Električni 400-500bar 30-38l / min.

PTC Easypower L E

Stanje: dober (rabljeno), Leto izdelave: 2011, Fuji Flow Wrapper Visokohitrostni horizontalni stroj za oblikovanje, polnjenje in zapiranje (form-fill-seal) Tip: FW3410/B Leto izdelave: 2011 Terminalni tiskalnik Zodiac HC Hnsdpfsv T D D Uex Adkji 200 V, 3 faze, 50/60 Hz, 30 A Širina traku: 250 mm, dolžina zatesnitve: 300 mm Dimenzije: 3360 mm x 1200 mm x 1900 mm.

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Hnedpfx Aegulr Hodkei Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: novo, Length: 1900 mm Width: 810 mm Height: 860 mm Internal dimensions (LxWxH): 1.5 x 0.74 x 0.78 m Machine weight: approx. 200 kg Space requirement: approx. 1.9 x 0.81 x 0.86 m For collecting and disposing of bulk materials and industrial waste Hedpfxegvqz Is Adkeni - Tipping container – forklift attachment for in-plant storage of bulk materials - Powder-coated in standard colours: RAL 5010 blue, RAL 6011 green, or RAL 7016 anthracite grey / special paint finish available on request - Tipping mechanism with base plates for swivel and fixed castors - Drain fixture - Sturdy base frame with fork entry pockets - Favourable load centre - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Stanje: dober (rabljeno), Three-phase motor, electric motor Hnedpfxod E Tfns Adkei - Power: 5.5/8/22 kW - Speed: 740/975/1475 rpm - Shaft diameter: Ø 55 mm - Design: B3 - Protection class: IP 33 - Dimensions: 750/510/H390 mm - Weight: 275 kg

Leto izdelave: 2025, stanje: novo, Standard configuration with column Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Hnodpfxegn Tzlj Adkji Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information

Stanje: dober (rabljeno), Kilkaset wózków retortowych z tacami. W bardzo dobrym stanie. Hedpfsr Iyu Tox Adkoni

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Delitev 100–600 g Širina: 610 mm Globina: 1350 mm Višina: 1540 mm Širina traku: 245 mm Hjdpfxjfcu Nve Adksni Dolžina traku: 750 mm Moč motorja: 1,5 kW Teža: 550 kg

Stanje: skoraj kot novo (rabljeno), Woma Kärcher topla voda s 500 bar in 27 litri, Kubota dizel 36,5 kW, 650 ur. Hnjdsxwyc Dspfx Adkji

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 350 letvica, pritisk: 350 letvica, gorivo: dizel, moč: 3 kW (4,08 KM), New High-Pressure Unit Are you also looking for a new high-pressure (HD) unit? We build them to your specifications. Here, we present our latest HD unit—this model is unique and a true all-rounder, offered in this configuration nowhere else on the market! Specifications VIHT2350/20/40/100 (demo) • Engine: 30 kW at 1500 rpm / 36 kW at 1750 rpm • 2 x Mazzoni pumps, each delivering 21 liters per minute at 1450 rpm, set to 350 bar. Thanks to the low rpm, the engine runs quietly and smoothly. • Pressure regulation via rpm adjustment and manual setting with 2x Zero 350 valves; hoses are virtually pressureless (10 bar) when the trigger is closed. This allows safe operation, as hoses and pumps are almost pressureless, and only build up pressure when the trigger is opened. • 2 x burners for producing hot water up to 120°C. On request, V+ Steam is available, providing 140°C at the nozzle. • The machine allows two operators to work independently and simultaneously, with different temperatures and pressures. • The drive system has been specially developed for long service life and easy maintenance. • Equipped with 2 diesel tanks—1x 90 liters for the engine and 1x 90 liters for the burners. • The unit is designed for continuous 24/7 operation. • Includes 2 water tanks, 325 liters each—total 650 liters on board. • The Vibemo Easy Start panel offers protection against overheating and low oil level (engine shuts off), and provides alerts for malfunctions. It also features safeguards for low water level and open valve during operation. Additionally, it displays operating hours, rpm, and alternator charging current. • The temperature control is user-friendly and shows both the set and actual temperature. • As a standard extra, a 3-way valve is installed, enabling operation at 350 bar and 40 liters per minute (also with hot water up to 100°C). Suitable for applications like sewer or stable cleaning. • Also equipped with emergency stop, interior lighting in both the engine and reel compartments. • Reels and burners are made of high-grade stainless steel (RVS). All hoses are 50 meters long as standard. • Features a water pre-filter and intermediate filter for each pump. • Equipment includes: 2 handles with 2 flat jet lances (25 degrees, 20 liters), 2 turbo lances (20 liters), 1 flat jet lance (25 degrees, 40 liters), 1 turbo lance (40 liters), and 2 pressure gauges for reading the set pressure. • 3 gauges for monitoring diesel and water tank levels—for clear and organized oversight. • Everything is mounted on a tandem axle trailer (2,500 kg, dimensions LxWxH 300x150x150 cm). • Supplied with a 1-year warranty and a full-service package. Hodpsrnkgijfx Adkeni Lead time: approximately 6 to 8 weeks. Photos are for reference and actual product may vary slightly.

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-OT-6022 3kW / VF1530-3000W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7 G - Maximum load capacity: 1200 kg - Power output: 3.0 kW - Source brand: Raycus or MAX Photonics (selectable) - Power supply: ~3x400 V 50 Hz - Protection rating: IP54 Cutting Thickness - Carbon steel: recommended thickness up to 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness up to 8.0 mm, maximum thickness 10.0 mm - Aluminium: recommended thickness up to 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness up to 5.0 mm, maximum thickness 6.0 mm Construction Thanks to its welded design, the machine offers outstanding stability. Japanese Fuji servo drives ensure high speeds with excellent precision. Tube Laser This machine is equipped with a tube cutting module. - Maximum workpiece length: 6000 mm - Clamp diameter: 220 mm Automatic lubrication system for axis guides. User Convenience Loading heavy sheets is simplified by built-in transport balls, ensuring smooth gliding during loading. Picking up small finished parts is also easy thanks to collection trolleys under the machine, which can be pulled out using a practical handle. RayTools Autofocus Cutting Head Hnjdpfx Ash Hfldodksi Option – Otinus Protect This product provides dedicated protection for your laser source. With this service, you ensure your business continuity remains safeguarded. We secure your operations so you can deliver orders on time. Option – Voltage Stabilizer Control Panel Runs on Windows with CypCut software, offering features such as design, file import/export, and work optimization. All installed software comes with lifetime licenses. The machine comes with a wireless controller. Professional Support We maintain regular contact with our customers. For each machine purchased, we add an Otinus Specialist Assist hours package. Otinus Academy Learning Software With your purchase, you will get one year of access to online courses for training new employees or refreshing your skills from previous training sessions. Free Drawing Package Every Otinus laser cutting machine includes a set of ready-to-use CAD drawings. Scope of Delivery 3-day training and machine installation - Day 1 and 2: up to 8 hours – commissioning and training on machine control - Day 3: up to 8 hours – independent operation of the machine under supervision of our technician, including custom programming of specific parts Consulting by our specialists - By phone: from 7:30 to 21:00 (Mon-Sat) – 8-hour package to be used within 12 months - Online: from 7:30 to 14:30 (Mon-Fri) – 8-hour package to be used within 12 months Access to Otinus Academy online courses - LibreCad – access valid for 12 months Additionally, you will receive: - CAD drawing package