje: pripravljen za uporabo (rabljen), Siemens 6EW1861-2AF Napajalnik / Napajanje SN: 79051269 E-izvedba, rabljeno, dobro ohranjeno, 100% delujoče, obseg dobave glede na slike. Nodpfsx Euq Iox Agxola

Stanje: pripravljen za uporabo (rabljen), Siemens 6FM1706-3AA20 pozicionirni/števčni modul WF706 E-Stand A / 3 SN:11272 , rabljen, z običajnimi sledmi uporabe, 100 % delujoč, dobava skladno s fotografijami Nljdpfxoi Ed H Ds Agxea

Stanje: pripravljen za uporabo (rabljen), Potopna črpalka, skupna dolžina: 1170 mm, potopna globina: 700 mm. Proizvajalec neznan, identifikacijska ploščica ni priložena. Rabljena, z običajnimi sledovi uporabe, 100 % delujoča. Obseg dobave kot na fotografijah. POZOR: Stroške embalaže in prevoza prosim povprašajte posebej! Nledox Dwgaspfx Agxja

Stanje: pripravljen za uporabo (rabljen), Siemens 6FX1136-8BB00 880 BGR Multiport E-Stand: D SN: 13, rabljen, v dobrem stanju, 100% delujoč, obseg dobave kot na fotografijah. Nedpfex Dxc Nox Agxsla

Stanje: pripravljen za uporabo (rabljen), Bosch VM 5 / E-G - napajalnik VM 5/E-G 1070916727, rabljen, strokovno popolnoma obnovljen in preizkušen z 12-mesečno garancijo, 100 % brezhibno delujoč, vsebina paketa po fotografijah. Nljdpfoi D Ug Hjx Agxja

Stanje: rabljeno, Leto izdelave: 2024, Side-wall height 1st extension (mm): 500; Sheet floor thickness (mm): 4; Axle square (mm): 70 / Track (mm): 1550; Number of hard chromed lift cylinders: 1; Stage diameter 1 (mm): 90 / Stage diameter 2 (mm): 75 / Stage diameter 3 (mm): 60; Cylinder stroke (mm): / 1400; Tipping angle: Nljdpfx Aer H D Txjgxoa

Stanje: novo, Leto izdelave: 2025, Stroj za profiliranje kapnih obrob za okna PO-1 omogoča izdelavo profila „okenske obrobe“ z valjanjem pločevine skozi oblikovalne valje. Okenska obroba je element, ki se pogosto uporablja v gradbeništvu pri vgradnji oken. Pri standardnem načinu se okenska obroba postopoma upogiba z uporabo ročnega upogibnega stroja. To je cenejši, vendar bolj dolgotrajen postopek. Pločevina mora biti predhodno označena za vsak upogib. Vsak upogib se nato izvede z ročnim upogibnim strojem. Operater mora nastaviti potrebne dimenzije glede na oznake, pritrditi pločevino z vpenjalnim mehanizmom stroja in jo potem upogniti. Dolžina okenske obrobe je omejena z največjo delovno dolžino upogibnega stroja. Zato je vsak ročni upogib zamuden in proizvodni proces postane drag ter neučinkovit. Z namenom izboljšave proizvodnega procesa ponujamo stroj za profiliranje kapnih obrob za okna PO-1. Ta stroj valja profil okenske obrobe na obeh straneh istočasno v eni sami operaciji. Hitrost valjanja je 10 m/min. Stroj je opremljen s 7 pari oblikovalnih valjev. Minimalna širina okenske obrobe je 120 mm pri hkratnem valjanju na obeh straneh, maksimalna širina pa 610 mm. Nledpfxjlwt Adj Agxoa Za spremembo širine okenske obrobe preprosto uporabite nastavitveni ročaj, ki omogoča enostavno prilagajanje stroja za prehod z ene širine na drugo. Tako postopek nastavitve ni zamuden. Na stroju je prav tako možno valjati okensko kapno obrobo v dveh korakih.

Stanje: novo, Leto izdelave: 2025, STARWELD PO je visokozmogljiva mrežna varilna linija za izdelavo srednje težkih in težkih žic ali ojačitvenih mrežastih plošč. To je linija, primerna za velike proizvodne potrebe. Oblikovanje je narejeno v skladu s specifičnimi parametri projekta in vrste mreže - npr. po želji lahko stroj ima tudi valjarni mehanizem za izdelavo zvitkov. PRATTO lahko dobavi vso potrebno pomožno opremo. Izdelki se lahko uporabljajo v gradbeni industriji. Uporabljajo se tudi za police, mreže, kletke, palete in posode, pa tudi za ograje (navadne in upognjene). Lastnosti: Dovod žice iz tuljave Prečna žica, ki se napaja iz tuljave Obrezovanje robov (neobvezno) Zlaganje plošč (neobvezno) Nagibanje plošče (neobvezno) Kotalni mehanizem (neobvezno) Upogibna enota (neobvezno) Odlična natančnost mrežnega očesa Popolnoma avtomatski CNC programabilen Visoka hitrost Visoka natančnost z napredno servo tehnologijo Enostavne prilagoditve stroja Enostavno vzdrževanje in uporaba Neded Rlalopfx Agxjla Visoka zanesljivost in dolga življenjska doba

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 95 m/min, višina plošče: 60 mm, dolžina plošče: 900 mm, širina plošče: 3.000 mm, proizvodna zmogljivost: 1.500 enota/h, TEHNIČNE PODROBNOSTI Minimalna širina plošče: 250 mm Maksimalna širina plošče: 3.000 mm Minimalna dolžina plošče: 100 mm Maksimalna dolžina plošče: 900 mm Minimalna debelina plošče: 12 mm Maksimalna debelina plošče: 60 mm Največja teža na ploščo: 50 kg Nlsdpfx Ajyzn Sdegxsa Delovna višina: 1.060 mm Hitrost transporterja plošč z inverterjem: 20 - 95 m/min Hitrost pri ploščah nad 50 kg: 50 m/min PODROBNOSTI STROJA Model krmiljenja: TPA - Albatros - CNC 2000 OPREMA EASYTOOL programska oprema 5 razdeljenih spodnjih vertikalnih vrtalnih glav, avtomatsko prilagodljive z NC krmiljenjem, vsaka s 26 neodvisnimi vreteni 2 horizontalni vrtalni glavi z razdeljenimi glavami, 28 + 28 vretenc (na vsaki strani), neodvisno razporejene na dveh nivojih Zunanja referenca: MMA004.003

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 50 kg, hitrost pomika os X: 95 m/min, višina plošče: 60 mm, dolžina plošče: 900 mm, širina plošče: 3.000 mm, DÉTAILS TECHNIQUES Largeur de panneau min. : 250 mm Largeur de panneau max. : 3 000 mm Longueur de panneau min. : 100 mm Longueur de panneau max. : 900 mm Épaisseur de panneau min. : 12 mm Épaisseur de panneau max. : 60 mm Poids maximal par panneau : 50 kg Hauteur de travail : 1 060 mm Vitesse du convoyeur à panneaux avec variateur : 20 - 95 m/min Vitesse pour panneaux de plus de 50 kg : 50 m/min DÉTAILS DE LA MACHINE Modèle de commande : TPA - Albatros - CNC 2000 ÉQUIPEMENT Logiciel EASYTOOL 5 têtes de perçage verticales inférieures divisées, automatiquement flexibles avec commande numérique, chacune avec 26 broches indépendantes 3 têtes de perçage verticales supérieures divisées, automatiquement flexibles avec commande numérique, chacune avec 26 broches indépendantes Nljdpfxsyzn D Tj Agxoa 2 têtes de perçage horizontales à têtes divisées, 28 + 28 broches (par côté), disposées indépendamment sur deux niveaux Référence externe : MMA004